No speakers or headphones plugged in error

Similar Questions

• Sound is played through speakers with headphones plugged?

  I had just driven back one of my audio drivers (which is Cirrus Logic CS4206A AB 78) after the last version is not about me. Who restored the sound from the computer, but after trying to plug my headphones into the headphone, I tried to play video files and the sound played through your PC speakers, not headphones. What happens, and is it possible to solve?

  Hello

  Set Microsophone as your default recording device and check if the problem persists:

  Exercise the functions mentioned below to adjust the Microphone as default:
  a. Click Start, and click Control Panel.
  b. click sound, and then a new window will open.
  c. in the new windows, click on the 'Registration' tab and right click in the window and click disabled devices show.
  d now check if the Microphone is listed there and right-click on it and choose activate.
  e. Select the Microphone, and then click "Set as default"

• Audio comes through the speakers and headphones plugged headphones

  Audio sound plays through the headphons and speakers when headphones are connected.

  Any advice appreciated

  Hello again Nervuz,

  Thanks for the quick response!

  Based on the information you have provided, I recommend to uninstall and reinstall the audio driver for your desktop. To do this, please follow this document on follow-up with the IDT High Definition Audio Driverdownload and software uninstaller (Windows 8). If this does not work and you hear again audio to both the speakers and earphones, please follow the next step.

  The next step is to run a diagnostics using Automated Troubleshooting (Windows 8)program. This should help with the audio in question.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• "No speakers or headphones are plugged ' driver problem

  Recently I had some problems with my audio devices on my HP Pavilion laptop dv6, which does not allow me to choose my own devices by default when in the window "playback devices". For example if I got my headphones plugged he always missed that and physically wouldn't let me change to 'Speakers and headphones' it just did nothing when I tried.

  To combat that I thought maybe I should try to update the drivers, this does not work either so I deleted and reinstalled them go to the HP website to find the right drivers for my laptop. However he still doesn't work and shows this:

  

  But when I right click and press playback devices it shows to be installed and "apparently working:

  

  Once more, he had the same problem not allowing not to me to choose my default but also I have now no sound on my laptop...

  I tried a lot already for example when trying to install different drivers, and a restore of the system it will not accomplish either.

  If it that someone knows that it will be greatly appreciated!

  Thanks in advance :)

  Hello Hayley,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the exact model of your laptop number?

  Please provide screenshots of the question and I also appreciate your efforts to solve this issue. We will work together to address them.

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Diagnose and solve the problems of Windows audio playback automatically
  http://support.Microsoft.com/mats/audioplayback

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• "No speakers or headphones are plugged."

  After a reinstall of windows 7, none of the external speakers work.  The reason given is "no speakers or headphones are plugged."

  What I tried:

  -Enter in the BIOS to make sure that the integrated audio system is selected (instead of link to my video card)

  -Redownloading drivers (all are currently being updated)

  A few notes:

  -Under 'Read' in the control panel > Sound, "Digital Audio (HDMI)" appears with "not connected."  There are no other options to select.

  -My USB headset works perfectly - is that the external audio is not working.  The plugs at the front and the back of the computer both don't work (which I tested with multiple devices).

  Data for the audio device are listed here:

  Name High Definition Audio Device

  Manufacturer Microsoft

  ID of device PNP HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 17DD3F07 & 0 & 0001

  Thanks for the tips - I downloaded the codecs and it works fine now. (Here: http://www.asrock.com/mb/download.asp?Model=N68-S%20UCC&o=All)

• DOESN'T HELP WINDOWS 8 NO SOUND! DON'T KEEP SAYING THE NO SPEAKERS OR HEADPHONES ARE PLUGGED IN!

  CAN SOMEONE PLEASE HELP ME UNDERSTAND WHY, AFTER A RESTORE! I DON'T HAVE SPEAKERS OR HEADPHONES SOUND IT JUST CONTINUES TO ME SAYING THAT IT NOT PLUGGED AND THEY ARE TOTALLY?  IV ' E MADE THE DISORDER SHOOT SEVERAL TIMES HE ALWAYS REPEAT MYSELF THAT NO SPEAKERS OR HEADPHONES ARE PLUGGED! I HAD HER JUST BEFORE THE RESTORATION IT IS MESSED UP SO MY COMPUTER IS WINDOWS 8 GATEWAY DESKTOP MODEL... DX4375

  ALL INFORMATION IS GREATLEY APPRECIATED :(

  Me_26

  Uninstall the current driver, then install a new one (even if it is the same date)

• NO sound from speakers or headphones

  HP ENVY 15-3033cl laptop PC

  Windows 7 64 bit

  no error message, I was watching a movie when my laptop died. I plugged it into the power source and now there is no sound from speakers or headphones when I plug. I already went through the troubleshooting steps sound but it says there is no problem detected by the device. The computer is still failry new less than a year, but lies outside of the 90 day warranty. Help please.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop and perform a "Hard Reset" for your model, as described in the document of HP here.

  One when you're done, press next to the key ESC that you start the computer to launch the Start Menu, then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Satellite A200-1AE: sound from speakers when headphones are connected

  Hello. Sorry for my English.

  I have problem when I started a player (winamp player or a movie or a game with the sound) and I want to change the sound from the speaker to the helmet by plug them into the headphone jack. The sound is still speaker.

  So I just restart this player or the game and then sound is switched to the headphones.

  So in sum up: when I want to listen to the sound of some player I have to plug in headphones first and then start the player in order reverse, the sound is not switched to the helmet line.

  In other laptops with Vista I have check this problem is not to happen.
  Do you have any suggestions?

  Hello Pawel

  I have the Satellite A200 too preinstalled with recovery DVDs. I was very curious and I tested it on my laptop. In my case everything was OK. Through the use of headphones, Laptop speakers are automatically TURNED off. Remove helmet speakers work again.

  I am really confused, and it is really not easy to say what the problem is here. AFAIK in headphone plug it is small, and through the use of headphones this past should disable Laptop speakers. All you can do is check if it happens after clean OS installation, maybe update the BIOS or install the latest driver sound.

  Sorry, but I don't see any other possibilities. If anything maybe you must contact the service in your country. I really can't imagine that this little mixer may be defective but service may only do a check.

  Bye and good luck!

• T440 - Sound does not switch between the internal speakers and headphones listening or return

  Hello community,

  Let me first explain how I assumed that the switch between headset and speakers should work:
  I turn on the music or anything else and if no headphones are connected, all sound from the internal speakers. Now if I plug headphones then sound comes exclusively from the helmet. If I go out then again the sound comes from the speakers and so on.

  In my case, the situation is the following:
  If I have no headset connected and turn on the music, then I heard if via the speakers. If I decide to continue to listen to this music through a headphone and plug them in, then the music continues to come from the speakers, but for example, the outlook notification sound is delivered in the headphones. It works vice versa.
  If I open, say youtube for a video, while having the headphone is plugged, I hear the sound through them. If I now unplugg, them, the speakers will remain silent.

  What can I do that if there is no external speakers connected (helmet, etc.) all sound will be played through the internal speakers, if I plug in a kind of external speaker, it's their part and if I unplugg it it switches back on the internal speakers?

  Thank you very much for your help!

  Best regards

  Look in Control Panel audio Realtek. It should be an option multistreaming, make sure it is set to unify all devices.

• His problem with laptop speakers and headphones

  Yes, the night last and Eve, my speakers worked very well. In the long run a moment a Skype call, I had to switch to headphones because volume speakers is weak for a reason any. Don't ask me how or why. in any case, I have it plugged headphones can hear the sound of typing the volume bar in the Volume control and can listen to music through THAT my helmet. I've heard if your not careful, you can jam the switch between laptop speakers and headphones, so I tried pulling the plug in and out a few times, not good... I have a Dell Inspiron 9400 Intel under Windows XP SP3.

  Also, I made sure all the boxes in my properties of Volume control are enabled and are uncut.
  EDIT: So, figures that my Sigma Tel Audio necessary or needed a new driver, I went to Dell.com and downloaded the last being, installed, rebooted and then suddenly I hear these little tones, sounds is fixed again. So, I don't know if this issue must meet more.

  Hello

  Thanks for sharing your resolution.

  In the future, if you come across any question relating to Windows please visit Microsoft Answers forum.

• I hear white noise when I have my headphones plugged into my laptop.

  It does not go far when I cut, and I can't hear when I don't have my headphones plugged. It changes its volume when I change the computer's volume. Any suggestions?

  Hello

  Could be improvements or older drivers even if the material is also a possibility.

  How can I stop my music skip or break down when I play?
  http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

  1. right click the icon of speaker near right lower clock - peripheral of reading

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  2. check the configuration - Device Manager - sound, video and game controller

  Note name and complete model of the audio device - full decription - now double click it.
  Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
  behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
  the driver stack.

  Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
  your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

  Then do the same for the manufacturer of the device (like Realtek or who made the device).

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  
  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cut the speakers when headphones unplugged.

  So, I wanted to know if there was a way to mitigate the speakers automatically when my headphones were disconnected. I tried the device management, but my speakers seem to be considered the same as my helmet as I use. I'm running Windows Vista business on a HP Compaq 2710p and my speakers are SoundMAX Integrated Digital HD Audio. Thanks in advance.

  Hello

  You can check to see if you have an Audio Manager in Control Panel, you can not and even if you
  do, there are maybe not THOSE that allows this. In native mode, Windows doesn't have these settings.

  A method I know to do is to have an external amp that allows to control the speakers and
  any helmet hanging on to her. You would normally connect an amp to your LINE that is not
  affected by the Volume on PC controls. You can get this connection to your headphone plug (mine
  does) with or without adapters and then volume controls affect the noise level, but you can
  still in control with the external amplifier.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Speakers or headphones not found

  My PC is Dell Dimension C521. Maintain theNOTE from the ADMINlabel: maintain the label removed by privacy policy > OS Win 10

  Can someone please advise.

  My speakers and headphones are not. I tried different speakers and I get the message that they are not plugged in. I double checked all the connections and power. All seem OK.

  I just upgraded to win 10 of Win 7 and stakeholders have been working since. Is this likely to be a driver or the card itself sound problem. I don't know yet if this model has a card or if it is integral with the Commission.

  Thanks in advance.

  http://downloads.Dell.com/published/pages/dimension-C521.html

  Description	Supported OS	Download
  SIGMATEL STAC 92XX C - Major HD Audio, v.6.10.0.5511, A04 STAC92XX of SigmaTel C-Major HD Audio Drivermore details	Windows Vista 32-bit Windows Vista 64-bit

  I watched 4 (testament) nforce drivers and nforce 430/6150 is vista only.
  nForce 430/410/405/400 with integrated graphics

  http://www.nvidia.com/object/nforce_nf4_winvista32_15.00G.html

  http://www.nvidia.com/object/nforce_nf4_winvista64_15.00G.html

  Speakers do not work no helmet because the Audio ESP or Microsoft UAA HD audio codec is not installed because the driver WIN7 and DOTNET and June 2010 Directx are not installed.  You must reinstall the Legacy driver and DOTNET support to windows features turn on Control Panel.

  Then install the OEM Vista or WIN7 or win8 32 or 64 bit drivers for your dell printer model.

  Then, everything will work again.

  DirectX redist June 2010

  Download details: DirectX User Runtimes (June 2010)

  directx_Jun2010_redist.exe
  95.6 MB
  Operating systems supported: Windows 7; Windows Server 2003; Windows Server 2008; Windows Vista; Windows XP Service Pack 3
   

  You download the file and EXTRACT TO a FOLDER then run DXSETUP. EXE as administrator.

  You also need to re activate DOTNET and legacy Direct play.
  

   

  

  Which driver is based on the Exact model of your dell AND 32 or 64-bit.

• Dell Studio 540 no speakers or headphones Sound - win 10

  My Dell Studio 540 lost out to attached speakers.  I can't tell if the problem is caused by the upgrade to win 10 or if I experienced a motherboard failure a coincidence.  I tried a number of bugs that include uininstalling pilots, roll back drivers and even install Vista drivers original I have original system disks.  Nothing works.

  I see, looking at the acoustic, Panel output HDMI seems to work because I can see where it says sound when playing music.  However, I can't the speakers or headphones of entry to work.  Even if I try the speaker plugs into one of the entrances, the acoustic Panel still shows the headphones or speakers are not connected.

  So, how can I get the systΦme can recognize that speakers have been connected?  Is there another driver I can use.  So far, I've tried several driver Realtek and configurations, does not

  Apologies for the lack of your post. The Studio 540 has never been validated for Windows 10.

  

  My advice is to disable the Realtek HD audio integrated into Bios - Advanced - Integrated Peripherals. Then install a current PCIe x 1 sound card in a PCIe x 1 on the motherboard slots. His current card will provide 10 Windows drivers.

• headphone plug broke in audio in jack on the front of my HP Desk Top

  Hello people who understand computers,.

  My headphone plug broke into the socket on the front of my HP desktop computer. Any ideas on how to get off the broken piece out?

  I need immediately this computer for school. Please any ideas? I connected to the back of the speakers cpmputer, but they do not work now. They turn on, but no sound. I'm in big trouble.

  Sincerely,

  Alice1234

  I just pulled it! First of all, I unplugged everything and put the desk on a table. Then, I took 2 pins to thin hair and take off the round tip painted with a pair of pliers. I did it because my pair of tweezers couldn't hold in it. I gently worked a PIN on the top and one on the bottom of the piece, which was stuck. Then I waved it forward and put the pieces back in place on that when they slipped. Finally, she waved her out! All this took about 10 minutes.