No video comes from the Beamer

Similar Questions

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• Satellite A200 - Crackle sound comes from the HARD drive

  Hello

  I have the Satellite A200. When I start my laptop the patter comes from the hard drive.
  Someone knows something about it?

  Thank you
  Vikas

  In my view there s nothing wrong with your HARD drive.
  My drive HARD click every time while accessing data on the laptop and everything run ok for 3 years.

  But that doesn t mean that there is no hardware problem with your HARD drive. Usually it's not easy to tell when a HARD drive wound begins to malfunction. My first HARD drive died after 6 years of use. But the other HARD drive died after 1.5 years. This damage was covered by the warranty.

  Finally, I would recommend backup your data always on an external HARD disk to prevent data damage.

  Good bye

• Large number of unwanted emails that all appear to come from the same source

  Original title: spam E

  Currently, I get a lot of junk emails that all appear to come from the same source. I was put in my blocked list but the sender then change the address source slightly and I get more. Does anyone know how I can stop this. My address change my only option

  You use Windows Mail? Assuming that the subject field also changes, you could do a message like that rule.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want that messages not in the address book to go to deleted items.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  Be sure to see these links for more options.

  A few tips:
  http://insideoe.tomsterdam.com/tips/rules.htm

  Message rules does not? :
  http://www.insideoe.com/FAQs/why.htm#rules

• My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  There is a lot of noise from speakers as well.

  Disable the hardware accelerator or install flash player 10.

• My Vaio has a sound that seems to come from the fan, is a solution for this?

  My Vaio has a sound that seems to come from the fan, is a solution for this?

  
  

• Runtime error on the desktop - no error of birdthrowing comes from the video card software

  Original title: graphics card error I guess that

  computer is turned on after 15 minutes, run-time error is an error right when I say he sometimes makes the desktop icons does not reset, no birdthrowing error is from the video card software
  How can I solve this problem

  name: Toraman Uygar

  Hello

  • What is the full error message that you receive?
  • How long have you been faced with this problem?
  • What were the changes made before the issue occur?

  You can check this link:

  Windows XP restarts unexpectedly or restarts when you shut down the computer

  http://support.Microsoft.com/kb/320299

• videos downloaded from the iphone upside down... help!

  videos uploaded from iphone are backwards.   How to rotate a video in media player?

  Hello

  What operating system is installed on your computer?

  You won't be able to shoot a video with Media Player. However, you have the option to rotate a video in Windows Live Movie Maker. If you have not installed Windows Live Movie Maker, you can follow the link below and install Movie Maker:

  http://windowslive.com/desktop/MovieMaker

  Once you download and install Windows Live Movie Maker, you can follow the steps below to rotate and save the video:

  a. you can turn video clips in Windows Movie Maker by following these steps:

  b. import the video clip in Windows Movie Maker.

  c. drag any video clip and drop it on the timeline.

  d. on the Tools menu, click Video Effects.

  e. to rotate the clip to the right, drag the effect video rotation 90 and drop it on the movie in the timeline.

  -or-

  To rotate the video clip on the left, drag the video effect rotate 270 and drop it on the movie in the timeline.

  On the file menu, click on the video file and follow the instructions of the wizard movie recording.

• Old videos downloaded from the phone will not play sounds

  original title: video phone

  video files recently downloaded from the my phone will play with his still earlier, who do not play with the sound, now are not... Troubleshooting said there is no problems, map its reports etc works well... someone has any ideas please?

  Hello

  1 did you change on your computer prior to this issues?
  2. What is the exact error message and the error code?
  3. what version of the Windows operating system is installed on your computer?
  4. what type of file format you are trying to play?
  5 are you facing this problem with specific videos?
  6. what application you're using to play the video?

  Try the following and see if it helps.

  
  Method 1:
  
  Step 1:

  If you use Windows media player to play videos, then I recommend you to install the appropriate Codecs and check if that helps.

  
  Codecs: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Codecs-frequently-asked-questions

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk

  Step 2:

  If you use any non-Microsoft player to play videos, then I suggest that get you in touch with the program to build support.

  Method 2:

  Set the audio output device by default using steps below and check if it helps.

  a. click the Start button and then click Control Panel. In the search box, type sound, and then click sound.
  b. click playback devices.
  c. Select the device by default and set as default to make sound come from specific device.
  For more information, see the following Microsoft article.
  http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds

  Method 3:

  No sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  See also:

  Tips for solving common audio problems: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• change the video thumbnails from the icon of the default program in the image of the video

  Hello, when I capture a video on the web using a download manager and place in a folder, open the folder and select "Large icons", it displays the image by default.  I want to display an image of the video.

  I tried to uncheck 'display the file on the thumb icon '.  And I tried to check it out.  It has not changed anything.

  I tried to change the 'default' program, but the thumbnail does is display the image of the new default program.

  I tried to "Set your default programs" to "Windows Photo Viewer (these are responses from Forum site)."

  Nothing works.  Can you help me?

  Thank you, Stephen box * address email is removed from the privacy *.

  Vista.

  Vista has no support for Thumbnailer for mp4 files. There are extensions of the environment that offer this feature, which can run Windows Vista.

  REF:
  Add thumbnails to all your multimedia files in Windows with Media Preview - freewaregenius.com

  http://www.freewaregenius.com/Add-thumbnails-to-all-your-media-files-in-Windows-with-media-preview/

• Windows Live Movie Maker: What happened to the function "Capture Video Device" from the good old Windows Movie Maker?

  I am running Windows 7 (64 bit) and Windows Live Movie Maker 14.0.8091.0730. Good old Windows Movie Maker that came on Windows XP, I could add video capturing directly from the video device (my webcam). In this new version of Movie Maker extra in Windows 7, I can't.

  How can I add this feature in this new version? Why it was deleted?

  Hi romzap,

  The feature you found in Windows XP Movie maker to add video to your video device, such as webcam, who called such as Capture video device has been replaced by the name Windows Live Video acquire Wizard. For more information on how to import videos and work with Windows 7 Live Movie Maker things, please visit the link below.

  ·         http://windowslive.com/desktop/MovieMaker

  Hope this information helps you.

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Qosmio G50-12 q: no audio signal while moving the video files from the camcorder

  Hello

  I have a portable PC Toshiba Qosmio G50 - 12 q with 640 GB HARD drive, and equipped with 4 GB of Ram saw the Completed window system upgraded to the version of service pack 2

  I connected the video camera Sony PC 115 to the PC via the I.Link IEEE 1394 cable while that I import a video to Window Movie Maker in order to save it.

  At the moment where it is reproduced in the form of Movie Maker, I see the video reproduced the video camera but don't feel no audio. Then when I'm done for import video I want and he always see in Movie Maker, the program reproduces regularly or video he recorded or the audio exactly I didn't think it was important while it.

  It ' is usually?

  Working group than in the phase of import that I would have to see and feel or the audio video. Task not is defective cable because when I see the video recording in Movie Maker I feel also the audio base, means that the audio has left the video camera, is entered into the PC via the I.Link recorded it.

  To the point, I can hear the audio in the phase of transfer / import video or any other audio device from the camera / video, I have to in case of change inside of Window Movie Maker or the window given some details of formulation considers also the I.Link Jack specifically?

  Or the cable is connected between the video camera and PC with purpose there details? Even if it seems to me have connected well it boom ' as I have said, l "audio is saved."

  Thanks and greetings

  I have Sony camcorder DCR-TRV520E and in the past, I recorded several movies on my laptop.
  I used the Ulead Movie studio application and everything was OK.

  10 minutes ago that I tested it with Windows Movie Maker (Vista) too. Here a few facts:
  -My cam Sony is recognized correctly
  -Started Windows Movie Maker and chose the option IMPORT > digital video camera
  -Traveled in the right folder
  -On the next stage of the single application started rewinding videotape
  -Importing video has begun only and when finished I checked it and the sound was there.

  Later I chose the option "publish on" > this computer and after 20 minutes it was all over.

  I just use the firewire cable. Nothing special.
  I really don't understand what's wrong there.

  East - the first time do you it?

• Paviollion HP HPE 112Y - no video SIgnal from the computer - monitor works

  I have a desktop HP Pavilion HPE 112Y.  About two weeks, the video has stopped working.  I replaced the HDMI cable, we replaced a VGA cable, etc with no luck.  I plugged in the screen of my laptop and it works fine, then it is certainly the office.  All I get is a message "No. Sigmal video»

  I tried to connect the monitor directly on the edge of VGA video connection - without going through the video card.  No luck.

  .  I can not get the system starts from the CMOS or restore screen.  Hard drive runs, but goes into the cycle of continuous type "whiring.

  System is about 2 years old, running Windows 7 64 bit.

  Help!

  Hello

  Try this procedrue:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a.  You can buy a can of compressed air to blow the dust out of the heatsink from the CPU.  Plug your PC back in and give it a go.

  If the above does not help this procedure: power.  Do not skip steps.

  Finally, try to clear the CMOS memory.

• RE: Froyo 2.2 for Nexus One version comes from the official website of Android

  Sweet Georgia peach son, why a bike out employee and Manager of forum have access to thread locking here?  For not to mention the person owns a Backflip and not a droid. In addition, still not sure how the article could be interpreted as piracy since it is on the Nexus One.  I found it interesting that they can actually have the final version of Froyo ready... I'm not download the OS on my Droid, but it's good to know there's progress.

  @RSIMS26

  Our MOTOXPRTs are volunteers from the community. As moderators on other sites, we provide private moderator in order to keep the orderly community. This includes a variety of things to maintain the security of the community for everyone and in the Community regulation. I do not consider it an interesting article in the DROID community because it has nothing to do with the DROID and we have a page that contains update information that it will be available. Whether if it's official, they connect to phandroid who is not an official site. Shouldn't they link to the page of Google if it's official?

  If you wish to discuss further... Come to the managers Office.

  Locking thread.

  Mark

  Support Forums Manager

• How to extend video back from the beginning

  My video editor tells me that I need to have 2 seconds early and end 2 seconds do not talk and repeat basically the first or the last displayed image.  I have currently only about 1/2 a second so I need extend backward and before 2 seconds.

  It seems that I can simply grasp the handle at the end of the video to extend forward, but I can't figure out how to extend it back from the beginning. When I take the handle, I can ' drag it to the left.

  In addition, my video is essentially a timeline I have razor cut into about 10 modules.  each module is marked with markers on the timeline.  What is the best way to add the padding forward and the end of each module?  I started lasooing and by dragging the last video, move the marker, then second lasso at the last, move, etc.  Is their an easier way to do this?

  Thank you

  I think the answer to your prayers is insert the Segment to hold image command. First assign a keyboard shortcut to the command. The extent of the workflow, I'm only being familiar with the feature, but I think it goes something like this.

  1. Open the sequence
  2. Move the playback cursor at the beginning
  3. Insert the wedge Segment of image
  4. Move the playhead to the end
  5. Insert the wedge Segment of image
  6. Close ff. A, open B next, repeat 2 to 6...