No WLAN light

Similar Questions

• Spectrum 13D - 3000 ultrabook: cut the light and the wlan light always on

  My system just upgraded to version 10 1607 windows.

  It works fine except light mute and wlan led on that both remain.  The keys work, but the lights stay on, regardless whether the audio is muted or airplane mode is on.   Seeing CAPS works very well.  Both LEDs lit when you press f5 the keyboard backlight disabling.

  The system spectrum 13D - 3000, model E5E03AV.

  I guess it's an updated bios, but don't know how to fix.

  Hi @khjr4,.

  Thank you for the update.  As I asked if all updates have been made, and you specify that this is what solved the problem, would you consider tagging this post as "accepted Solution", to help other members and visitors to find this information if they have the same or similar problem? To say thanks for the help, please click "Thumbs Up icon" below.

• Satellite M70 - ConfigFree - error turn the WLAN light

  ... morning...

  I know I've seen a lot of articles on the Internet about this problem, but, so far, not correct answers or solutions.

  In Satellite M70, although wifi turns the front is 'ON' and led lights, ConfigFree sounds and shows "error...". Turn on the switch"and also is anable to find wifi devices all around.

  I have the latest drivers, the latest version, I disabled the wifi MS. program control... nothing. !!!
  Is not a big problem, wifi works, but it seems a troublesome BUG for Toshiba...

  Bye of the Italy
  Renzo

  I doubt s a Configfree bug.
  The Configfree is pre-installed on my Toshi and it of running great.

  Here's a brief info how to use Configfree:
  http://APS2.toshiba-tro.de/KB0/HTD9202JI0000R01.htm

  Notes; This message appears if you have not activated the WLan correctly!
  It takes the WLan switch on WE (LED should appear) and in addition, you will need to use FN + F8 to activate the WLan

• No WLAN on Satellite Pro 6100 light

  Hello
  I have a Satellite Pro 6100. But there is no Wlan light, if I turn on the wlan switch. I did a Bios Update to 1.9, but wifi does not work.
  Is it possible that the on-off wlan switch is damaged, or what could be the problem?

  Hello

  Did you check if the wireless card is already preinstalled on you laptop.
  Have you ever used this option?

  I agree with you... it of not impossible that the WLan switch on the side of the laptop is broken.

  The switch allows you to activate on the motherboard and allows the WLan antenna.
  If there is a hardware malfunction for example a loose contact outside help is necessary. In this case, the ASP must check the unit

• Satellite L20-153 may not get the WLAN to work

  Hello world

  I have a problem with my laptop wifes that I've not been able 2 fix.

  Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

  When it restarts the same problem appeared (flashing marker and nothing happens).
  So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

  2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
  After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

  I tried to disable it and then turn it on again but it doenst help.

  I also tried once more to use the Toshiba recevory drive but you have the same problem.
  So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

  There isn't any conflics material.

  So now I need your help about how to do 2.

  tanks a lot.

  Kind regards

  Quickhat

  Hello

  On WLAN, there is actually no philosophy, and few things are important:
  The wireless network card must be installed properly (properly listed in the Device Manager) and
  It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

  After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
  To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

  Have you tried rebooting your WLAN router and restart analysis the WLAN area?

• WLAN is unable to allow my Satellite A200

  Hi people!

  I have an A200 (PSAE6E) running under Windows Vista 32. Intel wifi link 4965AGN wireless card. vs 12.2.0.11.

  I can't have a wireless card works at all.
  Hardware button is enabled; Software control F8 is enabled;
  ConfigFree and Task Manager 'said' it's all ok.
  But the center of windows network just can't turn it on.
  Windows Network Diagnostics (what is the right way to write it?) can not solve the problem.
  I'm just nuts with it.

  Any ideas?
  Thanks in any case.

  I don't know what the problem is here, but the fact is that the wireless network card must be turned on if:
  WLAN switch is activated and the WLAN light should be as WE
  FN + F8 using the WLAN card must be assigned to too

  So, if you think that two parameters are passed to start Toshiba Assist > ConfigFree > WLAN and run RADAR to see if your WIFI at home will be detected correctly.

  Please post the result.

• HP Pavilion a6433.fr Desktop: wlan need driver

  Hello

  I had to reinstal windows on my computer today. After I couldn't find a driver for my 802.11 Wlan. He worked before reinstalling windows and 2 years ago, I found a driver on the web, it won't work this time, when I installed a driver.  A: this is

  USB\VID_148F & PID_5372 & REV_0101

  I found a driver on the web, but after installing it (she did the wlan light up during installation) I must deconnect and reconnect and then click on the new material instalbox which opens onto the bottom of the screen. After I go and search for the driver but it fails. It will not work.

  Can someone help me please.

  Thank you

  Hello:

  According to the specifications of your PC, it came not with the wireless network card.

  When I google the hardware ID you posted, it decodes as a Ralink USB a wireless controller type.

  The only suggestion I can offer is to try the driver directly from Mediatek (Ralink).

  USB (RT2870 / RT2770 / RT307X / RT2070 RT357X / RT3370 / RT8070 / RT5X7X / MT7610 / MT7601/MT7612U)

  06/05/2015

  2k/XP:5.1.21.0 Vista: 5.1.21.0 Win7:5.1.21.0 Win8:5.1.21.0

  XP 32/64, Vista 32/64 Win7 32/64 Win8 32/64 Win8.1 32/64

• LED light for Wi - Fi on Satellite L40 - 14F does not illuminate

  Is he someone correct the problem with LED light for Wi - Fi on L40 - 14F?

  What do you think average is by any fix for the WLan light

  Are sure you that you have enabled the WLan switch on the side of the laptop?
  Only this switch controls the WLan light!

  If the WLAN led does not illuminate after that you have activated the WLan switch there is something wrong with the hardware.

  then if there is something wrong with the hardware of notebooks is needed the help of ASP.

• Satellite M70-394: WLan does not work after wake up from sleep mode

  Hi all...

  I have a problem with my WLan connection and hope that one of you may be able to help. From my computer is turned off, it is not a problem with the WIFI connection but if I put the computer to sleep by closing the lid and then restarting it from there the led lights up briefly to wi fi but then and is the only way I can connect via a cable.

  Any suggestion would be appreciated gratefully.

  Hello

  What happen exactly when you open the lid? Generally, the WLAN light should be on and after 20 or 30 seconds, the WIFI network should work again.

  I recommend you to check the FN + F8 key combination to see if WIFI is always enabled. Alternatively, you can try to install the latest version of the WLAN driver.

• CQ50-NR215: bad recovery

  This Compaq CQ50-NR215 continued to get slower over time. It was purchased at BestBuy and came with (2) "GeekSquad" recovery CD - as opposed to a Microsoft OS disk? The backup of my data, I went with Disk1 - which he said successfully did something with the partition. Second step was installing original software. He won this stage and gave ERROR 1005. After removing the CD, the laptop did not start, indicating that a device in the boot sector was not present.

  It so happened that I had a CD of Vista operating system from another computer so I inserted the CD and tried to restart. After asking to fix/install windows (I chose install), he seemed fine. The welcome message appears & says "Prepearing your DESKTOP computer for first use. It starts very well, the user interface appears intact. The problem-

  The WLAN light on the laptop which is red when this is turned off/blue when on remains-red & will not turn on. In the Device Manager, I can't find any network card. A section called "Other devices" is highlighted in yellow indicating a question - when you select other devices, a submenu appears, and the following list is present (see photo)

  Coprocessor

  Ethernet controller

  SM Bus controller

  Unknown device.

  Download section of the HP driver, I downloaded what I thought, it is maybe the chipset suitable for a flash drive, then moved to the computer laptop & installed. Still nothing.

  It was suggested that I be able to plug an ethernet straight cable from my router to the laptop and access than average internet - failed, no access.

  My first impressions are that the CD I have installed from was designed for an older desktop computer, not having no internal not the software to make use of the wifi.

  Any help is greatly appreciated. I can't believe so much is wrong with her, that she needs a few hundred dollars in a computer repair shop - when the value of this cell of aging is certainly lower than that.

  You are the very welcome.

  Try these drivers for the wireless card and the unknown device...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-80784-2 & CC = US & DLC = in & LC = on & os = 2093 & Product = 3795238 & sw_lang =

  Your screenshots didn't erase the censorship screen yet, so I can't see them.

  Once they clear, I'll see what else could be the problem.

• L50-A-10 q satellite: Win8.1 Pro Wi - Fi status LED does not

  Hello

  I have a laptop Toshiba L50-10-to-10 q running BIOS Version 1.30 and THIS Version 1.10.
  I've recently updated to Windows 8 for Windows Pro 8.1.

  I followed the update instructions found on the driver download page.
  All modules (Wifi, Bluetooth, etc.) and the function keys work just fine.

  However, the status LED does not work correctly.
  For Wifi, the status light is always off, even when the Wifi is turned on and connected.

  The State LED to the touchpad is also always off, even when it is disabled.
  SEEING supply and load indicator work fine.
  All the State LED worked correctly before the 8.1 update WIN.
  Is there a solution for this problem?

  Kind regards

  Niko

  Why you n t trying to update or reinstall the driver Intel WLan and driver of Toshiba system yet?
  Since this procedure has allowed to solve the problem of touchpad and I guess that that would solve the problem with the WLan light too.

  [Intel Wireless Lan Driver 16.0.2.1.0.s64 for Windows 8.1-64bits | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 7948 selSh 3983 = ortMod & language = 13 & selOS = 46 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 88542 & OSI D = 46 & driverLanguage = 42]

• Wireless computer network laptop dv7 sometimes stuck out

  Hello.

  So, for a while, I had this problem with my laptop; sometimes without any reason my wireless 'goes out' and my laptop gets all the lag (trolling, mouse sound as well). In fact, the WiFi network is not extinguished, but only the blue light on my laptop turns red. Wlan exchange button the following message (on/wlan Wlan off) but no connection is established and it remains red, stuck like that.

  For a long time, I found the only way to solve this problem, to restart the computer. However, sometimes, it did not help until after two resets. Some time ago my brother was using my laptop and as the same problem has happened, he goes to the web settings and Control Panel, a list of all possible connections. Here as an administrator he removed using WiFi connection and then begins again, which fixed the problem. The connection has been made again, and the LAG was gone.

  Now, just before this announcement I had the problem once again and found a way of my brother to fix. Since that part, the problem is resolved, but I would like to know what causes this and how can I get rid of him? It's really frustrating when internet turns off randomly and I have a huge lag, so in the middle of something important. I never found anything like this online, searching around with Mr. Google and eventually sign up here to ask.

  Thank you in advance.

  Some information on the laptop:

  HP Pavilion DV7 VT362EA #UUW (no idea if that's the correct number ^^)

  Windows 7

  TL; DR

  Sometimes the wlan light turns red if the WiFi network has not yet been decided. Loss of connection and get a huge lag. Only difficulty is to reboot or remove wlan to use as an administrator.

  Ok. No, it looks like you did it correctly. I have a few other things for you to try so.

  1 to update the software Quick Lauch buttons. Restart and test the question. If you still get the same symptom, go to step 2.

  2. reinstall the wireless card. Here is the manual. Wireless (WLAN) card withdrawal begins on page 4-17. Make sure that the antenna wireless caps are broken pointing down when you put it back in. If you still get the same symptom, go to step 3.

  3. reset TCP/IP. Here is a link to the steps. It says XP at the top, but it's just a special note for XP users. Scroll up to the gray heading "I solve the problem" and then in the second below, subsection you will see the steps for Vista /7. Be sure to run as administrator command prompt.

  Let me know the results when you get a chance

• WIFI does not work on my Satellite L650D

  Hi all...

  On my laptop, the wireless light is orange and won t work...
  When I got the laptop connected to the Ethernet cable, it works fine but the minute that I remove it, it turns off.
  Anyone know my problem?

  Thank you

  Hello

  I guess that LAN connection works properly and you can access the internet using LAN.
  But the WiFi does not work even if the WLan light is on. Is this good?

  I m wondering if you have activated the WLan with the FN + F8 keys.
  Have you tried that?

  You have configured the WiFi network properly? I mean that you must make sure that you have chosen the good encryption (WEP, WPA, WPA2, etc.) and the right encryption password!

  You can also disable all the security settings on your router and was able to connect the notebook to open WLan but it must be done only for testing purposes.

• I lost the Internet connection on my Satellite C660-1F1

  Hi to you all

  My problem is until last week I had installed on my Satellite C660-1F1 internet.
  Now I ve lost connectivity, I can t enable wireless by FN + F8.

  It s saying not available on my device connection. Could someone give help, please?

  Hello

  On this virtual path, it is not easy to say what the problem is here, but I guess that there must be a mistake.

  At first be sure that your router is working properly and the WIFI is enabled it.

  Check it please as next step WLAN on your laptop satellite. Open the Device Manager and check if the WLAN card is installed and registered properly. Next step is to activate the card wireless network on your computer.

  If your laptop is the WLAN light remember that power is on. If everything is OK check if your WLAN is visible for your laptop.

  Please check it and send comments.

• Qosmio F20 - display driver

  Hi friends...
  I use Qosmio f20 notebook in which I am not able to install the driver of VGA card.
  When I try to install NVIDIA 6600 say no compatible driver is for the hardware.
  could someone help me with a remedy.

  Concerning
  Raja.

  Hello Raja

  Drivers for graphics on laptops are suitable for mobile use. With other words, is a sort of version lite. A common on laptops problem is overheating. Because of this the laptop manufacturers offer such version to protect the graphics card and avoid unexpected interruptions.

  Please use version provided by Toshiba only and you will be on the right side. A lot of people are trying to manipulate the drivers and install them. It can work well but with the risk.

  To activate the Bluetooth key combination FN + F8. Of course, don't forget the switch WLAN is also turned on and the orange WLAN light is on.