NON MI APRE SPOTIFY

Similar Questions

• How can I fix low ram memory?

  OS X El Capitan

  10.11.3 version

  MacBook Air (13 inch, early 2015)

  Processor: Intel Core i5 to 1.6 GHz

  Memory: 4 GB 1600 MHz DDR3

  Graphics card: Intel HD Graphics 6000 1536 MB

  Storage: 49,68 free GB of 120,11 GB

  My computer is incredibly slow most of the time. Is not an expert in this field, I google and discovered CleanMyMac 3 and downloaded because it had a good rating on CNET. While it has deleted unnecessary files, I can't say that he did a lot with the memory and the slowness of my computer. I have lots of storage. I do not use anything like Photoshop. Usually the most I do is listen to Spotify or Amazon Music (he said would not be a problem one Apple when I bought it). When my computer is running slow, I leave Spotify (not just close the window) or Amazon nearby. Often I need to open Microsoft Word with Safari while working on a ballot in permanent Contact. I tend to keep multiple tabs open in safari so I shut them down when I noticed. Often quit all applications non-Safari, including Spotify and closing all but one or two tabs in Safari still do not help. I understand that Apple solders the 4 GB to the motherboard (or whatever that it's called... I'm no expert), making it impossible to upgrade memory. What choices do I have? Help, please!

  Since you can't upgrade RAM, you should minimize the use of all that is not essential so that you do not have too many concurrent processes. This is what causes the computer to get finally subdued. In addition, get rid of my own Mac. You don't need, and it's a waste of money and memory. Don't forget to use the uninstaller if she a. Removing the application removes all other files that it installs.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• Site to Site VPN Phase 2 problem

  Hello

  I have a problem of IPsec VPN. We have an ASA 5580 to build the VPN site to site with ALU VPN gateway (from partner). The VPN connection is not established. We have checked configurations of devices pair but not found so far any problem. I tried to debug crypto isakmp 127 and got newspaper as below. We always try to find the root cause of this and I could have your advice for the Please this problem? Thank you. (Actual IP address are changed for privacy)

  Drawing1.jpg

  

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, IKE SA proposal # 1, turn # 1 entry overall IKE acceptable matches # 2

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, build payloads of ISAKMP security

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, building the Fragmentation VID + load useful functionality

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + HER (1), SELLER (13) + NO (0) total

  Length: 104

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Message RECEIPT of IKE_DECODE (msgid = 0) with payloads: HDR + KE (4), NUNCIO (10) + NO (0) total

  Length: 180

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, processing ke payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, processing payload ISA_KE

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, processing nonce payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, building ke payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, building nonce payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, build payloads of Cisco Unity VID

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, constructing payload V6 VID xauth

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, Send IOS VID

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, ASA usurpation IOS Vendor ID payload construction (version: 1.0.0 capabilities: 20000001)

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, build payloads VID

  Apr 08 10:43:45 [IKEv1 DEBUG]: IP = 1.1.1.1, Send Altiga/Cisco VPN3000/Cisco ASA GW VID

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, connection landed on tunnel_group 1.1.1.1

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, the IP 1.1.1.1, Generating keys for answering =...

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR, KE (4), NUNCIO (10) + (13) seller +.

  SELLER (13), SELLER (13), SELLER (13) + (0) NONE total length: 256

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Message RECEIPT of IKE_DECODE (msgid = 0) with payloads: HDR + ID (5) + HASH (8), NOTIFY (11) +.

  NONE (0) overall length: 92

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, payload processing ID

  Apr 08 10:43:45 [IKEv1 DECODER]: Group = 1.1.1.1, IP = 1.1.1.1, ID ID_IPV4_ADDR received

  1.1.1.1

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, the IP 1.1.1.1, payload = hash of treatment

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, calculation of hash for ISAKMP

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing notify payload

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, connection landed on tunnel_group 1.1.1.1

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, building the payload ID

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, build payloads of hash

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, calculation of hash for ISAKMP

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, building dpd vid payload

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + ID (5) + HASH (8), SELLER (13) + NONE

  total length (0): 84

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, PHASE 1 COMPLETED

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Keep-alive type for this connection: None

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Keep-alives configured on, but the peer does not support persistent (type = None)

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, timer to generate a new key to start P1: 21600 seconds.

  Apr 08 10:43:45 [IKEv1 DECODER]: IP = 1.1.1.1, IKE Responder starting QM: id msg = 0dbcde8a

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, Message RECEIPT of IKE_DECODE (msgid = dbcde8a) with payloads: HDR + HASH (8) + a (1), NUNCIO (10)

  + KE (4) + ID (5) + ID (5), NONE (0) overall length: 524

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, the IP 1.1.1.1, payload = hash of treatment

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing SA payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing nonce payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, processing ke payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, ISA_KE to PFS treatment in phase 2

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, payload processing ID

  Apr 08 10:43:45 [IKEv1 DECODER]: Group = 1.1.1.1, IP = 1.1.1.1, ID ID_IPV4_ADDR received

  2.2.2.2

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, data received in payload ID remote Proxy Host: address 2.2.2.2.

  Protocol 0, Port 0

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, payload processing ID

  Apr 08 10:43:45 [IKEv1 DECODER]: Group = 1.1.1.1, IP = 1.1.1.1, ID ID_IPV4_ADDR received

  3.3.3.3

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, data received in payload ID local Proxy Host: address 3.3.3.3,.

  Protocol 0, Port 0

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, the IP 1.1.1.1, QM IsRekeyed its not found old addr =

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 1...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 1, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 2...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 2, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 3...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 3, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 4...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 4, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 5...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 5, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 6...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 6, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 7...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 7, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 8...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 8, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto, check card = Outside_map, seq = 9...

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, static checking Card Crypto = Outside_map, seq = 9, ACL does not match

  Proxy src:2.2.2.2 dst: 3.3.3.3 IDs

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, tunnel IPSec rejecting: no entry for crypto for remote proxy card

  2.2.2.2/255.255.255.255/0/0 proxy local 3.3.3.3/255.255.255.255/0/0 on the interface outside

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, sending prevent message

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, constructing empty hash payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, build payloads of hash qm

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = 456db437) with payloads: HDR + HASH (8) + NOTIFY (11) + NONE

  total length (0): 576

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, the IP 1.1.1.1, QM WSF error = (P2 struct & 0x3d51e058, mess id 0xdbcde8a).

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, history of mistake IKE responder QM WSF (struct & 0x3d51e058) .

  : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG -.

  > QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, sending clear/delete with the message of reason

  Apr 08 10:43:45 [IKEv1]: Group = 1.1.1.1, IP = 1.1.1.1, removing counterpart table correlator failed, no match!

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, IKE SA MM:db841932 RRs would end: MM_ACTIVE state flags

  0 x 00010042, refcnt 1, tuncnt 0

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, IKE SA MM:db841932 ending: flags 0 x 01010002, refcnt 0,.

  tuncnt 0

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, sending clear/delete with the message of reason

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, constructing empty hash payload

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, building the payload to delete IKE

  Apr 08 10:43:45 [IKEv1 DEBUG]: Group = 1.1.1.1, IP = 1.1.1.1, build payloads of hash qm

  Apr 08 10:43:45 [IKEv1]: IP = 1.1.1.1, IKE_DECODE SEND Message (msgid = c1606511) with payloads: HDR HASH (8) + DELETE (12) + NONE

  total length (0): 80

  Apr 08 10:43:45 [IKEv1]: ignoring msg SA brand with Iddm 2781184 dead because ITS removal

  Apr 08 10:43:46 [IKEv1]: IP = 1.1.1.1, encrypted packet received with any HIS correspondent, drop

  It is Phase 1 ends successfully, but when the remote end sends the traffic that must match your crypto card and put in place a Phase 2 IPsec SA, it does not match:

  Rejecting the IPSec tunnel: no entry for crypto for remote proxy card

  DoubleCheck that "2.2.2.2 to 3.3.3.3" is to map your end crypto (and that the obverse is located in the remote side).

• Server error led

  Ho UN con ebook downloaded it mio iMac 24 dal sito IBS, needing nella request he formato PDF, che difatti device nell'icona front.

  POI mi arrived he formato CMHA e non so apre UN "del server error." MI è stato di 'disautorizzare' the account by ripristinarlo, my mid suggerito if dice che la cosa ' e' impossibile.

  Come debbo comportarmi?

  Grazie e staff.

  Did you check the steps of this access hidden Mac OS library files?

• the cloud tendina creative sul desktop e bloccata in carica, so apre e if hot my bianca e vuota, non è nessun programma da installare e

  the cloud tendina creative sul desktop e bloccata in carica, so apre e so hot my bianca e e vuota, non è nessun di programs list da installare

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

• Problem with Media Player, Itunes, Spotify, etc., playback of music files.

  Windows Media Player, the new app music, Spotify... I even downloaded iTunes to try. NOTHING played music files. Windows Media Player just showed a red "x" next to any file was attempted. ITunes, Spotify and others just simply never begin when you click on play. The game starts and stops with no movement of the cursor or time.

  The audio was working with some programs. Like Windows Live Movie Maker, when I imported a music file to a video, it plays very well. All the sounds of the OS worked fine. Internet audio everything worked fine. Yet, none of the standard programs music would play all files. Nothing seemed to work.

  It was the audio drivers all the time! I never had no driver works partially, with some programs and not others, like this before.

  Anyone else having this problem?

  However, I was able to reinstall the drivers to operate.

  Hello

  Thank you for an update and share the information that helped you solve it. This would help other members of the community to solve these problems.

  Please let us know if you have more queries on Windows.

• LR 5 non legge Nikon d5500 has been added NAVE

  I would UN aiuto ho LR 5 my mi non apre i NAVE della Nikon d5500 grazie has been added

  @

  You can buy Lightroom 6/Lightroom CC 2015

  OR

  You must use the FREE Adobe DNG Converter to convert your DNG NAVE and then import the DNG in Lightroom 5

• I just new iPhone 7 & when I transfer, none of my music is available offline (purchased and apple's music program), trying to figure out how I can download it all at once, without having to enter each individual album and click the cloud

  Just got the new iPhone 7 & when I transfer iphone 6 iPhone 7, my music has arisen on the phone, but none of my music is available offline, try to understand how I can download all at once for use offline, without having to enter each individual album and click the cloud.  I have a lot of music on my phone, would take me forever to individually download each album one by one for offline use.

  I have both bought albums/songs itunes and also many of the monthly music apple package.  In any case for all it all at once?

  Hello

  You must use the same identifier apple

  Go down homepage itunes page where it says more about this music bought to display

  And download

  For music apple if its does not sign of apple ID then sign.

  See you soon

  Brian

• I downloaded this new program, and none of my music videos work. What should I do?

  I downloaded the new sierra and none of the videos of music works. What should I do?

  What have you downloaded?

• All of a sudden I lost all my emails and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  I suddenly lost all my emails on my Ipad and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  Have you tried to delete the account and adding it back?

• I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  Hi mweedn!

  I understand that you see a reduction in the battery of your iPhone 5s after updating to iOS 10. It is important to be able to make full use of your iPhone! There are a few resources that can help.

  Before the resolution of the problem, were you able to view information using your battery on your iPhone? Here's how to check the amount of battery used by each application:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you answer, remember to let us know if you see all the apps with an abnormal amount of battery. See you soon!

• ID/faces of the people in the Sierra pictures, pulling up the non-functional names

  Someone knows how to fix this? Is it a new setting I'm missing? I've already sent feedback to Apple.

  Photos, when I come across a photo of a person without a name, I can click on the field "no name" and a list of names appears. In the Sierra, however, the list includes names of new non-functional based on the e-mail addresses that are causing problems with my library.

  For example, if I type my name, I see three suggestions:

  1. my full name, with the thumbnail associated with my Photos 'face '.

  2. my full name with my email from Apple below address and the photo of my Contacts entry

  3. my full name with a secondary e-mail, which I have also listed in Contacts, with no tile

  If I take 1, everything works as usual.

  If I take 2 or 3, Photos makes a new person with just my name. It does not automatically fill in the rest of my name. I find myself with two entrances of the person, one with my full name and one with my name. I then merge these. This happens with all the people, not just me.

  I have the same problem. When I want to manually add a face without a name/person, I get very often 2 proposals:

  (1) the person sought with the profile photo, the first name and family name. If a picture is displayed, this means that I have already assigned photos to this person.

  (2) the same person, with or without a profile picture, with name, surname and e-mail. This proposal seems to come from my contacts, because it shows the same profile photo and mail the address I have for this person in my contacts.

  If I add the photo to the contact person, the person is added as a person in Photos. But with only the name, not the name, which is a little ridiculous, especially when you are systematically adding people and having many with the same name.

  I merge the two to get back 1 "individual" in photos, with first and last name (first and last).

  So somehow Photos is not capable of matching 'people' in photos to anyone in my contacts list. Even when you merged the two and said Photos this way they need to be put in correspondence.

• Messages are not send to non-Apple users, is no longer syncing with iPhone

  I can't use Messages to send messages to non-Apple users ("your message cannot be sent.'), or it syncs with my iPhone. I have all the settings in place, it has just stopped working.

  Hey Tux Kapono,

  I understand that you have updated to macOS Sierra, and now you can not send SMS messages. I know it's nice to be able to have continuity in your messages on devices, so I'm happy to help you.

  There are a few settings that should be checked to make sure that everything is correctly configured for this feature. This article has more information on the subject:

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support
  

  Set up SMS and MMS messaging

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

  Thank you for using communities Support from Apple. See you soon!

• Spotify on iWatch

  Can Spotify iWatch sync playlists 2 so I can go without my iPhone and listen to music through my Bluetooth headset?

  Hello

  Spotify does currently not support listening offline on Apple Watch.

  If you want to submit suggestions for the developer, you can do so here:

  https://support.Spotify.com/UK/account_payment_help/troubleshooting/how-can-i-co Outlook-spotify.

• Bluetooth Airpod and non-Apple devices

  Dear Sir

  I have laptop (Lenovo) with bluetooth Jabra wireless headset.

  Could I use the most recent Airpod with my laptop or any other non-Apple bluetooth device?

  Best regards

  Denis Miller

  Hello

  Airpod will work with non-Apple devices that use of plug in charge of Bluetooth headsets, but in doing so will not provide specific features of Apple.

  When you use Airpod with Apple devices, users can benefit from automatic installation, Siri features and intelligent switching (with iCloud and macOS Sierra, iOS 10 account or watch OS 3).