Non-unicode Unicode Essbase

Similar Questions

• Problems related to the evolution of the language of non-Unicode programs

  Hello world!

  Product name: HP Pavilion dv6-6093ex

  Product number : LM610EA #A2N.

  My 7(464Bit) Windows Ultimate and its base language, and the language is English.

  The built-in languages (English, French and Arabic) (re-uploaded and re-installed came by the person making the installation of Windows disk). So, during the installation of Windows 7, these three language listed for me to choose one of them to be the base language and display the language, I choose 'English'. At the end of the installation, there are pre-packaged trilingual (French, English and Arabic) can be used as a display language.

  I wish a good want to confirm for me why I was confronted with these problems when changing the language for non-Unicode from English to Arabic programs.

  First: After I installed the AMD graphics driver high definition (sp55092) 8.882.2.3000 on my laptop. The content of the of Intel Graphics and Media Control Panel are partially shown in Arabic while the language of the non-Unicode programs is Arab, however, they appear completely in English and the language of the non-Unicode programs is English.

  A: I found that content from the Intel Graphics and Media Control Panel are displayed partially in Arabic second screenshot below, however, when click on options, for example "graphic properties" in Arabic, the second window appears in English) while the language of the non-Unicode programs is Arabic, and it doesn't matter what format or location is.

  

   

  

  B - when I changed the language for non-Unicode programs in English.

  
  

   

  
  
  I found that content from the Intel graphics card and the media control panel is completely displayed in English.

  

  Second:

  Has- single Arab all content will be posted encryptely while the language of the non-Unicode programs is English

  

  

  B- all Arab content displayed correctly in language for programs no Unicode is Arabic.

  

  

  Third: an error extraction of the drivers and the software downloaded from the official website of HP while the language of the non-Unicode programs is English.

  A-  I noticed an error extracting all kinds of compound files (drivers and software) downloaded from the HP Web site, while the language of the non-Unicode programs is English and some location and format are:

  

  

  

  B- While the language of the non-Unicode programs is Arabic, however there is no mistake in the extraction of files.

  

  

  In conclusion, is it normal for you all the content of the of Intel Graphics and Media Control Panel partially appear in your native language for non-Unicode programs is your native lanague, however, they appear completely in English and the language of the non-Unicode programs is English?.  IF so I would say that if I wanted the content of the documents in my Arabic language to be displayed correctly, and then I need the language for non-Unicode programs be Arabic. Is what is happening with you so?

  Also, if I need to extract all kinds of compound files (drivers and software) downloaded from the HP website, then language for non-Unicode programs needs to be in my English Arab lanague and some location and format are. Is what happened with you so?

   

  
  I'd appreciate strongly any clarification on your part.

  Cooperator salvation,

  I saw your post about language issues, and I'll be happy to help you. What you are experience with languages is normal. The base operating system is in English, and while you can change the display language at the heart of the core of the operating system would be in English.

  The reason why the Intel graphics and Media Control Panel is in English and the rest in Arabic because the driver would have been designed in English and is coded in the driver, but the display language is set to Arabic hard. Thus, when the language is set to English everything will be in English.

  You have issues pilots extraction when you attached to the language English is because the HP site will determine where in the world you and when you download the driver it will be the language appropriate to the country, you are. So when he extracted it will look appropriate with the help of Arabic extraction path but everything is in English. It worked without problem when you're in Arabic because the driver can read the path correctly.

  Thank you

• Several languages non-Unicode without reboot?

  I recently got a new captioning program to add subtitles (Arabic, English and Japanese) at my youtube videos. The problem is that I can't get the program read more 1 language non-unicode both... so I thought I should create a new account for my laptop. I tried to create a new user for English & Arabic account and keep the default English & Spanish profile, but it does not work. It changes everything, but everything I have on a profile automatically changing the same thing on the other profile. It's very frustrating because I always have to restart my laptop. Is it possible to have multiple accounts with a different default language for each of them?

  Hello princeleo,

  In addition to super486 comment, I've included a link below that will help you during the implementation of different languages for different users.  Please let us know status.

  Configure Windows XP for multiple languages:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/setup/set-up-multiple-languages-Windows-XP

  With Windows XP, you can configure several languages and then switch between them with just two mouse clicks. If your computer is used in a multilingual household, you can configure each user account with a different language.

  Thank you

• Language of the Win7 professional to support the non-Unicode programs?

  Hi all

  Do you know if the Windows 7 language support for non-Unicode programs? I mean, if you use a Japanese or Chinese under English environment in Windows 7, the text appears correctly?

  Thank you
  Roseattle

  Hello Roseattle,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is a problem installing Windows 7 positions and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Replacement Non Unicode glyphs?

  Hello

  I inserted a few glyphs before assigning their Unicode values in my policy, now that I've given all these glyphs their correct Unicode files, however, when trying to replace those that have been inserted before the change, the ' ^ + "mark indicates in the dialog instead of the glyph itself and InDesign still consider them Non-Unicode when inserted.

  What should do? (ID v9.1ME)

  Thank you.

  

  I don't know what ' ^ + ' means, but I can see it if I copy a character that has no Unicode ID text value in the find/replace text tab.  If I copy tab GREP-I get the corresponding ' ~ + ', which I cannot find in the wonderful Peter Kahrel GREP in InDesign.  However, at least as far IDCS4 ID offered find/replace glyphs, which works differently.  If a select a character that I know has only a GlyphID and Unicode value (say, 11615 Kozuka Gothic Pro), which is highlighted in the glyphs Panel.  Hover it shows 4 dashes, confirming the absence of a Unicode value. right click offers of "load glyph in find" (or change, in fact) and evokes the glyph tab in find/replace.

  Or you can choose the glyph in find/replace tab, fill the family and style to your policy, and then change the ID: field to display the GID/CID.  You may be able to get the ID no. you need an older version of the police.  Or if you left the old glyph not coded in the installed version of the police, you can click on the triangle pointing to the right after "glyph:" and scroll down to find it.

  Good luck!

  David

• Unicode or non-unicode

  Hello

  any request or the way to know whether or not an installation of the peoplesoft system is Unicode unicode?

  Thank you.

  You can query PSSTATUS

  Select ownerid, decode (UNICODE_ENABLED, 1, "Unicode", "Non - Unicode") PSSTATUS UNICODE_ENABLED;

• Language for non-unicode programs.

  I write the text of my Greek characters in the application.

  The Greek characters are displayed correctly if open with notepad text in any pc.

  I have problem with 2 PCs, where the Greek characters are replaced with question marks.

  All PCs these 2 with the problem have win xp sp3 and the language for programs no unicode set in Greek.

  Hello dimitrisalexandratos,

  Since you are in a domain environment, you should post your question in the forum TechNet this forum is primarily for consumers of personal information.
  I have included the link here for you.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Thank you

  Marilyn

• SQL Server 2005 Management Studio Query Export to CSV to the Non Unicode Format

  In SQL Server 2005 Management Studio, click the part of the results of a query.  Click on "save results under...". ", select CSV and an output file.

  The output is in unicode format. How can I fix this in ASCII?

  Jim Oliver

  Hi Jim,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/category/sqlserver/

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error using ESSCMDQ with Essbase ASO unicode applications...

  Hi all

  I tried to restructure an ASO for a unicode application outline... and I get this error:

  [Tue Mar 17 17:49:25 2015] EssbaseServerName/App_Name/DB_Name/admin/Error (1060127)

  Contour encoded UTF-8 file is not allowed to read in a non-Unicode client mode

  so try to use the command

  Openotl '2' 1 'App_Name' 'DB_Name' 'DB_Name' 'y' 'y' 1;

  I tried to put the command in a signed file UTF8, but still have the question.

  Is it possible to use this utility (ESSCMDQ) on request for ASO to restructure the sketch?

  Is there another way to make outlines of a request for ASO restructuring?

  Essbase version is 11.1.2.1.

  Thank you

  Alex

  Try "when running ESSCMDQ against a Unicode ASO plan, the following error and cannot continue:"file encoded in UTF - 8 pattern is not allowed to read non-Unicode-mode client"(Doc ID 1502120.1).

  Solution

  1. an environment variable must be set:

  In the environment where ESSCMDQ runs, the value of the environment variable "ESSCMDQ_UTF8MODE" and make sure it is equal to 1:

  ESSCMDQ_UTF8MODE = 1

  2. Once you have verified that it is located in the environment for the user/cmd line used to run ESSCMDQ, run ESSCMDQ again. It should now be able to compact this sketch ASO Unicode.

  See you soon

  John

• problem with not setting is not unicode mode in the Essbase database schema

  I get this error
  
  Rule reading information SQL for the database [DP]
  Rule of reading of the purpose of the database rule [DP]
  Active parallel loading: [1] block to prepare the discussions, block [1] write discussions.
  Loading data encoded in Unicode application in mode non-Unicode is not supported
  Unexpected error Essbase 1003048
  
  
  I also I migrated my applications in unicode mode after installation
  
  I have a system using SQL
  
  and
  
  With a 11rG2 Oracle
  
  Please advise
  
  Published by: level according to December 10, 2011 19:07

  So I take it worked?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• Generate and write unicode characters to file

  The characters of genearted seems OK (up to x00FF), but after writing to file these characters and their values are different. Also the characters after 0x00FF are not good.

  Any idea?

  

  You should probably give this page than to read a thorough if you relied on the use of Unicode in your application.  Here is a relevant excerpt:

  ASCII technically only sets a value of 7 bit and can therefore represent 128 different characters, including characters such as the newline (0x0A) and return (0x0D) transport. However ASCII characters in most applications including LabVIEW are stored as 8-bit values which can represent 256 different characters. The 128 additional characters in the ASCII range are defined by the code page of the operating system aka "language for programs non - Unicode.  For example, on a Western system, Windows uses by default the character set defined by the Windows code page 1252 Windows-1252 is an extension of another commonly known used encoding ISO-8859-1.

  Offers Windows-1252 characters up to 0xFF (ÿ) but not something higher to 8-bit (for example no 0x0100).  By default, LabVIEW support these uses of 8-bit, multibyte strings characters - only interpretation is based on the current code page selected in the operating system.  You can turn on Unicode, the instructions in my first link (this is not supported and can be a little buggy from time to time...) to get the support of multibyte unicode characters to multibyte codepage characters not in the operating system.

  Unicode has several encodings, and the bit raw to a character depending on the encoding used.  LabVIEW limited unicode support seems to use UTF-16 (little endian) encoding for whatever it will be displayed in the user interface.  So to get the characters displayed on the interface user, you must enable unicode (instructions illustrated in my first link) and write the appropriate UTF-16 code:

  

  UTF - 8 is more common and therefore easier to work with outside LabVIEW (e.g. my version of Notepad ++ obviously do not support UTF-16).  I usually find myself using UTF-8 for files format strings and convert them to UTF-16 for display in LabVIEW.

  

  Unicode in my first link library has the necessary subVIs to convert between UTF-8 and 'Unicode' (i.e. UTF-16).

  Best regards

• Change language Unicode on XP

  I need to run an application that requires me to change my Windows XP language for programs no unicode for English (Singapore). However I don't know English (Singapore) in the Windows XP language for non-unicode programs option setting. How can I solve this problem?

  Hello

  English (Singapore) is not supported in Windows XP. It is available in both Vista and Windows 7. Consult the document below.

  http://msdn.Microsoft.com/en-us/library/dd373765 (vs.85) .aspx

  I suggest that you try Windows 7, where you can easily download the language packs through Windows updates. Please take a look at the links below.

  http://Windows.Microsoft.com/Windows-7

  Language packs

  http://Windows.Microsoft.com/en-us/Windows7/products/features/language-packs

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Illustrator problem - number Unicode (Web Premium CS4; 10 64-bit Windows)

  I would be grateful for any answer you're my last hope...

  A few years ago, I bought Adobe Web Premium CS4. Earlier this year, I bought a new laptop with Windows 10 64-bit onboard. I installed CS4 - it took place without a hitch. Unfortunately, a few days ago, I had to have my reinstalled system. After the relocation and the update of my laptop, I tried again to install the Adobe software. This time, everything went well outside the Illustrator who can't run. My problem looks like the one described here: Adobe Illustrator Spanish version crashes or won't start or launch | Windows 8.1 -the difference is the language of my system is Polish. Whenever I try to launch the program, the system inform me that Illustrator is not compatible with my operating system and I should change the settings for programs that don't support Unicode. Of course, I tried to do this, but without success...

  I contacted Adobe experts, but they do not know the solution and they sent me here. Is it possible to solve my problem? If this isn't the case - download the English version of Illustrator? Although it is part of Web Premium, a consultant from Adobe suggested it would not work as I have for the Web Premium serial number not for Illustrator itself.

  Help, please! I seriously need Illustrator and cannot afford new version.

  Thanks again, Ned Murphy. The problem is that I bought a new laptop, because the former was far too slooooow for work with the most demanding programs (such as I, for example). Yet, I really appreciate your efforts to console me.

  Fortunately, I managed to find a solution. It's pretty simple - all I had to do was to change the settings for programs that do not support Unicode in the language of my operating system (in my case - Polish [sic!]). For all of you who are having the same problem - you can find this option in the control panel > regional and Language Options (in Windows 10 regions only) as described here: How to change the language for non-unicode programs settings in Win10?

  That's all. Everything works fine again - I can't believe :)

• No region of unicode windows

  Hello

  I install the new CC photoshop and without problems and I work now, but when I download illustrator CC appers a window with the following text. Change the region to a non-unicode language

  I changed to another region, but the window appearing still (I know not what is in the region of the CC of photoshop)

  Thank you very much

  Change your system for English. It is a known problem with current systems of Spanish on Windows 8 / Windows 8.1.

  Mylenium