None of the DIO Modules of series C are configurable as inputs of counters?

Similar Questions

• How is there is some noise in the library module, while there is none in the develop module?

  Straight, simple like this:

  I shoot with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

  I airbrushed a picture and I pushed some limitations while using the tool brush on some sections of the image.

  As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo.

  How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

  What to trust? How can we work with divergence like that?

  If anyone noticed something similar, I would really like your opinion on this.

  > I'm shooting with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

  You have been deceived by the marketing. All cameras, even a 5DmkII a noise at each ISO setting. Most of the noise from digital in modern cameras capture is caused by photon counting statistics (i.e. photographed fish noise or noise) and in small part by the noise of the amplifier. This means that any pixel noise is practically equal to the square root of the number of photons counted by the pixel. "Canna change the laws of physics Cap ' n."

  > I've airbrushed image and I pushed some limitations while using the tool brush on some sections of the image. As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo. How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

  Development module working on a small subset of the raw data for its display, especially when zoomed out to go up or fill. This is to ensure that cursors are sensitive and you don't have to wait for a few seconds each time you touch a slider. You can only trust the preview to establish in what respect the sharpness and noise when zoomed to 1:1 or higher because of this and this means you must be able to optimize the sharpness and noise while the zoom 1:1 reduction. This is necessary in all cases that capture sharpening and noise reduction work at the pixel level. In the library, the preview is a JPEG, pronounced on the raw file using full raw. Also note that if you brush positive clarity, one tends to amplify really no noise in the image, so, be careful and check regularly at 1:1.

  > What to trust? How can we work with divergence like that?

  1:1 Preview to the point or the glimpse of the library if you are interested in the features of sharpness and noise.

  > If anyone noticed something similar, I would really like your opinion on this.

  You are not the first to see it for sure. Usually, it doesn't matter except when you push your images really hard.

• On XP and FF 5.0.1, but NONE of the graphics on a Web site are visible. Even the ICONS are blank. Help, please!

  This has occurred since the new version of Yahoo mail is acting funny in IE8. It works fine in Mozilla, with the exception of the graphics issue. And if I go to all the other sites (not just yahoo), they all have similar problems.

  Is he missing pictures then make sure you are not block images from certain domains.
  See:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load
  • Check the permissions for the domain in the active tab in tools > Page Info > permissions
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in tools > Options > content: Load Images > Exceptions
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• None of the documents that I saved/created are deleted when I restore to a system restore point?

  I currently have problems with my Toshiba A305 S6905. This is the webcam does not work. I tried everything, including the installation/uninstallation of drivers, it was working a week ago. So I decided to go back to a system restore point, just to see if I installed something wrong.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files on your computer.

   

  Note

  System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

• Strange problem with the module memory series Satellite Pro 4300

  I have a laptop Toshiba satellite pro 4300 series with 64 MB onboard + 64 MB Module and I want to upgrade my memory to 320 MB. I bought two ram of 128 MB each. I removed the 64 MB module and I put a 128 MB module into the slot (A) one, but I saw that the total memory is 128 MB again.

  I removed the module again and I put the second module in the connector (A), but I saw that the total memory is 128 MB again. After that, I put the two modules in my notebook (Slot A and slot B) but I see that the total memory is 192 MB. This means that it recognizes each module as 64 MB as opposed to 128 MB. Dose anyone know why this happens?
  And what do I do about it?

  Thank you.
  [email protected]

  Hello

  Well, I put t know why this happens. It seems that the 128 MB modules are 64 MB modules. I know that it of strange but I have only this explanation. You are 100% sure that both modules of memory 128 MB?
  In my opinion, you should check the bars of memory if they have 128 MB.

  Good bye

• Cisco Nexus 1000V Virtual Switch Module investment series in the Cisco Unified Computing System

  Hi all
  I read an article by Cisco entitled "Best practices in Deploying Cisco Nexus 1000V Switches Cisco UCS B and C Series series Cisco UCS Manager servers" http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9902/white_paper_c11-558242.html

  A lot of excellent information, but the section that intrigues me, has to do with the implementation of module of the VSM in the UCS. The article lists 4 options in order of preference, but does not provide details or the reasons underlying the recommendations. The options are the following:

  ============================================================================================================================================================
  Option 1: VSM external to the Cisco Unified Computing System on the Cisco Nexus 1010

  In this scenario, the virtual environment management operations is accomplished in a method identical to existing environments not virtualized. With multiple instances on the Nexus 1010 VSM, multiple vCenter data centers can be supported.
  ============================================================================================================================================================

  Option 2: VSM outside the Cisco Unified Computing System on the Cisco Nexus 1000V series MEC

  This model allows to centralize the management of virtual infrastructure, and proved to be very stable...
  ============================================================================================================================================================

  Option 3: VSM Outside the Cisco Unified Computing System on the VMware vSwitch

  This model allows to isolate managed devices, and it migrates to the model of the device of the unit of Services virtual Cisco Nexus 1010. A possible concern here is the management and the operational model of the network between the MSM and VEM devices links.
  ============================================================================================================================================================

  Option 4: VSM Inside the Cisco Unified Computing System on the VMware vSwitch

  This model was also stable in test deployments. A possible concern here is the management and the operational model of the network links between the MSM and VEM devices and switching infrastructure have doubles in your Cisco Unified Computing System.
  ============================================================================================================================================================

  As a beginner for both 100V Nexus and UCS, I hope someone can help me understand the configuration of these options and equally important to provide a more detailed explanation of each of the options and the resoning behind preferences (pro advantages and disadvantages).

  Thank you
  Pradeep

  No, they are different products. vASA will be a virtual version of our ASA device.

  ASA is a complete recommended firewall.

• I just bought photoshop elements13 at best buy I can't find ser # none of the numbers on the box or for adults work

  I just bought the photo elements store 13 and found ser # none of the numbers on the work of box or sleve register

  Please refer to find the serial number of your product Adobe quickly

  Hope this will help you.

  Kind regards

  Hervé Khare

• Lightroom CC - development of non-visible presets on the context menu in the library Module

  Just installed Lightroom CC 2015 - loving the speed increase in the develop module.

  When I select a bunch of images in the library module and right-click (Windows of course), 'developing' settings from the context menu has a number of things listed, but missing completely all presets that are usually visible.  This was voluntarily removed in Lightroom CC, or is this a bug?

  If I pass the develop module, all my presets appear on the left hand side correctly.

  In the library module, they are all listed in the box "Saved Preset" above to develop quickly, but they are just missing now from the context menu.

  I tried to reset all my prefs (ctrl + alt + shift on restart) - still the same.

  Any ideas?

  Paul

  Lightroom CC 2015 running on Windows 7 Professional SP1

  It is true, that they are eliminated because of the speed. Some users were too develop presets so he slowed down too.

• LR4 - book Module - none of the custom formats?  Automatic layout works only on odd pages?  Bug reports.  Thoughts.

  I'm a photographer wedding and Portrait Professional & thought it may be useful to others & Adobe to share some thoughts and questions.

  I just ordered LR4 yesterday 3/7, as soon as I saw he is out =) I'll have the software delivered to me, but in the meantime, I downloaded the trial version of the LR4 which I started to play with today.  BTW is identical to the full version trial version but active only for 30 days?  Or some of its limited features?

  I had a few questions about the book module.  Some of them I think that are bugs.

  • Is it possible to enter in custom formats?  I don't see that see there is an option for 5 sizes and impossible to find another option.
  • I tested the automatic layout function.  It automatically layout, but only on odd pages, even pages are left in white.  Could not find a way to settle this.  (Updated, I like the white page feature, it gives extra room for manoeuvre to change the page layouts and for me it's easier to delete a page that Add.)
  • When you add favorite layouts I can't add page spreads to my favorites.
  • When I press tab to get rid of the side windows, I can't scroll further down in the book.
  • The navigation on the left and right arrow buttons do not directly work in the main screen.

  First impressions:

  (after only playing with him for an hour)
  

  It would be nice to have more control over preferences in the book such as the particular custom formats Module.  As it is, it feels unusually restrictive.  That said I am very excited by the possibilities that this may cause.  From now on I'd still certainly the final layout in PS, but I hope I do the initial design approximate layout using this new book module.  Looks like it could save a lot of time and be much easier to do this step in PS.

  Data sheet:

  Windows Vista 64

  Trial version of Lightroom 4

  Any answers would be more useful!  Thank you!

  Grace Lightner

  Grace Lightner photography

  http://www.gracelightnerphotography.com/blog

  I had a few questions about the book module.  Some of them I think that are bugs.

  • Is it possible to enter in custom formats?  I don't see that see there is an option for 5 sizes and impossible to find another option.
  • I tested the automatic layout function.  It automatically layout, but only on odd pages, even pages are left in white.  Could not find a way to settle this.
  • When you add favorite layouts I can't add page spreads to my favorites.
  • When I press tab to get rid of the side windows, I can't scroll further down in the book.
  • The arrow on the left & right navigation buttons do not directly work in the main screen.

  Let me first, I'm not an expert on ledger. Yes, I used it for a while, but many components of the module are much too dark for my taste. In fact, you have identified certain aspects that left me scratching my head for the months, not hours or days.

  1. Custom formats is not directly supported at the present time, but I understand that users will be able to create their own page/models using Adobe Illustrator. I can't say when this facility will be available well.
  2. To change a page layout (left/right pages, etc.), you need open the Preset automatic page layout editor. To do this, choose the form Edit Auto Preset layout from the menu editor drop-down preset (directly under the header Panel automatic layout)
  3. Have noticed this myslef, I don't remember if it is a bug or a design limit.
  4. Not seeing this problem, it works very well on Mac OS X. try clicking on the scroll bar to make it active, it may help.
  5. Yet once again, not seeing this problem, the left and right buttons in the main window of content move from one page to another.

  It is also interesting to note, in case you have not discovered yet, preferences located under the menu book book. This is where you define what metadata are used to auto fill in the areas of text (for example, title or legend).

  I expect that one or more of the other pre release testers who spent more time than me in this module will probably be able to fill the gaps.

  Edit: I forgot to include the screenshot of the Prset automatic page layout editor

  

• Image not appearing is not in the develop Module

  I've seen a number of discussions on this, but unfortunately the proposed solutions do not work.

  When I access the image in the develop module it will show initially, but a setting I'll do the image not displayed (they do in the browser preview in the upper left corner), generally the image then disappears. After that, when I select the image it leaves a white screen where the image should display.

  When the question first, I checked and the GPU acceleration could not be turned on due to an error. I went and updated my driver, but unfortunately I have an AMD Radeon 7670 graphics card and I discovered the hard way Lightroom CC is not compatible with this graphics card and the latest driver so when I accessed to develop module lightroom instantly if is crushed, regardless of whether or not the graphics acceleration was lit.

  • AMD Radeon HD 5xxx series 8xxx graphics card run versions 14.501.1003 & 14.502.1014 driver

  I was able to go back to the older version of the driver, 13.152.0.0, Lightroom will run without crashing, but still have the original problem, I can't use the develop module.

  Any suggestions? At this point, I'm tempted to restore the previous version of Lightroom, but I'm hoping to avoid that, as I have ingested, the tag and assessed to nearly 2500 pictures and would really prefer to keep this work.

  Version of Lightroom: CC 2015.1 [1025654]

  License: Creative Cloud

  Operating system: Windows 8.1 home edition Premium

  Version: 6.3 [9600]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.3 GHz

  Built-in memory: 16322,1 MB

  Real memory for Lightroom: 16322,1 MB

  Real memory used by Lightroom: 948,9 MB (5,8%)

  Virtual memory used by Lightroom: 928,0 MB

  Memory cache size: 59.2 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 2560 x 1440

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: Yes, keyboard: No.

  Graphic processor News:

  Check the supported OpenGL: failed

  Vendor: ATI Technologies Inc.

  Version: 3.3.12422 context 13.152.0.0 the base profile

  Renderer: AMD Radeon HD 7670

  LanguageVersion: 4.30

  GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS (real = 32, minimum = 48)

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: K:\FILES_0001\lightroom_catalogs\lightroom_catalogs_0002_150709\lrcat_all_0003_130613_lr5 \lrcat_all_0003_130613_lr5-2.lrcat

  Settings folder: C:\Users\Sean\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) HDR Efex Pro 2

  (6) jf PicasaWeb

  (7) attachment Plugin Leica

  (8) export of LRT

  (9) attachment Plugin Nikon

  (10) perfect B & & W 9

  (11) perfect effects 9

  (12) strengthening the perfect 9

  (13) perfect photo Suite 9

  (14) perfect Portrait 9

  (15) resize perfect 9

  (16) PhotoShelter

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 675b

  Subsystem: 6888103c

  Revision: 0

  Video memory: 1003

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Out of DP AMD (AMD High Definition Audio Device)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  Looks like a problem of ICC profile.

  try to set your monitor to sRGB, or re - launch your calibration software (IE; XRite Colormunki)

• Reinstalled Firefox and none of the Add-ons work

  Hello, I had problems with Firefox so I completely uninstalled and reinstalled. Everything seemed fine, but after I reinstalled the Add - ons that Adblocker Plus, WOT, elegant, etc., none of them worked at all. I checked the section modules and they are signing up as activated, but apparently none of them has entered into force - even after you restart the computer and Firefox.

  Any help is very appreciated.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.

  If this did not help, then also delete the files addons.json and addons.sqlite.

  You can check for problems with preferences.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• Satellite Pro L300D: Cannot install because of the common Modules control utility

  Hi guys,.

  I'm new to this forum, but I spent two days looking around.
  I have a sat Pro L300D that I'm downgrading to XP, because many are, and I can't get the touchpad to work or function buttons.

  One problem seems to be to install the utility 'controls', which gives the message "common modules" not installed even though it was the first pilot, I have installed.

  Does anyone have any suggestions?

  OK, here we go.
  Toshiba pilot European page doesn't provide drivers XP ALL, tools or utilities for the Satellite Pro L300D.
  Is this good? I checked the page and there are no. XP applications.

  So I came to the conclusion that the common Modules cannot be installed because this software was not designed for this series of portable and therefore, you receive this error message.
  It is clear!

  So Don t wonder what impossible to install "utility controls" or common modules. These pieces of software are not compatible

• Export to the DIO PWM signal

  Hi guys!

  I'm working on a project where I want to control a motor dc with VirtualBench and LabView.

  I have the engine connected to a H-Bridge motor, so I need to send 3 digital signals from the DIO VirtualBench to H-bridge.

  With respect to management, I figured out, but now I need help to get a PWM signal to one of the DIO pins.

  I can generate a PWM of the FGEN but do not know how to export to a DIO PIN.

  I can also generate a PWM with the Express-> entry-> function Generate signal in Labview. But I get an error when you try to write this signal to pin.

  Or is there a way smarter or easier?

  Help, please!

  / Christian

  The digital i/o pins are supported as the SPI, I2C, static DIO (timed by the software) and exports of MSO Trigger or FGEN signals start. There isn't any feature PWM/meter.

  It is not a way to generate a PWM signal real on the DIO pins, nor can you give a digital waveform to dig write. From the FGEN might be your best option here.

  Another possibility might be to use (ab) the functionality of mastering of SPI. The following VI generates a modulated signal of pulse on dig/1 (MOSI) width. It will also generate signals on dig/0 (CLK) and dig/3 (CS), which may not be desirable, and you will have "gaps" between each call to read write of SPI.

  

• HP Deskjet 4615: After uninstalling the software HP4615 I get a "could not start HPStatusBL, the dll module.

  After uninstalling HP4615 and then by installing the HP4645 software, I get the following message when starting "there was a problem starting C:\program HP HP deskjet 4610 series\bin\HPStatusBL.dll. The specific module could not be found. "How can I get rid of this message?

  Thanks for the support. To see that 'Monitor alerts ink' was a job. Without success. It does not appear in the startup routine. The quickest way was to download free software called «For Windows startup Inspector» This program finds the hidden routine so that not even a PI he would get. It took less than a minute to clarify "ink monitor alerts" from the beginning. Play well!

• Microsoft technical support can't help you with the faulty Modules Installer.

  I have pleasures with support by e-mail dated December 18 and the subject of some updates that caused the Windows Modules Installer to stop working.  Here are the steps that have been taken so far:

  1. reboot the failet installation service.

  2 direct download of Trustinstaller.exe and Trustinstaller.reg.

  3. transfer of support tech System Info of MSINFO32.

  4 Indentifcation updates specific causing the crash of the installer of Modules and make a direct download of them.

  5 reset Internet Explorer options and disabling third-party browser extensions.

  6 direct download of the tool.

  7 supply tech with screenshots of SFC.exe and CheckSUR.log.

  8 run the SFC/scannow command to request of the tech.  Error message received after scan 25% over that he can't finish.

  9. made by tech to perform an in Place Upgrade of my installation disks.  Update could not happen due to Windows PowerShell.

  10. made by tech to remove Windows PowerShell via "Turn Windows features on or off."  Error message that PowerShell cannot be disabled.

  11. realized by tech to modify the registry to disable the PowerShell.  In Place Upgrade always reports installed PowerShell and would not continue.

  12. looked for Windows PowerShell among the "installed updates".  There is no update labeled "Windows PowerShell" listed.

  So that is where I am now.  Windows Update did not work except for the occasional definition for Microsoft Security Essentials update since mid-December.  No security updates or patches cannot install properly by the installer of Modules of Windows crash.  I can't repair my installation of Windows because I can't uninstall Windows PowerShell.  If someone is able to help, please keep in mind that I read all the posts about how to uninstall Windows PowerShell through the registry and installed updates; None of them have worked for me; so please don't cut and paste these instructions again.

  Thanks to anyone who can help me.

  System information: Windows Vista 64-bit, SP2 top Home.

  And you were right: a trial version of Norton is installed.  I'm going to grap the Norton removal tool now.

  You should have uninstalled Norton free trialware, and then run the removal tool, BEFORE the installation of updates...

  Friday, January 21, 2011 18:59 [UTC], Robear Dyer wrote:

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application...

  That being said, you have to get SP1 is installed, and then a few prerequisite updates (e.g., KB955430;) KB947821) before Windows Update will offer SP2. See...

  Windows Vista service packs are not available for installation via Windows Update
  [was: Windows Vista Service Pack 1 (maybe not) available for installation from Windows Update and is not offered by automatic updates]
  http://support.Microsoft.com/kb/948343