a note on keyboard does not... only in logic

Similar Questions

• My keyboard does not work on firefox (only in firefox), can anyone help?

  As in the subject. Everything was going well for a few months now, I wanted to use the browser and the keyboard does not work. I use Notepad, copy and paste... Help, please

  Hi, thanks for the response. I have a keyboard and shortcuts will turn off. I'm not 100% sure, but I think I did run by pressing Windows key + LeftShift. I did a few tests now and there is something to deal with the Windows key + Fn (dell laptop). After pressing that firefox combinations see keyboard. WinKey + LeftShift operate again. Thanks anyway!

• El Capitan keyboard does not not after reboot

  I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

  After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

  I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

  Try again in Safe Mode.

  Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

• Keyboard does not not on Tecra 8100

  Hello

  My daughter has a Tecra 8100. Not sure if it is virused, but the keyboard does not work. Powers up fine, although slow, is usual (Spybot, CA anti-virus) virus scans - can't find anything, but still no keyboard. Ran a keyboard diagnostic and it says it works very well. Any ideas? (PS ideas where to get a recovery for the 8100 disk, can't find mine anywhere?) Thank you.

  PPS: Since then found that when I start in safe mode, I can use the keyboard? But why only in safe mode?

  Hello

  I think there must be a corrupt keyboard driver file or the keyboard has been disabled in the HWsetup Toshiab.
  Check the HWsetup and activate the keyboard in the opposite case, a new facility would solve that problem.

  But before you try to install the OS you can try to use the System Restore tool for Win XP.

  PS: the Toshiba Recovery CD can be ordered from the Toshiba service provider in your country.

• Keyboard does not work under Vista on Satellite L300D

  Dear readers,

  I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

  Today, I started the book and noticed that I was not able to type my password for Windows.
  I thought, there must be a problem with the keyboard and restarted the laptop.
  I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

  I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
  Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
  So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

  So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

  But it's still there.

  Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

  I would be very happy for any advice or help

  Greetings from Berlin

  Thomas

  PS: I want to say sorry for my bad English... :-)

  Hey mate

  > It's about 5 months and until now I didn't have problems.

  I wonder why this keyboard problem happened after 5 months of use?  :|
  This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

  In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

  I think that your warranty is valid and therefore everything must be covered by the warranty!

  Good luck

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected

• Satellite A300 - keyboard does not work sometimes

  Hello

  the boot of my Toshiba Satellite A300 computer laptop keyboard doesn't work sometimes?

  After a reboot, everything is ok!

  Anyone know why the keyboard does not work sometimes?
  Greetings

  On this virtual path, it is not easy to give you a precise answer, especially if it happens sometimes and I think that you need professional help with this.

  There may be a connection between the keyboard and the motherboard problem.
  I fear, we can only speculate that the problem can be m.

• Satellite 200-170-keyboard does not work and the keyboard stops working

  My U200-170 2.5 years, I have the following problem:

  When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

  Thank you

  AJAN

  Sounds like keyboard problem.
  The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
  But one thing is really strange; the yellow exclamation mark in Device Manager

  Eventually it s only a problem of software in such a case, a system restore can be useful...

  Have you checked if the keyboard works in the BIOS?
  Do this!

  If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Keyboard does not not on Lenovo laptop.

  Hello. I have problems with a Lenovo laptop. I can't connect to Windows because the keyboard does not work normally. The 'H' button works as a return back, for example, and I don't see what I'm typing in the password bar, I don't know what keys are what. Only a few keys to produce characters and when entering keys other system sounds right. I had this problem yesterday and I fixed by holding button FN and F4 or F7, I think it was F7, but now the same combination does not work. If you could help me that would be great. See you soon.

  I've identified the problem.

  Lenovo machine think that is pressed the CTRL key for an unknown reason. I googled and it seems someone else has the same problem with their Lenovo machine and they have an external mouse Logitech installed, I have so it would be a huge coincedence so those not bound.

  Is there a way to use the features of the arrow by pressing CTRL? Y at - there combinations like CTRL, ALT and 8 = arrow down for example?

  If so I can at least start mode without failure.

  See you soon.

• my keyboard does not work it let me enter my password at the beginning, but it is please help

  my keyboard does not work only to enter my password at the beginning

  Hi Joannejojo,

  1. What is the brand and model of your keyboard?

  2. when the problem started?

  3. did you of recent changes on the system?

  Method 1:

  You can check if the keyboard works in another computer.

  You can try to run the material Fixit and see if it helps.

  Hardware devices do not work or are not detected in Windows

  For more information, you can alsorefer to the following article:

  Troubleshoot keyboard

  Method 2:

  Step 1:

  You can try to check if the keyboard works in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, then you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• keyboard does not pop up during a call.

  I recently updated my xperia z2 to lolipop 5.0.2
  And whenever I'm on the phone, talking to someone, somewhere, I need to write the instuction or things mentioned on the phone by writing it on my phone... But I'm not stay can open my keyboard on a phone... Not only on my notes app... Even my apps and sms messaging too... Its annoying when I don't have pencils and while I trust my phone to keep the note d... Help, please

  If the above does not help, you have app smart key?

• Microsoft Wireless Multimedia Keyboard does not completely work in Vista

  I have the MS Wireless Multimedia Keyboard 1.1 installed on my PC.

  I recently had a few separate issues with my computer and technology at Geek Squad did some work cleaning on my PC for best performance and to get rid of a bad program.  I am running Vista SP2.

  On my keyboard, there are a series of buttons on the top which opens to different folders, or programs.  I had to open Excel and open Word.  The others are default Media Player, email, IE 8, My Documents and my pictures.  Everything worked correctly and opened the program folder / to, before cleaning.  Now mail, IE 8, and Media Player buttons still work, but others did not.  However if I open the Microsoft Keyboard program buttons become functional and remain so until I restart the computer. The keyboard works fine otherwise.  Y at - it a boot option which can have been withdrawn inadvertently during the cleaning process, which is the cause and if so how can I have reconstitute?

  Thanks for any help.

  Hi BCfromKY,

  To test the response of the keys on the keyboard, use the Microsoft keyboard Diagnostics (MS Key), a utility program that is included with the Microsoft IntelliType software. To use MS Key, follow these steps.

  Note the MS key utility is only supplied with the version of the Microsoft IntelliType 1.1 and later versions. If you do not have Microsoft IntelliType installed, you can visit the following Microsoft Web site to install this software:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK (http://www.microsoft.com/hardware/download/download.aspx?category=MK)

  Start Microsoft Keyboard Diagnostics. To do this, use one of the following methods:

  a. Click Start, click principally made programs, accessories and then click Run.

  (b) in the Open box, type mskey and then click OK.

  c. If you get no response in MS Key on your keyboard, test the keyboard on another computer. If the keyboard does not work on another computer, see the "Références" section for more information on how to contact Microsoft Supplemental parts to get a replacement.

  For more information, you can consult the following article:

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826/en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Keyboard does not work on Acer Aspire laptop running Windows 7

  keyboard on my laptop "Acer Aspire" (Window 7) does not work. In fact, only 5 or 6 keys work at first, but when I try to use the on-screen keyboard, the keyboard does not at all not even one key... I have try several solution, but none of them can help... So, I hope that the next solution can help me... - thanks-

  Hello

  (1) since when are you facing this problem?

  (2) remember to make changes?

  This seems to be a hardware issue, contact Acer to support more specialized on this issue.
  http://support.Acer.com/us/en/default.aspx

  The following steps are worth a try:

  You can check whether your keyboard works before starting Windows. To do this, you can try to enter in safe mode

  
  Start the computer in safe mode. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select Mode safe
  

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  I would like to know if your keyboard works in safe mode.

• Mouse & keyboard does not not after waking from sleep

  This problem started about 6 weeks ago, and I've exhausted all remedies except that maybe a Win update caused the problem with updates of November.  It only would be not the first time a Win update caused a problem.

  I am running Win 7 Professional 64 bit, 3.4 processor concert image, 16 gig RAM and 24 concert page file.  This occurs only when everyone is connected and puts the computer in "sleep mode" all connected, and that includes letting go the computer in mode 'sleep' a timed framework, or by using the command Win to sleep or Sleep.com.  It does not occur when you cold start, warm boot, or log off and then put the computer in standby mode, and that includes using the key on the keyboard, programmed to the Sleep.com or Win command.  In these cases, everything works fine even wake up the computer when it is disconnected.

  If I put the computer in mode 'sleep' while connected and then when I press a key or move the mouse, the computer will wake up and I get the login screen since I'm protected by Word.  The lights on the keyboard light (wired 4000 natural ergonomic keyboard) and the light on the background lights of the mouse (Wireless Mobile Mouse 4000) so I know the two USB ports are powered.  However, when you press any of the keyboard to type in my password, it does not display what I typed and the mouse cursor does not move. Both are totally insensitive.

  Short reboot, the only is to unplug the USB cable from the keyboard as well and the mouse receiver, wait 10 seconds, then reinsert them.  When I do that, everything works as it should.  It is a pain in the back since both are on the back of the computer.

  I tried using different USB ports, mouse & keyboard Centre of the reinstalled several times, checked all drivers, run ' sfc.exe/scannow"which doesn't show any problems with the system files and Device Manager has assured times checked to allow them to turn on the computer and made sure any setting relevant to the USB ports or peripheral interface that have the option to"Allow the computer to turn off this device to save power"are disabled.

  This is of course only related to someone to be connected, because it works very well when that I disconnect.  This tells me that's not the BIOS, as suggested by older discussions.  If it was the BIOS, then there is a problem when you do a cold or warm boot.  Also, I have the BIOS configured to recognize all USB devices when starting and not only ports keyboard or mouse.  The reason for this setting must be my hard drive to backup (USB 3.0) available at startup.  I checked everything I can think in the registry and can't find anything that could cause this.  I have hibernate off (never use it and it uses 10 GB of disk space for the file), and the implementation of the options for "USB selective suspend setting" is set to off.

  My solution is as follows: I disconnect, and then put the computer on "standby".  When ready again, I have simply to move the mouse, type my password, and Windows opens with the mouse and the keyboard works as it should.  It takes a little longer to wake the computer if it was put in mode 'sleep' when you are connected with the exception of the time and the hassle of having to unplug the mouse & keyboard, but I don't have to jump through that hoop to make it work.  Up to 6 weeks ago that this computer was fine with the same exact material because there now.  In the night, I just put it in "sleep" mode when connected from the computer has a task in Task Scheduler that wakes up the computer by running the insomnia (to keep him awake for backup) and backup programs runs, then shuts down the computer when finished.  This works because I do not use the keyboard or the mouse as I SLEEP.

  I would be grateful for any suggestions!  I'm a user for more than thirty years (even go back to the PMO for those of you who know what it was), built my own computers for years, so I can handle everything that needs to be changed.  It intrigued me, and I don't have very often coming up with computers.

  PROBLEM SOLVED!

  I thank very you much for working with me and remember to do things.  Sometimes techies like us, as they say, 'can't see the forest for the trees' If you know what I mean.  It's like the authors of the software manual do sometimes in that they assume you already know the steps has a B, and they begin to step C.  Sometimes it is more obvious that we see because we are looking for something more complicated.

  I had already tried another keyboard and a mouse, and I thought some time ago, I did a clean boot, because I know that can open the door and where is the problem.  If I did, I forgot or did not find the problem.

  I apologize for him accusing Microsoft of having caused the problem with an update, but I've had this happen before and thought that it had happened again.  It turns out that it was a software problem, but not here where I thought it was.

  After doing a clean boot and noting that the computer and the mouse worked after the return of the mode 'sleep' with a clean boot, I knew there must be something to load into memory and showing in the notification area.  The only things I had done in the six weeks was to add a quick Weather Channel.com Weather app and I had exchanged and received my new SkyCaddie.  It is a portable device that shows the yardage, etc. on the golf course.  The SkyCaddie uses a program called CaddieSync Express that allows the device to communicate with the web site to download updates of the course, the software updates, etc. scores.  The version of the program used on my old unit had a problem after I unplugged in that when you open Internet Explore nothing would show - no communication with the web.  I had to sign out and then sign back in and then fix it every time.  It seems that in this new version the problem has been resolved, but they have created a new.

  By default, the program loads into memory and the icon appears in the notification area.  When you connect the SkyCaddie using its USB cable, the program recognizes and prepares to synchronize.  The problem with this new version, is that even if you do not use the synchronization program, this is what prevents the keyboard and the mouse works correctly.  It must focus on a USB hub even if you do not use.  The solution was to go to the configuration of the system to prevent this program from loading at startup, it placing a shortcut on the desktop and then clicking this shortcut to load the program prior to attaching the SGX.  I then let him do his thing, and when it's over and I disconnect the SkyCaddie from the USB port, I close the CaddieSync Express icon. and then when I put the computer to sleep and then wake it up, the keyboard and mouse work fine.

  I knew that I had installed the new CaddieSync Express all the time, this problem started, but I never thought about it because he had never caused this problem before the cause of the problem.  Trust me, they will receive a call from me tomorrow so that I can tell them that the problem they cause.  Remember what I said in the first paragraph.  They would not yet be aware of the problem, and maybe after I speak with people of their software, they'll send an email informing the owners of this problem until they get it fixed.

  Now, since systems vary so much, including how are managed USB hubs, this can occur only in rare cases.  I came just to be one of these.

  Thanks again!  Perhaps some of these other people who have posted in the forum who had the question keyboard & mouse will read this thread and it will help them solve their problem.

• @ Key keyboard does not when you connect on PC

  When I try to connect to a Windows 7 PC with password home@2015 the keyboard does not recognize the @ key and I have to use shift2 instead.

  Once I'm connected to the PC the @ key works only fine no problem at all.  It is only when you connect what happens.

  I checked keyboard settings and they are correct and the same as any other PC that all work properly.

  I don't know what else to check if anyone can help please.

  All sorted now.  This is the registry which has been set at US UK No.  This was changed and notation in a work properly.