Not able to connect to essbase in standalone mode

Similar Questions

• Not able to connect IPS on a graphics mode

  Hello

  "I updated the version of the engine of IPS-4240-k9 of" 2.0000 E4 to "engine 7.0 Version (4) E4", after the improvement, I am able to connect through SSH (putty) but if I try to connect through graphical Mode it showing "Please wait while IDM is current sever configuration loading" after 100% ' " , it in error in loading

  "errSystemError-ct - sensorApp.454 does not, please check it out the processes in the system.

  Coonect to the specified IO::clientPipe failed. "

  This type of error, I restarted the IPS, but still, I am faced with the same error. Kindly help me solve this problem

  Regadrs,

  Saidou

  Hello

  Try the decommissioning of the sensor using the following procedure:

  http://www.Cisco.com/en/us/docs/security/IPS/6.0/Configuration/Guide/IDM/dmImage.html#wp1044573

  If she solves problems, try to install once more. If the problem persists, I would suggset to open a TAC case. This isn't a known issue as far as I KNOW.

  Concerning

  Farrukh

• Not able to connect to the essbase server: error 10061 NW

  Hi all

  I am currently working on Hyperion 11.1.2.3 and have installed Hyperion essbase and planning for the same thing. Until a few days back I was able to connect to my server essbase in environmental assessments, but now it gives me error that says: error: 1042006: Network error [10061]: unable to connect to [WIN - 1K6GBOF63C0:1423], where WIN-1K6GBOF63C0 is my machine name.

  Here is an excerpt of what I got from the newspapers essbase

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051283)

  Recovery of license information, please wait...

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051286)

  The license retrieved information.

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1051227)

  No JVM location specified in essbase.cfg. Will attempt to load the library path

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1311019)

  During the initialization of the JVM classpath: [; C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051223)

  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: getInstance: impossible to get the instance of CSSSystem, please visit SharedServices_Security_Client.log for more information]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051198)

  Single Sign-On initialization failed!

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1056815)

  Essbase 64-bit - version 11.1.2 (ESB11.1.2.3.000B4412)

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051232)

  Using English_UnitedStates.Latin1@Binary as the locale Essbase

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051683)

  Try to recover the login information from the registry failed. Please check the reg.properties file, and then try again.

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051527)

  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.

  I am able to open the workspace's shared services, but see the following in the Sharedservices_securityclient log

  [2015 07-12 T 00: 26:41.418 - 07:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A6jgDwW05zzWByW1LcXQY000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] failed to initialize the instance security EMP of Shared Services. Component marchandises9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is set to null in the EMP system registry. Check the configuration of the EMP system registry.

  [2015 07-12 T 00: 28:51.332 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:51.403 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20002] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.EPMSystem] [SRC_METHOD: getInstance] instance of security during the initialization of the SSP using the EMP system registry. It is a status messages. No action required.

  [2015 07-12 T 00: 28:52.340 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.184 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.606 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20005] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] started asynchronous user directory cache building user native Directory directory. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 12] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0:3] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 1. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20331] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] building Cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20332] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] unify done cache and the object is set to the cached cache manager. It is a status messages. No action required.

  Any help is appreciated here.

  Thank you

  Dev

  The error being generated using relates to Essbase is not able to connect to the registry of SSP database, or the database is corrupt.

  Are a set of services to automatic, maybe that the database has not increased and running prior to Essbase trying to boot against the register of Shared Services.

  Confirm the relational database is finally up and running and you can connect, then clear the Essbase logs, start Essbase, and post again the same newspapers.

  See you soon

  John

• Not able to connect to the workspace.

  Hello
  We use Essbase 9.3.1.2 and when I try to connect to the Hyperion workspace I get error * "you must provide a valid user name and password to log on to the system in the hyperion workspace."
  I am able to connect in essbase and shared services with success. I also checked the amount foreseen for the admin user and I have given all sufficient access to the BI title +. Can anyone of you let me know what needs to be done.
  
  I also tried to connect to https:// < Servername > / workspace/browse/configInfo
  Howerver, I get the same error.
  
  
  
  I also check the SharedServices_Security_Client.log under \Hyperion\logs\BIPlus\SharedServices_Security_Client.log. Find the info for the same thing.
  
  2010-08-16 23:23:19, 234 [Foundation Server] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML. <>(Unknown Source) init - ignore the validation of the configuration, because the required library parser validating not found or validation errors. This does not guarantee correct initialization of the component.
  2010-08-16 23:26:14, 715 [Thread-12] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency (unknown Source) - INFO: time to fix a circular dependency on the Cache for the supplier: INFRA11I is: 43
  2010-08-16 23:26:14, 883 [Thread-12] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache (unknown Source) - INFO: time to build the Cache for the supplier: DEV in millis is: 172220
  
  
  Kindly help me.
  
  Published by: user12209997 on August 17, 2010 06:48

  The configuration of your workspace are may not be incorrect. normally, these errors are fixed by re-deployment of the component of the slightest error by using the configuration utility - workspace in your case...
  Of course, if it's the production, you can open a SR with Oracle.

  See you soon
  RS

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  only title bar opens and nothing else... Please help

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Also check the cookie exceptions.

• 2000-2314TU HP: not able to connect to the LAN and Wireless network

  Hello

  I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

  You are the very welcome.

• Satellite L650-11R - not able to connect to public networks

  Hello.

  Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.

  I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.

  Any suggestions?

  It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.

  Try to compare the LAN settings with others who use the same operating system.

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• my ipod nano is not able to connect to itunes.

  my ipod nano is not able to connect to itunes.

  What version of Nano? What kind of computer? What operating system on the computer? What happens when you try to connect?

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• not able to connect to the game of google on mobile data store

  I bought gold x 2 lenovo 32 GB vibe.

  in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

  Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

  and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

  Please give the solution.

  
  

• Not able to connect to Wifi, USB ports, bluetooth

  Hello team

  I bought the new HP laptop today. I have installed Windows 7 OS. I am not able to connect to Wifi, not be able to use the blue tooth, not be connected to the USB. I downloaded the drivers from the website of the other computer. But how can I install it with one of them works. Please help us on the question mentioned.

  Product number: G8D85PA #ACJ

  Thank you

  Sunil

  Hi Sunil_motukuri,

  Thank you for visiting the Forums HP's Support and Welcome.I would be happy to help you. I read your thread on your computer laptop 15-g030au HP and who need wireless for Windows 7 drivers. Here is a link to the drivers.

  Hope this helps you.

  Thank you.

• I am not able to connect a remote desktop from my laptop computer.

  Remote Desktop connection problm

  I am not able to connect to a remote desktop from my laptop with Windows XP Professional service Pack 2, but at the sametime I can access the remote computer from other laptops. I tried manythings but it doesnot work.can someone help me? Thank you

  Hello

  Is there an error code or the message that displayed when you try to establish the remote desktop connection?
  Try it out below mentioned methods and check if this may help solve the problem.
  Method 1:
  Check out the link and follow the steps.
  
  Installation Windows XP Remote Desktop Web connection
  http://support.Microsoft.com/kb/284931
  Method 2:
  You can also visit the link below and try the methods in the article.
  How to use the Windows XP Professional Remote Desktop feature
  http://support.Microsoft.com/kb/315328

• Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

  Original title: Win32/Sirefef.DAtrojan

  Recently, I got the following virus. Win32/Sirefef.DAtrojan

  I was not able to connect to the internet since then.
  Y at - there someone who can help me with the connection to the internet?
  I have a Dell XPS600
  Microsoft XP Professional

  Hello

   
  1. what happens when you try to connect to the internet?
  2 - is confined to the browser Internet Explorer problem?
   
   
  I suggest you perform a full scan of the system.
  Here is a link that will give you know how
   
  Perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.