Not able to move files and new files in Bridge CS6

Similar Questions

• VIC SVmotion Plugin not able to move VMDK and leave the rest

  I use ESX 3.5 update 4 with the 1.0.0.0 SVmotion plugin.  I have a virtual machine that has 2 disc two currently on the store of data even zFCP.  I wan to move the second disk (D:\) in the first disc on the zFCP data store and a SATA data and survey the VM store.  I right-click the virtual machine, select storage to migrate, and I emphasize the second disc.  I can drag it to the SATA data store and click on apply.  After a few seconds, I get the error message:

  The requested Storage VMotion would move disks to a virtual machine without affecting the virtual machine, a new home page, but such an approach is not supported on the host source "hostname".

  If I try to move the VM together with the two discs, which works very well, but I only want the second disc.  Is it possible to move one disk of a virtual machine and do not have to move the entire virtual machine?  I thought that the SVmotion point should have the ability to move around VMDK.

  Thank you

  you will need to do this, use the remote CLI.

  First install the VI remote CLI, you can download it from the following locations.  http://www.vmware.com/download/vi/drivers_tools.html.

  Open a command prompt, and then navigate to the bin directory in C:\Program VMware VI remote CLI\.

  Then, run the following command to put the svmotion in interactive mode

  C:\Program Files (x 86) \VMware\VMware VI remote CLI\bin > svmotion.pl - interactive

  It will then ask you to enter your coordinates of VC and once you are connected to the VC, you need to enter the name of your datacenter (case sensitive)

  then it will ask you to enter the location of the vmx

  Enter the path of the data of the virtual machine (for example MyVM/MyVM.vmx store

  then it will ask you to enter the name of the destination database (in your case the SATA data store name)

  then you will be prompted by the following

  you will be prompted with the following message if you VM disks.

  You can also move the disks regardless of the virtual machine.  If you want to stay with the VM disks, then skip this step...

  You would individually place the disks (yes/no)?

  type Yes

  It will now ask you to enter the path of your vmdk, so you must enter the path for the two discs.

  MyVM/MyVM.vmdk

  fibredatastore

  hard MyVM/myvm (2)

  SATA data store

  Have a look here as well if you get stuck.

  http://itgerrish.blogspot.com/search/label/VMware

  Thank you

  Will be

• I am not allowed to move files in different folders. He tells me that I don't have permission. It started a few days ago.

  I create a project and save it to my standard file.  From there on, I move files in individual folders.  Recently, files are not allowed to be moved and my main files have a lock that appears on the icon.  I removed the shared lock, but still not able to move files.  I have windows 7.

  You can use it on personal folders,

  http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html

  Ownership of a file or a folder,

  Right click on the file/folder, select properties and then click the Security tab.

  Click Advanced, and then click the owner tab.

  Click on edit and then do one of the following:

  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  To change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

  See also why I can't delete a file or folder?

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

• Not able to synchronize files and libraries CC

  I am not able to synchronize files or libraries - it won't let me tic on the box. All solutions?

  

  I delete the database files CoreSync and it seems to have solved my problem.

  Leave the creative cloud desktop application.

  Reach:

  Mac:

  /Users//Library/Application Support/Adobe/CoreSyncSync

  Windows:

  C:\Users\\AppData\Roaming\CoreSync

  Remove all *.db possessing (or a Variant such as * .db - wal)

  Restart the desktop creative cloud application.

• Not able to read files audio wma

  I myself had this new cool device and everything is working fine beside it is not able to read files audio wma.
  It works without any problem on my Samsung android phone, but on my Slate7 it says format not supported in specifications indicates that it is supported.
  I installed the same player that I use on my Samsung android phone, any suggestions I should do to fix this?

  To my knowledge 4.1 Android doesn't have the necessary codec to play default WMA files. Please see the compatible audio formats listed by Android developers:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  However, for me MXPlayer/VLC works to play WMA files. You can try this one, and there is no harm to try. Two of them are available on PlayStore. You can uninstall them if you don't like them or if they do not meet your needs.

• Not able to write files to CD or DVD

  I'm not able to write files to CD or DVD. When I go to DVD - RAM (d :)) properties, I see only the following titles: general, AutoPlay, material and sharing.) I used to see a record position, but now he isn't. How do I restore to open and activate the recording function? I use Windows XP Home Edition with Service Pack 3. Drive: HL-DT-ST DVDRAM GMA - 4082N. Please advice. Thank you.

  Hi mark,

  · You receive an error message or error code when you try to burn a CD/DVD?

  · Do you remember recent changes made to your computer before the show?

  I suggest you to run the troubleshooter from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  You can also check the links below: CD - R or CD - RW drive is not recognized as a recordable device:http://support.microsoft.com/kb/316529

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:http://support.microsoft.com/kb/321641/

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WMP player not able to read files on fuse + after Real Network update

  In the evening, I received a noticed that there was actual update available. I installed it.  My fuse + was connected at the time. When it was done the options showed to read by the drive and the external card.  I tried to display to use it, but it seems to not work.  Windows Media Player also seems to not work.  I disconnected my player and plugged in.  Still not able to view files with WMP.  But, then was able to display using Real.  I don't like the actual display.  Was able to view files with explores.  Deleted in real.  Now able to see the player of fuse.  Only able to see 3 pictures on the external card.  I have 7 GB of data on a 8 GB card.

  Could be something else, but now seem to point to the actual update.

  I have a second player who still works with WMP.  I could see the files on the card with WMP when installed in my second player.  When I put it in my original drive is back to normal.

  Back to normal with no real software.  I liked Real SP.

  the real update may have changed the accociations with the "rocket" since it is try plugged in. uninstall the "rocket" in the Device Manager and then scaning for hardware changes. This should refreash installation.

• Not able to download files with the iPhone from the outside

  Hello

  I'm not able to download files from my iPhone when the iPhone connects to the workspace to external. We have deployed nginx as reverse proxy in our DMZ which transmits requests internally will bridge.

  The download start (number of bytes transferred to the top), then the transfer ends with "error".

  I could not find errors in the log files, but maybe I didn't look in the right places

  If the iPhone is connected to the internal workspace, the problem does not occur

  Any ideas on this subject?

  Thank you

  What is the waiting period that you define in the nginx Server in the DMZ? All other additional configurations?

• MSN - CRASH - TECH MSN TOLD - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL

  MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay fo

  I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay for this service after I did. How can I add a password to open my document?

  Hi cj47163119,

  You need Acrobat application to secure your document with password. It seems that you use Acrobat Reader.

  Acrobat Reader is a free service and do not have this option.

  If you have Acrobat subscription, you can download it here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  For more help, see this KB doc: Security with passwords, Adobe Acrobat PDF files

  Kind regards

  Meenakshi

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• First Pro CC will not import the .mov files

  Problems with first Pro CC, I can't import. MOV files created with my Canon 6 d.

  If I try to import the files, I get a msg of error "File not supported" very generic.

  It is a new installation of first CC on a new computer. I was able to import them using first Pro CC on the old computer.

  QuickTime will play well these files on my new computer.

  Premiere Pro CS6 will import these files to the new computer.

  First Pro CC would open them well on my old computer.

  I don't know yet where to start. Any help would be appreciated.

  Here are my system details:

  • 10.9.3 OSX
  • new Mac Pro
  • 3 GHz 8-Core Xeon E5
  • 64 GB OF RAM
  • The files are on the G external drive - Tech Thunderbolt.

  Well, I uninstalled and reinstalled first CC and all works well. No idea what went wrong, but its working now.

• Windows will not play. MOV files

  After downloading a. Video MOV, windows will not play it. A message appears that says required codec was not found. In the Media Player options, the box is checked download codecs. Why Windows media player does not download it. MOV codecs?

  After downloading a. Video MOV, windows will not play it. A message appears that says required codec was not found. In the Media Player options, the box is checked download codecs. Why Windows media player does not download it. MOV codecs?

  =========================================
  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  The 3ivx codec is supposed to enable WMP play
  Apple QuickTime .mov files...

  codec 3ivx
  http://www.free-codecs.com/download/3ivx.htm

  Also... the following freeware players can play QuickTime .mov files.

  Apple QuickTime
  http://www.Apple.com/QuickTime/Download/

  QuickTime Alternative
  http://www.codecpackguide.com/quicktimealt.htm

  VLC Media Player
  http://www.videolan.org/

   
  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MPC-HC.sourceforge.NET/

  If you want to install a pack of codecs... one of the following
  may be worth a try:

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  CCCP (combined Community Codec Pack)
  http://CCCP-project.NET/

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Not able to copy files on USB drives.

  Original title: hp v165w USB Device

  I bought 2 separate USB flash drives to copy files to each of them seemed installs successfully but then when I want to copy or drag a file to it, my computer tells me no device doesn't exist and please insert a disc into drive F. But USB installed in drive E, Ive tried to do a shortcut for on mmy desktop USB and drag files into it, but it gives a red circle with a line through it, indicating that it is impossible. Please help me understand what to do!

  Hi mrsstacysmith,

  Thanks for posting in the Microsoft Community Forum. As you are not able to transfer data in USB drives, try these methods and check:

  Method 1:

  To verify that USB is causing the problem, try connecting a single USB key and then try to transfer the files from the computer and check if it works.

  Once you get the confirmation, try to connect to the second USB and try to transfer the files from the computer and check.

  If the second USB shows the same error as mentioned try connecting to another USB port and check.

  Method 2:

  Check if USB drives are detected in the Device Manager.

  a. click Start, Type Device Manager in the search box start and click on enter.

  b. expand Bus USB controllers and check if the device is detected.

  c. double-click the device and check if the device status says device is working properly.

  Also check if the USB drive is detected in disk management.

  a. click on Start, Type diskmgmt.msc in the start search box and click on enter.

  b. check if the USB is detected as a drive.

  Visit this link for more information:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Not able to load files that have been uploaded to the site

  I was totally stumped by a problem, I'll have and think that the answer lies perhaps with Dreamweaver.
  
  Recently, I lost files on a hard drive crash which were important pages on my site. I want to update so I could upload them to the site for the work of thought. After download them on my local site, Dreamweaver refuses to open, giving me several error messages prior to the closing.
  
  The message I receive when you attempt to change my downloaded file:
  
  (1) corrupt JPG data: premature end of the data segment.
  
  When I close this error message, I get:
  
  The JPG file structure invalid 2): two markers;
  
  After the closure of this one, I get:
  
  (3) the instruction at "0x77f5b2ab" referenced memory at "0 x 00000028. The memory could not be "read". Click on OK to terminate the program.
  
  Front Page open the same files without problem, but I'd prefer to work with Dreamweaver and not FP.
  The files are .asp, incidentally.
  
  The indices or help will be appreciated.

  > When I loaded the page in DW8, it crashed.

  > .asp files, are also

  a browser in offline mode will not get the coding ASP.

  Connect to the server via FTP.

  If dw indicates that JPEG files are corrupt then crashes - then suggest
  Open them (the images) and save it back into an image editor.