Not able to run VM nested on Fusion 5

Similar Questions

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I'm not able to run a Windows Azure application

  I have a very strange problem.

  I'm not able to run an application in windows azure has a WCF service and mschart inside. Here are the steps to reproduce the error:

  (1) create a new windowsazureapplication with an empty asp.net webrole
  (2) now to add a new WCfService
  (3) run to make sure it works ok

  http://i.stack.imgur.com/1g6gW.PNG

  (4) now in one pages include mschart and open page design to ensure that the webconfig is changed to use the mschart.
  (5) now try to run the project.
  I get the error message like this one:
  Enter a description of the image here

  Is this a problem with blue windows or I do something wrong?
  FYI: This isn't my first project on windows azure.

  RuchitRami

  As far as I know Toshiba doesn't support this Microsoft stuff, so I think that Microsoft is the right address for these issues.

  Have you already checked that Microsoft saying about it?

• I'm not able to run windows update. [Error number: 0 x 80244019]

  I'm not able to run windows update. I get an error: [error number: 0 x 80244019] I took and I tried all the suggestions on the support for windows Xp article because that's what I'm running [error number: 0x8DDD0010] "When you click on a link, you see the error HTTP 500 - internal server, error 0x8ddd0010 error" but none of these solutions work.  I tried the ' Fix It program this car works but askes me to install Windows XP Service pack 3 or later and .NET Framework 2.0 or later version of windows update but as you can see I can't get windows update to work if it does not really help. "  Any ideas... Help, please!

  What XP SP level are you at?

  For your error: http://support.microsoft.com/kb/883820

  But that will not help you if you are not at the level of SP3.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Not able to run RealPlayer on the Windows XP machine, the file msvcp90.dll is missing

  Dear Sir / Madam,.

  Pls help advise the question of 'not able to run RealPlayer on Windows XP machine, file msvcp90.dll is missing'?

  Thank you!

  Hi EddieFang,

  Try to download and install real player http://www.real.com.au/.

  I hope this helps.

• not able to run micro security essentials says need to reinstall the client security micro

  not able to run the bases of microsoft security said that I need to install the microsoft security customer no idear was to conclude this

  Additional posts appear in the MSE Forum:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning/i-have-error-code-ox-80070715/578e0e44-99c9-4293-b75e-79e2ff1dc2b6

  http://answers.Microsoft.com/en-us/protect/Forum/protect_updating/not-able-to-uninstalll-micrisoft-security/f3bb8423-3671-453F-BB30-8b7f3e53daad

  Recommended as previously you could try to uninstall your MSE, then download and install a new copy of: File of Installation of MSE

  If it does not contact the MSE Support as previously suggested.

• MAF: Not able to run the sample project or a simple project with only one page

  Hi all

  I am trying to run examples of applications of the MAF delivered with Jdeveloper 12.1.3. I am not able to run these applications on the device in the emulator. They gets deployed successfully. However, when I try to open these applications, it hangs on the initial screen of the Oracle.

  I even tried to create a new MAF application with only a device with a page of the AMX. Tried to deploy, but still get the same result.

  No idea what could be the problem?

  Thank you

  Ajay

  Hello

  Problem has been resolved, after the re-installation of the Jdev and MAF extension.

  Understood that somehome, maf - application.xml couldn't refer to the features of the maf - feature.xml. When I created a new feature in the MAF - feature.xml, it was the adfmf - feature.xml and maf-application creation could refer to the functionality of this file.

  This seems to me an installation problem. I have therefore re-installed, now its works very well.

  Thank you

  AJ

• Not able to run oracle ADF application (.ear) in integrated Jdev wls

  Hello
  
  I'm not able to run a simple ADF application in Integrated WebLogic Server of JDev. This application (.ear) worked very well before in the same jdev (11.1.1.3.0).
  
  The error of fact face is
  "< 20 July 2012 12:47:54 IST > < WARNING > < hats > < BEA-149007 > < new location source, 'C:\Documents and Settings\Atul Singh\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\CallTracker', can be deployed to configured application, ' CallTracker [Version = V2.0]. The source of the application is 'C:\Documents and Settings\Atul Singh\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\upload\CallTracker\V2.0\app\CallTracker.ear'. Changing the location of the source is not allowed for a deployment earlier attempt. Try to deploy without specifying the source. >
  
  I checked the error in documents:
  
  BEA-149007
  ATTENTION: New location of the source, "newPath", can be deployed to configured application, 'name '. The source of the application is to 'configPath '. Changing the location of the source is not allowed for a deployment earlier attempt. Try to deploy without specifying the source.
  
  Description you cannot specify a new source for an application previously configured with another source.
  
  The cause of this error occurs when you try to change the location of the source for an application previously configured.
  
  Action deploy your application with the same source location that has been configured in the application.
  
  But I don't know where to change the location of 'source' or how to deploy "without specifying the source.
  
  Please notify.
  
  Best regards, Atul

  (a). after that you cancel the deployment by using the console, do not use the console to deploy it... just run your JDeveloper application
  (b) unless you tell us what real errors, there is not much more to say

• The host CPU is not able to run 64-bit virtual machines

  I am running VMWare Server Console on a Windows 2003 64 bit OS 1.0.3 and prepare to create a 64-bit VM server to test a new application on.  This forum server works on is a SuperMicro SuperServer 6025 B - TR +.  I entered the bios and activated the virtual bios in the CPU settings.  However, when I start my VM, I get the following error:

  «You have configured the virtual machine as an operationg system 64-bit client.»  However, this host processor is not able to run 64-bit virtual machines or this virtual machine has 64-bit support disabled.

  I looked online and saw some references to allow an EM64T which was to be activated but I do not see this option in my BIOS.  Someone at - it any other suggestions as to what I have to do to get the virtual machine to use the 64-bit compatibility.

  Unfortunately, the 1.x server logs are a little sparse in this regard.  However, it seems that you have mixed steppings of physical processors.  In this range of models, Intel changed the VMCS review between the Bx steppings and Gx steppings ID, making it incompatible for the execution of VT - x.  Realizing their mistake, Intel has provided to OEMS for a microcode patch that makes the revision ID the Gx stepping VMCS matches that of the Bx stepping.  OEMs distribute this patch of microcode as a BIOS update.

  In short, an update of the BIOS of your system provider should solve the problem.

• Mac Pro Dual Quad 3.0 GHz (8 cores - April 2007) not able to run 64 bit comments

  Help, I should be able to do.

  See this thread, because it is a similar issue that only my machine does not all 64-bit indicating my machine does not support hardware virtualization

  http://communities.VMware.com/thread/143298?start=0 & tstart = 0

  Here is what I get:

  * "VT operation is not supported by this VM configuration. " *

  You have configured the virtual machine to use an operating system 64-bit client.  However, this host is not able to run 64-bit virtual machines or virtual computer has 64-bit support disabled.

  + For more information, see http://vmware.com/info?id=152""+ "

  Running on the latest version, but this problem has always been there in previous versions (2.0.5)

  10.5.7 (failed in earlier versions either)

  8 GB ram

  2 TB of storage

  Tried the switch recommended on the config file but nothing.

  Thank you

  You have only one physical processor that implements revision VT VMCS a 7 and another that implements revision VMCS VT 11.  These processors are not compatible for execution of VT.  One processor is family 6 model 15 stepping 7 and the other family 6 model 15 stepping 11.  Intel has released a firmware fix that resolves this problem for the processors that differ only by deepening.  You should check to see if there is an update of the firmware from Apple that contains this fix firmware.

• Not able to run Express

  Hi all
  
  I changed the status of the assignment of an employee of + "Active Assignment" + for + 'suspended' + 15 days in January 2009 and for 15 days as "on vacation" + in February 2009. For these two statutes, the Payroll will not be processed as defined in working Structure > status.
  
  January and Febrauary the payroll is over and March starting in 2009, the State of the assignment is + "Active Assignment +.
  
  Now I want to release the payment to the employee by quickpay. But I'm not able to do it and get the error + "locking of transfer action +.
  
  How can I treat the wage of the employee because he has not been paid anything for the months of January and February, although he is eligible for a few days?
  When the assignment status is not to be treated, then why this employee is still in the regular payroll book?
  
  I'm on worm. 11.5.9
  
  Thanks in advance for any help.
  
  Concerning
  Rahman

  Statutes of Rato and assignment Pro is not to deal with are not happy together.

  Since Jan en Feb are already processed (meaning: have an action of assignment), but without result (not address), you cannot start again via Express.

  Payment can be a solution, but this will give you the same (no) results.

  The solution lies in the evolution of the status of the transfer in the treatment of one and implement proratio.

• I was not able to run Silverlight to watch Netflix since 30/11/2012

  Automatic running updated Firefox 17.0.1 on Windows 7. I used to be able to stream Netflix very well until late in the evening, 30/11/2012. I tried to stream a movie and Netflix has shown a window saying that it could not because of a problem with Silverlight, code 2103. Netflix suggested I remove and reload Silverlight. I did, twice. I've also updated Firefox yesterday, just in case. Yet, no joy. I can stream Netflix very well with Internet Explorer. What gives?

  Yes! I deleted all Cache and Cookies. Tested for 30 sec of two videos from Netflix. Everything works fine now. Thank you very much!

• Not able to run Microsoft Picture It 2000

  Microsoft Picture It 2000 had, but it does not work on PC with Windows XP. Solution?

  Allows to launch Picture It 2000 on PC at home. Got a new PC with Windows XP. Picture it will not work on it, because it can not find reference Internet 5. I do not use this online computer... but I didn't uninstall the newer of Internet Explorer and replace it with IE 5. I searched online a version of Picture It that are compatible on Windows XP, but after hours search... all I get is run around several other publishers of images... but nothing to download all versions of the image in it for Windows XP. I really like if we were working on Picture It format... so... NY solutions... ideas...?

  PI2000 should install with IE6 and IE7 may be but
  not IE8. Later versions of MS Picture It! /
  MS Digital Image must run under XP with IE8...

  I am running Win XP SP3 with IE8 and currently
  Ms Picture It! Publishing 2001 and MS Digital Image
  Suite 2006 installed and running.

  You can always download a 60 day trial of digital
  Image Suite 2006 (successor of Picture It!) (If you have
  PI .mix files from your old version... software .it peut
  Open, edit, and convert in the 2002 version. MIX
  has been changed. PNG which is a more universal format)

  Microsoft Digital Image Starter Edition 2006
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7C3B3DED-A15F-48C5-B724-7796FE8C151E&displaylang=en
  (Unlike the retail version... trial does not have the)
  ability to create VCD and it does not include the
  clip art and projects pre formatted)

  If you try this software and love... you may be able to
  find a copy online at a site like Amazon or Ebay.

  Example:

  Microsoft Digital Image Suite 2006 Anniversary Edition [old Version]
  http://www.Amazon.com/Microsoft-digital-image-anniversary-version/DP/B000GP1666/ref=sr_1_5?ie=UTF8&QID=1303680436&SR=8-5

• Not able to run Minecraft: error 126

  Minecraft error 126

  Hi all!

  My son can't get minecraft to work on the pc I built for him, comes up with the error 126:Loadlibrary did not specify the module is not found. The pc specs are amd Quad Core, radeon 5770 1 GB graphics card and windows 7 OS. Checked video card driver and it is the best and the most recent version. Can anyone help with a solution please.

  Hello

  ·         The game of trade Mine worked before?

  Method 1:

  If you install the game for the first time, then you can try to install the game in compatibility mode and check if that helps resolve the issue.

  See the link below to run a program in compatibility mode

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  Method 2:

  If the game worked before, then you can perform a clean boot, then try to check if you are able to open the game.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I'm not able to run java when I try to open a tab of education.

  Today, I tried to connect to a webinar and it wouldn't load up. Earlier I have was the TDAmeritrade, went to the education tab and it says it can't load the webinar as java would not run or load.

  I suggest you upgrade your browser to Firefox 7

  • getfirefox.com