I was not able to run Silverlight to watch Netflix since 30/11/2012
Automatic running updated Firefox 17.0.1 on Windows 7. I used to be able to stream Netflix very well until late in the evening, 30/11/2012. I tried to stream a movie and Netflix has shown a window saying that it could not because of a problem with Silverlight, code 2103. Netflix suggested I remove and reload Silverlight. I did, twice. I've also updated Firefox yesterday, just in case. Yet, no joy. I can stream Netflix very well with Internet Explorer. What gives?
Yes! I deleted all Cache and Cookies. Tested for 30 sec of two videos from Netflix. Everything works fine now. Thank you very much!
Tags: Firefox
Similar Questions
-
I bought a used under Windows XP SP2 desktop computer. I need to upgrade to SP3 to run MS Office Home and Student 2010. I was not able to be upgraded. Help!
If I where to install SP3 I would choose to download the
file and don't use automatic updates.Where to download the SP3 Setup file:
(The file is large but only installs the components required by your PC)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en
OR http://www.microsoft.com/en-us/download/details.aspx?id=24How to obtain the latest Windows XP (support CD or download) service pack
http://support.Microsoft.com/kb/322389Your computer must be at least level SP1 or SP2 SP3 will not be
install on XP Gold.I would also create a "save image" of my front disc
to install SP3 just in case you have problems.
Not having any Image backup software:
Try the 'True Image' (has a 15 day trial version available)
http://www.Acronis.com/homecomputing/products/TrueImage/If you use a third-party firewall brand, of course, it is up to date (latest version)
Install SP3 in mode "clean boot":
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Overview of Windows XP Service Pack 3
http://www.Microsoft.com/downloads/details.aspx?FamilyId=68c48dad-BC34-40be-8d85-6bb4f56f5110&displaylang=en
Don't forget to download and read the file titled "overview of Windows XP Service Pack 3"
Note: "you can run the package of SP3 update on any edition of Windows XP SP1 or SP2."The space of hard disk required for Windows XP Service Pack 3
Describes the space of hard drive required for installation
Windows XP Service Pack 3 (SP3)
"For a PC on which Windows XP is already installed"
http://support.Microsoft.com/kb/947311/en-usInstall Windows XP Service Pack 3 (SP3)
http://TechNet.Microsoft.com/en-us/Windows/cc164204.aspxRelease notes for Windows XP Service Pack 3
http://support.Microsoft.com/kb/936929/en-usList of fixes included in Windows XP Service Pack 3
http://support.Microsoft.com/kb/946480/
Steps to take before you install Windows XP Service Pack 3
Recommend the steps to take before you install Windows XP Service Pack 3.
Also includes troubleshooting information.
http://support.Microsoft.com/kb/950717/en-usJ W Stuart: http://www.pagestart.com
-
Solitare opens suddenly, with cards staked in a stack to the top left corner. I was not able to detach them to play a game. Help!
Hi Perren7,
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
2. type the following command and press ENTER:
sfc/scannow
3. the sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
If that is not enough then try to create a new user account and check what is happening. To create a new user account
1. to open user accounts, click the Start button, select Control Panel, click user accounts and parental control, and then click user accounts.
2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. click on create a new account.
4. type the name you want to assign to the user account, click an account type, and then click on create an account.
If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I was not able to download the updates of Windows XP
I have a dell machine running xp / sp3 who has started having failures to download or install updates may 9. Since then he has not installed updates even if it is set to do so all night at 04:00. It is also doing the same thing on the other computer desk in the small office LAN we have running off a verizon for DSL router. Chess began the same night, May 9. Here to install updates from the windows update page also failed. I ran the utility 'Difficulty now' from microsoft, and it has not fixed the problem.
Thanks in advance for your help to solve this problem.
Original title: I was not able to download the updates of Windows XP since May 9. Downloads keep failing.
If you have been playing around with the settings, you'd be wise to resinstall. All that are "machine accounts" which are automatically defined by the system to the evolution of random passwords. If you have accounts of changes of ntauthority to other accounts, you perhaps weakened the security level of the operating system.
No it's not a portal, that even Microsoft doesn't know what are these passwords.
-
I was not able to degrag - here is the message I get: "You must have administrator privileges to defragment a volume." Any ideas on how to solve this problem? Thx for the help.
Hi Joyce,
· Are you logged into the administrator account or a standard user on the computer account?
· The computer is on a domain network?
· Have you been able to run on this computer disk defragmenter earlier?
· If yes you did changes to the computer until this problem started?
Although any user can access the tool Disk Defragmenter, the ability to analyze the ordefragment one requiresadministratorprivileges of volume. To run the defragmentation operation, you must be logged in as anadministrator. You can check if you have the administrator privilege on your account and try to change the administrator account and check if that helps you run Disk Defragmenter.
You can access the link below and follow the steps to change the type of account and check if it helps.
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: upgrade
I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?
Hello
You buy Windows 10, as there is no free upgrade to Vista 10.
Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.
http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
Help and Support was not able to start
When I open help and Support Windows, it shows me the following error message:
"Help and Support was not able to startFor more information, contact your systemadministrator or visithttp://windowshelp.Microsoft.com.
(I'm the system administrator only)I am facing this problem for more than a year.System details:
Windows Vista Edition Home Premium SP2 32-bitInternet Explorer version 9Hi Aditya,
This could be caused by the virus or corrupted system files on the computer.
Follow the following troubleshooting methods:
Method 1:
Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.
You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.
Method 2:
Run System File Check to fix the corrupted system files and then check how it works.
See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.
Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.
If the problem persists, please answer. We would be happy to help you.
-
not able to run micro security essentials says need to reinstall the client security micro
not able to run the bases of microsoft security said that I need to install the microsoft security customer no idear was to conclude this
Additional posts appear in the MSE Forum:
Recommended as previously you could try to uninstall your MSE, then download and install a new copy of: File of Installation of MSE
If it does not contact the MSE Support as previously suggested.
-
Hi people
I'm on Windows 8, and in these last days, I get this message
" " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"
It is on a blue banner that goes directly to the screen and it is very annoying
I get updates through so I do not understand this
Any help would be great
PS I have tryied the restoration of the system, and it's always the same
Lee was soon
Original title: looking for some help please
Hi Lee,.
I had this same problem and it drove me crazy, but I solved it.
I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.
below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)
-
MAF: Not able to run the sample project or a simple project with only one page
Hi all
I am trying to run examples of applications of the MAF delivered with Jdeveloper 12.1.3. I am not able to run these applications on the device in the emulator. They gets deployed successfully. However, when I try to open these applications, it hangs on the initial screen of the Oracle.
I even tried to create a new MAF application with only a device with a page of the AMX. Tried to deploy, but still get the same result.
No idea what could be the problem?
Thank you
Ajay
Hello
Problem has been resolved, after the re-installation of the Jdev and MAF extension.
Understood that somehome, maf - application.xml couldn't refer to the features of the maf - feature.xml. When I created a new feature in the MAF - feature.xml, it was the adfmf - feature.xml and maf-application creation could refer to the functionality of this file.
This seems to me an installation problem. I have therefore re-installed, now its works very well.
Thank you
AJ
-
Hi.
Recently my home PC suddenly stopped working. If I was not able to uninstall beforehand. You guys he write off so that I can re install on my new computer.
Running Cs and adobe aftereffects. And I work for the IGT Australia.
Concerning
Dave Spencer
Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations
-only Adobe can help with serial number problems, nobody here can access the activation server
Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help
-read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html
-or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
PS - I like IGT games
-
The host CPU is not able to run 64-bit virtual machines
I am running VMWare Server Console on a Windows 2003 64 bit OS 1.0.3 and prepare to create a 64-bit VM server to test a new application on. This forum server works on is a SuperMicro SuperServer 6025 B - TR +. I entered the bios and activated the virtual bios in the CPU settings. However, when I start my VM, I get the following error:
«You have configured the virtual machine as an operationg system 64-bit client.» However, this host processor is not able to run 64-bit virtual machines or this virtual machine has 64-bit support disabled.
I looked online and saw some references to allow an EM64T which was to be activated but I do not see this option in my BIOS. Someone at - it any other suggestions as to what I have to do to get the virtual machine to use the 64-bit compatibility.
Unfortunately, the 1.x server logs are a little sparse in this regard. However, it seems that you have mixed steppings of physical processors. In this range of models, Intel changed the VMCS review between the Bx steppings and Gx steppings ID, making it incompatible for the execution of VT - x. Realizing their mistake, Intel has provided to OEMS for a microcode patch that makes the revision ID the Gx stepping VMCS matches that of the Bx stepping. OEMs distribute this patch of microcode as a BIOS update.
In short, an update of the BIOS of your system provider should solve the problem.
-
Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not, what needs to be checked in the menu options for mode 2 window window... I use Version 23.0.1
Hi gordie, you could use an addon to restore this configuration of the user interface: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/
-
system is not able to run the Apple Application Support service
I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?
Can you post the error message you get when you try to install or launch iTunes?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me?
Hello joebat,
It seems that some of your plugins (Shockwave Flash 10.1 r102) might be buggy or obsolete. To check for updates, please visit the plugincheck page. If this does not resolve the problem, try to start Firefox with the disabled modules and see if it helps at all. If so, delete the Shockwave Flash plugin and maybe reinstall or uninstall Firefox and do a new clean install.
If that is not yet solved the problem, try the following troubleshooting steps: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.htmlThank you for your patience and please let me know how it goes.
Maybe you are looking for
-
Are the Airpod 2016 just October is going to be compatible with iOS devices, or they will also be compatible with the Mac? Any thoughts?
-
750 - 170se envy: Bluetooth does not
Can I get some advice on getting my bluetooth adapter works on my DESIRE to 750? My bluetooth adapter does not work and is not detected by the computer. I tried to download the driver again on the HP site and installed it but still, bluetooth does no
-
Important emails going to spam
I had several cases where I thought friends were very sick. These are people that I send and receive emails every day, and suddenly, they're going to the junk e-mail folder are. It's the same thing with a daily newsletter which I agree with. Worse, t
-
I bought my daughter the slate for Christmas last year. The loading dock has not worked since March. It is still new looks. It has not been used because it does not charge. I don't want to buy him a new, I would get it fixed. Is it all the same to fi
-
Fuze will shut off randomly, then it takes a few seconds to turn on. After that I see the symbol of welcome, it says media refreshing and it takes about 5 minutes to complete. It is very annoying! Please a little help.