Not accessible event properties on PowerCLI report

Similar Questions

• CDROM and DVD report D:/not accessible win2k sp4 on new installation and trays open at startup

  Just installed Win2K an old pc with w2k being what came with it originally.

  Found problem when multiple upgrade files have been placed on a CD - R and then put in the CD on a new installation, and immediately it says D: / is not accessible and I think it says "service not taken in charge.

  Sought, and it was suggested to simply eject the disc and try later.  This does not solve it. And not 3rd party software, at all.    Installed nero 6, CD works fine with a disc recorded in trade, such as the Windows 2000 installation disc;  But apparently a disc recorded from another pc, with Vista using the option to make a data disc in the Explorer of

  After searching and trying several fixes, and read how others have tried but not corrected, Im trying to find the solution?

  And what happens at the start, both players, CD and DVD just open doors / ejection by themselves.

  During shutdown, the INCD app crashes and wont let close, but with or without nero or 3rd applications, the CD/DVD does not read a disc that I did.

  A suggestion said to check that the registry HKLM... but the specified folder was not there yet.  Now I know how explore feels.

  Ive searched but I'm still trying to find an exact solution for this, it's a pc to give to someone for Christmas

  
  

  Don't forget about power of Attorney

  Hi Brad,

  Windows 2000 issue you posted is better suited for the IT Pro TechNet public. Please ask your question in the Site Web of TechCenter Windows Client for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equium A100-549: Mat * un DVD - Ram UJ - 841 s is not accessible

  Hello
  I have read many topics all about problems with this unit, makes me regret buying the laptop, but for now, I'll have to try to fix it. My DVD device, I cannot access it if I put in a blank DVD or CD-ROM drive. When I click on the camera by computer or of the auto run pop-up menu, an error message appears saying "D: is not accessible incorrect function". If I insert a disk with some data on it it reads it quiet easily (DVD and CD-ROM of so it's not the calibrator laser). After reading works around the problem, I did the following:-

  -First I tried accessing the page of toshiba and reloading the drivers, without success

  -J' the continuation of many shooters of boredom, unsuccessfully tried

  -J' even tried formatting my laptop and reinstall windows (incidentally this violates my warranty and insurance?) and subsiquently once again, without success drivers

  I need help, and not only its desperate thank you very much!

  Hi André,.

  First, reinstall your system from the recovery CD will affect your insurance or guarantee. You can reinstall as often as you want.

  As for you problem with your optical drive, the first thing to check is that the option "Enable the Reording CD on this drive" is checked in the properties of the device option. Just right click on your optical drive in ' my computer and then select Properties option then the "recording" tab

  Finally, you shouldn't have to download all the drivers for your scanner, Microsoft base drivers are generally quite adequate. Usually, the drivers of Toshiba DVD-RAM support formatting of re = writeable disks and not the functioning of the drive itself.

  Kind regards

• Pavilion 500 t - not accessible when starting from CD USB key

  I am booting from a CD on my Pavilion 500 t to restore an image from a USB key.  I can boot from the CD fine, but after loading, my recovery (Ghost) software my USB key is not accessible.  Any ideas?

  Hi Steve,.

  Please report the number of HP for your PC product.

  How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers.

  You say that the ghost can not find the USB? If Yes, then try a USB 2 port.

• Windows install is not accessible error 1015

  Original title: Windows Installer
  Have XP Media Center Edition.  with SP3.  What version of the installer should I use (3.0, 4.5, etc.)?  When you try to uninstall a program via Add/Remove Programs, I get message that Installer is not accessible.  Also error 1015 in the event log.  Have you tried several recommended procedures here in 'Microsoft answers', but not of them worked; for example, I have not recorded and re-recorded msiexec.

  Thank you.

  Hello

  1. don't you make changes on the computer before the show?
  2. what program you want to uninstall?
  3 is the issue limited to a program?

  Method 1:
  Try the steps in the link and check.
  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003
  http://support.Microsoft.com/kb/315346

  Method 2:
  You can run the fix it from the link, if the fix it does not help then you can try the steps in the link and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Method 3:

  You can make sure that the Windows Installer service is running.
  a. open run and type services.msc, and then press ENTER. You can also go

  Control Panel and go to administrative tools and go to Services.
  b. search Windows Installer service to install all the ads.
  c. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.
  d. If you get the error trying to force start the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  Method 4:
  Download the latest version of windows installed and install it on your computer.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483

• File are not accessible by the system

  There is, I had restored my computer using suite recovery of my computer.  I backup all before starting the process.  After when the process was done and I had everybody works very well, I went to remove my files of backup for the space, but I have a really stubborn file/folder.  I'm going to remove it and I get a message saying that the file is not accessible by the system.  From there, I tried going through safe mode to delete, taking possession of the records, using prompt command to remove and even using Unlocker.  None of these methods was able to remove this darn folder.  Now, I don't know what to do next.  If unlocker failed to remove the folder, then I don't think that there many options remain outside to wipe the drive.  and it's something I don't want to do.  So, I ask, what should I do next?

  Picture of the Error Message

  Photo of properties of "folders".

  Hi ShoaJo,

  Error code 14, you can see the article mentioned and check.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  I hope this helps.

• Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

  Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

  I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

  I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

  There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

  The only program I installed XP mode is this one.

  Thank you.

  Hugh Humphreys

  Hi Hugh Humphreys,

  Leave the password empty section and see if the XPMUSER can be accessed.

  Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

  (a) Firstly, disable the integration features.

  (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

  (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

  (d) log in Windows by using the administrator account and the password.

  Note: The password is empty by default unless you already set a password.

  (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

  (f) choose the user you want to change and click 'reset password'. Set a new password.

  (g) click on "Advanced" tab, click on the button "Advanced".

  (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

  (i) check the "password never expires". Click on 'OK'.

  (j) then exit the settings and restart Windows XP Mode to normal mode.

  Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

  (b) set a password for your current user.

  (c) click on tools on Windows Virtual PC, choose enable integration features.

  i. type the password, check the box "Remember my credentials" and click OK to open a session.

  II. after joining the domain, logon in XP mode with the local administrator account.

  Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  If this does not work, post your request in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• I:\ is not accessible .__Incorrect function___and in the other CD as__Blank that allowing open, DVD RAM, changing to CD player by inserting a correct DVD.

  System configuration: Windows XP with SP3 (Original) and all other Microsoft updates. An engraver of DVD from LG (HL - DT - ST DVDRAM) - SATA & Samsung DVD writer (TSSTcorp CDDVDW SH-S222A SCSI) - PATA later do IE August 2010 & September 2010 with the latest firmware, Nero 8.

  On a previously written DVD Insert, complete correct IE fully functional in other dvd burners / rom, DVD RAM icon changes to CD with two blank CD showing player one and not accessible with the message above in the other happening too the DVD-RAM to CD drive.

  Not understand, reported the problem to the company service centers assuming failed drive to be replaced during the warranty period. Provided with other drives of different model but unfortunately same case again. Searched the Internet, consulted and I have tried all sorts of remedies, but without success. Although all CDs, written or purchased fully functional, only previously written DVD.

  Then tried the solution of Microsoft Solution Center as "Mats_Run.dvd". Same here as that 'Please insert media readable by the CD/DVD drive [I:].  Windows tried to open the CD/DVD drive for you. "and finally as ' media in the CD / DVD drive is not readable (TSSTcorp CDDVDW SH - S222A SCSI CdRom Device' with the status"not set".)

  Wasted a lot of money and time behind this problem try this this, but without success. So looking forward to you for that my major problem not identified as an emergency like with me for needing to use these data. Again, no problem at all on my side of the machine and quality DVD that are required to access. And kindly, as soon as possible. Thank you.

  Lately, just after the announcement of this problem, insert a blank DVD to check DVD writing. And yet even ONCE - DVD RAM changing to CD player in both and in the above statement PATA and SATA a blank CD. Sense DVD is not reading as well as writing. Please add this also.

  Hi Sreeparno Baksi,

  Try the methods below:

  Method 1:

  Uninstall Nero 8 on your computer. You can check the link that help you with the steps to uninstall program to add or remove function below: how to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895

  Method 2:

  Delete manually the filter upper and lower filters from the registry editor. See: (Section: fix it myself: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116 )

  See also the link below: Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP: http://support.microsoft.com/kb/314096

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Installer is not accessible

  Like AuntDi1947, I get an error message indicating that Windows Installer is not accessible, but I tried to install a new update for Calibre e-book management.  That's happened? I did that for a while now without a problem. Why is she suddenly disappeared?  How can I get the installer works again without an installer to reinstall?  I use Vista 32 SP2. Please help me.  Thank you.

  Hello

  Were there any hardware or software changes made on the computer before this problem?

  Try the methods below.

  Method 1

  To check if the Windows Installer service is set to Disable.

  (a) click Start, type services.msc in the start search box and press on enter.

  (b) in the list of Services (Local) , right-click Windows Installer, and then click Properties.

  (c) if the drop-down list Startup type is set to the valueoff, select the Manual option in the drop-down list Startup type .

  (d) click Start under theservice status section, and then click OK.

  Method 2

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651/

  Download the latest version of windows installed and install it on your computer.

  http://support.Microsoft.com/kb/942288

  It will be useful.

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• HARD drive not accessible

  I have two hard drives (C: and E :) on my computer. E: has been used as a backup. I now use an external HD for backup. When I re-formatted E: it shows the disc to be full when I check its properties. When I try to open Explorer or e: a window opens stating "E:\ is not accessible. The parameter is incorrect. "How can I get this back to a usable HARD drive? Thank you

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you run the clean command. Follow the steps mentioned below.

  a. Click Start and type cmd in the start search box and right-click on the cmd present in the menu.

  b. click on run as administrator.

  c. type the following commands as follows.

  DiskPart

  List disk

  Select disk 1 (if disk 1 is E :)

  Clean

  Note: Be careful while selecting the disc as it might format the other disk instead of e: take note of the size, and then check the size in the command prompt and then wipe the drive.

  d. check if you are able to recover the system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pen drive not accessible, incorrect function

  Hello, when I insert my USB into the usb port, it is detected but when you try to open it, I get a msg saying "is not accessible incorrect function" when I see the properties by right clicking it shows zero used space and zero space available.what can I pls say me.help me please please

  What is the drive works on another computer?  If it isn't then it is probably corrupt or failed.

  "ArunTeja" wrote in the new message: * e-mail address is removed from the privacy... *

  Hello, when I insert my USB into the usb port, it is detected but when you try to open it, I get a msg saying "is not accessible incorrect function" when I see the properties by right clicking it shows zero used space and zero space available.what can I pls say me.help me please please

• "C:\ is not accessible. Access is denied"error message

  original title: TEARING OUT MY HAIR - I'm a fool.

  I was playing with advanced sharing and privileges and now I can't access to my c drive.  I feel like a fool.  I don't know what I deleted, but it does not restore my access.  He said "C:\ is not accessible.  Access is denied... " I right click on the c drive and try to change the privileges.  For example, to provide access to everyone, users, guests, etc. - and the message I get is "an error has occurred while trying to change the admin part.  Access is denied"- HELP.  I'm so frustrated.

  In volume NTFS, only the owner of an object (file, folder,...) which can change permissions for this object. You must take possession of your C: drive somehow, after this only that you can grant permissions to users.

  Try to get into safe mode, log in as 'Administrator' (enable that account first if it is currently disabled). Then right click C:\ drive, click Properties. Go to the Security tab, and then click Advanced. Go to the owner tab, and then change the property to 'Administrator' first. Then, grant permissions like these for these users [CMIIW]:

  Authenticated users: read, execute, write, edit,
  Administrators: Full control
  TrustedInstaller: Full control
  SYSTEM: Full control
  Users: Read, execute

  Finally, change the owner once more to "TrustedInstaller".

• [The content source < iehistory: a bunch of #s] are not accessible.

  Hello:

  I get a bunch of them in the observer of events as warnings.  Not sure if I have problems because of them or not.  Everything seems to work OK for me.

  Here is a list:

  #1:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #2:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #3:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #4:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: The object was not found. (HRESULT: 0 X 80041201) (0 x 80041201)

  #5:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #6:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  Some of the above are repeated 3-4 times. I noticed that the changes from 1000 to 500 in some of them.

  When you first start, these error messages appear.  Not sure whether or not they are part of the problem.

  #1

  The gatherer is unable to read the registry URL.

  Context: Application, catalog creates

  Details: (HRESULT: 0 x 0) (0x00000000)

  #2

  The search service has detected data files corrupted in the index {id = 431}. The service tries to automatically correct this problem by rebuilding the index.

  Details:

  The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801)

  #3

  The Windows Search Service is stopped because there is a problem with the indexer: the catalog is corrupted.

  Details:

  The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801)

  It was then rebuilt:

  Windows Windows (3524): the database engine has successfully completed recovery steps.

  Any ideas what to do?  Or is it quite 'normal' during boot?

  Thank you, Rick

  Hello

  Are you facing any problems when working with programs?

  Note:

  The event logs that you have posted here refer to errors with the search Index in your computer. These are not fatal errors. However, they certainly point to the fact that some of the sites indexed on your computer are not accessible for the mechanism of research due to various errors. These errors should disappear once you have performed the following steps.

  Method 1:

  You can run the fixit from following link and check the issue:

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/

  Method 2:

  You can try to rebuild the index to see if it works:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Let us know if it helps!

• Drive external drive is not accessible, access denied.

  My computer (Win7 Home Prem) ran chkdsk after an update of windows, probably triggered by ccleaner or glary utilities. My external hard drive was plugged during the update, reboot and chkdsk. The chkdsk command probably checked my coz external HD, I can see folders/paths that were there. The next day I couldn't access my HD due to a mistake, saying: it was not accessible and access is denied. I searched online potential solution and tried the following without success, and they have been applied using an admin account and an admin cmd.

  * Change the permissions and ownership, but the property always says it's impossible to determine the owner.

  * Changed the share permissions.

  * Do you have 'takeown' and a 'icalcs' has changed owner but same error.

  * Check the disk management, drive seemed ok with the letter drive and all.

  * Ran chkdsk /F on both of my C: drive and external hard drive, both completed successfully without error during the analysis and not found bad sectors.

  * Program of Unlocker used to check if player was running another process, found nothing.

  In my computer, it shows the letter drive and NTFS, but not bar showing free space. Properties would show 0 free space / used. Here I can go to cmd and access the content from there. I used the function of 'Explore disk' of glary Utilities and I could see the content and even run mp4/avi files in the player. So I guess the drive and its contents is ok, just that I can't access it through normal means.

  Thanks in advance!

  Rob

  Hi LeBlanc,

  I apologize for the late response and can certainly understand your concern. I appreciate your efforts. As you mentioned that you are not able to access the external drive, and you receive the error of access denied when you connect to your user account, I suggest to try to create a new administrator user account and then try to access the external drive.

  To create a new user account, please follow the steps mentioned in the link below:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Please let us know if the problem persists.