Not capable of much Windows XP install KB971029 machine.

Similar Questions

• C40 satellite function keys do not work outside of Windows after installed own W10

  Hello

  C10Q C40 is already a squeeze tight with only one disk of 32 GB mem. So I an install clean of W10 and everything is great, with lots of room to spare now - EXCEPT - some function keys do not work as the empty screen, while the windows outside, using a boot CD, none of them work. I need to download a driver utilities Toshiba? Cannot find it anywhere!

  Win10 drivers can be found here http://www.toshiba.eu/innovation/dow...jsp?service=EU

  Install the driver of Toshiba, Toshiba system and settings system.

• stream HP 11 x 360: Touchscreen on stream 11 x 360 does not work after 10 windows clean install

  I did a clean install of windows 10 on my HP 11 x 360 stream, and now the touchscreen does not work. Under system, it says 'no pen or touch input' and there is no driver touch screen not listed under HID in the Device Manager. It worked when windows 8.1 has been installed and it still works in the BIOS. None of what follows has worked previously:

  reset

  several windows updates

  several updates using HP support assistant

  looking through the list of 8.1 windows HP drivers (apparently not all list a touch screen driver)

  looking through the list of drivers for windows 10 HP that was recently added.

  Either by the way, I was about to Flash the BIOS when I noticed that the version on the Web site is f2, and mine is f4. I don't know what that means. I end by flashes, however.

  I remember seeing what I thought, he was a pilot of the touchscreen when you look under programs and features in windows 8.1 before the upgrade. I think it was called magic something or other...

  Microsoft Web site indicate that windows touch support in the oven, so I don't know why it is a problem.

  Update:

  I installed the windows version 8.1 of 'Serial IO driver without connected sleep Support Intel' and he's got the touch screen works, but the accelerometer does not always work.

• Can not activate wireless after Windows vista install driver problem?

  Hi all

  Don't know if this is the right place for the post, if not I apologize in advance.

  I have a Compaq Presario C700 (C730EM) on which the hard drive died on me, I have brought a new and installed Windows Vista disc premium edition (not a backup / recovery disc).

  Everything seems fine but I can't turn on the wireless, the C700 has a button at the top wireless rough (which has a red LED when not away) to the left side. Normally impose you it, and it lights up (turns blue LED) but nothing!

  I have commented on Wi-wired and update windows etc and have tired to find wireless driver I guess that I'm missing? You are not sure if it's wireless missing driver or a keyboard driver?

  After installing a few drivers I found where time no joy!

  Can anyone help?

  See you soon

  P

  You are the very welcome.

  This driver below should set you straight up.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Best regards

  Paul

• Not available after a Windows 7 install own switchable Graphics

  Hello

  I had to clean install Windows 7 due to a problem that I created in the first place. In any case, everything works fine, except for the Radeon graphics card.

  I own a HP Pavilion g6-1279sl Notebook. It is supposed to have an Intel HD Graphics 3000 and an AMD Radeon HD6470M.

  I installed the latest version of Catalyst driver and when I right click on the desktop, it says "switchable graphics", but if I click on it, it shows me just another option of the catalyst, HydraGrid.

  Using a tool that shows what video card is currently running, I noticed that, even when I'm running games, the graphics card Intel's works, giving a whole worse performance that the Radeon should give. I mean, the Radeon never works. I also tried to disable the Intel of the Device Manager (I think it's called like that, I have a portable Italian), and there have been problems because of the card Radeon runs does not correctly.

  The BIOS is updated and no other choices don't worry we Switchable Graphics.

  Is this what can I do to access the feature back?

  Also, I'm kind of a newbie, then I want you to be clear in the explanation of things me!

  Thank you

  Sorry if I happen to reproduce an old post, but I have not found a solution in messages older.

  Hope you can lend a hand,

  Ruben Tura.

  Hello:

  The only driver that you can install is the AMD driver page driver and and care of your laptop.

  Uninstall the graphic drivers you have installed (AMD and Intel) and only use this one...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99756-1&cc=us&DLC=en&LC=en&OS=4063&product=5173421&sw_lang=

  You are unable to update Intel or AMD graphics drivers individually, or switchable graphics will not work.

  You cannot use the drivers supplied by AMD or Intel Web site.

  Support page and the driver of your laptop is a driver made on order and unfortunately, it is not updated.

  But it's the only one that you can use if you want the chart to work properly.

• Windows XP does not correctly load after installing Virtual Machine

  Original title: System Restore

  I recently tried to install a Machine Microsoft VM on myWindows XPcomputer. By getting a message "Please reboot", I clicked on "restart now." The computer turned off and running back. When he steps back, the loading screen appears, and then the blueHP Inventscreen appeared (which is normal). But then something odd happened. A small window appears in the left corner of the screen. It read: "loading your personal settings: System Restore, Control Panel, etc...", or something of the sort. The default software supplied with the computer window appeared. The blue HP Invent screen continued to remain in the shadows.

  When I eventually clicked the 'x' in the antivirus window, the taskbar, start button, etc. appeared, but most of my desktop icons were missing. Then I noticed that the blue screen of theHP Ivent became my wallpaper. Puzzled, I navigated to the 'System Restore' window. Then, several windows titled 'Welcome in Windows XP' and "Turn Windows XP" appeared. I have navigated to System Restore window and chose a system restore point (which was the day before) and continued the process of system restore. The system was supposed to be restored. At startup, the same window in the left corner appeared; the antivirus window is appeared. The system restore window is appeared then, confirming that the system restore was successful (which it wasn't). Everything was the same way before I had done the system restore.

  In a panic, I went to Internet Explorer. The browser then showed up and greeted me with messages as if I had never used, and [if not all] most of my favorites had been withdrawn. Then, I assumed that my computer has been restored to factory settings. But of course, in opposition to my thesis, my Antivirus AVG software  that I had installed before all these problems occurred, was still on my computer. My iTunes was also still on my computer, but my entire library has been destroyed, and when I double click the icon, it asked me to install the iTunes software (as if I had just downloaded on my computer).

  I procceeded to try to restore my computer to different restore points, but all attempts were in vain, because no settings have been changed... And that's my story. Also, I would appreciate some answers detailed as soon as possible, because this computer is not me anyway... Thanks for reading guys!

  I recently tried to install a Machine Microsoft VM on myWindows XPcomputer. By getting a message "Please reboot", I clicked on "restart now." .....

  the small window that you mentioned is probably the virtual machine window.  and if you it configured during installation, as attributed too much ram memory and disk space, and then the windows in normal mode went out of these valuable resources.

  In addition, if the system disks and files was not optimal performance via tune ups, then they could have been less than optimal before installing the vpc and the systems simply becoming worse by installing more data.

  regarding the failed system restore points, we don't know why they did not work.  but the system restore function is stable, except somethings interferes with her bad anti anti-virus programs or system files have been corrupted with infections beyond you're a.v design..  the bottom line is that "who knows?"

  You can probably try is to start in safe mode and try to uninstall virtual pc via Add/Remove programs in the control panel.

  then see if the normal mode is normal once again.

  Another method, you can try again in safe mode is the restoration of the system again.

  then see if the normal mode is normal once again.

  Another method, you can try in safe mode, you can try to perform a clean boot to normal mode.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

  Hi all

  I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

  This application is not compatible with the operating system installed.
  Please upgrade to Windows 98SE, Windows 2000 or more.

  I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

  I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

  Please help if possible

  Thank you very much

  Pierre Viljoen

  Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

  The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

• Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unc

  Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unchangeable.

  Select the sidebar if hidden. View options > view as may depend on which of the options for the song, artist, album, etc. are selected in the sidebar.

  TT2

• Windows Vista install the new WD hard drive empty - does not not :(

  It was my original question: http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-Pavillion-a6645f-No-hard-drive-detected-BIOHD-2-err...

  And now...

  I got my CD of HP recovery and ordered a new WD 500 GB HDD... same features as the seagate who pooped me and I can't get windows install on the new HD

  No matter what I do, computer wants to open the Recovery Manager and according to the available procedure does not work.  It works me in circles asking for #1 drive, then the drive recovery supplement and back with no progress.

  What I have to do is use this form: http://vistahomepremium.windowsreinstall.com/installnewhdd/installnewhdd.htm but only the Recovery manager opens when I boot from the CD.

  Anyone have any ideas?

  If I followed your questions correctly... you had a BIOHD-2 error, ordered HP recovery discs, replaced the hard drive and tried to restore your system with no luck. Is that a correct assessment of the situation?

  OK, you need to make a Windows Vista install screen... not who's going to go with your HP recovery CD/DVD. The disks do not contain the Windows installation routine, only the HP Recovery Manager. These discs contain more or less, an image of the HP installed OS and software, plus some drivers and applications. To the best of my knowledge, you should have three DVDs (1 of 3, 2 of 3 and 3/3) more an additional drive. You should boot from CD 1 of 3... Then, when asked to insert the 2/3... Then, when asked to insert 3/3. And finally if/when necessary additional drive.

  At HP; Recover the system after the hard drive is replaced (Windows Vista)

  Frank

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• the total war Rome and the barbarian invasions installed smoothly, perform perfectly on xp, but not at all under windows 7

  just bought the total war rome and expansion (barbarian invasion) today.  I installed the game and expansion on my computer laptop windows 7 and my the family computer that runs on windows xp.  on my computer laptop windows 7 installed, gently, but the game will not run at all... which means that I click on the shortcut on the desktop and nothing happens.  the only way to open the game is by going to my computer, select the cd drive and then opening the romeTW.exe file.

  However, this makes me only to the main menu of the game and this is where the real trouble begins.  Once there, I click on "play rome total war" or in the case of the expansion pack 'game barbarian invasion' which instead of leading to the game itself it just crashes me to the menu let me back at the office level.

  on the side, I met NONE of these problems on the computer of windows xp from my family.

  I tried to make the game compatible with windows xp (service pack 2), which is recommended and Windows xp (service pack 3) I even gave a shot, but none has made a difference.

  I now try to uninstall and install the game for a 3rd time and this time I will try to install under xp compatibility.  If you could please leave a message instructing me on how to do that would be extremely useful

  Thank you

  Hi the skins53,
  
  You may be using a Windows 7 64-bit operating system. Rome total war - barbarian invasion is not compatibile with Windows 7 64 bit operating system. However, it is compatible with a 32-bit version. Click here to check.
   
  If you use a 32-bit Windows 7, try to right click on the romeTW.exe file and run it as administrator and check what is happening.
  You can also check the event viewer for any game related errors.
  See article.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  I see that you answered in one of my previous answer on the same question. Try these steps as well.
   
  Post back with the State.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• LaserJet M1522 \HP: I can print but not scan after 10 Windows installed with HP LaserJet M1522 after trying things on this

  I spent many hours on this forum today trying to solve my problem.

  Everything was fine until Windows 10 installed after I * thought * I hit cancel their incessant commercial.   Before the upgrade of the OS,

  1. I used a shortcut to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\HP\HP LaserJet M1522\Scan which took "C:\Program Files (x 86) \Hp\Digital.

  2. a dialog box appears asking me to choose from a list of profiles of scanning that I did. Once what to choose, I have a second dialog box.

  3. I put the "paper Source" flat and the "Picture color" selected option button.

  4. I USED to be able to just click on Scan and then another dialog asking where to save it but neither preview nor Scan make the scanner scan button.  Overview gives me the wave 'an error occurred... ". Select "vernissage" again.  If I click on Scan, just all disappears.

  ______________________________________________________________________

  I have tried the following to solve this problem:

  Installation of new drivers.

  Doctor to Scan running (here, the green progress bar ends after the "HP M1522nf Scan LI" scanner picking and ending up with an error "Connect without success".)  It allows several options.

  -J' tried power cycling everything.

  -Click on retry.  I take the last option in the list and it gives another green bar and I ended up a complete turn to the first page of the Scan Doctor with the "HP LaserJet M1522 MFP Series PCL 6" and "LI Scan M1522nf HP".  Both still have network connections and "installed".

  -Continue the Scan doctor, I click install get.   I created which today many times without success.

  I came to support and went through what looks like my problem even, but nothing seems to help.  I spent several hours to do.

  I should also mention when it came time to download the drivers there are 3 categories.  In the first category, there are 3 drivers.  I went through each of them at this stage.

  I realize your question at the top of the page is "HP printers - WIRELESS card Scanner is lost (Windows) ''."

  I'm afraid to do an uninstall of HP "stuff" because my computer is a HP and I don't want to aggravate my problems than they already are.

  I understand there is a windows application to use for scanning, but because it also controls the camera to the computer, I wanted to stick with the simple scan, which I used for many years now, coming to scan from my HP scanner/printer to my HP computer.

  Thanks a lot for your opinion.

  OK, got it to work!

  Desinstallion old prinerdriver as good as he got, withdrew the rest of this register and recycled the ' puter.

  Then installed latest firmware for the printer (do not know if this was necessary, but it had those of 2009 and the most recent from 2013, so I guess it wouldn't hurt).

  Installed the latest universal driver for HP (this still does not solve the problem but...)

  Finally reinstalled former driver Win 7 complete solution and then it works. I guess it fills some gaps while retaining the more fresh drivers?

• SIRIUS Internet Radio Media Player not working not properly because Windows update installed on my PC

  My Sirius internet Player multimedia radio is not working properly because Windows updates are installed on my pc. updates KB971486 KB974455 KB974571 KB975467 KB975517 KB974155 KB976525 KB974470.  Tested internet radio/media player for sirius on another computer and there is no problem.  Have tried all of the fixes recommended by sirius... This update of windows seems to the source of the problem.

  Does anyone have an idea with security update could be the cause of the problem?  Should I uninstall this?  If I find one that is causing the problem, how can I block it to move again?

  Thank you

  Hi Smwall,

  Welcome to the Microsoft Answers site!

  Do you have a particular error when you try to play?

  Method 1:

  You can try to start check and clean boot if the problem persists. Clean boot boot will help you know if all the background programs conflicted with the player. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Method 2:

  You can try to uninstall the updates one by one in the windows update window and check if the problem persists.

  To uninstall the updates from windows update:

  1. open installed updates by clicking the Start button.

  2. click on Control Panel.

  3. click on programs

  4. under programs and features, click view installed updates.

  5. click on the update that you want to remove, and then click Uninstall.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more details, visit the below given link:

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Method 3:

  Alternatively, you can hide the update, which does not allow the player to play.

  Follow the below given steps:

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. do one of the following:

  ·         Click the link that tells you important updates are available if you have some updates to hide.

  ·         Click the link that tells you optional updates are available if you have optional updates to hide.

  3. Select an update that you want to hide, right-click, and then click hide update. Do this for each update you want to hide.

  4. click on OK.

  For more information about Windows Update troubleshooting visit the below given link:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• HyperBowl will not start in XP SP3 / cannot install Windows update KB924867 (service pack is newer than the update...)

  original title: hyperbowl will not start in XP SP3 / cannot install KB924867

  Hello

  I just reinstalled windows XP and done all the updates. I then reinstalled hyperbowl 3d and it will not open up. Now it used to be that if you ran the update:

  Update for Windows XP (KB924867) http://www.microsoft.com/download/en/details.aspx?DisplayLang=en&id=6446

  It would solve this problem (see http://hyperbowl3d.com/oldsupport.html).

  I downloaded the update, and it says:

  "Setup has detected that the version of Service Pack for this system is newer than the update you are applying"

  So I can't install the update. Is it possible to reinstall this hotfix without remove SP3 or is there another work around, I can use?

  Thanks in advance!

  Welcome & thank you for your comments.