-> Not connected message on the appliance.log

Similar Questions

• 1102w does not connect correctly to the Airport Extreme Base station (Time Capsule) (wireless)

  & #3; I've been troubleshooting all day on this problem for my parents, trying to set up printing wireless for them on their new HP 1102W. I am trying to connect the printer wireless to their Airport Time Capsule base station. Using the WPS configuration, the printer is recognized by the base station, but I'm still not able to print wirelessly or via airprint. Enter the web configuration via USB, I see that the printer is grateful the network, but it doesn't have an IP address (it is set to auto/DHCP). Later I tried to connect to a shared of my iphone, wifi connection and everything worked perfectly, so the problem is that somehow the printer will not connect properly to the Airport base station. I tried several resets and restarts the printer and the base station, and the printer and the base of the station has new firmware. I also tried to change the security on the terminal of the default wpa2 personal wireless with wpa/wpa2 personal.

  I'd appreciate comments on this issue because I am quite frustrated now :-)

  Using the tool of the airport, I logged on to the base station and changed the wifi settings, while 2.4 and 5 ghz networks have different names instead of identical names standard. That did the trick, eventually I just configured the printer using wps in a few minutes.
  
  Thanks for your help.

• Password just changed an hour ago. I can not connect. Error: "the user profile Service has no logon. Unable to load the user profile.

  Original title: just changed password an hour ago. I can not connect.

  Password just changed an hour ago. I can not connect. I don't have a password reset disk. When I type the password and press ENTER, the next page says ' THE SERVICE PROFILE has NO logon USER. USER PROFILE CANNOT BE LOADED. »

  Hello
   
   
  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
  
  Try to connect to your computer from another user account and follow the steps listed in the article below.
  Check out the following link and follow the steps to solve the problem:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Note: If you do not have any other user account the computer checks to see if you can boot to the desktop insafe mode , and then perform the steps listed.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The service user profile Service could not connect to view the user profile cannot be loaded. I loaded Microsoft updates and can not connect on my windows7 starter system. __

  I can not connect to.  Software Microsoft gets Ths user profile Service Service has no connection user profile cannot be loaded.

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• AirPlay does not connect without restarting the computer

  Hey guys,.

  I work in a school and all teachers have a MacBook Air 2011 or newer running 10.10.5 or newer. Many also have Apple TV connected to projectors so that they can use AirPlay to reflect their computers to projectors. So here's the problem:

  A couple of my professors can connect to their Apple TV and use without problems, but when they log off of Apple TV, the image of airtime in the bar of menus remains blue (which is normal when AirPlay is enabled). The problem is teachers are unable to reconnect to the Apple TV because the computer thinks it is still connected. Restart the computer to log in again!

  The computer will display the Apple TV as a device which we can connect to, but it never connects once it has been disconnected. It is a problem because teachers often connect to view a video and then disconnect so that they can work on their computers. If they try to reconnect, they need to restart their MacBook Air.

  ATV is up-to-date. Has been restarted and connected to another network and always has the same question. Not sure if this is ATV related or associated with MacBook Air. The two devices are connected to the same network that has no restrictions.

  I think I've cracked it because I had the same problem and since there are 2 minutes I solved it.

  Open activity monitor

  Click on the tab network and research AirPlayXPCHelper.

  This quick process and fact.

  Not sure if you have to do each time it stops working, but it is much faster that restarting your computer.

• Mini Mac does not connect to restore the iPad 2

  I work in a public library, and we have several iPad 2s who lend us out for our guests to use. Between each user, restore us the iPad to factory default with a mac mini, then reinstall our applications from the iTunes backup. Since we have upgraded to iOS 9.2 a month ago, we had trouble getting the restore process of working part. When we try, we get this error message: "there was a problem downloading the software for the iPad. The requested resource is not found. »

  The mini connects to iTunes and can surf the web without any problem, we do not have any anti-virus installed on it, and we tried to connect via our LAN and WiFi. We have the latest version of iTunes and the latest iOS on the mini. We rebooted the mini many times. I checked the file hosts, in accordance with the instructions from apple, and apparently is not the issue. I am able to restore the iPad on a Windows PC and then move them to the mini to apply the settings of our saved backup, so I think the problem is with the mini itself, although it now occupies about 3 times more time to reinstall the applications as before.

  We've been ready ipads in recent years without any major problems and have made no changes to the default settings of the mini otherwise to update the iOS. Restore the iPad is the only thing we use the mini for. I would appreciate any advice.

  What OSX version and what version of iTunes?

  You say Mac mini Mac OS X (10.7.5)

  The last OSX is 10.11.2 and iOS 9.2 requires at least 10.8.5 to get the required iTunes version

• No printer not connected message bypass

  I have a hp deskjet 970cse - the Flash drive to the printer is broken so I got a cable that plugs into the printer cable from old school on USB in the computer - but I get a message "no printer connected" when the wizard recognizes the cable - how can I work around this to get my printer to work?

  Hi Trudi Brown,

  This error message occurs generally if the printer cable is not connected properly.

  It is possible that the other cable printer cable that is old school is defective.

  I suggest that you download and install the latest driver of printer from the HP Web site to eliminate any software problem.

  If this does not help, then you will need to contact HP for replacement of the cable, or get help.

• Unable to connect anything to the event log.

  I try to get the text of debugging in my program appears in the journal of the events of my Simulator (or anywhere else), but have had no luck. I'm talking about the journal join you by going to tools/Event Log.

  First I tried printing to System.out and System.err nothing has appeared in the newspaper.

  I then tried using the EventLogger, but still nothing. I did something really simple:

   long GUID = 0xaffff32c2ffffcffL;
   EventLogger.register(GUID, "test", EventLogger.VIEWER_STRING);
   EventLogger.logEvent(GUID, "testing!".getBytes());
  

  I can't think what else to try! If not, how can I try to get the impressions of debug my application?

  In our applications, treatment that adds events to the stored matrix is also a System.out.println (...) and therefore the output goes to the output in the JDE window.

  The log of the events for the Simulator window has a different goal - there is help on the Simulator 4.6 "BOLD":

  "The event log window displays information about events that occur between a device simulated BlackBerry® and its environment. The BlackBerry device Simulator saves the event messages for events, including when you simulate playback of audio files, place a phone call and flashing of the LED screen. »

• "Not responding" message at the beginning upward. SOLVED by the creation of a new identity &amp; import the messages from the old to the new.

  This only happens on one of my identities, the rest seems to agree...

  When I start this identity, it's really slow & as soon as I click on anything it says "not responding".

  After some time (about 10 min.), he will finally do something but, after a few clicks he strikes again.

  8.1 Windows, IE 11, new software Thunderbird

  While I appreciated the responses, I have completely abandoned after my last post that with the two security modes by running this identity still did not...

  I found myself fixing by find and save the messages of this identity, creating a new identity folder and import the messages from the old to the new.
  And then deleting the old identity in the list.

  users /(your username)/AppData/Local/Thunderbird/Profiles

• My Thuderbird for mac does not delete messages from the server and can not find the setting in tools to do.

  According to the forum users, you go to tools-> account settings and there should be a box to "leave the message on the server" that I can uncheck, however, I don't see that my Thunderbird program for mac.

  You use the POP or IMAP protocol by e-mail? I guess that IMAP because you do not see the option.

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• in Farmville you currently have not all messages in the diet of your game.

  You currently have not all messages in your game stream, the error message that I get to Farmville

  URL of affected sites

  http://

  Hello

  You may need to contact the help of Facebook or Farmville on this error message support. Do you get the same error message in Internet Explorer?

• Put in regular page of e-mail does not display message in the list messages

  Hello

  I've updated my MacBook Pro at El Capitan and my wife Airbook.

  We both use the classic layout in Mail.

  After the update my Mail shows the message in my message in the message list a list (as it always does) I use this option so I don't have to double-click Mail and open it in a window separate to read.

  On Airbook my wife a message highlighted in the list does not appear in the list. (there is a small circle at the bottom of the list and hovering over him the cursor moves on the symbol to stretch or shrink the window, but it is just not there). She had it works just like mine before moving to El Capitan.

  This thread: Mail (El Capitan): display the preferences

  "says:

  Use Classic layout

  By default, messages are displayed next to the list of messages. To make messages appear below the list of messages (typical configuration), check the box. »

  I'm not sure what this explanation or if she's talking about my problem.
  I have no idea how to get the classic page layout to work the way it did before.
  Can someone help me get mail on the Airbook to redisplay the message highlighted in the list under the list?

  THX
  Brick

  Hello brick,

  Thank you for using communities of Apple Support.

  I see that your wife's Mac shows the display of the message during the classic presentation.  As you can see the small circle at the bottom of the screen, indicating that the screen has been pushed all the way down, eliminating the part look at a message.  Simply click, hold and drag the symbol upwards to bring this part of the Mail window.

  See you soon.

• Can not send messages on the hotel network, Server error: 550 5.1.1 &#60; * address email is removed from the privacy * &#62; rejected recipient

  and impossible to email - they get bounced back with the error, Server error: 550 5.1.1 <*** email="" address="" is="" removed="" for="" privacy="" ***="">recipient rejected, relay not allowed here. "What can I do to fix this?

  See if you can access your account via webmail.  This way you are not blocked.

  Most e-mail providers don't allow you to send from a location which you are not connected through their service.  So if you leave the House and connect, then they block to prevent spammers to send through their service.  Many have a way around this in the account settings, but only your e-mail provider may indicate what are the appropriate settings, because they are specific to the provider.

  Steve

• Network Assistant will not connect pc to the LAN, but connect to the internet properly

  My main PC had been connected to a local network of four PC but abruptly dropped from the network.  I can connect to the internet OK, but the wizard does not reconnect me to the local home network.  I read other articles on test and checks and everything seems to be okay, but when I check my network places other computers are running and are not displayed.

  Try the following and see if it helps:

  "You can not access the shared files and folders or browse computers in the workgroup with Windows XP"
    <>http://support.Microsoft.com/kb/318030 >

  HTH,
  JW