not enough privileges to a procedure

Similar Questions

• Not enough privileges to install a program

  I have problems with windows install, when I try to intall a program I tells me it doesn't have privileges to modify some files even when I click on run as administrator.

  I can't install a new hp officejet 4500 and I have even one of the team members of support was trying to install the software remotely and we still receive an error code 1603 (fearful installer of sufficient privileges) to edit the file X:\TR-SCAN.chm. I tried by their instructions to disable the windows update and disable startup programs and who did not. Help, please.

  Temprarily disable your AV software (or security suite software) while you try the procedures shows it is possible that this software may interfere with the installation process.  Don't forget to turn it back on everything when you're done.

  Try to install the monitor from http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx process, then try installing the printer.  If it fails again (as I suspect it will be), then open the process monitor and check to see if it provides information about the cause of the installation problem.  It so, according the results here and we'll see if we can find the problem.  BTW, make sure you do all this logged as an administrator - it will not work if you try to do it as a standard user.

  Try a boot minimum http://support.microsoft.com/kb/929135 and see if you are able to proceed with the installation of this mode.  If it still does not work, return the system to normal state, in accordance with the procedures and restart - this procedure will not help to solve the problem.

  Try to start in safe mode (repeatedly press F8 during startup until you see the menu) and repeat the installation of safe mode (if it will let you - it will not allow you to do but it's worth a try).  If this does not work, reboot to return to normal mode.

  BTW, the error message mentions X:\ drive.  You have a X drive on your system?  I can't help to wonder about this file is located in fact and if the question has something to do with an error on the disk you referring to a file on the network of the constructor which you have obviously no access or rights.  Maybe you can get their technical support people to direct you to a location to download a new copy of the software or have them email you (if your e-mail service can handle a file of this size).  The sad truth is that it seems much more a problem with the HP software only a problem with Vista.  If you are talking with people from their tech support once again, ask them if there is another way to lift the printer and running outside the standard method, they tell you to use - there may be alternatives that they disclose or normally use because they are too complicated or because they can cause problems if done wrong (but it can work to help you get installed it).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Java Version 6 Update 29-'not enough privileges to complete installation'!

  I need help please! I tried to download Java Version 6 update 29, but at the end of installation it is says something like "insufficient privileges to complete installation"! How can I fix it? I have a windows XP

  I guess that you have administrator privileges on your machine...

  Half the time, this problem can be fixed by going into the Control Panel Add/Remove Programs, uninstall Java, then reinstall Java from the web.

  The other half of the time, the uninstall will fail.  In this case, run the uninstall troubleshooting utility to this page:

  "Solve problems installing and uninstalling programs on Windows computers.
    <>http://support.Microsoft.com/kb/2438651/en-us >

  HTH,
  JW

• Cannot be stored in itunes, not enough access privileges for this operation

  Download the message saying that itunes cannot be saved. not enough access privileges for this operation

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• The OFA error: you have enough privileges for the operation. Please contact your system administrator. (Hello world does not)

  Hello

  My business that we are upgrading to R12.2.5. I downloaded the latest patch from metalink jdeveloper and trying to configure jdeveloper. When I ran Hello World program I get an error of "you have enough privileges for the operation." "Please contact your system administrator."

  I have facility for all the configs needed in the project but still is the same.

  
  When I fell on the debug mode. I got the same error with the missing config file.

  Please check below the debug message:

  November 4, 2015 16:47 oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig

  INFO: oracle.adf.share.config.ADFConfigFactory no META-INF/adf - config.xml not found

  Help me its urgent.

  Thank you

  Thanks for the reply to my post.

  I used the position and he help me solve the problem.

  As I'm working on R12.2.5 which is the latest version of oracle, so the solution was not entirely correct, but helped me dig the real solution.

  After that the implementation of Jdevloper below is the steps I followed

  1. change the profile FND option: validate IP address - no

  2 al ' Jdeveloper go to tools--> embedded OC4J preferences--> Global--> starting--> address local IP select by default.

  It helped me solve my problem.

  Thank you

• Not enough disk space to convert the iPhoto photo library

  My wife iPhoto library has about 9 500 photos. She has a MacBook Air, which has limited hard disk space, so we put his iPhoto library on a SD card (which is still in its SD slot). We decided to convert the iPhone photo library. When the process is started, it happens about 4% on the progress bar when a popup said that there is not enough disk space to perform the task (said to 72GO). How can I complete this process? She wants to ensure its iPhone and iPad Air can all share all the photos via iCloud. Can I put the library of Photos on the SD card too? Once the synchronization of library of Photos with iCloud, not all large digital images disappear from MacBook Air and only a miniature remain (like on the iPhone and the iPad)?

  I decided to try the procedure on my original post on my MacBook Pro.

  I copied the Library.photoslibrary Photos of my MBP to an external hard drive connected to my MBP.

  I did an "Option" + then click on 'Photos' selected the "Library.photoslibrary Photos" on my external hard drive. This produces the following pop-up message:

  "This library contains items to download from iCloud photo library".

  "To download the complete library, delete the incomplete elements, then set this library as the library of the system preferences and activate iCloud photo library. This will disable iCloud photo library on other libraries. »

  "Delete the incomplete items" or "quit".

  I clicked on "Quit" and posted above.

• Error recovery disc on the Satellite A200 - not enough of space

  After reformatting my laptop toshiba recovery disks will not reload windows because it says that I don't have enough space on my hard drive.

  The error message is the following:
  There is not enough space on S3A6134D502. You need extra 2.34 GB to copy these files.
  S3A6134D502
  Free space: 1.42 GB
  Total size: 1.46 GB

  It seems that he has created a new partition which allows to load windows on the partition being too small.

  Problem is that you have modified the standard settings for the recovery procedure.
  First partition on the disk HARD is called WinRE partition and this partition has a capacity of 1.5 GB.
  When you start the recovery procedure and simply click OK or NEXT all went well.

  I guess you have chosen configuration option and click on the second option to install the operating system on an existing partition.

  What you probably want to do is to install the OS on the C partition only in the second hope or all other partitions will not be deleted or formatted. Right?
  I tested several times on P200 and A200.

  It won't work then only option is to erase the whole HARD drive and before recovery installation starts all existing data and partitions will be deleted and formatted.
  So before you begin installation OS Backup all important data and install OS without changing anything.

• Cannot install XP service packs - not enough space error

  Hi, Gilchrist, I lost my XP Pro according to the headder. When I try and reinstall it from the original disk, XP pro installed. The problem is when I try and install SP2 or SP3 States screen that there is not enough hard disk space. He reads that 2012 mb instead of the 6.45 GB. All ideas now to overcome this obstacle.

  Best regards.

  * Title *.
  Problems reinstalling with XP pro after April 21 of McAfee update debachle. Inability to read 6.4 GB hard drive.

  Have you contacted McAfee Support help yet?

  The foregoing despite...

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Or start a new thread in this forum for further assistance: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• In said Fixit WUAUSERV won't start so check if enough privileges on a user's computer

  I'm trying to fix the many problems of updates do not install it after you have downloaded for > platform NET and Vista and other tips for running specific Fixit for this I get to the WUAUSERV could not start - check if you have enough privileges message, but it's my personal computer where is that a single administrator - me - now what that?

  Hello

  1 are. what Fixit you referring?

  2. what version of .net Frame work fails to install on the computer?

  3. What is the message exact error pull you when installing .net frame work?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 2 :

  Try to put your computer in a clean boot state, and then try to install the updates.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3: Manually try to install updates from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Method 4:
  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again.

  You must activate new security that you was disabled programs.
  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For your reference: http://support.Microsoft.com/kb/313222

  Hope this information is useful.

• Administrator gets an access denied, not enough user priivileges to run the utility in elevated mode.

  Administrator gets an access denied, not enough user priivileges to run the utility in elevated mode.  No high privilege invites provided.  Command is CONVERT F:/FS: NTFS.

  F: is a USB drive of 250 GB FAT32 mounted port.

  What is the solution for this issue.

  OS Vista Home Premium SP 1.

  http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  See if the methods above will help you.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation problem: (there is not enough free space to store the temporary files of Windows installation)

  I install Windows 7 Ultimate update on Vista Ultimate. Compatibility check says I can go for it.

  I have 348 GB of free space and 2.4 GB of Ram. I run Disk Cleanup and is are free programs on hard drive. When I run the installer, it gives me this message

  There is not enough free space to store the temporary files of Windows installation.

  I'd appreciate any help to overcome this problem.

  Tried the fix you suggested. He changed nothing

  You may be able to mark the partition on which is installed the operating system as being active.

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click system and Maintenance.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click the disks as storage management.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action.

  Could also contribute to:

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disable startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Also:

  You need more than half of your drive is empty instead upgrade. If your reader is 1.0 TB (1, 000 GB), you need 500 GB + to be free.

  If you cannot free enough space, you need to move data to external storage.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Installer corrupted Windows - not enough memory is available to process this command error prevents me to update.

  My installer of Windows probably corrupted, as it gives the "this installation package cannot be opened.  "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package" message during the installation of some programs.  I'm now using Windows 7, but the problem has been around for my Vista installation.  I am unable to do a clean install of the operating system that didn't record because I bought 7 through the Win741.com agreement.
  In addition, when I try to update Windows install, I get the message error "not enough memory is available to process this command."

  I tried several things, like the safe mode, the command msiexec \regserver (maybe wrongly?  "He wouldn't take it without space), and nothing works.  I guess I should add that I tried it works as an admin too, given that always gets mentioned - and probably should be.  Help?

  You are welcome to help.

  To exclude a problem with your user account can you try an another user account with administrator privileges (create one if nessary) and then try to install the applications of this account.

• ODI the Package execution fails with ODI-1228 and ORA-20000 not sufficient privileges to analyze

  Hello

  I am trying to execute the package to ODI to have this error:

  Header 1

  ODI-1228: GATHER_SCHEMA_STATS-DW_STAGE (procedure) task fails when connecting ORACLE target ORACLE_SERVER. Caused by: java.sql.SQLException: ORA-20000: not sufficient privileges to analyze an object in the schema ORA-06512: at "SYS." DBMS_STATS", line 24867 ORA-06512: at "SYS." DBMS_STATS", line 24945 ORA-06512: at "SYS." DBMS_STATS", line of 24899 ORA-06512: at line 2 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405) at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931) at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481) at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205) at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548) at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217) at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769) at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954) at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539) at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163) at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102) at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1) at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50) at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913) at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625) at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558) at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464) at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093) to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366) at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216) at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300) to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292) to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855) at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126) to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82) at java.lang.Thread.run(Thread.java:744)

  (1) DW_STAGE and DW_REPORT have "ANY ANALYSER" and "UNLIMITED TABLESPACE" privilege and roles "S/n", 'CONNECT' and 'RESOURCE '.

  (2) agents are all running

  (3) tested ORACLE_SERVER and he succeeded

  Need for emergency assistance.

  Thanks in advance-

  ADI

  OK, I solved it.

  As part of Oracle under Technologies--> Oracle in the Studio of the ODI, I gave in the uid and password for DW_STAGE and it fixed the problem!

  Thank you all for your help and suggestions!

  ADI-

• ORA-00947 not enough values, why?

  In this code, why do I get "ORA-00947 not enough of values, it has the same number of columns, just a select statement."
  
  Help, please.
  

  type list_employee_type is table of employee_tmp%rowtype;
  
   procedure search_by_jobId (jobId IN varchar2,  list_employee_rtn OUT list_employee_type,
          success OUT boolean, exception_msg OUT varchar2)
          is        
       begin    
         select * into list_employee_rtn from employee_tmp where job_id = jobId ;       
      end search_by_jobId;

  >
  still do not understand, can you please give me more details?
  >
  SQL does NOT include PL/SQL types. This is a PL/SQL type:

  type list_employee_type is table of employee_tmp%rowtype;
  

  You can use in SQL:

  select * into list_employee_rtn from employee_tmp where job_id = jobId 
  

  You must use a SQL type

  And the full exception you was probably one like this:
  >
  ORA-06550: line 7, column 22:
  PLS-00642: types of local collections not allowed in SQL queries
  ORA-06550: line 7, column 40:
  PL/SQL: ORA-00947: not enough values
  ORA-06550: line 7, column 8:
  PL/SQL: SQL statement ignored
  >
  PLS-00642 is the exception that said you that you used the wrong type.

  Here are the types SQL based on the SCOTT. EMP table

  -- type to match emp record
  create or replace type emp_scalar_type as object
    (EMPNO NUMBER(4) ,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     MGR NUMBER(4),
     HIREDATE DATE,
     SAL NUMBER(7, 2),
     COMM NUMBER(7, 2),
     DEPTNO NUMBER(2)
    )
    /
  
  -- table of emp records
  create or replace type emp_table_type as table of emp_scalar_type
    /
  

  Now you can use "emp_table_type" in a PL/SQL procedure, and in the select statement.

• iphone 5 c upwards - not enough memory error

  Plugging my iPhone 5 c to synchronize with iTunes on my desktop (you want to create a restore point) but I get an error message of not having enough free space on my computer - try to delete files and remove the trash.
  I did it, but he has not made a difference (trash is empty and iPhone has 11 GB of free space). I tried to reset the phone, turning the computer power switch & always occurs the same message.
  iPhone software 9.3.4 and iTunes is 12.3.2 - I know the new ios 10, which I don't want to download as we have very limited her download limit.
  Any suggestions?

  Hey there BonesKel,

  I understand that you have a problem with your ability to upgrade to iOS 10 because you cannot create a backup on your computer. Looks like you have enough free space on your iPhone, but you have not enough free space on the computer to allow a backup of your iPhone to reside there. I have a story for you that will help you to free disk space on your computer, allowing you to create a backup iOS through iTunes and continue the update process:
  

  OS X El Capitan: increase the disk space

  Don't forget that you can always use iCloud to keep a backup of your device iOS as well:

  iCloud: back up your device iOS to iCloud

  Thank you for coming to Apple Support communities and have a great day.