Not usable at nearly host Dreamweaver

Similar Questions

• Nearly host download difficulties

  Hello

  I am trying to download my site on nearly host

  Nearly need to go to Directory htdocs, Muse host does not seem to do this?
  
  Nearly just host called & said I'd need to transfer all the files manually, Inc. each time they move.

  It is a site for DJs in London with profile pages, regular adjustments to each page, it would be a nightmare.

  I need this sorting ASAP...
  

  Solution *.

  Leave the box empty folder!

  Snacks to leave this post here will be someone else gets the same thing.

• F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message.

  Out with the new v.31.1.0, the: 2 September 2014 version of Thunderbird, I can email is no longer a list of recipients, getting the error msg: F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message. In earlier versions, the addresses of individual e-mail in the list (F & G Committee in this case) are automatically placed in as the e-mail is sent. Is there a solution to this problem?

  Read this.
  https://support.Mozilla.org/en-us/questions/1019019

• What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• Why not save a file HOST Unicode or any other format beside ANSI format? Either way, which is Unicode format?

  Why not save a file HOST Unicode or any other format beside ANSI format? Either way, which is Unicode format?

  You would normally use unicode when you want to a text file that contains those outside of the normally the ASCII value... accentuated characters and others. They are rarely used in the definition of host names.

• Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

  Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?

  Hello

  You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

  If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

  Hope this helps and works.

  Chris

• LR is almost not usable in Windows 10

  Since the upgrade to Windows 10 (home edition Premium 64 bit i7 cpu, @ mem 920 2.67 GHz 15 g) LR (CC2015.2) became so slow, it is practically not usable.  I closed all virus protection software, and I can't go 10 minutes without the locking system to the top with the message "not responding".  I had Adobe Connect agents on my computer, and whenever they do something, such as reinstalling, copy catalogues etc, it's even worse.  Yesterday I updated again, and now, new import routine does not work as it did, can't zoom in on the files that are on the import of pre to screen and cannot re - import a file.  Any help or advice will be greatly appreciated.  Adobe staff have yet to solve this problem, the cat team.

  I have 10 windows and LR on a portable computer, which has also slowed.

  Here is the System Info:

  Version of Lightroom: CC 2015.2 [1044713]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.6 GHz

  Built-in memory: 10230,9 MB

  Real memory for Lightroom: 10230,9 MB

  Real memory used by Lightroom: 1172,7 MB (11.4%)

  Virtual memory used by Lightroom: 1127,9 MB

  Memory cache size: 1739,0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1080, 2) 1920 x 1080, 3) 1920 x 1200, 4) 900 x 1600

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  AMD Radeon HD 5570

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13399 context 15.200.1062.1004 the base profile

  Renderer: AMD Radeon HD 5570

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\admin\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\admin\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  2) export to Photomatix Pro

  (3) Facebook

  (4) Flickr

  (5) HDR Efex Pro 2

  (6) home Plugin Leica

  (7) Mylio

  (8) home Plugin Nikon

  (9) perfect B & & W 9

  (10) perfect effects 9

  (11) to enhance the perfect 9

  (12) perfect photo Suite 9

  (13) perfect Portrait 9

  (14) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 68D 9

  Subsystem: 55701545

  Revision: 0

  Video memory: 1010

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers / headphones (Realtek High Definition) Audio

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  Hi sfleditor,

  Greetings.

  • Try to update the graphics card drivers
    • AMD Catalyst 15.9.1 Beta Driver for Windows
  • Restart your computer and then check back the LR.

  Concerning

  Rohit

• I want to reinstall Dreamweaver CC not CC 2014 - I have an iMac in early 2008 that do not run 2014 CC - CC Dreamweaver download is not available

  I uninstalled Dreamweaver CC because of the Java Script problem after upgrade to Yosemite. I had read it was the best thing to do.  Now, I can not download the CC of Dreamweaver (not 2014).

  I have the CC version on my laptop.  Maybe there is a way to transfer from the laptop to the iMac?

  Otherwise, it must be possible to download Dreamweaver CC beginning, surely?

  Help would be appreciated.

  Hey, think I found the answer - CC filter, by previous versions and hey presto, you can install the first version of Dreamweaver CC

  This page has been useful

  Using creative cloud | Install, update, or uninstall applications

• The system logging is not configured on the "host"hostname"

  Hi all

  I just install the VMWARE ESXI, 5.0.0 on a hp DL380 G7 Server everything went well, but via Vsphere client, I summarized my host tab the WARNING «Laa system logging is not configured on the "host"hostname".»

  Pour installer I i info on card kind sd server a drive to keep pour VM

  anyone it an idea?

  Thanks in advance

  RRaph

  Hi RRaph,

  Look in this KB if you find no useful info:

  • http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2007658

  A +.

  Franck

• Do not click on in the VM and can not move files between hosts and virtual

  Do not click on in the VM and can not move files between hosts and virtual

  Home - Windows XP x 64 Edition

  Virtual - Windows 2003 Web Edition

  -vmware.log

  ...

  sept 23 14:10:17.875: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:17.875: mks | Adjusting size of 41 of the stack of the thread to 1048576.
  sept 23 14:10:17.890: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:21.718: vcpu-0 | Unified TOOLS loop capacity requested by 'box to tools-MDN; now sending via the TECO
  sept 23 14:10:21.718: vcpu-0 | GuestRpc: Channel 7, toolbox-MDN app reviews.
  sept 23 14:10:21.718: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:21.718: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:21.890: vcpu-0 | VMXVmdb_LoadRawConfig: Loading of raw configuration
  sept 23 14:10:22.000: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:22.000: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:23.750: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:30.703: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:30.718: mks | Adjusting size of 41 of the stack of the thread to 1048576.

  ...

  Any ideas?

  Thank you

  If your license key allows, update your VMware Workstation version 7.1.4

  Otherwise, at least upgrade your VMware Workstation to version 7.0.1

  In the menu bar, help-> Check for Updates on the Web.

• bought photoshop elements 11 year last for windows and use it in my office. The office is now crashed and not usable. So I bought iMac now. Is it possible to make the trade more to change the license in version iMac for a small fee. If not, can I partitio

  bought photoshop elements 11 year last for windows and use it in my office. The office is now crashed and not usable. So I bought iMac now. Is it possible to make the trade more to change the license in version iMac for a small fee. Otherwise, I can partition the hard drive in the iMac and install windows and also photoshop elements? What is the best alternative? Why?

  A license of Photoshop Elements is good for Mac and Windows, it should be just a matter of download the Mac version and using your serial number to activate it.

  PES 10: 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  If you have any problem with the activation contact Adobe support using cat... Start here  If after selecting the relevant answers, you are unable to find a solution, choose "still need help? Contact us. "and the contact Chat option.

• Additional virtual disk space not usable in Windows

  I resized a virtual disk of virtual machines by changing properties and then used a live CD partitioning tool to resize the partition.  Inside windows disk manager, it shows that the additional disk space as if the size of the Windows partition has been increased with success.  However, when I look at the properties of the hard drive in Windows, the extra size does NOT appear and it is not usable or accessible to the file system.  Any ideas what went wrong and how to fix it?

  Thank you

  I had exactly this before strange point of view and could not explain it. Seemed rather strange that the operating system will appear to display the disk space as allocted but the extra space was not available (even when checking the query WMI etc.)

  Ultimately, however, EXTPart has remedied the problem for me. (and quickly)

  If you do not use EXTPart, you can use the converter to recreate the disk.

• Could not connect to smtp host: &lt; ip &gt;, port: 25, response: 421

  Hello
  
  I'm under java program sends single e-mail thread on. He sends about 250 emails per minute.
  Emails sent with success, but after a few hours I still get email exception "could not connect to smtp host: < ip >, port: 25, response: 421.
  
  Once this happens he has stopped coming. I had to restart the application server for this one.
  
  I wonder why emails are sent in even if e-mail exception occurs?
  
  any help will be appreciated.
  
  Thank you

  I'm not close connection to the finally block.

  So close a finally block.

  I have an old version of mail.jar (1.3.1)

  Therefore use the current version.

• Lightroom 5 Spot Removal Tool lag and is not usable (Temp workaround?)

  Lightroom 5 Spot Removal Tool lag and is not usable.  The Spot removal tool is really quite critical to usability and workflow for Lightroom 5.  Check the other tools beside the Spot removal tool, it seems that the fix red eye tool is also affected.  It might have something to do with the Version of process?  I noticed when working with some old images (using the 2010 process Version) files, the Spot removal tool worked as previously experienced. Current images that have been "upgraded" in the new Version of process (2012) are now unable to use the place because of its response removal tool very laggy and sporadic.  I've never known a problem like this with Lightroom (LR since LR2 user).  Mac OSX 10.7.5, i7 to 3.4 GHz, 8 GB 1333 MHz DDR3

  I also noticed this reprocessing that an image can return to the removal tool again 'useful' Spot (back from 2012 to 2010, then return in 2012).  Does not always work and isn't always 'stick', such as closing and reopenling LR reinitiates usually lag Spot Removal Tool.

  I saw someone talking about the Version of process as a potential culprit, nor I have seen no reliable workaround solution.  An image (or a set of images) reprocessing at least works for me for a while, but it would be nice to not have continue reprocessing of images every time I open / use Lightroom 5.

  LR5 is great and all I need for most of my images.  Unfortunately for me, however, this ease of use also requires features without hindrance of the Spot removal tool.

  For some reason, it is clear that not everyone is experiencing such massive slow / bottleneck when it comes to the Spot removal tool.  If all users have experienced this problem at this level, they would have been calling for Adobe to address and remedy immediately.

  Respectfully, Sean, make a suggestion like that proves that you do not know / have not experienced this problem / don't understand gravity on which this issue may affect workflows; simply "turn off lens correction and noise reduction" is certainly not a fix.  If the 16 GB of RAM does not resolve the problem, you really think simply turning off the noise reduction will be?  And as Bert Nase pointed out, to make that large volumes of images increases workflow in a program designed to streamline the workflow for large volumes of images.

  1 - one solution is to change the version of process in your first picture (2003-2010), then copy - paste who develop the setting for the rest of your images.  This will get all your images at the point in your workflow where you can use the tool to delete Spot on each image.  After spotting, convert each image back to the current version of the process (2012) then re - perform tasks that conversion lost.

  2 - The presets is a workaround of options, but you will need at least two of them adapted to your stream of work.

  3. change your import settings to an earlier Version of the process is an option, and then complete Spot Removal on each photo, then update the process Version on one and copy/paste for the rest, then re - perform for each picture lost during conversion tasks and continue your workflow from there.

  Readers of this thread can use the link above, but it may present its own problems, too.  As mentioned, switching back-and-forth between Versions of process can remove some of your spots already corrected and you will need to re - correct.  Worse, a prompt window asking for the creation of a virtual copy or evidence will begin sometimes arise... closing the window, by clicking 'Cancel' or by choosing another option in the context menu didn't "remember" and the window opens upward with any other "click" on the image.  Lightroom should be stopped and the computer restarted before the question to reset.

  Yes, it's very frustrating and time consuming to say the least.  So, unfortunately there no solution yet to workaround.  I hope that this issue will be addressed and corrected in the next release of 5.2 (doubtful) or the Cloud of Photoshop + Lightroom version.

• I need help... Not a big user of Dreamweaver

  I hope that makes sense! Bear with me... I'm not a big user of Dreamweaver. I bought some custom icons of social media to put on my website in the footer. I thought I could possibly fall my way through the code in Dreamweaver and do it myself. Any help would be greatly appreciated! When I export the file in HTML format that I can paste it into my site, the links are there, but the images are not? Could someone perhaps explain to me what I am doing wrong? I even tried to load the images on my site and then paste the code, perhaps thinking that it was the road to go, but it ends with the icons, pictures there and then the table with points of mark/links below. Help! Maybe point me in the direction of a good tutorial? Thank you, thank you!

  Here is my site so that you can see what is happening: www.savvyshots.net

  Do you mean these icons?

  http://www.savvyshots.NET/photos/i-8F73vpQ/0/O/i-8F73vpQ.jpg

  They seem to be in the background.

  Nancy O.