notebook became slow as soon as I connected my laptop

Similar Questions

• Notebook became slow

  Hi all!

  I bought a laptop G6 - 1330sr. was pleased with the performance is good. It took a year and the laptop has been slow. Now running windows 7 is not possible. Wanted to reinstall the system, but too long is loaded word "Start Installation" i.e. hangs and nothing happens. And I can't bear to turn off the power the computer 30 minutes.

  I think it is a hard drive or processor heats up. But where I can check the temperature of the processor? In the BIOS-e is not found. But notice he is crowned the same as before.

  I'm sorry. It's my English. I have bad m speaks English.

  Hello

  I don't think you need to replace the hard drive as the error code and description of the problem are all compatible with a failed drive.

  Replace the hard drive yourself is a fairly simple and brief procedure is detailed below.

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 750 GB HARD drive if you want a little more space - readers at the following links are some examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  Best regards

  DP - K

• iPod Classic disconnection as soon as I connect it

  Hi all, I have an iPod Classic 160 GB. I recently changed my computer and I have encountered a few problems since. I could always do something, but this morning I wanted to sync my iPod, and as soon as I connect it, it disconnects without syncing. Sometimes iTunes displays a message on my iPod can be damaged, but I'm not sure what I can do about it...

  Thanks a lot for your help and your answers!

  Previously (before "this morning"), have you managed to connect the iPod and sync content with iTunes on this computer?  Currently, the iPod is still appear in iTunes when it is connected to log?

• Convenient pressure DXD digital transducer driver became slow with upgrade to 2010

  Hello Forum,

  I was using drivers of digital transducer of pressure DXD convenient with LabVIEW 2009 without any problem. Recently, I upgraded LabVIEW for 2010 and I noticed that data using the driver became slow and returns a warning "Dresser DXD default configuration is not supported". The warning code is 1073479936. I could not find this code in the shared folder in the installation folder of NOR. Do you know what could be the problem with the driver and how can I solve this problem.

  Many thanks in advance,

  Zaidi

  Hello forum,.

  I could solve the problem with the acquisition of data slow using a simple series VI of reading / writing.

  Thanks as always for the attention

  Zaidi

• My mouse freezes as soon as I connect a flash drive for my USB XP

  My mouse freezed up as soon as I connect the flash drive to my USB key.  I then get a message that says: "power surge on Hub Port, a USB device has exceeded the limits of its hub port power.  Help solve this problem click this message. "Which of course, I can't because the mouse is stuck to the top.  I then turn off the computer by the turn button and reboot.  It is then very well until I have plug the flash drive and then I get the same thing again.  I have several flashdrives and it does the same thing with each of them.  I tried to take to another computer and they worked very well.  I scanned the virus and they were clear.  I also scanned my computer for viruses and it was clear.  My mouse is not a USB mouse.  It's an old computer and caches at the back of the tower.  The only other USB device I have is my scanner and it works fine.  And I get the same thing, even when the scanner is disconnected.   I am confused because I can't save or retrieve information from my flashdrives.  My daughter says my windows is confused and thinks I have too many devices plugged in at the same time when I'm not.   I have Windows XP.   How can I solve this problem?

  My mouse freezed up as soon as I connect the flash drive to my USB key.  I then get a message that says: "power surge on Hub Port, a USB device has exceeded the limits of its hub port power.  Help solve this problem click this message. "Which of course, I can't because the mouse is stuck to the top.  I then turn off the computer by the turn button and reboot.  It is then very well until I have plug the flash drive and then I get the same thing again.  I have several flashdrives and it does the same thing with each of them.  I tried to take to another computer and they worked very well.  I scanned the virus and they were clear.  I also scanned my computer for viruses and it was clear.  My mouse is not a USB mouse.  It's an old computer and caches at the back of the tower.  The only other USB device I have is my scanner and it works fine.  And I get the same thing, even when the scanner is disconnected.   I am confused because I can't save or retrieve information from my flashdrives.  My daughter says my windows is confused and thinks I have too many devices plugged in at the same time when I'm not.   I have Windows XP.   How can I solve this problem?

  This is the result of not not more likely USB ports. You can try to update the drivers of usb device, but if the problem there is not a lot you can do otherwise than to buy an expansion usb card. You can disable usb error reports to stop seeing the error.

  http://support.Microsoft.com/kb/329632

  1. open Device Manager

  2 expand the Bus USB controllers section. Are looking for, then
  Double-click a host controller that has either the word "Universal" or
  'Open' in the title.

  3. in the Properties dialog box, click the Advanced tab, and then select the checkbox 'don't tell me about USB errors ".
  Note: If you deselect this option, all other USB error messages will also die.

• Windows vista basic when I turn it on is to try to do a startup repair but can't, I can not connect my laptop

  ORIGINAL TITLE: Need help with this 1, you can

  I have a dell inspiron 1520 windows vista basic when I turn it on it is

  trying to do a startup repair but can't so I can't connect my laptop or anything

  with it so please can someone help me

  Hello

  Try to press F12 on startup and run the Dell, diagnostic tests.

  "How to run Dell 32-bit Diagnostics utility"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  And here is the link to the Dell Forums; they may not know this error code:

  http://en.community.Dell.com/support-forums/default.aspx

  And here are the methods, if necessary, to reinstall Vista on a Dell computer.

  Since the recovery Partition;

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And if provided by Dell discs recovery.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  See you soon.

• HDX 16, trying to connect wireless laptop to LG SMART TV?

  I have my HP HDX 16 laptop and I also have a LG SMART TV that I just bought last Christmas. Is there a way to connect my laptop via a WiFi connection with the TV or something? My laptop runs on Windows 7, 64-bit operating system. My LG TV I notice a intel (R) setting WiDi but this laptop does not have it. Well not that I can find here. Can someone help me please I really would appreciate the help. Thank you HP

  Hello

  Research in the WiDi Notebook does not seem to be supported by this processor. To connect to your TV, you must use a cable or find an adapter that lets you use the WiDi. I have no idea what or where to find those.

  Thanks for your reply.

• Trying to connect my laptop to an HDTV using an HDMI cable. Error I get is "signal".

  I use window Vista on my laptop. I'm trying to connect my laptop to my HDTV. I connected the two with a HDMI cable. The error I get on the TV screen is 'signal '. Is there some settings that need to be changed?

  All imput would be appreciated.

  Kite_99

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Help! I cannot connect my laptop to my tv via a vga cable.

  I have a VGA cable that I used for a while now, to connect my laptop to a TV for use as a moniter... I never had no problem that until recently.  Now, the screen appears on the TV screen only when the laptop is starting up, but as soon as the program windows load and gets the TV turns off screen to the password screen.  However when I start the computer by using 'safe mode' I have no problem at all either... and to make things worse and more complicated the screen for my laptop is broken so I can't use it all.  Please help me with any suggestions as to what I might be able to make :(

  I have a VGA cable that I used for a while now, to connect my laptop to a TV for use as a moniter... I never had no problem that until recently.  Now, the screen appears on the TV screen only when the laptop is starting up, but as soon as the program windows load and gets the TV turns off screen to the password screen.  However when I start the computer by using 'safe mode' I have no problem at all either... and to make things worse and more complicated the screen for my laptop is broken so I can't use it all.  Please help me with any suggestions as to what I might be able to make :(

  =====================================
  I don't have a specific answer to your question, but I have recently
  had a similar problem with a connection "svideo to RCA cable.
  and the solution was to change the computer of
  resolution of the screen to a lower number. Also... I had to open
  nVidia control panel and select Clone. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• 39L4333DG will not connect to laptop WiDi - timeout

  I'm tempted to try to get the WiDi to work.
  First of all: TV is updated to the latest version via autoupdate.
  Laptop is 2nd generation than i7 2675 WiDi compatible with all the latest drivers.

  I can detect the TV, I can try to connect. Laptop request PIN, the PIN is displayed on the TV.
  TV says then connects, so it is portable. After a while (like 30 seconds) the TV said that there was a timeout. Laptop keeps trying to connect for a few seconds more and that's it.

  Any idea what the problem might be?

  > Laptop is 2nd generation than i7 2675 WiDi compatible with all the latest drivers.

  First, please check if computer laptop supports WLan Intel WiDi appropriate card.
  Where it is, you must update the Intel WiDi software.

  Here, on this page from Intel, you will find the required software from Intel:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031109.htm

  You must update: Intel®, Intel® Wireless Driver driver.
  Need to install the latest version of the software Intel WiDi and other Intel WiDi Widget

  I hope this helps!

• Equium A100-147: can I connect my laptop to my desktop hard drive?

  My computer laptop satellite has a permanent error when I turn it on: "autochk program not found - skipping autocheck.

  I've tried everything I can think (and advice of you internet) to get the data on my laptop hard drive, including the creation of a boot disk (using an external floppy drive) and a knoppix disk and nothing worked.

  Now, I suppose that if I can connect the hard drive laptop on my desk, I can get the data in this way? But how can I do?

  I bought an IDE 3.5 "to 2.5" adapter disk hard drive, but the instructions indicate that laptop hard drive must have a male connector 44? The hard drive is a Toshiba MK6034GSX and when I removed it I couldn't see 44 pine?

  Any help would be greatly appreciated.

  Thank you

  Yes you can do it, but you need USB 2.0 2.5 hard drive enclosure Kit ".
  Make sure that you buy a box with the right interface. Your HARD drive is SATA HDD.

  If you can connect the laptop HDD s to every desktop or laptop as external HARD drive and you will have access to all stored data.

• How to connect my laptop seconded to the display of lightning?

  How to connect my laptop spare Windows PC to the display of lightning?

  It doesn't seem likely... this thread explains a little bit problems > http://apple.stackexchange.com/questions/181277/connect-a-thunderbolt-display-to-windows-8-Bureau

• IAM trying to connect my laptop to my TV using a cable video. s, but I can't do now.i once before, but I think that I went somewhere and cloned it .anybody me help please jack

  trying to connect my laptop to my TV can't do it now, I did it once before, but I think that I went somrwhere and cloned it .can sume one help me pleas jack.      E-mail address is removed from the privacy * if we're cut off

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  It will be useful.

• connect my laptop to my tv with HDMI.

  Im tring to connect my laptop to my sony bravia TV with a hdmi cableand I have this error: unsupported signal. Please check the output of the device.

  I plugged the laptop in the other lcd TV and have no problem, I just plug the hdmi cable and select the correct output and my screen is replicated on the TV. is there something you need to do for sony model? IV tried changing the outputs and other things but have no luck. ??

  I think you would be better served if you posted on a forum of Sony TV or looked at the web site of Sony.

• Connect a laptop running Windows XP to a LCD via HDMI

  Hello

  I did a fresh install of windows XP SP3 on my Sony Vaio Z series. I bought a HDMI cable to connect my laptop to an LCD (DYNEX 32 '') so that I could watch movies and so. Unfortunately, the LCD doesn't detect any signal from my laptop. Is there a solution for this problem... I have to install some driver or what?

  Please advice...

  Hello, mykhtarz

  Since you have made a new installation, it is likely, that you do not have the required driver installed software to automatically switch to the HDMI. I recommend first check with the manufacturer for updated driver software.

  There may also be a combination of keys on the laptop to change HDMI manually, usually a combination of # FN + F. You'll need to refer to the documentation of your laptop for which key can control the HDMI.

  You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

  1. Click Startand then click Control Panel.
  2. Click appearance and themes, and then click display.
  3. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.
  4. Click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

  For more information, see the following link: How to configure and use multiple monitors in Windows XP:http://support.microsoft.com/kb/307873

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.