Nothing but the blue sky and green fields!

Similar Questions

• Windows 7 - partition windows on a new drive... travel startup gives nothing but the black screen and blinking cursor

  I am replacing a hard drive and move a partition Windows 7 from one disk to another.  The original partition of Windows 7 starts and works perfectly, but when I clone to the new drive, I have a terrible problem getting the new boot drive.

  On the original drive, the partition is the partition 3, on the new disk partition is partition 2.

  Both drives have the same size of cylinder.

  The new partition was created as a partition main with the same dimensions as the other and cloned in the whole content of the partition.  The files are all there in the new partition.

  He is currently not starting correctly, it starts the partition, but then he's here - I don't see Windows Welcome screen or anything - just immediately inadmissible black screen with a blinking cursor.  All I can do is reboot.  By pressing F8 at startup does nothing.

  Start of support for windows 7 and running repair features discovered the new partition as C: and CHKDSK C: points and gives a good report of the partition.

  BIOS settings have been lacking.

  The following commands were executed the repair windows 7 installation media feature:

  Of http://technet.microsoft.com/en-us/library/cc749177 (v = ws.10) .aspx

  BOOTSECT/NT60 C:

  And http://support2.microsoft.com/kb/927392

  BOOTREC /FIXMBR

  BOOTREC /FIXBOOT

  C:
  BOOT CD
  BCD ATTRIB S H R
  REN C:\BOOT\BCD BCD. OLD
  BOOTREC /REBUILDBCD

  The new partition was made active and is the only asset.

  If I erase and freshly installed Windows 7 on the partition, it does not start successfully, but if I then replace the contents of the partition with a clone of the other partition of work, it does not work.

  So that leaves me with a pretty good confidence that the problem has nothing to do with the charger starting and everything related to the content of the partition itself.

  I can't find more useful information for the boot partition.

  Any ideas?

  Moving Windows is not the best method.

  It is better to 'image' or 'clone' Windows to the new drive, using software such as Acronis

  True Imageor AOEMI Partition Wizard (free). I've used both (has a free version of Western Digital

  Acronis to use if you have WD hard drives).

  .Acronis.com/en-au/Personal/PC-Backup

  .disk-partition.com/Free-Partition-Manager

  (EDIT: I need to be careful.) Had redundant stuff here...;). )

  Dual-boot can be difficult in the best of times, but two partitions on a HARD drive...

  I don't think that you can select a particular partition in the BIOS to be your first boot option, only

  from the HARD disk, so it would be a blow to the top.

  See if there's useful information below-

  .sevenforum-Restore-Windows-7-Master-Boot-Recor

• Help..! I got the blue screen and other issues, do not know what to do...

  Signature of the problem:
  Problem event name: BlueScreen
  Please help me, I got the blue screen and this message today while I was trying to solve a problem with the backup of my pc...
  Don't know what to put here, if you need more make me know... Thank you

  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini030513-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-59483-0.SysData.XML
  C:\Users\Andy\AppData\Local\Temp\WERF871.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Thanks for posting the question in the Microsoft Community!

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Note: When you format a disk, all data that it would disappear.

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. See the link for the steps on how to download Sky-Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  The location of the dump file is C:\Windows\Minidump\.

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.

• I want to send a gift to a friend, but the system refused and asked me to contact support. Why can't I make a gift to him?

  Today, I send a gift to a friend with $ 25 and I tried to send another 100 dollars but the system refused and asked me as a result of the support

  If you try to pay with a credit of the iTunes Store, you can't. If not, click here and ask.

  (143307)

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• Hi, I wanted to know if you can fix the apple screen clock. the clock works perfectly, but the glass broke and how mach

  Hi, I wanted to know if you can fix the apple screen clock. the clock works perfectly, but the glass broke and how much

  Hi Maxi

  Costs vary depending on your location and the model Apple Watch.

  Contact Apple support to establish your repair options, cost and likely delays:

  http://www.Apple.com/br/support/watch/contact/

• I lost the small arrow returns you to the previous page online.  It should be under the red, yellow and green buttons.

  I lost the small "arrow" normally under the red, yellow and green buttons at the top left of the pages online.  Obviously, it's very frustrating because for this it is necessary to close and restart or just remember to right click and request a new window or a new tab.

  I'm working on an iMac of office.  Bought 2010.

  Thanks for any advice.

  Assuming that you are referring to Safari. Control by clicking in the title bar, choose "Customize toolbar...". ", drag the rear icons in the title bar.

• I connect to Windows Messenger, but "the email address and the password is incorrect." Please try again"I have already reset my password but still can't connect.

  Windows Messenger connection problem

  I connect to Windows Messenger, but "the email address and the password is incorrect." Please try again"I have already reset my password but still can't connect. Can someone help me?

  Hello my. CatherineMorit,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I left my computer, but the lid down, and when I came back, my screen properties were screwed to the top

  My computer was working fine. Then I went somewhere, but I left my laptop, but the lid closed, and when I came back, the properties of the screen are all seeds. The wallpaper was very large, and any Web site I try to open is also very important.

  Hello

  Try rebooting to see if that helps.

  Use the system restore to a point before that happened.

  Start - Control Panel - restore and backup center - upper left repair Windows

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  --------------------------------------------

  Also, check to see if they apply:

  Right click on desktop - customize - display settings - Set resolution.

  Right click on desktop - customize - top left adjust font size (DPI)

  CTRL + mouse wheel works ZOOM

  CTRL + and CTRL - work ZOOM in and out

  Your mouse/touchpad probably incorporates a ZOOM to it.

  Your system also has a magnifier built in which could be a problem - it can be as often
  programmed to work on the mouse/keyboards.

  How to turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  To see if your mouse/touchpad is set to ZOOM or enlarge use Control Panel - mouse.

  The TouchPad (if you have one) probably also has Hotkey controls so check with the system manufacturer
  Support, online documentation and their forums, where appropriate.

  ==================================================

  Are you logged on as ADMINISTRATOR?

  Right click on desktop - customize - top left adjust font size (DPI)

  How to change the font size in Windows Vista
  http://www.vista4beginners.com/how-to-change-font-size

  ============================

  Start - type in the search-> REGEDIT search at the top of list - click box right on - RUN AS ADMIN

  HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics

  In the right pane, change AppliedDPI (double-click on it) of 78 who is from 120 to 60, which is (96)

  I hope this helps.

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• How can I get rid of the blue name and the date that is entered under the signature

  How can I get rid of the blue name and the date that is entered under the signature

  Yes! you see Configure text where you can uncheck date Logo etc...

  For more information, see image

  

• I just downloaded CC but the two PS and Lightroom will not open when I click on open. using Windows 7 any ideas

  I just downloaded CC but the two PS and Lightroom will not open when I click on open. using Windows 7 any ideas

  Please contact support:

  Contact the customer service

  Concerning

  Megha Rawat

• The been lots of updates, but the effects, transitions and the text tool are the same. Why?

  The been lots of updates, but the effects, transitions and the text tool are the same and in some cases, we lost a few of them. Add more damage upgrade

  a couple of things that are not relevant. And promise a quick editing and improved timeline and more, but the program still crash and work almost the same thing.

  While welcoming the technical team, it will be useful to improve the effects and titration module too

  Hi Bisa Goma,.

  While welcoming the technical team, it will be useful to improve the effects and titration module too

  You can create a feature here: http://adobe.ly/feature_request

  Thank you

  Kevin

• In fact, I have problem in adding music to be played across all folios, the problem happened when I simply lock the ipad and open it, the publication is always open and I can browse, but the music stops and cann't continue. How can I solve this t

  In fact, I have problem in adding music to be played across all folios, the problem happened when I simply lock the ipad and open it, the publication is always open and I can browse, but the music stops and cann't continue. How can I solve this problem to continue after the opening of the ipad and continue to navigate the digital publication.

  The background sound plays only if the application is open. Once the device is locked or the user switches to another application the audio will stop.

• I'll have to recharge my system in full, out of nothing, but the F2 to work with installation. Everything is gone, and my original disks were damaged.

  I downloaded all the drivers from the manufacturer, then Microsoft / Windows I downloaded a Windows 2008 / Vista 2 or NT 6, what they said was the same background, but a little better. AFTER loading the drivers, I can't the system to start windows and the OS disks. I tried all the options with no luck. Should I added as System 32 system files or anything else. I thought that the drivers of the computer windows and the os downloads would be everything that I need. I need help, if someone can help me set up my computer so I can do my classes that I take online tonight and I was using my friends computer all day by train to get up and running. Thanks for any help you can give!

  I don't have a product key for the operating system when I downloaded it with instructions on loading files that I have my product key of the original system vista, but I did not have for the new OS, I downloaded. He's not missing much asks me to enter the key, it loads with a light blue screen for a long time then it pops up on the screen coming out of windows and that is as far as possible. Help, please! Thank you

  Hi BrendaDavidson48,
  Try this procedure:
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
  Eddie B.