Now 1022RW groans Jet when starting or laser printing

Similar Questions

• C310 printed fine when first installed the printer... now I can't print

  I have the new C310 series printer. The installer went well. Print test page, word document and a photo... all great.  Now, a week later, when I try to print what it's that sounds as if it was printing (I hear cartridge move, sounds normal 'printer') but leaves out blank. It is the new printer, new brand of ink cartridges, etc..  Any suggestions? Thank you

  This can help:

  Install a firmware update

  Looking for a firmware update that could help solve the problem:

  1. On the product control panel, tap the Setup icon ().
  2. Support on the Web .
  3. Tap the updates .
  4. Touch of the product updates .
  5. Tap Yes to update. The update can take 10 to 20 minutes. Do not turn off the printer until the update is completed. The printer will stop and automatically start up.

  This procedure comes from this document:

  Troubleshooting print quality problems

• How to upgrade to Windows 7 and the computer freezes when I go to print

  original title: several questions in fact

  I have 2 questions

  (1) my son bought a Sony NS Series Notebook for me. It came with a promise that I could upgrade to Windows 7. He tried to update several times and it didn't work. I know little about computers and so I accepted his answer that the Vista operating system is also good. Now I feel all sorts of problems and I told me time and again that it would be better to have windows 7. Any who tried to get the manufacturer to update after the date specified in them?

  (2) my son helped connect me to 2 different printers depending on what I need to print. Now, the computer crashes when I go to print. Any advice?

  Thank you in advance.
  Krystyna

  (1) depending on your laptop model and the day when you pruchase, you might be able to take advantage of Windows 7 update, for more information I suggest the Sony site for Windows 7 upgrade:

  http://eSupport.Sony.com/us/Perl/os7upgrade.pl

  Or you can contact the Sony customer for more details

  (2) for printer, the issue can be due to configuration or other reasons, I suggest to update your Windows and make sure printer drivers installed and also try to run:

  http://support.Microsoft.com/mats/printing_problems/

• When I give a print, only blank page comes my printer is HP Laser Jet P1102

  When I give a print, only blank page comes my printer is HP Laser Jet P1102

  Hi aremps,

  1 did you changes to the computer before the show?
  2. what operating system you have installed in the computer?

  This problem can occur because the print settings cartridge. Check your ink cartridges to see if you are out of ink. Refer to the printer manual for settings and troubleshooting.

  Please select the operating system and follow the instructions to solve the problem:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&DLC=en&LC=en

  Please report if you are still having the problem. I will be happy to provide you with additional options.

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• Laser Jet Pro 200 M251nw color: print job stuck in the queue

  I have problems with my color Laser Jet Pro 200 M251nw. I can print a MS word document and the printer works fine. When I try to print a second document MS word, that work remains stuck in the tail (spooling). I can't remove it from the queue. If I restart the computer, it went from the queue. If I print another document the process starts again. I know the procedure to remove a document from the queue but what I need to know is how to prevent them from getting stuck.

  Hello

  Please try the solutions in this doc.

• help with tabs, I've reset but does not solve problem when started

  When started the new tab is blank and does not show the previous 9 pages as before. I went to help troubleshooting and then reset Firefox. It works until I closed Firefox well when I start a new session new tabs are white again.
  Help, please.

  The icon of the grid 3 x 3 is on the page of the tab itself (screen attached). Simply, that shows and hides the thumbnails. In fact, I now empty placeholders. It erases the images?

  Anyway, if you have the about: newtab about: config, but you do not have the subject: newtab page when you press Ctrl + t, the problem is usually an extension. You can review what you have and configure or disable here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

• Satellite L655-1john says error "the path network not found" when starting

  I just bought the laptop above and I did all the stuff he wanted to start and now when it is in the login screen and I go to my user and press ok while I connect it gives me the above message "the network path was not found"

  I have windows 7.
  Does anyone know what I'll do?

  I m confused now.
  After the first start, you must create new account and then you can start Windows 7 preinstalled and use the preinstalled operating system. I can't even imagine that this problem occurs the first commissioning. Recovery images are tested and you can install it 100 times and it should not happen.

  Have you done some changes or anything that might be responsible for this?
  Can get you into SafeMode (F8), create a new account and try to connect with this new account? The same thing happens again?

• How to fix error 0x8007000E DX when start webcam on Skype

  When starting a webcam Skype call or check the video settings in tools/options in Skype, the DX error 0x8007000E error message appears and prevents normal video on Skype, even if sound/audio function still seems to work ok.

  Previously, had no problems, but this started after using a cell phone program Skype on another remote computer sometime before from Skype on my desktop home normal when the error appeared. The portable Skype program worked well both on another remote computer

  The webcam is built into my ASUS VK222H LCD monitor after trying to install a driver updated for the webcam, a different error message in the BACK said that this cannot be done and now the webvam does not at all.

  I am pleased to inform you that this problem seems to be fixed.

  I followed the advice of the ASUS support forum and just reinstalled the webcam USB then restarted and both Skype and webcam now seem to work normally.

• I recently installed PowerDesk Pro v7.0.1.3 and now, the system hangs when you right click to copy a folder, etc.

  Original title: Windows Explorer has stopped working

  My computer is running XP Home Edition Sp3 and using Norton internet security 2011. I recently installed PowerDesk Pro v7.0.1.3and now, the system crashes when you right-click to copy a folder, etc. I read on this forum of a person having a similair problem and being referred to this site offering a patch that seems to not be available:

  http://KB.avanquestusa.com/Al/12/1/article.aspx?Aid=4030&Tab=Search&BT=4&r=

  Marilyn answers Support Engineer Microsoft's answer also suggested maybe using some registry changes, which I'm not comfortable with because of my limited experience.

  Any suggestion would be greatly appreciated pedro147

  None of these suggestions to the Microsoft support technician will help you, but they will consume large amounts of your time.

  Please post a link to this Marilyn Microsoft engineer answer Support responses involving some registry maybe going to I can see that too.

  Older versions of PowerDesk Pro 7.x are known to cause explore crash, so that the sounds on the right.

  The current version of PowerDesk Pro is 8.5.

  You might be able to get the old version to behave by disabling PowerDesk one shell extensions at a time until when you right-click Explorer no longer crashes.  This will leave you with limited functionality of PowerDesk since those afflicted extensions will be disabled, but you should not have these extensions to do anything, you need to make sheets.

  I would start with the PowerDesk ZIP shell extension (I already know about this one).

  It is a version shortened and changed my notes on the use of ShellExView (since you already think sheets):

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

  For example, you could Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  Right click and disable Microsoft no suspicious extensions one at a time take a list so you can enable them again later if you wish.

  The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know which extension is the culprit, then you can start to enable them one by one until the Explorer fails again.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.  You can then start to reactivate other extensions to zero on the extensions that are causing your accident

  If the cause of the accident is a third party application or program, their may be a later version of the program available that solves the problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• I get a pop gray box that has the title of legend. Also get a box when starting with the title: c:\ C:\Progra~1\muclie~1\muclie~1

  Original title: Malware or virus? How can I remove?

  I have a virus. I get a gray pop box in the center of my screen with the title of legend, with an OK box in the middle. When starting my computer, I also get a box with the title c:\ C:\Progra~1\muclie~1\muclie~1

  I tried to remove malrare, malware removal, spyware removal, nothing worked. Anyone have any ideas?

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. open Add/Remove Programs and make sure that Show updates at the top is checked (and leave it checked); then select the name in the box sort by on the right. Now do scroll down & tell me if ALL the other updates following up-to-date are listed?

  (a) KB2676562, KB2659262, KB2686509, KB2695,962 , & KB2718704;

  (b) KB2675157, KB2653956 & KB2621440;

  (c) KB2661637, KB2598479, KB2631813 & KB2585542;

  (d) KB2633171, KB2393802 and especially KB971029

  Most will appear as Windows XP security update , followed by the number in brackets.

  If IE8 is installed, two 2 will appear as a security for Windows Internet Explorer 8 update , followed by the number in brackets.

  5. is Firefox, Chrome or any other alternative browser installed?

  6. what version of Java is installed?  TEST HERE in USING IE (only!)-online http://java.com/en/download/installed.jsp

  7. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; CCleaner)?

  8 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

• iTunes appears in the taskbar for 5 seconds when starting upwards

  iTunes makes its appearance in the taskbar when starting this past 2 weeks now, also the image of the desktop appears and then disappears leaving a blue screen with icons showing only. Running Windows XP

  Best regards, Michael

  Good day to you Jacques, thank you very much for your help.

  I deleted the old account (corrupt) via the new account, control panel > user accounts is the normal way to delete an account, but maybe not with an account that is damaged? This account has not entirely removed, I guess there's about 34 GB hard disk!

  I was then looking for another way to remove the remains via my computer > properties > Advanced tab > user profiles click settings, this also not failed to remove the remaining files.

  I had a look at your mode of deleting an account; In my version of Windows XP after system tools > there is no local users and groups to see what has been so far I could go. What makes an operating system recovery (reinstall the Windows XP operating system) is called for as the only way forward, this issue goes into a new question/answer see http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/error-signature-bccode-1000008e-bcp-c0000005-bcp2/2ce5c688-927f-4c00-be83-562ad75e6b82

  The answer

  I was slow to identify this problem; the installation was corrupted. The iTunes updated in November and it was when he started and created a big problem. I realize now more important to uninstall iTunes and QuickTime as soon as it is noticed.

  iTunes gives assistance with uninstalling, they fail will add or remove to remove, this is the link of web http://support.apple.com/kb/HT1925#1 you will probably need help deleting the non movable files use the following links.

  The first http://www.ehow.com/how_8526319_delete-locked-dll.html site that led you to the second site http://www.gibinsoft.net/gipoutils/fileutil/index.htm that you need to leave this window open until the installation is complete, then it works fine.

  Use GiPo@MoveOnBoot to plan a DLL file for the next time that you start your computer to ensure that the software deletes the file before deleting. The GiPo@MoveOnBoot utility is included in the defined GiPo@FileUtilities that allows you advanced operations of the system, such as installation disc and read the error checking.

  Set a system restore point and use the registry cleaner to remove iTunes and quick time etc. Leverage research as well find and remove these obsolete entries, make sure you delete the entries for other programs and My Documents or Favorites can use the tools new in C Cleaner registry cleaner will allow you to remove the entry from QuickTime remaining via Add / Remove.

  When you are done I suggest run Disk Cleanup, and then Disk Defragmenter open via accessories command prompt and enter sfc /scanonce press the Enter key, it should say that after the next startup it will start checking files.
  It scans all protected system files and replaces incorrect versions with versions appropriate Microsoft see the following link;

  http://www.TomsHardware.co.UK/Forum/59402-35-scannow%20

  You may need to verify these points by searching on the web to confirm these actions. I'm still not aware how know when reinstall iTunes installation is good, so for now I have not reinstalled it.

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I recently C clean the computer and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?

  I recently C clean the computer (Vista) and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?

  Thank you

  Hello

  (1) are you facing problems with your computer?
  (2) when exactly the error message is invited?
  I recommend you perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  You can also run the Microsoft Safety Scanner to make sure that your computer is virus-free.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  I hope this helps!