NTVDM. EXE has stopped working

Similar Questions

• -Pop-up message each time I log in that says: "ntvdm.exe has stopped working and it will be stopped."

  Greetings, West this pop up message annoyng which continues to appear a little each time, even if after I start my computer. It is said "ntvdm.exe has stopped working and he will be shut down", I close the window and aparently everything works OK. But it continues to if at all times, is there any problem? Why does this happen? Can it be fixed and how?

  My computer has an Intel Core Duo 2 CPU E6550 2.33 GHz, with 2 GB of RAM and my OS is windows vista business SP1 32-bit.

  Thanks for any help,

  Pedro Borba

  original title: ntvdm.exe stop working and will stop

  SALAM... I SAW UR QUESTION... HOWEVER, I KNEW THAT U HAVE PROBLEM WITH UR PROCESSOR FAN... PLEASE CLEAN IT WITH WIND TUNNEL YOU CAN FIND IN THE MARKET... AND BIOS PLEASE INCREASE THE TOLERANCE OF UR CPU TEMPERATURE... MY BEING of VALUE to 50 AND UR PROCESSOR IS HEATING BETWEEN 45 AND 55 degrees. TRY IT INSHALLAH IT WILL WORK... HOPE SOLVE UR PROBLEM...

  MOHAMMAD TOUSIF

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Previously, the programme of work gets error-NTVDM.exe has stopped working.

  Original title: I program I ran without error before, but now when I try to open it says systems NTVDM.exe "stopped working" and then closes the program. I have all the updates that are installed. How can I fix it?

  The program I am running has been provided by the National Fire Protection Association and I've been running it on this machine for the past two years with no problems

  The program I am running has been provided by the National Fire Protection Association and I've been running it on this machine for the past two years with no problems

  Suggestions:

  1.) closed try that program and reboot again.
  As I understand it, NTVDM.exe stops because a statement, it cannot pass the operating system.

  2.) right click the program > properties > compatibility > run this program as administrator > OK

  t-4-2

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• HPSF.exe has stopped working

  When I try to open HP Support Assistant, I get an error message that hpsf.exe has stopped working. Application has encountered a problem and needs to close. My warranty expired on 12/09/2012. HP Support Assistant disappears when the warranty expires. If this isn't what someone has an idea how I can fix?

  Hello

  It's nothing to do with your warranty ending, however this can be a fickle piece of software.

  Try the following.

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• TosIPCSrv.exe has stopped working on Satellite A300

  When I start my computer... (Vista) I have Toshiba Satellite A300
  I get a warning said: TosIPCSrv.exe has stopped working

  What it means? How should I do?

  Hello

  Seems the TosIPCSrv.exe belongs to the Toshiba S.M.A.R.T. Log Service.
  This can be found in:

  C:\Program files\toshiba\smartlogservice\tosipcsrv.exe.

  I'm not very well what is this process, but you could it enable or disable it in m
  MSCONFIG (type this in the window RUN) and check the startup and Services tabs.
  You need to find tosipcsrv.exe

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

  Hello

  I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

  After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

  I tried to uninstall the manually, but I got the same message.

  These programs are;
  Setup driver Atheros
  Toshiba hardware configuration
  Toshiba supervisor password
  Realtek High Definition Audio Driver

  So I can't go ahead with the upgrade.

  Anyone know what could be the problem?

  Thanks in advance,

  Pouvez - TR
  .

  Hello

  Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

  Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

  If you did a recovery facility before the upgrade?

  Welcome them

• Satellite A300 webcam problem - CEC_MAIN.exe has stopped working

  Hello

  I have problem when I open my webcam Ii see this message:
  + Cec_main.exe has stopped working.

  http://www.assayyarat.com/MyImages/Sep08/bloool_Untitled.jpg

  Can someone help me?

  I m wondering how someone can help you if you n t post something on your laptop and installed OS?

  Just for the note; Have you tried to reinstall the webcam software?
  Maybe you should try this instead of waiting and waiting and waiting

• ATKEX_cmd.exe has stopped working

  

  

  Hi all

  I'm struggling with this problem ATEX for awhile now and still not found a solution myself.

  I hope someone knows the answer to solve.

  whenever I have start my pc I get the same error "ATKEX_cmd.exe has stopped working" around 5 times in a row!

  You can see a printscreen of it added to this post!

  I had personally never heard of ATEX so much, I searched on the web

  and did not even find why I need exactly.

  In any case, I came to know that it is in a part of my registry so it's like all the other parties 'binary codes.

  and it would probably be affected by malware because I never changed anything in my regedit on this pc so far.

  So I did a SFC scan and I did a few malware scans and scanned and fixed my registry with some of the best free products (like ccleaner and so on)

  There is no malware detected and the registry got some repairs (as always) and some of the binary codes that had to be quarantined or deleted had to do with ATKEX!

  but the same problem still occurring...

  I'm not able to find the ATKEX_cmd.exe but I found the folder named 1.01.02 under "C:\Program Files (x86)\ASUS\AXSP\1.01.02' witch contains 3 files named:"ATKEX.dll","atkexComSvc"and"PEbiosinterface32.dll"so as you can see the DLL is still on my pc)"

  You can also see the printscreen of it in my post

  I also ran into problems when I tried to update the BIOS of my motherboard asus maximus vii ranger, because apperently I need to rename the cap file before updating, I feel that this could be the cause, but I'm not sure what I should do now

  I'd appreciate if someone could help me!

  Thank you very much!

  Maxim

  Hello

  It seems to be linked to the Realtek drivers - are you game?

  http://Rog.ASUS.com/Forum/showthread.php?47776-problem-with-Realtek-HD-Manager-load

  http://Rog.ASUS.com/Forum/showthread.php?48938-Mei-drivers

  Edit:

  ASUS computer

  atkexcomsvc.exe runs as a service in Windows (asComSvc) from the bottom. This service runs under the SYSTEM account with extensive privileges on the local computer and acts as the computer on the network.

  http://www.boostbyreason.com/resource-SHA1-561eedde165abd24e6d170799332b78c162c19d5-atkexcomsvc-exe.aspx

  It is loaded by atkexcomsvc.exe on Asus computers

• UPDATE ~ 1.EXE has stopped working

  Thanks for any help on this;

  The error "UPDATE ~ 1.EXE has stopped working" arises for only 1 user on a server terminal server 2008 Enterprise 32-bit Edition. About 80 users connect to 4 servers on a cluster and present a single user is the lone wolf who gets the error message. He says it appears all about 30 minutes. I literally have no idea where to start.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: UPDATE ~ 1.EXE

  Application version: 0.0.0.0

  Application timestamp: 2a425e19

  Fault Module name: KERNELBASE.dll

  Fault Module Version: 6.1.7600.16385

  Timestamp of Module error: 4a5bdbdf

  Exception code: 40010006

  Exception offset: 0000b 727

  OS version: 6.1.7600.2.0.0.16.7

  Locale ID: 1033

  Additional information 1: fc98

  More information 2: fc989e251a1dc78f16199b78d1e7814b

  3 more information: f3d0

  Additional information 4: f3d0eda1f28439ce691a4e21b0e9ba44

  If additional information is needed, please let me know. I'm happy to provide.

  Thank you all

  Hello

  Sorry for the delay in responding to this message.

  As you get this on the domain network, ask to view the query in the TechNet forum for better support.

  TechNet Forum

  Answer us if you need help with Windows problems and we will be happy to help.

• Game.exe has stopped working

  I recently installed a game online and after the installation, I get a message saying games.exe has stopped working.  I have windows vista.  Any ideas.

  Hello lambo123,

  The relay please you use the version of the program. Also, try to perform a clean boot to verify if a background program may interfere and then check the issue. To do this, please see the link below:

  http://support.Microsoft.com/kb/929135

  Thank you

• Difficulty? HPSF.exe has stopped working

  I ask to help correct this error message I receive.

  HPSF.exe has stopped working.

  Thanks in advance

  Hi, in Virginia,

  What is your model of computer?

  What Windows operating system do you use?

  Name of the element:

  HP Support Assistant

  Name of the file:

  HPSF.exe

  Go to Control Panel, programs & Features.Select HP Support Assistant and uninstall it. Restart your computer after its withdrawal.

  Then, download the latest version for your machine from the link:

  HP Support Assistant

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-78274-1

  HP Support Forums

• can't access games - onplay.exe has stopped working

  I can't access my games when I click it it says onplay.exe has stopped working windows is looking for a problem, but nothing does.  Can you help me?

  [Moved from comments]

  Hi Sue,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems with a game does not.

  1. what operating system is installed on the computer?

  2 what is a line or a game offline?

  3. If it's an online game then what browser do you use to access the game?

  Answer the questions to help you best.

  Good day!

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional