nucleus of task go CRAZY lol

Similar Questions

• Sound on my laptop is not as strong that used to be, all the sound settings are set to high

  Hi my laptop is a hp g6 on windows 7 64 bit.

  My problem is that my volume seems not to be so strong that used to be, all the settings of the machine are set to full volume. the only thing I can think is the software I have installed all the latest drivers can have down loaded a wrong?

  concerning

  DigitalKen

  P/S, please help it's driving me crazy, lol

  Hello

  One thing that may help is the following: If this option is available depends on the IDT pilot.

  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• the administrator account deleted, andf the network path is missing

  locks of administrator that it is everywhere in the things of files I can access and I can't have any idea how, also when I click on the drive c system32 he says correctly entered network path or its lack

  OK I'LL TRY THANKS, AS WELL AS THE SETTINGS OF THE USER ACCOUNT, ITS LIKE 1/2 OF THEM ARE LOCKED AND THE OTHER IS NOT, AS I CAN'T ADD ANY NEW USERS TO DO ANYTHING. I CAN, HOWEVER, ADD A PASSWORD. SO I'LL TRY AND CHANGE THAT AND SEE IF IF WORKS. THE SETTINGS OF THE USER IS LOCKED I CAN'T TURN DOWN. MAN, THIS IS CRAZY LOL

• Windows vista updates keep coming back

  OK here is my problem > everytime I turn on my computer or restart my computer it says (configuiring updates do not turn off the computer) and then takes an hour or more so when that stops and tries to go to windows it says (updates were not properly confiquired. restoration of changes, not stop computer... and takes even longer to do... today) , it took nearly five hours before that I could use my computer...

  also, I don't know if this will help or not but can't go to all the backups, it says I have none.

  Please HELP ITS DRIVING ME EVEN MORE CRAZY lol

  Hi angea,.

  Thank you for using answers Forum.

  Are you referring to the restore points system or computer backups that you have made your files?
  Restore points are deleted after some updates, but there should be at least one.

  Long update times can sometimes be the result of anti-virus software preventing the update of scripture to secure portions of the operating system.

  I suggest to disable your anti-virus temporarily while performing the update.

  If this does not help, there may be software conflicted with the update process.

  You can perform a clean boot to isolate programs starting for the origin of the problem.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK, and then click restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Please let us know if that helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Linksys WRT54g + WAP54g setup help

  Yes I know im using a material more older, but its what I have available lol. Hoping someone can help out me. its been listen to me like hell.

  play with it for a few days and I can not understand
  its driving me crazy lol hope someone can help.

  Here's the Setup program.

  WRT54g router is configured in A with connection Wi - Fi on.
  Laptop to wireless connection point C , which lies on the opposite side of the House. so that means that it is very weak signal.

  now looks like A-C

  Now, I tried to put WAP54g to the point B , so that she could get the signal to the point and he raises so that the signal can reach the point C

  so, it looks like now a C-B - less is what im trying to accomplish.

  the wap54g does for AP mode and I tried all the MS and cannot operate. IM missing a step, i just don't know where lol

  Access point
  The AP client
  Wireless Repeater (it seemed like the obvious choice, but it does not work or I did wrong)
  Wireless Bridge

  can anyone?

  Thank you

  If you are referring to my previous post, you can configure your access point in Repeater mode and router and wireless access point communicates and it will send the signal wireless to your laptop. If you want to connect the AP wired to the router then configure the AP in AP Mode.

• "Windows has recovered from an unexpected shutdown" Please help

  Well firstly hello =]

  The problem I have is that when I leave my PC on overnight, for a reason any update/install/etc when I wake up in the morning I see that it has restarted and he has a message on the screen that says: "Windows has recovered from an unexpected shutdown. When I click details see this is what I get:

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  08-03-2010 02:28

  Status
  Solution available

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 11274

  Files helping to describe the problem (some files may be is no longer available)
  Mini030810 - 01.dmp
  SysData. XML
  Version.txt
  MEMORY. DMP

  Additional information about the problem
  BCCode: 124
  BCP1: 00000000
  BCP2: 85E133F0
  BCP3: B2000000
  BCP4: 00020005
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Information about the server: db7659f6-368a-4113-8453-8a5b5e45cb39

  (Here's a screenshot in case its more useful: http://img694.imageshack.us/img694/9095/problemhm.jpg)

  This happens whenever I leave my PC slowed down and go to bed, it IS NOT the case while I use it.

  I'll be glad if someone could help me because its making me crazy lol.
  The PC is new I bought it a week ago about and for as far as I know its been happening since I bought it.

  4 GB RAM DDR3
  Intel Core i5-650 3.20 GHz
  nVIDIA 9600 GT 1 GB DDR3
  Windows Vista Edition Home Premium 32-bit x

  We do not choose it as the products you BUY to fix a NEW computer from the links that you provide here.

  Your computer is covered by the warranty of the manufacturer of your computer.

  I do not get a NEW PC.

  Download the the difficulty of YOUR manufacturer.

  Mick Murphy - Microsoft partner

• Inspiron N7010 can not disable the Touchpad

  I have an Inspiron N7010, Windows 764 bit, it was determined that the hard drive was once again, therefore, dell sent me a new hard drive, I made an image of the system on an external hard drive, then installed the new hard drive without any problem.   BUT after getting thru all the updates I noticed the touchpad has been activated and I always use a usb mouse, so I like the touch pad disabled.

  She used to take a minute to turn it off, now nothing works going on at the control panel and mouse properties gives me NO option to turn it off, I'm pretty sure that the last time this happened a Dell technician downloaded a different driver and it sets like that, but I don't remember for sure.  I went to Dells driver support and let Dells Diagnostic scan my computer and tell me what I need drivers.  I down load them and installed what he said and it came that I already had newer drivers than those it says to download, I just download them anyway to make sure and NOT luck.

  Is there maybe another driver I'm missing, or could I do something out of order, when I installed the new hard drive and loaded my system from the last hard disk image? Everything went very well, I thought, I have NO problem with my mouse external, other that I can not disable the touchpad or the touchpad and it makes me crazy lol. I sincerely appreciated any ideas or help with this.

  Thank you in advance!

  I GOT MY ANSWER!

  I found my driver and Utilities disc provided with my computer and found the touchpad on the disk driver and installed it on my computer and after restarting, I went to my mouse and presto, now I have the RIGHT driver, so I'm HAPPY to REPORT that THIS has been RESOLVED!

  Thank you and HAPPY HOLIDAYS!

• The DMP 5.0.2 to 5.2 reclassification issues

  I'm trying to migrate a DMM 5.0 box that runs on the old platform of hardware supported for a new DMM 5.2.1 box on hardware supported.

  Is it possible to upgrade ONLY the DMP and point them to a new DMM without upgrading the DMM?

  I'm having a time unable to get 4305 improved DMP from 5.0.2 to 5.2.1 due to the upgrade of the required core.

  I tried the upgrade of the first pit so that the DMP were still registered with the DMM 5.0 box. There no choice "is the kernel image" when creating the task of firmware tip dmp.

  I have advanced and updated the firmware to 5.2.1 on two 'test' DMP and keeps them on the DMM new performance 5.2.1 (changed DMM central IP mgmt and web account passwords). DMP are appearing, but fail to recover commands to reboot.

  I defined the core 5.1 as a medium on the new DMM and created the nucleus under tasks advance firmware upgrade.

  I start the upgrade of the core of the DMM 5.2.1.

  Under the "check status upgrade", it shows he's starting. The DMP eventually restarts, but even once, never recover.

  What I'm missing here?

  Any help is appreciated.

  Kind regards

  Doug Thompson

  Atlanta Customer Briefing Center

  Doug.

  I have a specific FAQ to this on the links I posted.

  The FAQ explains how to update the kernel without

  a DMM.

  This is done manually...

  See you soon!

  T.

• The new facebook killed my Dx application blackBerry smartphones Pearl other apps no longer works...

  OK, this is not quite dead, but I just downloaded the new update and as it was the download I received SMS messages.

  I let it finish downloading, with uninstalling and restarting the older version but then I couldn't find my new messages and the layout was weird and now I can isn't even access my SMS to verify if messages or send new and if I try to click on the TEXT Messages my cell freezes.

  Is it possible that the new application is initially a little problem on my phone?

  I can only assume it came from the update that the phone is barely 2 weeks old and I have never had a problem with it. Also, the new facebook application works very slowly... I was wondering if there was a way to downgrade to older version? In hope that maybe my Pearl will start working properly again.

  I believe actually say that I finally found these messages drasted!

  But that's exactly what I ended up doing...

  Click the menu - messages icon - screen - display folder

  I started to go through each folder individually, until I finally found the '3 new' who were not new and were somehow 'relisted' as 'new' nearly a week and a half after I had received and read them...: strangeness S. Again, I couldn't access to actually open them so I just deleted them. He always showed that I had 3 new messages, so I did another reboot (with cell is turned on, remove the battery, wait 1 min & reinsert) and when it loaded up the notification had finally disappeared. Yadira I was starting to go crazy lol

  So, I just wanted to say a big THANKIES EVERYONE to help him, he was greatly apreciated!<3>

• Bought the language in Arabic but always pack me for buying it for Windows 7

  OK, so I bought and then download a Microsoft language pack installed. A message will appear in Arabic and I don't know what he says. Then I go to word and I see that it is not yet enabled, and then it throws me back to the site to purchase the pack again! I have Arabic due in paper and it is really making me crazy lol

  In Windows 7, you can get the pack of Arabic language for computers that are running Windows 7 ultimate or Windows 7 Enterprise. Windows 7 language packs can be installed only from the section optional updates in Windows Update. However, these language packs are not available on the Server Microsoft Windows Server Update Services (WSUS) or through the Microsoft Download Center.

  To download and install a language pack in Windows 7, follow these steps:

  1. start Microsoft Update. To do this, click Start, type Microsoft Update in the search box, and then click Microsoft Update in the list programs.
  2. click on the links to optional update for language packs.
  3. under the category language packs Windows 7, select the desired language pack.
  
  Note if you install several additional language packs, disk space and system performance are affected. In particular, system performance and disk space are affected during maintenance operations, such as Service Pack installations. Therefore, we recommend that only add you a language pack to your computer if you use the language pack.

  4. click OK and then click install updates to start the download and installation process.
  Watch more closely the language packs:

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise
  http://support.Microsoft.com/kb/972813

  In Windows 7 language packs
  http://msdn.Microsoft.com/en-us/goglobal/ee461121.aspx

  For Vista, please see:

  How can I get additional language files?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  Kind regards

  Shinmila H - Microsoft Support

• Computer laptop Windows 8 is not connecting to wifi after update

  My windows laptop 8 recently updated and now I have wifi problems.

  It is connected to my wifi, but won't really go on the internet?
  Makes me crazy lol
  My laptop is an Asus K55A
  Can anyone help!

  It works:

  -> Intel® Dual Band Wireless-AC 7260 more Bluetooth 4.0<>

  -> It works already any WiDi + WiFi + BT<>

  Uinstal all WiFi + BT aplications for before connection.

  Install the sample driver to Win 8.1 64bits

  The sample driver for Intel link

  Œuvres:

  -WiFi, WiDi, BT

  -Skype reception/end calls of the click in the headphones.

  -Sending pictures from phone to computer (Android or Win Phone)
  WiDi - by dragging your finger across the screen.

  (Thanks INTEL who you are). It works, nothing more, I'm sorry.

  Another manufacturer loose hell (Broadcom, Atheros, Keeler),

  My year of life, for the configuration of return!

  

  

  

  other devices---> push their signal---> your card is reduced.
  because do not want to collide with the old maps of wifi technology.
  Your card is smart and gives way to the road, another wifi. :-)

• Delete the portfolio without removing Adobe Creative cloud account

  Hello!

  I find very confusing as according to the instructions in the support section, it is only possible to delete a portfolio if you also delete all the

  Adobe Creative Cloud account...

  There MUST be another way since it is a bit too radical.

  Here's the question:

  I have a wallet connected with Adobe Creative Cloud account. This portfolio contains a user name that is different from the Adobe Creative Cloud account.

  This should be separated.

  I simply to remove the portfolio and all is good.

  But according to the news that I read but I can't do this when I delete my entire membership. Crazy LOL?

  For any help, recommendations, I kiss you Thnaks

  Hello! If you want to remove your Behance profile, you can do so by following these steps:

  1. go to your 'me' tab > visit Account Settings > tap the 'Delete account' - here, you will have the option to delete.

  * Please note - all the destruction of profile Behance are permanent and cannot be recovered. All content and stats will be erased. Deletion of a Behance profile will not affect your Adobe ID

• Dreamweaver is right for me?

  Basically I have the .xml files for a manual I am to change.  I need to edit the .xml files and then publish (export) as a PDF file.  Is Dreamweaver good software to use for this task?

  Lol Dreamweaver is not the right tool.

  Take a look at InDesign. It allows you to import XML, format it nicely and export to PDF format.

• URLRequest does not contain anything...

  Hi, I have an xml file that contains several products each with their corresponding background image, image in the foreground, text, and Web site. The LoadXML class load this xml file and creates an array of each image, text, and Web site. The main class loads then each image comes from the array of background images in the onBackgrLoad() method. This is done using a loop that traverses the array of circles (called background []) and charge each in turn. I have sucessfully on tracing background [] receive a string of all different background image paths. However when I look at the backgrRequest and the backgrLoader they both contain the null value. Images don't appear on scene, but either an error message appears! The same for onImageLoad (this should load the image in the foreground) and onTextLoad.

  Ive been stuck on this for SO LOOONG, its makes me crazy lol!

  public class Main extends Sprite 
      { 
          //____________________________________________________________________________Vars : Newly created 
   
          public var images : Vector.<DisplayObject>; 
          private var loaders : Vector.<Loader> = new Vector.<Loader>(); 
          private var loader : URLLoader = new URLLoader(); 
          private var backgr : Bitmap;  
          private var img : Bitmap; 
          private var titel : String; 
          private var cover : Sprite; 
  //        private var textContainer : Container_Text = new Container_Text(); 
   
          //____________________________________________________________________________Vars : From other classes 
          public var coverflow : CoverFlow;     
          private var bg : BG; 
          private var sb : ScrollPaneExample; 
          private var sl : ScrollLabels; 
          private var productSummaryLabel : ProductSummaryLabel; 
           public var loadXML:LoadXML; 
  //        private var reflection : Reflection;         
   
          private var xmlData : XML; 
          private var hintergrund : Array; 
          private var pfad : Array; 
          private var maxProducts : int;         
          private var numOfProducts : int;         
          private var numOfCategories : int; 
   
      //____________________________________________________________________________Constructor 
   
      public function Main() 
      { 
          initBG(); 
          trace("Step 0: New LoadXML being loaded in Main class"); 
          loadXML = new LoadXML(); 
          loadXML.addEventListener( Event.COMPLETE, onBackgrLoad); 
          trace("Test: XML Load Number of Products (Main class): " + numOfProducts); 
      } 
   
      //____________________________________________________________________________Methods 
   
      // Loads the backgr for each image. 
      private function onBackgrLoad(e : Event) : void // will this be a prob seein as class is sprite?? 
      { 
              var backgrLoader : Loader = new Loader(); 
              var xmlData : XML = loadXML.getXMLData();  
              var hintergrund : Array = loadXML.getBackgr();     
              var numOfProducts : int = loadXML.getNumOfProducts();         
              trace("Number of Products (Main class): " + numOfProducts); 
              trace("Hintergrund paths (Main class): " + hintergrund); 
   
              // On completetion of this method or in case of an error do the following: 
              backgrLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onImageLoad); 
              backgrLoader.addEventListener(IOErrorEvent.IO_ERROR, handleXMLError); // try takin this out: contentLoaderInfo. 
   
              trace("Step 5: Backgr images now being loaded."); 
   
              /* Create a template bitmap to hold the image info */     
              var templateBitmap : Bitmap; 
              var templateBitmapData : BitmapData;     
   
              // Loop through the background urls 
              // A summary should appear for each object once it is in the center 
              for (var i : int = 0; i < numOfProducts; i++) 
               { 
                  var backgrRequest : URLRequest = new URLRequest(hintergrund[i]); 
                  trace("Hintergrund[i]: " + hintergrund[i]); 
                  trace("Trace backgrRequest: " + backgrRequest); 
                  cover = new Sprite();   
  // Method 1 
                  // titel = String(e.target.data); 
   
                  // Method 2 
  //                var titelString : String = titel[i]; // has to be a dynamic string so change this and put in container 
  //                trace(titelString); 
   
                  // Method 3 
  //                var titel : TextField = event.target.String as TextField; // this is text so import as textfield? can i do this like this? 
          //titel shud be rotated. this can be done using bevel filter bt atm not supporting this (look at reflection probs) 
                      try  
                  { 
                      backgrLoader.load(backgrRequest); 
                      trace("Trace backgrLoader: " + backgrLoader.content); 
                  } catch (error: ArgumentError) { 
                      trace("An Argument Error has occurred."); 
                  } catch (error: SecurityError) { 
                      trace("A Security Error has occurred."); 
                  } catch (error: Error) {  
                      trace("An Error has occurred."); 
                  } 
                  trace("onBackgrLoad Loop: " + i); 
   
                  templateBitmap = Bitmap(backgrLoader.content); 
                  //templateBitmap = e.target.content; 
                  //templateBitmapData = templateBitmap.bitmapData; 
   
                  /* Attach the template BitmapData to each backgr image */                 
                  var backgrBitmap : Bitmap = new Bitmap(templateBitmapData);                 
                  cover.addChildAt(backgrBitmap, 0);                            
  //                coverHolder.addChild(cover);    
   
                  // Method 1: target data into bitmap 
  //                var backgrBitmap : Bitmap = e.target.data as Bitmap; 
                  // Adds the backgr to the already exisiting backgrs inside the Bitmap "backgr" 
  //                backgr += e.target.content as Bitmap; 
                  //var myNewBackgr = e.target.loader; // Necessary? 
   
   
                  // Method 2: create object 
                  //BAD IDEA to create a bitmap obj since this cant be rotated or tweened 
  //                var backgrObj : Object = backgrLoader.data as Object; or //e.target.data 
   
                  // Method : Imagemultiloader 
  //                var backgrBitmap : Object = (e.target as ImageMultiLoader).data 
  //                // determine imagemultiloader!! 
   
   
                  // Method 3: create template bitmap     
                  ///* Create a template bitmap to hold the image info */     
  //                var templateBitmap:Bitmap = e.target.content;     
  //                var templateBitmapData:BitmapData = templateBitmap.bitmapData;     
  //                /* Loop through your tiles */     
  //                for (var a:uint = 0; a < tilesWide; a++)     
  //                {        
  //                    for (var b:uint = 0; b < tilesHigh; b++)        
  //                    {                
  //                        var tile:Sprite = new Sprite();            
  //                        /* Attach the template BitmapData to each tile */                 
  //                        var tileBitmap:Bitmap = new Bitmap(templateBitmapData);                 
  //                        tile.addChild(tileBitmap);                 
  //                        tile.x = a * tile.width;                 
  //                        tile.y = b * tile.height;                 
  //                        tileHolder.addChild(tile);         
  //                    }     
  //                } 
   
                  // Method 4: Load straight into BitmapData 
                  //var img1:BitmapData = BitmapData.loadBitmap("img2")  
                  //var img2:BitmapData = new BitmapData(img1.width, img1.height, false)  
   
                  // Method 5: Try with image holder 
                                  // Try with an image holder.   
  //                backgrMc = imgHolder; 
   
  //                var backgr : Bitmap = Bitmap(e.target.content); 
  //                 
  //                try { 
  //                cover.removeChildAt(0); // should i take this out to ensure not just last image loads? 
  //                } catch (error: Error) { 
  //                    trace("Catch error here."); 
  //                   } 
  //                cover.addChildAt(backgr, 0);  
              } 
          } 
   
              public function onImageLoad(e : Event) : void 
          {             
              (...)        } 
   
      public function onImageLoaded(event : Event) : void 
      { 
  //        var xmlProductList : XML = xmlData.produkte.produkt;  
  //        var xml : XML = new XML(event.target.data); // will this work now tht there r 3 things loaded? 
   
                  // To create a shadow only UNDER the backgr image 
          backgr.filters = [new DropShadowFilter()];  //can this var backgr be used from above? i put them on public 
   
   
   
   
          // Turn xml data into three seperate Bitmap images and put this in a cover 
          // Insert all the images on top of each other in a single cover 
  //        cover.addChildAt(backgr, 0); // At the back 
  //        cover.addChildAt(img, 1); // On top 
  //        cover.addChildAt(titel, 2); // On top // IS THIS POSSIBLE 
   
   
   
   
          //To create a shadow around the side of the whole image and the bottom 
  //        cover.filters = [new DropShadowFilter()]; 
   
          // Ensure cover is 20px smaller height + width 
   
  //        coverDisplayX = -backgr.width / 2; // backgr is equal to whole image size so not necessary to speicify whole img 
  //        coverDisplayY = -backgr.height / 2; 
  //        coverDistanceX = -50; 
  //        coverDistanceY = -50; 
   
          backgr.x = -backgr.width / 2; 
          backgr.y = -backgr.height / 2; // Height is too long but I managed to decrease pix to 75% 
  //        cover.graphics.lineStyle(0, 0xFFFFFF); // Border around image 
          cover.graphics.drawRect(backgr.x, backgr.y, backgr.width, backgr.height); 
          images.push(cover); //  images.push(imageLoader.content); 
   
   
          // Initiate the rest of the methods 
   
              // The nr of images on coverflow should not be more than number allowed on stage.  
              if(images.length <= maxProducts) // Used to be == 
              { 
                  initCoverflow(); 
              } 
              else 
              { 
                  trace("More images than the maxProducts stated by user. Please increase the maxProduct nr or delete some images."); 
              } 
      }  
   
   
      //____________________________________________________________________________Initiations 
   
      private function initCoverflow() : void 
      { 
          if(coverflow)  
          { 
              removeChild(coverflow); 
              coverflow = null; 
          } 
          coverflow = new CoverFlow(images); 
          coverflow.x = stage.stageWidth / 2; 
          coverflow.y = stage.stageHeight / 2; 
          addChildAt(coverflow, 1); 
      } 
   
  (...)  
          //____________________________________________________________________________Error catching 
   
   
          private function handleXMLError( event:IOErrorEvent ):void  
            { 
               trace("Fehler beim Aufrufen von XML."); 
            } 
      } 
  }  
  
  

  Why do you need to pass the event to the drawCover at all? You can just do:

  public function onBackgrLoaded(event : Event) : void {
       cover = new Sprite();
       backgrBitmap = event.target.content as Bitmap;
       cover.addChildAt(backgrBitmap, 0);
       // How do I call the method drawCover to load once this method is finished????
       drawCover();
   }
  

  But if you insist, you drawCover function should look like this:

  private void drawCover(e:Event):void

  or:

  private void drawCover(e:Event_=_null):void

• Display problems are driving me crazy - when I click on a program already open in the task bar it does not open on the other open pages

  This happens if I click on a file or a file that is already open. The opened file will blink in the taskbar, but does not open on the top of any page is currently on the screen. When I click on previously open programs bring them on top as usual. Open another windows word file in the start menu did not appear at the top of the page currently open also. Any ideas on how to solve this problem?

  This happened after one of the three things - the upgrade of windows components, the advanced upgrade system of care or following a computer crash that preceded the front mentioned updates but I'm not sure that one.
  Thanks in advance

  Hello

  I suggest you to check the question in the new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783