Number generator speed

Similar Questions

• How can I create a random number generator, protected by password and username?

  I have attached a VI that is a random number generator. I want to just be prompted for the name of user and password when I start this generator. There should be three names of users and passwords found in three different files. I would like to know how to link the code username/password for the code generator and how do the program to know that there are three txt files in my computer with usernames and passowrds.

  
  

• Smartphones from blackBerry Desktop Manager software - random number generator

  Hello

  I have a blackberry that I configured to synchronize with an outlook account. The other day when it is plugged, I received a message that pops up saying something about a "random number generator '. When I searched the problem of people said to uninstall/reinstall the Desktop Manager software with the latest version. So I downloaded the latest version of the software, and when I ran everything has been disabled. When I uninstall/reinstall the version that we used before the same thing, everything has been disabled. This could be the cause of this problem? I guess it must be a hardware problem.

  Thank you for your time.

  Reid

  Hi and welcome to the forums!

  I recommend you to perform the following procedure

  to ensure that you have removed all the system

  the files and registry entries made by previous installations.

  Make sure that all antivirus and firewalls are down when you install

  The other two links will help check connection problems.

  Bifocals

  Don't forget to adjust your thread.

  Put the check mark in the green box containing your answer! Thank you

  Own installation procedure;

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...

  Assistance Fund

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB00125&sliceId=SAL_Pub...

  Troubleshooting USB connection:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB02640&sliceId=SAL_Pub...

• No serial number generated from redemption code

  I bought Photoshop elements 11 at Best Buy.  The card in the box says enter the redemption code to retrieve the serial number required to install the software.  I went to the adobe site, entered the code, it is stated that it was good, but did not generate a serial number.  There are a number of series outside of the box that Best Buy scan to activate it, but that number doesn't work anymore.  What should I do next?

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Random number generator. Even and odd numbers

  I have a problem.

  I have a generator of random numbers, it goes from 0 to 20, I need to have two indicators, we show you how many numbers are pairs, and how much isn't.

  I tried to table D use the decimated 1, but as these numbers are random, it doesn´t works for me. I m new with LabView and I Don t know if there is another way to make it work, I need help, especially with a few examples.

  Thank you very much.

  
  

• Random Number Generator, throwing error

  In my code, I have a function chooseTarget which analyses all children performing, determines if they have _enemy in their name of the instance, it adds a table and returns an index on this table.

  function chooseTarget (): Object

  {

  var listofenemies:Array;

  for (var n: uint = 0; n < stage.numChildren; n ++) {}

  If (stage.getChildAt (n).name.indexOf ('_enemy', 0) > = 0)

  {

  listofenemies.push (stage.getChildAt (n));

  trace (listofenemies [n]);

  }

  }

  if(n == stage.numChildren)

  {

  var ran: number = Math.floor (Math.random () * (listofenemies.length - 0 + 1)) + 0; This gives an error

  var curtarg:Object = listofenemies [a]

  }

  Return curtarg;

  }

  When this function is called, however, I get

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  Pointing to the variable ran.

  What is going on?

  There is no table.  to remedy this:

  var listofenemies:Array = [];

• Launch PhotoShop CC number generator

  Whenever I run my CC of PhotoShop, I get a dialog box with the error:

  There is a problem with the generator. Quit Photoshop and try again. If the problem persists, remove third-party plug-ins or try to reinstall Photoshop.

  I reinstalled and I am up to date. Someone knows how to fix this?

  Hello

  you use mac or windows

  If you use mac - see the application folder - folder cc 2014 Photoshop > plugins and there is generator file - move this folder on the desktop

  If windows > c:/program files/adobe/Photoshop cc 2014/plugins and move the generator on the desktop folder.

  Restart Photoshop and see if you still get the error message

• How to generate a random number within a specified tolerance and control than tolerance.

  I am trying to simulate data without using a data acquisition device using a random number generator and I want to be able to control the "range" the random number generated well.  On the front panel, the user can enter a nominal number, and the random number generator would generate numbers more or less disponibles.003 this number nominal.  The data would be delayed on a chart.  Someone knows how to do this?  Or if it is still possible?

  Just for the sake of information, the random number is supposed to resemble thickness measures, that's why I want to simulate more and less disponibles.003 because the data might be thinner or thicker than the nominal value.

  Thanks in advance!

  Two ways of approaching the issue.  First of all, for even distribution, you can 'Roll the dice', which is the (0,1) random number function, multiply the result by 0.06 and then add Mean - 0.03 to center around average distribution.  If you simulate a real process, my initial guess would be that the results would follow a normal distribution.  In this case, you can use the VI of white noise Gaussian of the palette of generation of signals with a standard deviation of 0.015 if you wanted 0.03 to be the point of 2 sigma, then add average results.

• seedRandom (index, true) generates each image a new number. Why?

  Hi, I would like to understand why this code here:

  j = 0;

  Accum = 0;

  seedRandom (index, true);

  While (j < time) {}

  Accum += random (10);

  j += thisComp.frameDuration;

  }

  Random (100)

  generates a different number for each image. But this one:

  seedRandom (index, true);

  Random (100)

  doesn't work. Can someone explain this please?

  The random number generator generates a different number each time it is called.

  In your expression, on the chassis of the IE of your comp, you call the number generator random I time and take the result from the last call.

  If you always take the result of the first call, the result would be the same on each image.

• generate a random number in a range of duplication no

  Good day people,

  I need help once again. I want to animate an image inside a movieclip with frame label animate1, animate2, animate3 and animate4.

  I managed to generate random numbers, but my concern is I want my animation not animate same image twice, here is my code.

  = main time line code =.

  function randRange(min:Number,_max:Number):Number {}
  Generate a number between and including min - max
  var randomNum:Number = Math.floor (Math.random () *(max-min)) + min;
  Return randomNum;
  }

  
  

  build table to hold the frame label names
  var frameArray:Array = new Array();
  frameArray [0] = "animate1";
  frameArray [1] = "animate2";
  frameArray [2] = "animate3";
  frameArray [3] = "animate4";
  
  Get created random number
  var n: Number = plageAleatoire (0, frameArray.length);

  
  

  trace ("n": + n);

  
  

  Stop Frame label name
  This.img_ani.gotoAndStop (frameArray [n]);

  
  

  trace ("frameArray:" + frameArray [n])

  = label code and frame inside a clip with 4 frames containing different pictures =.

  as layer: stop();

  image tag: animate1, animate2, animate3, animate4

  Any help is greatly appreciated. Thanks in advance.

  It is not a routine of brewing, integrated, but there is a pretty standard shuffle function that was happening around...

  var frameArray:Array = new Array();
  frameArray [0] = "animate1";
  frameArray [1] = "animate2";
  frameArray [2] = "animate3";
  frameArray [3] = "animate4";

  function shuffle (a) {}
  var p;
  var t;
  Ivar var;
  for (ivar =. Length-1; Ivar > = 0; Ivar-) {}
  p = Math.Floor ((Ivar+1) * Math.Random ());
  t = a [ivar];
  a [ivar] = a [p];
  a [p] = t;
  }
  }

  trace (frameArray);  See the property before shuffle

  Use:
  Shuffle (frameArray);

  trace (frameArray);  Show after shuffle

• How to create a negative feedback on a case structure to estimate changes in speed among a range of speeds

  Hi I am new in programming with LabVIEW and I try to create a program that allows to estimate gear changes based on how fast the vehicle of support falls. The speed is measured by an OBD device and the results are saved in a spreadsheet. I created a sample program that contains a loop that reads the table of speeds of line by line. I then created a case 2 structures for example 2 speed brackets each support represents a gear (3rd 35-54 km/h, 4th gear gears 55-79 km/h). My problem is I want to count how many times the speed changes of support from one to the other to symbolize a change of speed. Right now my program will count only the number of speeds within each support the entire speed range.

  So in summary I need help, trying to create an effect of negative feedback while first gear which falls within a range of speed is counted as a speed change, but none afterwards speeds are counted until a new slice of speed came.

  I attatched the logfile and VI of suggestions would be greatly appreciated!

  Thank you

  Michael

  Hi Michael,

  I made some changes to your code

  1 replaced the 2 structures dealing with one, which displays the report.

  With the help of numerical values (instead of Boolean values) as the case selector - you can use whole; I see in the file CSV that all your speeds are integers of anyway, but I added a bit of code that allows to convert an integer, rounded down. So where logic says 35-54kph inclusive, because whatever between 54 & 55 be have been rounded down, this will also take to speeds up to 54.999999 (etc.) if need be.

  I then sent this 'current gear' variable to a shift register, so each iteration of the while loop allows to compare the report with the previous train. This case structure returns 0 if the speed is out of range (35-80).

  2. I added the code that essentially says "is the new different gear to gear for the last iteration? YES - to increment the number of variable gears. NO - do not change the number of variable changes"this variable is also passed in a shift register, it's can be passed from one iteration to iteration.

  3. I've got rid of 2 shift registers that you added, to write off the table index, because it is more effective and less code to just use the terminal of the iteration. (Don't forget iterations of loops are zero indexed).

  At present, the code I've written generates the total number of changes in speed (0-3, 0-4, 3-4, 4 - 3, 4-0, 3-0). If you only want to speed changes, there are between 3 & 4, you could put a structure affair around the section of code that I added a box of decoration autour and run that code if the current/previous gear is not = 0.

  I hope that this help - at least to give you an idea of how this can be accomplished.

  Thank you

  Amy

• speed dial

  How to save ├a speed dial numbers?
  I have a Samsung galaxy s3

  Hello.

  There was an option in older versions of Android of Skype to choose Skype or your mobile phone service to call.

  When you keyboard a phone number on the phone and press «call», the option came to use the phone or Skype to call this number (or speed dial). This feature is no longer available.

  Skype Android doesn't have a characteristic speed dial.

  Steve

• The value of the seed of the generator of random numbers in Matlab node

  Hi all

  I need to use random variables inside a Matlab Labview Commsuite node. I generate with the randn() function. Is it possible to put the seed of the random number generator such as the random numbers are reproducible?

  Hi Steve,.

  You can use randn ('seed', seeds) to initialize the random number generator. The seed must be a positive integer value. For example, randn ('seed', 3). In addition, this seed is global within the entire application. This means that if the randn() function is called MathScript multi-node that could run in parallel, random results are not guaranteed to be the same after you change any part of your code. But you should always get the same results for repeated passages of the same code.

• How to generate analog signals?

  Hi all

  I'm trying to generate analog signals to simulate the position of the valve. I also want to simulate the position of the valve 0 - 5V (analog signal).  I've implemented the numeric position of the valve by using the toggle switches, but I want to implement analog signals.

  You can help.

  Thank you

  You can just use a random number generator.

  

  Since you have no generator hardware signals of NOR, I'm not sure why you are posting to this Board. Generic questions of LabVIEW. Post to this Board.

• How can I generate multiple unique random numbers?

  Hello

  I am trying to generate multiple random numbers between a given set of numbers (1-52) and do not have the same number generated twice within this group. I can compare the numbers of last and next with the function to compare, but how would I go about comparison of all numbers generated without using a huge list of shift registers...

  Any help/ideas are welcome and appreciated.

  Jason

  Solved my problem. IM passing the random number through a registry to offset to each case and build a table every time. I then searches the table for the new random number. If the number is not found I get a value of-1, another thing is an index value of 0-everything. If a comparator greater than (-1) indicates that the same number is in the table and then I can raise this matter until the same number is not found.

  Kind regards

  Jason