Allowing the scanning of an iMac

Similar Questions

• How can I increase the resolution (DPI / PPP) an image scanned on my iMac?

  How can I increase the resolution of a scanned image. I am currently using a new all-in-one Photosmart HP 5512, I installed everything to the natural drivers have a usp cable connecting the PRINTER to my iMac. I'm on OS 10.7.4.

  The HP icon utility allows me only increase the size of the file (image quality) not the PPP/CIO

  Thanks in advance for any help

  Hello

  You can change the resolution using the application from HP as follows:

  Click HP scan at the top and then click on Preferences.

  In the launch windows, select the required resolution.

  Close the preferences window and perform analysis.

  Kind regards

  Shlomi

• Change the directory list "scan to" in the HP Director on iMac (Mavericks)

  I have an HP CM1312 MFP running on an iMac with the Mavericks.

  When you install the HP Director, at some point, the software takes over and says "installation with default settings" or similar, and then it's over.

  The resulting, program prints and scans correctly. However, I want to set up a destination for scanning to file option.

  When using the scan to file option there is no option to add destinations - there is a very limited choice (of memory just Documents and desktop).

  I have a folder called "scans" on my desktop and would like to add this destination in the drop-down list box "Scan to file."

  Is this possible and if so, how?

  Thanks in advance

  Hello bilfen,.

  Welcome to the Forums of HP Support!

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Concerning

• Accidentally, I saved a PDF file in the cloud and can't be deleted from there. Help, please. I've upgraded to Adobe Acrobat Reader DC and it does not allow me to save the scans on my computer.

  Accidentally, I saved a PDF file in the cloud and can't be deleted from there. Help, please. I've upgraded to Adobe Acrobat Reader DC and it does not allow me to save the scans on my computer.

  Or simply open CD player

  Go to the Home tab then Document Cloud

  Click on the PDF file to be removed

  Click on remove in the top

• Size of the scanned after it was sent by e-mail allows small.

  I checked on the scanner, etc, everything I could think of and the scanned image is very good in size, readable, but when it is transmitted or sent by email to another email address, it is small to read. Scan only shows windows, 300 or 600 reference but changes nothing in the received doc. How inlarge the document so that it will be readable at the other end when it is received?

  You don't have to mention what scanner you use. In all cases, refer to the documentation that accompanies it, or check with their support staff.

• Impossible to save the scan on Officejet 4500 Wireless All in one

  I use a MacBook Pro and recently upgraded to OS 10.9 mavericks. Since then, I am unable to save the scans. Wireless printing functions like photocopy. I am able to see the image on the computer, but can not save even though the dialog box allows me to choose where the analysis is saved. HP does not have any software support for this problem.

  Hi omarkhayyam,.

  Here are the drivers - OS X 10.9 Mavericks and HP Photosmart 5520 e-all-in-one software full functionality, download and save a copy on your iMac, then install.

  I hope it works for you. Keep me posted.

  Thank you

• m225dw: the scan to E-mail Setup questions

  I just bought a new m225dw printer and I am trying to set up the Email scanning function and I have big problems. When I open the wizard and it asks me to select the printer, it is showing that I have two new printers connected, choose one of them gives me a message "error communicating with the printer". The other allows the wizard to open and continue. When you enter in the wizard and enter my gmail address and password, etc. and then click on save and test returns the message "printer cannot find the remote server. If I come back and use the ip address of the SMTP instead, it returns the message "rules and procedures for the transmission of data between the server and the printer don't are not supported on the server."

  Please let me know any suggestions that this function was one of the reasons why I bought this printer model.

  Hey @FinalXodus,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are looking for scanning to e-mail with your MFP HP LaserJet Pro M225dw.  I would like to help.

  A statement based on what you are, it seems that you try strictly allow a Gmail account for use with scan to email. Unless you use this account through Microsoft Outlook or Mozilla Thunderbird you going to have any success in your configuration.   Please see the bulletin "Intricacies" of HP on this feature:

  Client Webmail (Gmail, Yahoo Mail, Hotmail)

• Where can I get a driver for Epson scanning for my iMac os 10.11.3

  I have an iMac with the current version of El Capitan 10.11.3. I bought an Epson Stylus pro printer (WF-5690). I downloaded and installed the driver scanner of Epson Web site and the error message indicates that the computer does not Scan of WSD. How can I get on my iMac. I couldn't find Capture of Image or the other. The printer and the computer are on the same connection network wi - fi. What can I do to get the scan function to work with my Mac? I appreciate any help anyone can give me.

  Sincerely,

  leonorafromarcadia

  WSD is not available for OS X. WSD stands for 'Windows Vista Web Services on devices (WSD)'

  Image capture is in your Applications folder. I have an Epson WF-3620 and it works perfectly with the Image Capture and El Capitan 10.11.4.

• Duplex charger HP 8620 document Mac error - 'the scanner could not complete the scan.

  Hello

  When the analysis attempted double helped since the document feeder, I get the following error:

  the scanner was unable to complete the scan

  If I don't select duplex option, the printer scans very well. I really need the duplex feature was that the printer was purchased for.

  I uninstalled the printer, reset and all that gubbins.

  my setup is the following, configure the printer as wireless on mac osx mavericks last generation last drivers/HP utility. Ipgraded for the latest firmware of the printer also. all without success, and now support is not open until Monday

  For more information on this...

  So I think that I managed to fix it. Different solutions etc. then forums all about I thought I would include it here. This is the steps that I found to work for Mac OS x 10.9.

  I need to follow the steps:

  1. Remove the power cable while the printer is turned on wait about 15 seconds and plug it in again.
  2. When the installation of the printer using the selection HP not the Airprint, which is added by default on Mac OS x 10.9 - capture screen attached and operating.

     

     If everything is working great and then if not go to step 3.

  3. If the printer is already installed with AirPrint go to the printer main & scanners, right click in the box on the left where you printer is displayed and click on reset printing system. -This will remove all printers found here also.
  4. Download of the latest version of the software for your operating system
  5. Install the software, restart the computer.
  6. Download the latest firmware, if it is available for your printer
  7. Add your printer and follow the steps 1 & 2. It should work and allows you to copy double-sided.

  Don't know if this is a limitation of the software or drivers but ADF allows up to 300 dpi, as the manual scanner allows all the way up to 1200 dpi.

  See you soon

  Ed

• Menu has changed, the scans disappeared... need help!

  Since this morning, something changed with my ability to access to the & use my scanner on my printer function. I have the series of J611 3050 has and used the night to print and scan last and everything works great. But when I tried to analyze something earlier, nothing is beautiful.

  It used to be (not later than last night) when I clicked on the icon for HP desket a menu would open enabled me to choose what I wanted to accomplish. Now, when I click on this icon is "printer assistant" for which nothing happens when I click it I don't see, 'See what's printing' "set preferences" and 'customize your printer', which none have no bearing on this issue that I can find.

  It used to be (not later than yesterday) that when I scanned it something a window open which allowed me to make a few changes to analysis before you save it.  It was all the scans have been automatically saved in a specific file of my choice. This window opens now is no longer, and sweeping turns to in limbo where I can't find it.

  Can someone PLEASE help me understand what happened and how do I go back to the way things were?

  Thanks in advance!

  Remy

  The solution I found to this problem is to uninstall the printer and reinstall using the latest drivers. HP released a new package of drivers for this printer and all printers that use a similar software, which corrects this problem.

  HP Deskjet full feature software and drivers

• Want 5530: problems with the scan from the printer

  Hello

  I only just bought a 5530 want all-in-one printer and it gives me problems from the outset.

  It installed fine, but when I try to scan from the printer to the computer I get the following window will appear on the computer:

  

  Which I think should happen. In my view, that he should start the correct software without having me to do anything.

  But even if I click on the "HP Scan", the software does not start, but it does not save the scan in the default location. I thought it was supposed to launch the software and allow me to choose what happened then.

  I can boot the computer software and scan as I want, but I think that to happen automatically if I scan form the printer to the computer (the printer).

  Someone at - it suggestions?

  Hi Rainbow7000,

  I had tried most of the steps that you propose before displaying the original question, but thinaks for suggesting it is useful to check.

  I managed to fix it myself.

  Basically the pop-up window was left during a previous installation of HP hardware. Even though I used the uninstall program provided, it was not completely uninstalled (annoying). So I uninstalled the new printer and then went through the registry and deleted any reference to previous material, the new printer, any other hardware HP, etc... I do not get into the registry to do this kind of thing but if the 'correct' uninstall program do not do so I have no choice.

  I then installed the printer again and it works fine. Now when I press the button it scans directly to the computer of choice and Windows Explorer appears to show the new file.

  If someone else is a similar problem and plan to do what I did then I have to remind you of the dangers of editting the registry...

  Thanks for having a look at this problem, your suggestions are appreciated.

• HP 6700 Premium Wi - Fi. The scan control panel no longer appears on my desktop.

  I have a HP 6700 Premium.  Wireless connection is ok.  I can scan a device memory to the printer/scanner control panel.  I have a 6700.exe hp shortcut on my desktop, but when I click on it, there are no options for the scan to my computer.   Until a few days ago, when I clicked on this shortcut, I had options for scanning as well as printing.  Thank you.

  I uninstall the current software and reinstall the software from the site Web of Hp. I included a link to the software select the feature complete drivers. Once the software download and is ready to install, make sure that you do not allow updates from Hp.

  Click here for the drivers.

• OfficeJet Pro 8600 Plus N911G: Cannot use the Scan to PC, option on my printer

  I recently updated from Windows 8.1 for Windows 10 and had to reinstall my printer drivers and software.  Since doing so, the office of my printer scanning function did not work.

  When I use the option on the printer, I get the message that no computer I'm done to open the HP printing software, select the scanner actions and select manage the scan of the computer.  The only thing is that twhen, I go to the HP folder in my Start menu, there is no installed printer HP software.

  I went to the page support and download the complete software solution for my printer and ran the installation, but I still do not have anything that will allow me to select the actions of scanner, and then select manage the scan of the computer.

  I even tried to use HP Print and scan v4.7 doctor.  He said full software solution is not installed on my computer and it gives me a button to click to download the software, and it is said that it downloads all the 123 file meg, then it gives me an error download failed message and offers try again immediately, but it fails every time.

  My printer is connected to my PC via my WIFI router.

  Hey there,
  Try the next step, I believe that this will help you overcome the problem.
  1. remove the printer driver of "devices and printer" which is located in Control Panel.
  2 Download this file (http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe), which is the solution full HP JO 8600 series.
  3. extract the contents of the file.
  4. open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called "RemovePreInstalledDrivers" > once you open this file black screen opens, wait for it to close, then move to the next step.
  5. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  6. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
  7 start the installation, choose the wireless option.

  Who should add the scanner to your imaging devices.
  Best Of luck ~

• All-in-one HP Officejet 5610: problem of scanning HP 5610 iMac OSX Yosemite

  HP Officejet 5610 all-in-one

  iMac with OSX Yosemite 10.10.1

  Before the installation of Yosemite, the scan worked.

  Now, when I try this happens.

  ERROR

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  • Restart the computer.

  I followed the instructions and even have updates of Yosemite.

  Nothing works.

  Help

  Thank you

  Hello @Thatsit ,

  Welcome to the HP forum.

  I understand that you sweep problems after upgrade to 10.10.

  I would like to help.

  I would like to uninstall the HP software.

  Then, just to be safe, I check and repair disk permissions.

  Redo the Apple updates.

  Reboot/restart the Mac.

  Install the software again.

• Find the Scan function

  I have a HP Officejet 5510 all-in-one printer which worked well until I upgrraded my computer earlier this year.  The printer still works, but I lost the scan function as the software is not compatible with the new laptop computer.  What I have to buy a new printer - or can it be fixed pretty easily?   I'm not tech savvy and can not pass a hunting age the good software, so if any of you good people have already done, I'd be happy to hear from you v... Thank you very much.

  Hello

  In fact, no full support for Windows 7, Vista even. The last update was Aug 12th, 2009 or for XP just over 5 years ago. :

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=311255#n197

  Microsoft gives only a generic driver that allows the printer to do the basic function: Print.

  Kind regards.