NVIDIA driver won't complete installation... pls help...

Similar Questions

• Vista won't complete installation

  Hi all!

  I tried to upgrade XP (SP3), Vista several times now and each time the installation fails.  I ran the compatibility check and the report says there is NO problem with the upgrade of the system.  However, when I run the installation of the first question that I notice is that it asks to check updates and returns a message saying I'm not connected to the Internet (although I have validated that I truly connected).  It allows me to continue with the installation.

  The successful watch installation process of copying the files, collect the files, files expansion and installation of features and updates.  After several auto-redémarre, he gets for the upgrade and reached 60% completion.  It then restarts again, and that's where he collapses.  It does not start in Vista, normally and does not even boot into Vista SafeMode.  The only option that works is to restore the XP software I had to do it several times now.

  I tried to contact Microsoft about this problem.  The site asks me to enter my product key and then tells me that the number has not been activated.  I can't activate the number without a successful however installation!

  It's frustrating!  If I hadn't paid for Vista Ultimate, I probably just give up and stick with XP (SP3).

  Is there a Setup log generated somewhere which could help to determine the cause of the installation failure?  I've only tried the installation "upgrading".  I am wary to complete installation of "destroy all your apps and I then have to re - install all the!  I know that the Docs my Vista files in a windows.old file but to things like Office 2007 (that I bought at the same time and installed fine)?

  Any help or suggestions would be welcome!  I'm quite left having to pay the sum of $ at Microsoft to help with a product that does not work, I bought!  Is there someone at Microsoft who can understand that the key is valid, even if I can't activated?

  Thanks in advance!

  Gino

  Hi Aaron!

  Well, there was a delay (life has a way of getting in the way!).  Here is the latest.  I installed Vista!  I added 2 GB of additional RAM.  I also discovered that I could update the BIOS so I did as well.  And finally, (and I think that's the key) - I bought the software for download and with a backup CD.  The Vista CD finally arrived and I installed from there.  Everything that the installation went well and I have Vista running.  I did an upgrade and not full installation 'erase and install '.  As it turns out - I still had to re - install some applications and updated even some drivers who don't appear to be problems with the compatibility report - but it seems that everything is fine.

  However - and you knew it had to be a gotcha - for some reason-Office 2007 programs all work well with the exception of Outlook 2007.  The Vista AERO interface does not work with Outlook 2007.  It works very well with all the other 2007 Office programs.  I uninstalled and re-installed Office 2007.  I ran the Office Diagnostics tool.  As soon as I exit Outlook, the Aero interface returns (I have to just run another program (Explorer, etc.).)  It's weird that this happens only with Outlook - no problem with Word, Excel, etc.

  Any ideas?

• Failed disk Seagate used CD of HP recovery and windows won't complete installation...

  Hello long player date people initially displays......

  I have an older machine of the HP A6567c... that has been modernized with almost new under the motherboard, processor and ram... Ive swapped the power provides the gpu and of course HD... heres so my question...

  I use a 1 TB hd seagate... Recently it failed on me, so I sent away from replacement since it is under warranty... they me sent a disk of 1 TB of Nice refurbed which is half of the width of my other more old... which I thought was weird... but I installed it anyway... I ran the cd HP 3 recovery al was going well until he went to complete your installation of windows... and then I got an error message saying: could not complete my installation of windows... Please reinstall windows... I was stunned... Ive replaced maybe 4 or5 readers in my time and I've never seen elsewhere... so, I read somewhere to disconnect printers and GPU and nothing that I did this retrial and same issue... so I went diggin' autour and found an article stating that more old CD of HP recovery do not allow some drivers be installed on recovery as what the new style HD session require... and skip this premise I ended up finding a few articles more where people have said the same thing...

  So im at a loss for why the recovery CD don't work... someone knows if there are more recent style recovery CD that work with the new drives? Ive read some forums of HP where others had the question and have had mixed responses from HP support a tech saying they had to buy all new recovery CD, while the other tech said a customer they should improve their OS... I guess that I wouldn't mind upgrading to Win7 from my vista home Prem 64 I hear win 7 is better... but i only run 4 gig of ram so win7 would go on my computer?

  Also if there is a new hard drive in style... What's the beef with them? What makes them so different for older... Unfortunately with this being a holiday weekend im GROUND on get ahold of Seagate... so im stuck waiting til dec 1 Monday to get their hands on them... but I was hoping someone could find it and give me some ideas...

  Thank you

  Starbuxx

  Hello

  Run the hardware BIOS diagnostic and make sure that your PC is OK. Check with Seagate and be sure that the hard disk that you received is not a drive hard format advanced, because these types of discs will not work with former HP recovery programs.

  If your PC does not have BIOS version 5.32 or superior and a 7 GB or more then remove some DIMM memory in order to reduce the total less than 7 GB.  You can install the latest BIOS updates after the recovery of your PC.

• Window XP service pack won't complete installation

  My computer did an automatic update during the night and got stuck there, so I turned it off, when I restarted I got was the initial start-up and Windows XP is still trying to load the program.  When I went to the F2 option, I did a defaul restore and the computer flashes a blue screen for about 2 seconds and then go back to the Windows loading screen. How can I fix?

  Closing manually a computer, though sometimes necessary, is never recommended. This is especially true when Windows updates are installed and/or configured after installation.

  Follow the instructions below. If you don't have a disk of Windows Xp download the Recovery Console Windows Xp from HERE.  Then, follow the instructions HERE to burn the iso file to the Recovery Console Windows Xp you just download (although the article deals with the Windows 7 repair disc, the burn process is identical).

  1. Insert the Windows XP CD in the CD-ROM drive and restart the computer. If you are prompted to press any key to boot from a cd do;

  2. when the "Welcome" screen appears, press R to start the Recovery Console;

  3. If you have a dual-boot or multiboot, select the installation that you must Access from the Recovery Console.

  4. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER;

  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k). Let the scan until the end. It may take some time to complete.

  Post back after you complete these steps.

• Windows 10 won't complete installation

  So, I finally started to install Windows 10 through Windows Update, but the first time I did, download he got 78% full. But rather than continue the download, it stopped there and that message says, "10 Windows could not be installed. He also gave me the 80072F78 error code. I tried several solutions and tried to re - download as many times, but each test gave me the same result as before. I just heard on the. ISO file to install it, but I don't know if it will keep all my files if I did like that. I really want to upgrade to Windows 10, and I hope you can help me with this problem.

  Using the ISO method keeps your personal files, applications, and the default settings.

  You can think to choose the option to keep personal files only.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Photoshop Elements 12 won't complete installation

  I had 12 items already running on my machine. I just upgraded the hard drive and I am in the process of resettlement. My version is an upgrade to V11. This properly installed and is running. When I try to install V12 it goes right to the end and install an icon on the desktop and then just runs. I left for 3 hours and it will be not yet finished installing. Any help please?

  Thank you

  Try to install from a different source using the link below for the free trial version. After installation, you can validate the product with your serial number. Some users find this download method more intuitive than the method using a DVD or Akamai. After clicking on the download button, you start by download/upgrade to update Adobe Download Assistant. Then select the product PSE12 and start the download and installation.

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=us&PID=2159997

• Windows 7 Ultimate 64 bit version won't complete installation

  This one is makes me crazy, everything first, here are the specs of the system on which I'm trying to install Windows 7 Ultimate 64 bit version:

  Core 2 Extreme QX9650

  Gigabyte GA-X48T-DQ6

  Patriot Viper 4GB DDR3 1800 Dual Channel Kit

  Gigabyte GV - R4870X2 Radeon HD 4870 X 2 2 GB video card

  Zalman 850W PSU

  1 WD Raptor HD 320

  WD 640GB HD 1

  Now the problem, I had been running Vista Ultimate on the above system and I built a new system I put Windows 7 64 bit on and I liked it well enough to spring for another copy of the 64 bit version of Windows 7. I backed up all my files on an external hard drive and put it on the side to ensure the guard. I then install the new OS of all wipe out to get a clean installation fee. Everything was moving along fine until it came to the point where it was finished installing where it seemed to hang for a while but it was finally restarted, but from there he should have me screens for the key code and my info to enter but I got was a black screen and yet my cursor was there and I could move around. I waited a bit and nothing past that was far from the ease with which it is installed on my new build. I restarted and it took me to the screen where you can choose to start windows in safe mode or normal mode, I tried both ways. Only, he went up and then stopped. I thought that maybe I had a damaged disc, so I got out my new computers Windows disk to see if it would install and I thought that if that was the case I had a damaged disc, but he did the same thing as the disc I tried first. Then I went back to my Vista disk and this 'thing' installed as there was nothing for her. Needless to say I'm stumped on this one.

  Any ideas on what I should try next?

  I should have gotten back sooner, but I finally got the problem fixed. I went to a new ATI video card a 5500 series and Windows 7 installed without a hitch. I downloaded the latest driver for cards in time, and it has been fine since. I hooked it up to my HDTV via a HDMI cable, so I can watch the DVD and Blu - ray movies. It works like a charm. Problem solved.

• Adobe Pro 10 update won't complete installation

  Hi - I have 10 Pro and whenever you are prompted to try to install the updates.  I fell for almost a year now.  The installation process gets to a point in the registry key where it just stops.  It does not give a code or an error message, it just freezes.  We have uninstalled and reinstalled the program several times and nothing has helped.  What should I do?

  I wasn't able to access the same with your link.  But!  I googled real enforcement until something gave me the 10.1.4 extension and I was able to get it downloaded from this research.  I really appreciate your help.  Happy Friday!

  Thank you and have a wonderful weekend!

• App won't complete installation

  Thus, it has been a long time, but last year I put our catalog upward in iTunes, so natually this year I'll try to update. I've been through the same steps in the step by step guide to creating an application. And until the DPS App Builder creating the app, it seems to go well. After downloading the developer application, add to iTunes and is trying to install on an iPad are where I'm having problems. It never ends install. I rebilt the app twice and I still get the same problem. Installation of the circlw progress goes for about 3/4 of the way, then disappears and the app remains in "Setup" mode. An idea on what I could try would be greatly appreciated! Could it have something to do with the provisioning profiles or anything? I thought that I could ' t go as far as DPS building the app if these files were incorrect.

  Thanks for any help!

  Amy

  Your distribution needs profile updated, re-downloaded and included - to use the same certificate that your .p12 is created from provisioning.

• Downloaded the dmg of creative cloud and clicked to install, but it won't complete installation

  The installation ran almost until the end, but bar has not moved in a long time and will not cancel.

  Adobe Creative cloud application is only compatible with the Mac OS X 10.7 and above versions.

  However, as an alternative you can install and use Adobe Application Manager and install applications CC,

  See the link below:

  System requirements | Creative cloud

  Also, you can see the upgrade guide:

  Apple - OS X Yosemite - How to Upgrade

• How to remove network drives mapped Windows 7.i can't get to delete.pls help me to solve it.

  How to remove network drives mapped Windows 7.i can't remove. Already disconnected, but still its disk showing with red cross.i am not able to create new drive with the drive letter of Red Cross, pls help me to solve it.

  1. open a command prompt.

  2 in the command prompt, type the following command and press ENTER.

  NOTE: replaced by z: in the command below with the actual drive letter of the mapped network drive that you want to cancel your computer window (deletion) mapping .

  • NET use Z:/delete

  3 when finshed, close the command prompts. So the mapped network drive shoud be removed from the window of your computer.

  Kind regards
  J Chambers

• HP Envy 14-J009tx: updating the Nvidia driver is blocked?

  So, I bought this laptop last month, and I tried updating the Nvidia graphics driver for the last of the 347.52 version supplied with it. I opened the GeForce experience app to update, it tells me that it is impossible to connect to Nvidia. Not still even though I changed my home network to the endearing phone, it won't let me update, saying that it cannot connect to Nvidia and I should try again later. I also checked the firewall and AVG (I changed the antivirus immediately after purchase) and allows the application to access the internet.

  So my question is: is it done deliberately by HP or there may be something wrong with the whole of my ISP? And besides, I am interested in upgrading to Windows 10, will there be any problem with all the app that requires Nvidia? I really need the graphics I want to do a lot of CAD in the future.

  Thanks in advance.

  Hello MalvinVVV ;
  
  Let me welcome you on the HP forums!
  
  I read your post on Nvidia driver update and I wanted to help.
  
  It's generally a BAD idea to update the video drivers laptop NVIDIA (or AMD) because the OEM manufacturers often use specialized versions of video chipsets for which these pilots are not suitable.  The best approach is to update only from the OEM drivers.

  This link is to HP for your PC product page: http://support.hp.com/sg-en/product/HP-ENVY-14-Notebook-PC-series/7771343/model/8524508/drivers

  If you press the check now button, he will see if there is new video HP drivers for your PC, download and install them.  If there is no newer drivers, I would leave it alone.

  In addition, I checked the same page to see if there are drivers HP Win10 and there are.  So, if you decide to upgrade to Win10, you will be able to get drivers HP.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• How can I load it drivers for epson stylus tx117 pls help

  where can I to load a driver for epson stylus tx117 pls help me tnks

  where can I to load a driver for epson stylus tx117 pls help me tnks

  Go to the Epson website and check there to see if a driver Windows 7 for there. If so, it download and install it.

• Pavilion DV9008DR Nvidia coprocessor SMU driver won't load

  After finding drivers almost everywhere, I met several for the 340 Nvidia nForce / GeForce 6150.  Some are for Vista (from HP), a set for Win7/Vista from Nvidia itself.  All have one thing in common.  The 'coprocessor' remains 'driverless' after the Nvidia installer is done.

  Looking at the PCI device ID, is seller 0x10DE (NVidia) device x 0271 coprocessor (nForce System Management Controller).

  The driver load without difficulty in XP, but the updated driver won't Win8.

  A thought has this load manually through Control Panel Device tool as an update of the driver selected with its .inf file.

  It is a driver that this continues to be a complete installation.  If it will not charge, what will be missing.

  Dan-

  I do not quite know compatibility mode, but I've done the following with the NVidia 15.49_nforce_winvista_win7_32bit_international_whql.exe driver package that is very similar to sp36079.exe

  1. launch the .exe.  As before, it loaded everything except the NVidia coprocessor driver.

  2. went to the Control Panel Device Manager

  3 find the coprocessor and went to properties-> Driver-> update driver.

  4. browse for the file SMU in the .exe 'burst' (including the .inf, .cat, .sys, etc.

  5A accepted.

  6. received the message that this driver installed.

  7. looked in Systedm devices and found nVidia nForce PCI System Management.

  8 looked the driver version and found it wasn't NVidia, but Microsoft, Date of 06/21/2006 driver Version 6.2.9200.16384

  If something happened, but no idea what it means.  (maybe the driver was already there, but need to Win8 "inviting them to find it?)

• I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!

  I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!

  Please tell us how wipe you the drive and how you tried to reinstall OS X. And what was the error, and how he help you trying to reinstall OSX again? You can look at writing an effective communities of Apple support question before you answer because we are not spirit or psychic readers.