NVIDIA GT 630 m not switching or working in HP dv6 7010tx! ?? Help?

Similar Questions

• NVIDIA GT 630 m not switching or working in HP dv6 7010tx?

  Got the DV6 new 7010tx and it seems switchable Nvidia graphics is not at all even when the laptop is on the mode of high-performance switching and even tried to place profiles for apps, still no.... what to do? ! Help?

  Its market not now

• I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel?

  I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel.

  Hi Liz L,.

  You can try to run the printer Troubleshooter and check.

  Printer in Windows problems

  You can also check out the following link to add the printer.

  Add or remove a printer

  Hope this information is useful.

• I have a pavilion dv7 7000. I want to change my card to default chart to 630 m not intel nvidia gc.

  I have a pavilion dv7 7000. I want to change my card to default chart to 630 m not intel nvidia graphics HD 4000.

  Hello

  Go in the NVIDIA Control Panel, and then select manage 3D settings.  Now, click the global settings tab, and then select it Auto drop down. Now select processor High Performance NVIDIA.

  The drawback with the above is that you will consume more energy and your system can run on battery as long. An Alternative is to select the program tab and then just add the program you want to run on the processor performance, NVIDIA.

• My nvidia graphics card does not work when I install microsoft visual stedio

  as say the title my nvidia graphics card does not work when I install microsoft visual studio 2013
  How can I stop this from happening

  We know what to do?

  Yes and Yes, but it's good for now
  I restore the Windows STILL and installation of visual studio without emulator windows 8.1 phone

  and it worked

  Thanks for the reply.

• NVIDIA GT 630 M is not updated in Pavillion dv6 7010tx

  My laptop is Pavillion dv6 7010tx

  NVIDIA GT 630 M is able to search the new updates, but after downloading the update, it's not recognizing the Driver.I checked that all the drivers are properly installed.

  Hello

  Latest version of the driver for this model, that you can download here (ver. 295.93).

  Note:

  Remove all previous versions of the NVIDIA graphics driver before you install the latest version.

• Satellite A-C50-1DN - Control Centre of Nvidia's Win7 can not find material

  Hello

  I changed the Win8 to Win7 and everything works fine.

  But I can't get the graphics card from Nvidia to run. I downloaded the driver from the Toshiba page and I can install it without any problem.

  But if I start the Nvidia control center, it tells me that it cannot find any Nvidia hardware.

  The windows Device Manager tells me that the driver of a 3D-Videocontroller is missing.
  But win7 can not install it automatically.

  Can someone help me solve this problem?

  Best regards
  Olum

  > But I can't get the graphics card from Nvidia to run

  Sorry mate but I put t understand it. You said that the nVidia display driver might be installed correctly without any error message.
  You can what entries see in device-> graphics card Manager

  The laptop supports the NVIDIA® GeForce® GT740M w / Optimus (this is an external chip). The device supports also the internal Intel HD Graphics 4000 (this GPU Intel is part of the processor Intel CORE I3 - 3110M)
  The two cards (nVidia and Intel GPU) must be listed in the Device Manager.

• I have a hp photosmart c6180 all in one. for these last days, it does not switch. ins

  I have a HP Photosmart C6180 All in one.  For these last days, it does not switch. When I insert colored part of the cable into the printer then led on the cable is cut, that's why the printer does not illuminate.  Please let me know what could be the problem.  I thought that the cable may be defective, so I bought a new cable, but the printer does not work.

  Hi rajeshgaur,

  You can call our support lines to check if the printer can be repaired and how much he would run to fix the unit. The other option you have is to contact support and check in the trade trade program.

• Why my computer keep stop inadvertently with this message: address a problem with the NVIDIA Graphics Driver__NVIDIA graphics driver has stopped working properly. ? __

  Recently my computer (laptop) was stopped when I put the command "sleep".  It displays a message about my NVIDIA Graphics Driver does not. I have check the driver to use and it shows like th emost current and NVIDIA hardware works correctly... who is not lying.

  A recent Microsoft update would be the cause of this problem suddenly?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• PowerConnect 6200 ACL does not seem to work

  Hello

  I have a total of four 6248 s two groups at different locations that are configured with VRRP + OSPF.  I tried to set up a simple ACL on either a VLAN to allow a portion of the traffic and block everything else, but I can't make it work.  I have tried many combinations to try to get this working, but so far without success.  It's just a simple ACL, which should allow the web/http traffic on the 10.1.30.100 server and blocks everything else.

  The only type of ACE that seem to work are either a "deny ip any any" or "permit ip any any" If you try an ACE with a destination host and subnet mask 0.0.0.0 it's just all this blocking.  Has anyone else had problems of the ACL or is it just my incompetence in preventing me from getting the 6200 ACL work properly?  I didn't have this problem, get the ACL list to work on our Cisco 2811 routers, just at the moment where I tried on the PC6248s.

  1. config
  2. int vlan 720
  3. no ip-group vlan720-in in access
  4. output
  5. No list of access-vlan720-en
  6. access-list vlan720-in permit tcp any 10.1.30.100 0.0.0.0 eq 80
  7. int vlan 720
  8. IP access-group vlan720-in in
  9. output
  10. output
  11. copy, run start
  12. There

  Just an update on this issue.  I worked with Dell to determine why the ACL does not seem to work.  We discovered that the 6200 apply ACL to the traffic as a VLAN ACL Cisco card as opposed to a router ACL entry.  This causes the ACL to apply to not only routed or transferred but also traffic switched in the same VLAN.

  This has been the source of my problems that my traffic is not limited to a single 6200.  I developed a simple laboratory to check that the 6200 applied traffic switched in the same VLAN ACL.

  First the 6200 has one ACL applied to VLAN5 both PC1 and PC2 are in VLAN 5.  They are both on the same subnet 192.168.5.0/24.  The ACL has a statement of "permit icmp any one" but nothing else.  The PC1 and PC2 are running Windows XP Pro with IIS is installed for the test.  The firewall on both is disabled.

  PC #1 IP: 192.168.5.2/24
  PC #2 IP: 192.168.5.3/24

  [6200]
  |    |
  |    |
  |   [2950T #2] <-->[PC #2]
  |
  |
  [2950T #1] <-->[PC #1]

  In this scenario PC1 and PC2 can ping each other without problem because of the permit icmp any any statement, but you cannot access the IIS site on each of the other computers.

  Dell said that this is normal and if you want communication VLAN VLAN you 'license ip ' to make it work properly.  I also found that traffic back from other VLANs were also denied because of the ACL applied on all of the incoming traffic.  As a solution, the license statement should be included for ALL traffic back to the limited subnet other subnets.  So in this case "ip enable any ".

  I find it a bit annoying that ACL is applied in the form of maps of VLAN not like real incoming router ACL as they are on similar Cisco devices as the 3750.  So there is a work around.  I hope they can solve the problem in a future update, because I really think that the 6200 is a great device.

  Here you can see the difference between VLAN ACLs cards and router entry ACL where they are applied in what concerns local traffic to VLAN.
  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3750/software/release/12.2_25_see/configuration/guide/swacl.html#wp1572522

• NVIDIA GPU driver does not show up after accidental uninstall

  I accidentally uninstalled My Nvidia driver for my GeForce GT 540 m GPU. I uninstalled it completely in the Panel.

  I have an Acer Aspire Timeline X 3830TG.
  Now when I go to the Web from Nvidia site and download the program of installing the driver, the error appears "Install cannot continue: this driver could not find compatible graphics hardware." The same goes for when I go to the Acer Web site and try to install the drivers for my model of computer, the same error occurs. I've spent hours Googling and solve this problem, but so far I've succumbed. When I go to my device manager and click on display devices, only my driver Intel HD comes and my Nvidia it is no where on the entire list. Also, I tried to restore my computer to factory conditions and who still do not download, System Restore is not an option. I don't know what to do and I really need to have my Nvidia GPU works once again, somebody please help me.

  It would seem that you have a hardware problem

• My map of 3000 - x 11 network of Satellite do not seem to work at all

  I had recently a 3000 - x 11. It is original, network card do not seem to work. The guy who originally purchased the laptop told me he has never managed to make it work! The modem works fine however. The rj45 port seems ok.

  However, I have a LAN connection if I use an external network card. I start wondering if this laptop has had an original card mounted inside network. This laptop was purchased at the end of 2001. When I plug a cable in there, there is no light next to the rj45 connector.
  Is there a way to allow the original card or something?
  Any ideas anyone?

  Hello

  I found the info that this device has no LAN card and you must use an external.

• Z500 touchpad work not when you use the keyboard. Please help me please!

  Hello

  I recently bought a lenovo z500 and it's great, but I have a little problem. When I use the keyboard to play games (I use the WASD keys) the touchpad does not, which means I can't play. Help, please!

  I got it finally started working by removing the pilot of the momentum. I don't think that I will reinstall it. Thanks for your help

• Error message Microsoft Word "Word could not create the work file. Check the amount of disk space on your startup disk. »

  I have a MacBook Pro, retina 13inch OS X el Capitan Version 10.11.1 with 16 GB of memory. It's brand new and I have recently installed Microsoft Word/Powerpoint etc. a disc that I bought a few years to my previous MacBook. It seems to work very well, but whenever I want to open a word document a message comes up saying "Word could not create the work file. Check the amount of disk space on your startup disk '. However, once I click 'OK' this message disappears and my word file opens without a problem. I have 16 GB of memory on this laptop and it's new I have not reached anywhere near the maximum amount of storage so I'm puzzled as to what this message means. How can I avoid that this message popping up everytime I open Microsoft Word? Any help would be appreciated!

  This has nothing to do with memory - it's the SSD. Word tries to create a temporary file to use as a backup if the program crashes while you are working. First, run the Microsoft Update program to see if there are updates you have missed. Second, Microsoft currently supports only versions 2011 and 2016, so if yours is older, you should consider the upgrade. Thirdly, I suspect that the temporary file is not get created so that you have fewer cancellations (maybe any) and that if the program crashes you have to restore.

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032