O2 test software update

Similar Questions

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• MS11-057: a security update Cumulative for Internet Explorer 7 for Windows XP (KB2559049) + software updates fails SCCM

  Morning Microsoft,.

  I am facing a problem in my office environment (Windows XP SP3, Internet Explorer 7, software Trusteer report is NOT installed). We are trying to deploy a package to update all the post-SP3 XP critical and security patches and have problems with the update above.

  We use the SCCM synchronized with our server WSUS software update to deploy updates and it works very well in most parts.

  However this particular update appears to install (that is listed in Add/Remove Programs) However whenever the client checks for updates Windows he sees this as available, download, try to install it and indicates that a reboot is required... After a reboot, he's stuck in this cycle, each time that the client checks a Scan software deployment.

  It was on our test PC at the moment we have so removed from our upcoming updates and aboard. Everyone knows this and they can advise?

  Here are some excerpts from a newspaper of the customers on the update of the files

  WUAHandler.log (ignore the stop bits listed here update that installs very well)

  Async completed research.    WUAHandler 29/08/2011 09:55:58 6128 (0x17F0)
  Successfully completed the scan.    WUAHandler 29/08/2011 09:55:58 1788 (0x06FC)
  Go to search using the WSUS update source.    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
  Synchronous looking for all the updates started...    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
  Synchronous successfully looking for updates.    WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
  1 update: 5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
  Update: dfec6275 - 7 d 47-4da6-bcee-d4f20e57acee, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
  2 update: 5f08af04-7832-452f-9206-4289ed36f1b4, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
  Update: a9278996 - 22 c 7-4f60-9bd3-540d291c4bfd, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
  1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB980182) (5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
  2 update (Missing): update rollup for the ActiveX for Windows XP (KB2562937) stop bits (5f08af04-7832-452f-9206-4289ed36f1b4, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
  Async updates installation has begun.    WUAHandler 29/08/2011 10:06:10 6032 (0 x 1790)
  Update 1 (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) completed the installation (0x00000000), reboot needed? Yes WUAHandler 29/08/2011-10:06:34 6060 (0x17AC)
  Update 2 (5f08af04-7832-452f-9206-4289ed36f1b4) completed the installation (0x00000000), reboot needed? No WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
  Async completed installation.    WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
  Installation of updates is complete.    WUAHandler 29/08/2011 10:06:43 3184 (0x0C70)
  Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:06:43 6032 (0 x 1790)
  Async completed research.    WUAHandler 29/08/2011 10:07:51 5740 (0x166C)
  Successfully completed the scan.    WUAHandler 29/08/2011 10:07:51 4644 (0 x 1224)
  Update (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) has completed the restart of the post operation. HResult: 0 x 00000000.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
  Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
  Async completed research.    WUAHandler 29/08/2011 10:40:29 3628 (0x0E2C)
  Successfully completed the scan.    WUAHandler 29/08/2011 10:40:30 5636 (0 x 1604)
  Go to search using the WSUS update source.    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
  Synchronous research began using the filter: "UpdateID ="7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe"AND DeploymentAction = *'...»    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
  Synchronous successfully looking for updates.    WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
  1 update: 7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102 BundledUpdates: 1 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
  Update: a7c0649d-f81c - 40 c 1-b247-b4e6bb990c8a, 101 BundledUpdates: 0 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
  1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB2559049) (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102) WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
  Async updates installation has begun.    WUAHandler 30/08/2011 09:27:15 3848 (0x0F08)
  Update 1 (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe) completed the installation (0x00000000), reboot needed? Yes WUAHandler 30/08/2011 09:27:39 1656 (0 x 0678)
  Async completed installation.    WUAHandler 30/08/2011 09:27:39 5840 (0x16D0)
  Installation of updates is complete.    WUAHandler 30/08/2011 09:27:39 3848 (0x0F08)

  It is a forum for specific consumers. You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

  =======================

  You can encounter errors related to connect temporary [p. ex. 0x80072EFF; 0x80072EFE;] 0x80072EFD; 0x80072eef; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0X8024402F; 0x800705B4] when you use Windows Update or Microsoft Update [but not necessarily WSUS! ]  to install the updates
  http://support.Microsoft.com/kb/836941

• Windows 7 photo viewer broken by the software update of Intel Corporation display published February 2012

  I tried the optional "Corporation - display - Intel (r) Intel's HD Graphics" offered by Windows Update.  The patch installed properly.  I also installed all the patches from Microsoft in the most recent update at the same time - my system is up to date with all patches from Microsoft for Windows 7.

  The Intel driver is identified as "Display Intel Corporation software update released in February 2012" with driverid = 20470193 (but doesn't link to winqual included).

  After I rebooted the system, I noticed that the Photo Viewer Windows 7 (Microsoft utility provided for the display of image files) was broken.  It would display usually several images, but after a few, trying to go to the next image would cause him to hang, with an error message and an error logged in the system log files.  The error logged has this information:

  Log name: Application
  Source: Application error
  Date: 14/03/2012-16:14:01 (typical, I have hundreds of this recorded error)
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: hp-8200
  Description:
  Name of the failing application: DllHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bca54
  The failed module name: igdumd64.dll, version: 8.15.10.2653, time stamp: 0x4f3aac44
  Exception code: 0xc0000005
  Offset: 0x000000000030eb06
  ID of the process failed: 0 x 1284
  Start time of application vulnerabilities: 0x01cd021efd7da64e
  The failing application path: C:\Windows\system32\DllHost.exe
  Path of the failing module: C:\Windows\system32\igdumd64.dll
  Report ID: 3cc05019-6e12-11e1-8a89-2c27d725ab74
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      15411
      Application
      HP-8200
     
   
   
      DllHost.exe
      6.1.7600.16385
      4a5bca54
      igdumd64.dll
      8.15.10.2653
      4f3aac44
      c0000005
      000000000030eb06
      1284
      01cd021efd7da64e
      C:\Windows\system32\DllHost.exe
      C:\Windows\system32\igdumd64.dll
      3cc05019-6e12-11E1-8a89-2c27d725ab74
   
  

  The failed igdumd64.dll DLL is part of the Intel driver patch.

  I was able to revert to the version of the prior pilot with no problem using Device Manager (you cannot remove this hotfix with the usual methods to remove a patch provided by Windows Update, because it's a device driver).

  Once I have returned to the older version of the driver (with the old DLL) flaws with Photo Viewer problems went away.

  I don't use many intensive graphics applications, but I would not be surprised if this driver breaks things.

  I can't find any documentation on what, if any, problem known this updated driver is supposed to fix.  But he clearly presents problems that did not exist with the driver components, it replaced.

  I fully understand that driver development is a challenge, but this driver was clearly not enough tested if it succeeds in breaking simple things like photo viewer.

  The driver in question is provided by Intel and the same update available on their web site.  I could certainly follow your collective advice and completely uninstall the graphics driver (which unfortunately would my system using generic VGA graphics, completely ruin my desktop display) and then download the driver from the Intel web site, but I sincerely doubt that the outcome would be different.  Returning to the already installed driver seems to have "fixed" the problem with the update.  And I scored the driver Intel "fix" hidden in Windows Update, so that I won't be tempted to install again, since it's apparently a bad solution to a problem not specified.

  For what it's worth, the system in question is a HP Compaq 8200 "CMT", which has a motherboard Intel manufactured with integrated graphics Intel hi-def.  I don't have a graphics component snap.  Graphics drivers who settled on the system worked fine for my needs.

  Intel has released an updated version of this driver in February 2011, which, at that time, caused a wave of reports (many of them in this forum) driver Internet Explorer 9, in break with defects occurring all the same Intel supplied DLL. The driver that came with my system seems to have had this problem.

  If I was smart enough to understand how to report directly to the Intel they gave Microsoft a bad driver, I would, but as the component that is broken by the pilot part of a standard software for Windows 7 from Microsoft, I chose the problem here.  I'm sure that most of the Windows 7 users that could see a similar problem will seek a solution here, and for me, the solution was to return the driver (using the same procedures that were presented as the solution to the previous February 2011 broken Intel HD graphics driver "fix").

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Software update 10.0.2

  I downloaded and installed the software update 10.0.2 for my phone this morning and HE HATES! Why Apple does not provide a way to uninstall the update, as an option for pc Microsoft System Restore?  Either that, or allow users to get an overview of what changes are coming, so they decide if they want to install or not?

  What problem do you have? Maybe we can help you to solve. In fact, the new update is good, you just need to get used to it.

• I don't want to install iOS10 on my iPhone. How can I get rid of the notification of the software update

  I don't want to see the software update on my phone all the time.  If I don't want to update the software, is there any way to disable these notifications?

  Hi akathyb,

  Ad https://www.igeeksblog.com/How-to-Remove-Software-Update-Download-from-iPhone-IP.

• my whole macmini is glitching since software update

  Is someone of other bugs knows after software update?

  Sometimes incompatible software by an older system, slows down or

  does not at all in a newer version. It's between the source of a

  question as you describe in a general way.

  And elements sometimes people mistakenly think will help their Mac

  will do damage to the file system, break the macOS and ruin the apps.

  A fairly general topic. You have specific instances or evidence of

  concept, or examples of the question, that you can find a problem?

  The details are important. However something as simple as a list of the

  configuration and software/hardware of your Mac database specifications

  can be useful. You could read http://etrecheck.com/#about and see

  If the report, it can generate can be useful; If post you here, some

  One can read through to see how that may contribute to your problem.

  A new browser or upgrade update can sometimes a specific

  problem; I have a few different Macs with different ages of macOS X.

  So, I see a variety of issues; some of them have been resolved in more recent operating system.

  But do not expect a problem to be solved through upgrade, usually

  What is happening is a problem older or incompatible software

  postponed to poison the poor macOS in a more recent interpretation.

  This is because an upgrade to the existing system has your old

  user account and everything you have installed may be in the Mac still.

  I hope that you have a stern conversation with this Mini and say

  him to straighten out and fly right. In the meantime, the system connects

  and other elements may be able to point to a cause. Problem with log

  files, many people do not understand most of the content. Me too.

  In any case...

  Good luck and good hike!

• Opt out of the beta program (gene software update)

  Hello.

  I participated and enjoyed the public beta of macOS 10.12 Sierra program, but now that the commercial version became available I would go instead to the mainline.

  This morning a public beta of 10.12.1 appeared in the software update.

  Then I went into settings > App Store and disabled the software version beta well rested: the proposed update is still there.

  I went into/private/var/folders/zzz and nuked the content, and updated: the proposed update is still there.

  So I rebooted, and refreshed the App Store new update: and of course, the proposed update is still there.

  How can I get rid of that but make sure I will be alerted when the final version of 10.12.1 is available?

  Or I'll have to live with it and be careful of never clicking on "update all the ' ever?

  Thank you.

  Open the App Store > bought. Find the right purchase of Sierra Beta then control-click / in the white space of his rank and choose hide purchase.

• will not appear 10 under software update iOS.

  When I go to software update, it says that my iOS 9.3.5 is up-to-date. It does not show same iOS available 10. What should I do?

  If you have the iPhone 6, connect to Wi - Fi and wall power supply.

  Make one

  Force reboot

  http://support.Apple.com/en-us/HT201559

  Then try again.

• My iPad air2 will not charge after the software update

  My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

  It may take 30 seconds

  See you soon

  Brian

• iTunes does not appear the option to check the iOS Software Update

  I have a 6 more than 64 GB iPhone with iOS installed 9.3.5, laptop HP Windows 7 (SP1). The latest iOS updates bit (of IOS 8 or 9, I did "over the air" rather than connecting to iTunes on my laptop.)

  This time, with 10 being released iOS and reading online on a certain number of iPhones in 'brick' update 'over the air', I decided to update by connecting via a USB/lightning cable to my laptop and iTunes.

  When you open iTunes on the laptop by clicking on the device (iPhone) and the 'summary', she properly showed the current software on my phone (iOS 9.3.5), but no option for "check for updates". He also says "Connect this iPhone with a USB cable in order to update or restore it is a software", which seems strange, because it is connected via USB and is recognizing the version of iPhone software up-to-date and correct. After not being able to understand why, I have found also that iTunes 'control upgrade' says that v12.1.1 has been current. After some research online, I came across a Web site that shows iTunes was up v12.4.3 at the time of writing. Therefore, I went on Apple's site to update iTunes, as I couldn't do to in iTunes itself. I found that the latest version is 12.5.1.21 I downloaded and installed (without uninstalling the previous version first). Still the same problem. Then, I uninstalled this version latest and updated to iTunes on my laptop and reinstalled. Still the same problem.

  I was able to 'Sync' and the phone to iTunes with no problem at backup.

  Can anyone help please?

  Post edited by: colboy58

  I considered just take a chance and update the iphone software app 'Settings' of the phone with the ability to do a "restore" via iTunes on the laptop if I ran into problems. Then, however, I found that the button "backup restore" in iTunes was "greyed out" and not "clickable".

  Hi colboy58,

  Thank you for using communities Support from Apple!

  If I understand your message that iTunes appears that a software update is available for your iPhone 6 Plus. Since iTunes showed previously that it was also updated, there is probably a problem with the security on your PC iTunes software to communicate with our servers.  Please follow the troubleshooting steps in the link below to get started:

  Solve the problems between iTunes and third-party security software

  Take care.

• My iPhone does not appear more than 6 iso 10 under software updates. I don't have a computer with iTunes. What should I do?

  MY Plus 6 iPhone does not show the new 10 software iOS to the title of the software update. I don't have a computer to iTunes. What should I do?

  Try leaving it plugged in the power of the day after. The servers are probably very overloaded. I have not being updated myself but will be soon.

• Look at the os 3 not appearing is not in my day before software updates

  Look at the os 3 not appearing is not in my day before software updates

  Hello

  You must first upgrade your iPhone to iOS 10.0.1:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Then update your watch:

  • Update the software on your Apple Watch - Apple Support

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.