OBIEE 11 g: report not displaying not lines maximum per page

Similar Questions

• Data merge, its is possible to display the 5 records per page?

  I have no problem doing mergers of data.  Still, they seem to only show only one record per page, but is there a way to display multiple records per page?

  Read the help for an explanation full, then come back here with specific questions if you still have problems...

  Basically, set you up a single instance of the placeholders field on your page, then select several records per page in the merge options. You cannot specify a number directly, but ID will be reprduce as many records on the page all items using the spacing settings you set up, then you want to add an empty block size required to get your five instances with zero spacing and group them with field labels.

• Increase the number of records per page in obiee 10g

  Hello
  
  can someone tell me how to display multiple records per page in composed fashion, the default value is display as 25 records per page.
  
  Thanks in advance.
  
  Chak.

  Hello
  You can reach answres report itself increase line display more thn 25 records per page (it has custom one you can set special report)
  steps: edit answres report you go to your table table properties / pivot--> there is an option called display line by the option of the page here, you can define it.

  medium default setting: this will affect any obiee report.

  If you want more as update the code below into you instantiate config.xml file, after that restart all services of bi.

  
  1920000
  30
  1000
  64000*.
  25
  64000*.
  75
  64000
  fake
  
  

  
  1920000
  1000
  64000*.
  25
  64000*.
  75
  64000
  

  http://obieeelegant.blogspot.com/2011/06/exporting-in-Excel-to-download-more.html

  Thank you

  Deva

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Substitution strings do not fill in report models > header > before lines

  I'm unable to use the substitution string in report models > header > before lines

  < border tr = "1" >

  < class th = "header" align = "center" colspan = "2" > < /th > SYSDATE-3

  < class th = "header" align = "center" colspan = "2" > < /th > SYSDATE-2

  < class th = "header" align = "center" colspan = "2" > < /th > < /tr > SYSDATE-1

  I need to use something like below

  < border tr = "1" >

  < class th = "header" align = "center" colspan = "2" > & SYSDATE1. < /th >

  < class th = "header" align = "center" colspan = "2" > & SYSDATE2. < /th >

  < class th = "header" align = "center" colspan = "2" > & SYSDATE3 < /th > < /tr >

  SYSDATE1

  SYSDATE2

  SYSDATE3 are elements of my page.

  Version: Apex 4.2

  Theme: Red Simple

  Report model: Standard, change the line colors

  Report type: report Classic

  Is it possible to use these elements in the specified model?

  Thank you

  Chauvet

  The ampersand/dot substition works in report models. https://Apex.Oracle.com/pls/Apex/f?p=3568966:1

  Maybe the page item values are not saved in session state, before the report is rendered.

• Compare the report not showing the changes

  I modified an app engine select commenting on a line. I then did a report compares against a database that do not have the code

  

  The comparison report shows no difference between the two DB

  What Miss me?

  

  If you change only the SQL, then you need compare SQL objects. The report you are looking at is only for the engine program of Application objects. This will only show the changes made to the program properties (things like the records of State or temporary tables, attached to the program).

  Another report will show the changes for Application Sections of the engine, which would include things like the addition of new sections, adding or removing a step of a section or changing the properties of a step or a section.

  Also, to see changes made to the Application Engine PeopleCode, you'd have to glance at the Application Engine PeopleCode compare report (note that peoplecode types are detailed in separate reports, but all the SQL types appear in the same report).

  Kind regards

  Bob

• FRM-41219: can not find the report: not valid

  Hi am having the error when calling the report of my form in 11 GR 2 when I click the button I get this error

  FRM-41219: can not find the report: not valid

  and when I click the ok button on the error I get this error frm - 40738:Argument 1 to builtin RUN_REPORT_OBJECT can NOT BE NULL

  This is how I called the report

  DECLARE
  repid REPORT_OBJECT;
  v_rep VARCHAR2(100);
  rep_status VARCHAR2(20);
  BEGIN
  repid := FIND_REPORT_OBJECT('report4');
  v_rep := RUN_REPORT_OBJECT(repid); END;
   

  Try something like this:

  PROCEDURE TEST_REPORT IS

  Repid REPORT_OBJECT;

  v_rep VARCHAR2 (100);

  rep_status VARCHAR2 (50);

  BEGIN

  Rep: = find_report_object ('report4');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'html');

  SET_REPORT_OBJECT_PROPERTY (ID REP, REPORT_SERVER, '');

  v_rep: = RUN_REPORT_OBJECT (repid);

  rep_status: = REPORT_OBJECT_STATUS (v_rep);

  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')

  LOOP

  rep_status: = report_object_status (v_rep);

  END LOOP;

  IF rep_status = "FINISHED" THEN

  / * Display the report in the browser * /.

  WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ' |)

  substr (v_rep, InStr(v_rep,'_',-1) + 1) |'? "|' server =","_blank"); "

  ON THE OTHER

  message ("error when running report");

  END IF;

  END;

  Replace with your report server name.

  Concerning

• Insertion of multiple values in the report (not in the database)

  Hello!
  
  I have a procedure that shows example of 50 people and for each text element three different person I access values and submit to the database. There is a check box for each line. I have a selection list of Pentecost that you choose the column and a text element where you enter the value to insert. What I want to do is insert this value just in the lines that have a selected check box. I would like to insert this value just in the report (not in the database) when I click on a button.
  
  What do I have to use javascript? I really have no idea how to do that.
  
  Thanks for any help!

  This will give you an idea on how to handle the selected lines:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:95

  Other examples show how to use tabular forms.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  I am a novice and I do not talk about the web, so please excuse my ignorance!

  I content on my web pages in Muse design that descends below the visible window, but when I go to preview in browser, it only presents a preview which is visible in my window. Of course, I can press command + /, but I should be able to use my mouse wheel or my scroll bar to see the lowest content. I just can't understand how do! Is this something to do with the positions of Master Page header footer? They all look fine and normal and all the other sites I've done. In ADDITION, I checked non paged area (Mount table), and there is NO hidden content.

  I tried to move my content down (to 'wrong' it to enable vertical scrolling). I tried to move my foot higher than the content, but all useless page.

  Preview in browser = will just not scroll down.

  Hope it's a simple solution. Thanks in advance.

  See you soon,.

  I had the same problem and it took me almost 2 days to find a solution.

  See if that solves your problem (if all goes well it has been resolved since you posted).

  1. in the model Master, click on Page > Page Properties > metadata

  2. remove the small piece of code next to the body tag-{overflow-y: hidden}

  3. click on OK, then get an overview of your pages.

  

• displaying empty lines in the report

  Dear forum
  
  I have a specific format of some good consisting of a few lines.
  good report sometimes get 5 lines sometimes 8 lines, according to the transaction of such specific evidence.
  
  is it possible that I set the number of rows in the report. Let's say 10 lines.
  If indeed the good is of 5 lines, 5 other lines appear empty in the end.
  and when actually the good is of 8 lines, the other 2 rows appear in empty at the end.
  
  so that all lines displayed in right are 10. Top of page lines filled with data and other below appear as blank lines and the general format of the good looks good on a single page.
  
  
  
  
  Thank you
  
  
  teefu.
  
  Published by: user_teefu on August 26, 2010 11:32
  
  Published by: user_teefu on August 26, 2010 11:35

  SELECT deptno, ename, sal, rn, lvl
  FROM
  (
    SELECT
      deptno, ename, sal,
      ROW_NUMBER() OVER (PARTITION BY deptno ORDER BY sal desc) rn
    FROM emp where deptno=20
  ) , (select level as lvl from dual connect by level<=10)
  WHERE rn(+)=lvl
  ORDER BY deptno;
  
  20     Phoenix     5000     1     1
  20     SCOTT     3000     2     2
  20     FORD     3000     3     3
  20     JONES     2975     4     4
  20     ADAMS     1100     5     5
  20     SMITH     800     6     6
                      7
                      8
                      9
                      10
  

  Published by: PhoenixBai on August 26, 2010 18:24

• 4323-application error help did not provide a digital page ID to display help

  Apex 3.2.1 on 10Gex
  
  I followed the process set out by Kishore Ryali - on his page ([http://apps2fusion.com/at/64-kr/413-maintaining-authentication-between-apex-applications | http://apps2fusion.com/at/64-kr/413-maintaining-authentication-between-apex-applications]) when it connects several Apex applications - acting as an integrated whole. I had to create a 'mother' application that works as a point of single sign-on, and which only the page includes links to other preserved by "child." This works great - but... I get an error when you log on all applications for the child.
  
  «Error 4323-request of help did not have a digital page ID to display help for.»
  
  I don't get this upon registration of the initial application. Each of the child applications has a redirect to the login page parent as part of their process of disconnecting... and that's where I get the error.
  
  I posted this question on its page, but have yet to receive an answer.
  
  All the ideas of this group who could point me in the right direction?
  
  Thank you
  
  Rich

  Rich

  I don't know exactly what is happening here. However, you can check if the problem that is described in this article apply to you Re: error 4323 on help text box

  You can try to remove the ': LOGOUT' of the "logout url" and see if that makes a difference

  CITY

• Number of lines displayed per page in an interactive report

  Hello
  
  I would like to know if it is possible to change the values of the selection list called "Rows" in an interactive report (which is displayed in the search bar).
  Indeed, I want to display 16 lines per page, and I can only choose from the values 1, 5, 10, 15, 20, 25, 30, 50, 100, 200...
  Thank you for your response.
  
  Emilie.

  Hi Emily,.

  Go to: Home > Application Builder > application 301 > Page 51 > report interactive attributes > Search Bar > lines per Page selector

  Remove the check mark and the line selector disappears.

  Greetings,

  Tobias

• Does not display do not properly on the page linked to numbered list

  I have a page where I placed numbered elements (instructions 1, 2)  Notice..., etc.). When I preview the page in RoboHelp 2015 the numbered list with numbers and everything seems good. When I view the output from RoboHelp file, the page with the numbered elements seems well. I inserted a hyperlink to this page (page A), another page (page B). When I click on the link to the page from page B, do not all numbers in the list on the page.

  The numbered list was created using several levels number list icon. All lists use a style.

  This problem does not appear on all pages that has been done with the help of the same structure and formatting. Any suggestions on how I might solve the problem number on the linked page?

  Margaret Johnson

  Post edited by: Rick Stone - deleted email address

  Hello

  Hmmm, it seems to suggest that when the linked page is presented, he somehow lost the link to the CSS of the page.

  It is when linking from another page, what happens if connect you the TOC? Same behavior?

  I remember in the weird behavior see happening with this stuff in my own projects. And in my case, I think I had too many nested folders. This should not be necessary, but it is solved for me was to copy the CSS in the same folder and ensure there is no character of "shortcut" leading to the CSS. (.. /) is the abbreviation.

  See you soon... Rick

• Dynamic selection of images for OBIEE 11 g report

  Hello dear colleagues,
  
  need help to solve a problem with the dynamic selection of images for reports OBIEE 11 g.
  For OBIEE 10 g, it works perfectly - put images in
  
  *'\ < HOME_ORACLE_BI > \web\app\res\s_oracle10\images'*
  
  Directory and enter edit the column formula (in the answers) of the expression:
  
  * ' < table_name > '. "" < table_column > | ". jpg'*.
  
  and selecting
  
  URL of the image (in the properties of column-> Data Format)
  
  retrieve the images appropriate for the corresponding model (the project is for fashion retail customer) regarding the description of the specified column (for example * "DM_ITEM".) «MODEL_CODE ' ('09361' = *) put correspondence the name of the image file (* '09361.jpg' *).»
  
  For the OBIEE 11g (installed on W7, DWH on MSSQL 2008R2, VM in the field), I followed the link * "http://vikramwalia.wordpress.com/category/obiee-11g/" * and stuck at the step where the browser should recover image (s) based on the following address:
  
  *' http://localhost:9704/analyticsRes/product / *.
  
  Dive into the issue, I checked the staticports.ini and in the * [WEBLOGIC] * section find the following message is displayed:
  
  *#The port of 'content' for the most part POET. This is the Weblogic managed server port on which BIEE applications are deploie.*
  Oracle WLS BIEE managed Server Port No. = 9704
  
  that seems to be OK...
  
  The netstat command response confuses me much since I found (and also of external) record for TCP Local address (should be < IP localhost >: 9704), which lead me to the point that, probably one of the OBIEE 11 g services not started OR I made a mistake during installation of OBIEE 11 g, although the system did not send a message about this possibility. BTW, the BI Publisher on this machine works correctly.
  
  So, kindly ask support or advice on this subject. Thank you
  AL
  
  Published by: user7374943 on 29.04.2013 01:01
  
  Published by: user7374943 on 29.04.2013 02:15
  
  Published by: user7374943 on 29.04.2013 02:19

  Not able to open the IAM blog you referred to above.

  Make sure that you have deployed the analyticsRes component as shown in http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi1113/customizing_obiee11g/customizing_obiee11g.htm. Create a folder called produced under analyticsres and start accessing images.

  Good luck...
  Isabelle Renon