Obtain the host name

Similar Questions

• HP Pavilion 360: How can I change the host name of files?

  I need to chance the host name of file on my PC I do not know how?

  Ok. Thank you. I'll give it a try!

• How to have a different DNS host name to the host name of VICTORIES?

  How to have a different DNS host name to the host name of VICTORIES?

  You are welcome-

  Chapter 18, "Dynamic Host Configuration Protocol (DHCP).

  http://redhat.activeventure.com/9/customizationguide/ch-DHCP.html

  Chapter 7 - resolution of host name

  http://TechNet.Microsoft.com/en-us/library/bb727005.aspx

  And, again

  TechNet Windows Server Forum

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• Q10 Q10 blackBerry WIFI - browser error - could not resolve the host name

  Hello

  I use my Q10 while overseas for the Wifi only. My SIM card is in my 9900 (thank you BB not to tell anyone that BIS no longer works and WW BB roaming is not until after people buy OS 10 devices, anyway...) but I want to use the Q10 for Skype, browsing and Email while on WIFI.

  Skype works.

  Browser gives "Could not resolve the host name" and charge no emails.

  WiFi network is good (the 9900 is connected and works, as do other devices). I reset the phone, router, etc. etc.

  All to nothing does not.

  A telephone conversation of two hours with T-Mobile (from abroad) was unnecessary and disconnected.

  All DNS data seems to be there.

  Please help.

  Thank you

  Aviv

  Hello

  Problem solved.

  I have reset the router before, nothing helps. The only way I got it work is as follows:

  (1) turn off the router and wait for the phone to 'do not see' to the network in question.

  (2) turn off Wifi on the phone (menu setting and tap on wifi)

  (3) restart router

  (4) restart the phone

  After about 10 minutes, it is finally connected.

  Thank you all,

  I would BB would have simply kept the features of the 9900 and just made more attractive to the masses, instead of making an iphone with a keyboard...

• To change the host name of the device WAE

  If I want to change the host name of one of the WAE machine in my network, can I just rename it through Central Manager GUI? It is possible through CLI as well? Would the database of this device kept in CM by the change of host name?

  Thank you!

  Joe

  Hey Joe,

  You should be able to change it without any impact. In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit. I would like to know if this is the information you were looking for? In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit.

  Kind regards

  Kanwal

• VPN site to site by using the host name on cisco asa 5540 - dyndns

  Can someone help me configure VPN site to site on cisco asa 5540. The other end is seen configured dyndns and so should set up her counterpart with the host name.

  If the other end is a dynamic IP address, you must configure a dynamic map and then use in the encryption card

  See the following example.

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00805733df.shtml

• IKEv2 - xml file and the host name

  Hello world

  Ikev2 anyconnect works very well in the PC.

  Xml file in c\programs data\profile PC hostname say anyconnect_ikev2.

  Under the ASDM - anyconnect profile I changed the host name to say xyz.com.

  Then PC I tried to connect again and found that the connection has been established and the hostname under xml view profile: PC go to xyz.com.

  Need to know how the PC has managed to connect even if the host name has changed?

  Concerning

  MAhesh

  Mahesh,

  The client connects to the base on the HostAddress profile field.

  Host name, is what is used to populate the drop-down list and identifies the connection in "plain language." Although it is often the COMPLETE domain name, it doesn't have to be.

  When a user makes the connection, one of the things that happens is that any changes in profile on the ASA is pushed to the locally stored user profile.

• Problem with Virtual PC: can automatically log on to the comments because the host name is added comments user name after you have entered identifying information.

  When activate the integration in Virtual PC features, then the dialog box "Enter your credentials" appears. After entering the username and password of the system cannot connect because the host name is added in front of the user name that I entered. Example: Guest user name is "Admin". The host name is "XYZ". Vrtual PC try to connect as a user "XYZ/Admin" on the comment system. After getting the error message I can manually correct the user name in the normal windows login screen on the client and open a session. However, no saved credentials, to be asked to log on again whenever I have resize the Virtual PC window. Any ideas how to solve this problem? Thank you!

  Hello

  What is the error message?

  Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  1. when it asks for a password, click Cancel . Without integration feature, you are allowed to log on with an account that do not have a password.
  2. set a password for your current user.
  3. click on Tools , Windows Virtual PC, choose the integration features allow.
  a. type the password, check the box ' remember my references of "and click OK to open a session.»
  b. after joining the domain, logon in XP mode with the local administrator account.

• LaserJet P1505n printer: How can I change the host name to NPI1BDC68 to meaninful something more?

  My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.

  Well, which took me 10 minutes to solve.  I found the answer on a HP site based in France. (I kinda changed my google query and tried again.)  The site asks on first access, if you wish to continue in English, thankfully.  http://support.HP.com/us-en/document/c01175001

  In short, use Internet Explorer or Safari, go to the IP address of your network printer.  For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.

  Once connected to the network printer subsystem, select the Networking tab.  The host name is the first field which can be changed. Enter a new name from 1 to 15 characters.  Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done.  Warning appears that access to the printer may need to be changed if the IP address has been changed.  Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.

• Remote touch the codec using the host name - matching cache of IPv4

  Pairing for some of the features of my remote client contact is often lost/broken. It uses the DHCP protocol for codecs and uses dynamic DNS entries as 'host name' at the time of the twinning contact to the codec devices.

  While this works for pairing at first, it seems the cache keys resolved IPv4 address of the codec instead of the host name. Whenever the IP address of the codec changes, the pairing is lost.

  Am I wrong? I came to the conclusion that codecs must be treated using static IPs or DHCP reservations for Peel remote to work reliably
  Click Select codec manually..., enter the IP address or host name of the codec and tap Start matching.

  THX
  / David

  Appears this is a limitation of the Touch and/or codec, see bug CSCua05282.  The contact must use the IP address, which is why when you entered the hostname of the endpoint it solved its IP address and used it.

• display the host name when using Get-VMHostAdvancedConfiguration

  I want to interview several configuration settings in configuration advanced on all ESXi hosts in my vcenter, for example, I ran the following:

  Get-VMHost | Sort-Object Name. Get-VMHostAdvancedConfiguration-name UserVars.ESXiShellInteractiveTimeOut

  who gave me the following result

  Name	Value
  ----	-----

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  the problem is that it lacks the host name, in any way, I can change the cmdlets to see the host name of an extra column?

  Thank you

  I used the cmdlet Get-AdvancedSetting, not the Get-VMHostAdvancedConfiguration cmdlet

• How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

  I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.

  I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.

  Is there a VMware API that can be called or asked the host name?

  Thank you.

  Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

  Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

  Mike

• VAMI will not keep the host name...

  I have Ubuntu 10.04 Studio Appliance and.  When you open the Web interface and set the host name, it takes her.  Log out and back in and it is clearly expressed.  Restart the server and the host name is localhost.localdom.

  See the attachment for the screenshots

  I found a work-around as it seems that the vShield data security apparatus has the same problem.  Article KB 2009519

  If you have made your changes, you can delete

  / opt/VMware/etc/VAMI/Flags/vami_sethost {name, network}

  If you want to disable this in your profile to build you can also set the following properties to false:

  fake

  fake