Of TS-L632 DVD writer (SATA)

Similar Questions

• DVD writer stopped writing - Vista missing files

  My dvd writer just stopped working. It crashes 5 dry (50%) and then told me that I don't have a recordable disc. I just noticed, but he COULD have started right after my daughter installed the latest version of itunes. Certainly miss me my IMAPI service cmd = sc query ImapiService returns "the Service does not exist. I have also no controller of ata/atapi IDE showing in my device manager, although my SATA dvd writer appear.

  I'm running Vista 64 HP SP2 on a HP 8430f mediacenter. I swapped the device and tried different disks without result. What deleted my files? Two of them are the source of my problem? Can an 'upgrade' of Vista with my old discs to reinstall them?

  The Itunes software has caused your problem. Not knowing your daughters age and sensitivities, I can only offer this Advisor, from the season. (Look at my photo for a clue).

  You will find a hand for her computer or you share the computer with different accounts.

  Now, to solve your problem for now.

  (1) have you tried a "system restore point". Vista has written a just restore point before the installation of applications (ie itunes).

  (2) HP troubleshooting utility:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00817052&tmp_task=solveCategory&lc=en&dlc=en&cc=us&os=4062&rule=3540&product=3686668&sw_lang=#c00817052_dm

  (3) can do an "upgrade" to Vista with my old discs to reinstall them? Please, do not use this wording, I get a terrible cold. What your actually implying to use your "recovery discs DVDs" to solve the problem.  This is not an upgrade, it is a destructive formatting your drive, reinstall the original Vista operating system. Have you started shaking? (Any OS) reinstall erases the hard drive. You willlose all your photos, music, documents and all theinstalled programs that you added to the system.

• Win 7 and DVD writer LG GP50Nb40 USB - device unknown

  Hello

  I bought the DVD external USB GP50Nb40 LG burner and I'm under Win 7 64 bit.  I have connected the device with the supplied cable and windows says that there is already a device and refused to play the DVD.

  I have a HP DVD writer internal.  so I assumed that there was a conflict and disabled the HP device.  Windows has always refused to recognize the device.

  then I activated the HP and put the LG inside installation disk and copied it on my hard drive.

  then I opened my office case and disconnect the power cable and sata internal DVD HP.

  then I turned the computer back on and the LG software installed disk.

  then I downloaded an update from LG as directed by their software.

  He failed because he said that I didn't have the specified device from LG.

  but I have the LG connected via USB 2.0 hub, but I can't use it all.

  Windows displays an unknown device.

  is there anyway to get my external LG to work or do I have to return to electronic Fry?

  I've already spent more than 2.5 hours on what should have been a very simple installation, that's why I bought a USB device instead of an internal procedure.

  

  Assuming that you tried to connect to USB ports - preferably a USB port on the back plane of the computer and not through a hub - I assume that the device is defective and return.

  From what I can tell, this external hard drive does not have its own power supply and relies on the USB for power.  This can cause problems if you have other devices drawing power.  Try that it connected directly to the computer with no other USB devices connected other than the keyboard and mouse.

• DVD writer will not realize any sound recording

  I can burn the video portion of the DVD very well, but there is no audio data. all retired to device mgr. When I run the HP optical drive test, get a 'mistake' contact support '.

  Hello peter47,
  
  There may be a problem with the DVD writer into the computer.
  
  What make / model of computer are you using?
  What operating system?
  What program do you use to burn the DVD and have you tried multiple?
  You can burn CD which is just audio or do they have the same issue?

• Need driver DVD writer for my Satellite L300

  Hi guys that I really need help.

  For some unknown reason to myself I have sewing to have deleted the drivers of my laptop DVD writer.
  It won't play or write disks, I have tried every disk there.

  Its saying the _archive is missin or corrupt_,
  I'm not sure that I now need to address this issue the drivers or so i ' l'll have to reset the settings of factor.

  * Can anyone please help, thank you *.

  Optical disc drive using the standard Microsoft driver and there is no special driver for this device. Optical drive should be automatically recognized by the operating system.
  What is the STRANGE situation in Device Manager?

  Of course, for getting new factory settings is simplest and easiest way to get it working again, and it can be done very simply - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

• Satellite L10-205: CD Writer 2 DVD writer

  Mr. President is respected...
  I would like to know if I can change my laptop CD writer in DVD writer super multi. even instead of Toshiba

  I searched for a long time on this subject, but I don't have a specific answer, and so I decided to ask my manufacturer.

  So please I would like to have the answer as soon as possible.

  my laptop is Satellite L10-205

  Post edited by: mnkhani

  Hello

  Yes, I think that it is possible, because the L10-189 has a DVD Super Multi drive installed.
  Go to a service partner, they can build in the player for you. Otherwise, you will lose your warranty.

  Good bye

• Satellite A75: Problem external USB 2.0 DVD writer

  I have Toshiba Satellite A75 and try to connect external DVD writer in USB 2.0. The writer is recognized without problems. She can read and erase CD and DVD but when trying to save in Nero 6.6 I received the error message: "abandoned scsi command.

  Hi Arek

  In my opinion, there are many reasons that may be responsible for this problem.

  One of them is a conflict with other software of CD burning, that is currently or was once installed on the system. These other recording programs registry changes is the normal cause and only for cleaning the registry after removing the software will solve the problem.

  You have some other burning software installed on your device?

• Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

  Hello

  I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

  I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

  Someone has ideas how to get this working again?

  Thanks in advance...

  Kind regards

  Matt

  Hi Matt

  Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

• DVD HP dvd200i drive: HP DVD Writer dvd200i installation software

  I removed my OEM HP DVD Writer dvd200i from HP Win XP machine died at a Win 7 machine.  It is not recognized, so I guess I need s/w installation.  Am I correct, and where can I get the s/w?  I searched HP support and can't find any s/w installation it for HP DVD Writer dvd200i model.

  What you need is not the installation software, but a driver.

  To appear in Device Manager?  If so, clidk right it and update driver.  It must install at least one generic driver.

  This isn't a young unit and unfortunately HP only provides drivers for it up to Windows XP.  You try to install the driver compatibility by right click on the downloaded exe file then compatibility mode.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=81681&

• The DVD Writer driver is missing

  Hello

  I use HP Pavilion laptop g6 and it has the same windows 7 Home Edition I got when purchasing the laptop.

  I inserted a DVD that had some photos, and then my antivirus has warned that there is a virus. I clicked on "move to the Vault", but he said something like 'located in the optical drive.

  Now my DVD writer not bed not any disk. I tried to restart, but it was not successful. Device Manager says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Help, please!

  It seems that your antivirus has played a role in the present. What anti-virus do you use?

  You had considered using the system restore Windows to upgrade the operating system of your laptop computer to a restore point dated to before this happened?

  The following video shows you how to use the system restore. You don't need to go in Mode safe mode system restore is accessible from within a normal Windows desktop.

• HP CD - DVD Writer 840b does not DVD-DVD is full, even using a new DVD blank, said.

  HP DVD Writer 840b won't recognize a DVD, but will write and read the CD OK.  When I try and load a DVD and check the properties, it shows that the DVD is full, even if you use a blank DVD known.  I use Windows XP Professional 2002 SP3

  Hello

  It seems to me as your engraver of DVD 840 b is faulty even when the CD in reading and writing is OK. When the drive is under warranty, you can recover.

  If you can - try to test with some other DVD player.

  LC

• installation of Sony AD-5260 s - 0b 24 x internal DVD - RW SATA black bare

  I just got a new one Sony AD-5260 s – b 0, 24 x internal DVD - RW SATA black bare and power cable and serial ATA, but where to plug the serial ATA

  Well, that depends.  Even your computer does support SATA?  What is the brand and model of the computer?

  http://www.ehow.com/how_5076452_connect-SATA-DVD-drive.html

• Save now don't read do not HP DVD Writer 1140r as recordable legacy

  Save message now says no compatible recordable legacy found on the system. Do you have all the troubleshooting & uninstalled, restarted, new message material found, always the same.  Legacy Bishop reading drive HP DVD Writer 1140r but Record now sees him only as a player, not registrable as it used to.

  Hello:

  I thought that maybe your model needed a storage controller driver so that the registration program could see the drive.  But your PC will not need this.

  Have you tried another DVD burning software program?

  I love this one. It's free and easy to use.

  Download the 32-bit version without Open candy (click on the blue, that more download link Options).

  http://CDBurnerXP.se/en/download

  Paul

• DVD writer prob

  I have a dvd writer what tray comes out sometime sometimes not it crashes any solution to free up the movement of the status bar.

  Hello

  ·        Who is the manufacturer of your DVD drive and what model?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  It could be a hardware problem, I suggest opening the case and try to clean the disc.

  It may happen if the grease on the rails DVD transport becomes difficult. Cleaning that can help you.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LG GH22NP20 dvd writer driver is unable to start on Vista

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs ywhen I start my computer, the DVD Writer driver does not start.
    I checked my device manager and it shows up with an error
    This device cannot start. (Code 39) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
    and when I click on "Find solutions" it loads just a little while and then disappears
    the dvd is a LG GH22NP20

    help would be greatly appreciated.ou have problems with

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner