OfficeJet 6500 and Mavericks

Similar Questions

• OfficeJet 6500 and router Wireless does not connect

  I just bought an Officejet 6500 and try to connect to my wireless router.  Whenever I try to connect the printer to wireless it crashes.  The power button does not light, but the screen is lit without text.  At this point, I can't close or get it running again.  I am running Vista Business 64-bit, and the router is a 2wire 1800 HG through AT & T.  It works very well with a usb connection.

  Thanks in advance.  John

  I think you just meet a known issue with some printers of HP network with routers 2WIRE AT & T DSL.

  Have identified us the problem and will deploy an update in the future.  So far, the work around is to assign a static IP address to the printer. Here's a way to do this:

  1. Unplug the phone line from the 2WIRE router
  2. Cut the power to the 2WIRE router, wait 30 seconds, then turn on the power.
  3. Go through the normal process of the printer connected to the 2WIRE (Ethernet or Wi - Fi) device. The printer will not crash as long as the telephone line is disconnected from the 2WIRE device.
  4. The Officejet front panel, go to the menu of 'Advanced Setup' under 'network '.
  5. Select 'Settings of intellectual property', acknowledge receipt of the warning and select "" manual IP ".
  6. Select "IP address" and change the last group of IPS (byte) to something higher or lower. Specifically to your 2WIRE router, select 192.168.0.60.
  7. Press Ok and plug the phone line into the 2WIRE router.
   

• OfficeJet 6500 and Internet Explorer

  I just installed the OfficeJet 6500 (wired) and started having problems when closing down Internet Explorer. He ALWAYS told me that IE has stopped responding, but only when I was close anyway. IE has continued to work well when you surf

  I went through my list of startup (msconfig) and it turns out that it was the "HP Digital Imaging - hp all in a series" that was the culprit. I disabled it on startup and the problem disappeared.

  Is there a solution for this.

  What should I start up for my printer works fine with all its bells and whistles.

  Thank you

  This is caused by the HP Smart Web Printing program. uninstall programs and features, and it should work fine.

• OfficeJet 6500 and mountain lion

  I installed mountain lion and now my officejet 6500 will not print, or it prints, but after an hour or two after the print job is sent.

  I deleted the driver and reassembled using the apple software update, the problem persists. Any ideas out there?

  Ok

  Try to update the drivers by clicking on the icon Apple and then software update, restart and check any change.

  If there is no change don't try to install the package below:

  http://support.Apple.com/kb/DL907

  If the problem persists, make sure that the USB port used is not longer than 2 m long, with direct links to a MAc and not through a hub USB or extension.

  In case you have an iMac, make sure to plug the USB at the back of the Mac and not in the keyboard port which is not powered.

  It will be useful,

  Shlomi

• OfficeJet 6500 and USB on Windows 7 64 bit does not (wireless works fine)

  Hello world.

  New printer. WiFi Of my different laptops works very well. However my main system is not in wireless. Try to install via a USB port. When I plug the printer Windows 7 sees it but I can't get the drivers to install correctly to where I can use fax/scan options. I can print, but I can't do anything else. If I go to the device, the printer appears with the correct name, but says that the driver is not installed. If I try to install manually (using the disk) it barfs and says that the driver is not digitally signed.

  When I run the installation of the software (I downloaded the new installation driver package Basic and full) and I get to the point he wants me to plug the printer, it starts the installation but then Windows barfs and said "no driver found" and then the HP installation fails. It's almost as if Windows 7 is blocking the device when it cannot find a driver. I tried to disable 'automatically install the drivers', but then the installation of HP does not see the printer when it is plugged.

  Basically I'm going nuts and is getting ready to send this printer to Costco, get a Canon. I know the drivers of Canon works because my neighbor has the same configuration as me and his printer, installed fine. I prefer the HP (well, I did) but tired of beating my head against the wall. Anyone have any ideas?

  Thank you

  . / height

  I figured this out. The USB driver would never install. I beat my head against the wall for days and never thought about it. However, I didn't know that I could install the drivers on my main PC with no wireless connectivity wireless. Has a cable LAN connectivity. Apparently my wireless router is smart enough (like most) to send the print queue through my local network to the wireless printer.

  So I just installed the software wireless on my 64 bit WIndows 7 system and I print just as if I was of my laptops wireless.

  I wanted to just update everyone because it isn't really all that clear that you do know. print even if you are wired to the wireless printer.

  See you soon,.

  Dave

• OfficeJet 6500 prints a bright black text and blur gray/mast

  
  

  Also, I have the OfficeJet 6500 and had the same problem.  Black text was printing with a mixture of colored inks rather than black ink, resulting a gray, fuzzy text.   I finally found a solution.  In each application under Page Setup, there is an option called "Format for".  Mine was created for "any printer".  I changed that to "Officejet 6500 E709n [830E4A]" and now it prints black very well.  I have a Mac running 10.4.11.  I hope this helps.

• Firefox 3.6.10 allow me to choose a black cartridge only printing one my HP Officejet 6500 (not wireless).

  Selector only black cartridge is not active.

  The problem is your printer:

  Also, I have the OfficeJet 6500 and had the same problem. Black text was printing with a mixture of colored inks rather than black ink, resulting a gray, fuzzy text. I finally found a solution. In each application under Page Setup, there is an option called "Format for". Mine was created for "any printer". I changed that to "Officejet 6500 E709n [830E4A]" and now it prints black very well. I have a Mac running 10.4.11. I hope this helps.

• OfficeJet 6500 a: Office jet 6500 has printed a computer; produce reports of the printer

  My trusty old Officejet 6500 has suddenly cannot print from my computer.  When I try to print, I receive a FAX form on my screen.

  I printed the printer Hardware Information (2 pages) and the status of the report of the HP printer Assistant printer and they look great.

  How to print the Test Page from Windows printer and the Configuration Page of HP network?  I printed these years when I installed the printer, but I do not remember how I accessed them.

  Thank you for your help.

  It seems that the FAX is set as the default for your printer.  Try the following: click on start, devices and printers. Right-click on the Officejet 6500, and then select set as default.  At this point, it can come with a selection to the FAX or printer, select the printer.

• OfficeJet 6500 new black cartridge installed, but print Brown (all colors) instead

  Hello

  I replaced the black cartridge in my OfficeJet 6500, and clicking on it.  (I triple checked it.)  However, when I try to print a document that is supposed to be any black ink, it prints in a Brown shade as if it is mix inks instead of using black-colored.   I printed a diagnostic page, cleaned and alignment of the heads of print and even restarted the computer and the printer.  Nothing helps!  I am still at work and I have documents that need to be printed!

  Do you have any suggestions?

  Thank you!

  What operating system do you have?  For Windows 7, you would go to start, devices and Printerss, right-click on the Officejet 6500 and then select Printing Preferences.  You can change the setting 'document Type' in the tab 'Features', then click on apply.

  The above will change the default value.  You can also change the print to a particular print job by selecting the print properties when you go to print.

  

• OfficeJet 6500 E709n: for 6500 Device Manager

  I just transferred an officejet 6500 portable Mac on my pc Windows XL.

  I noticed on the laptop, an HP device at the bottom of the screen area manager there, but there is not one on the pc or in the system tray or the HP folder.

  The installation not being available disk, I downloaded the software from the HP website.

  How can I get the Device Manager on my computer?

  Thank you

  Hello

  HP Device Manager is the software for Macintosh computers only.

  On the start menu, select programs > HP > HP Officejet 6500 and open the program HP Solution Center, it is one that is available on a Windows PC to your printer.

  Kind regards

  Shlomi

• HP Officejet 6500 kills everything on my wireless network

  I have the HP Officejet 6500 and when I try to put in place, wireless, it kills everything that is on the network.  It is not just completely kill, it pushes everything out of the network internet access.  I had everything set up in my old house without problem, but I recently moved and changed routers and the trouble started.

  I completely deleted all my computers printing software, thinking that maybe there is an IP address from my old router in conflict and have also used the HP wireless program both without success. I'm about to end with it.

  My router is a SMC8014WG and I have 3 computers running on Windows Vista and 1 running on Windows 7

  OK, let's try the same thing, but before you start:

  1. disconnect the phone line to the back of the SMC

  2. restart the SMC by pulling the power plug momentarily.

  3. follow the instructions above.

  4. When you are finished, plug the phone into the line and raise the MSC.

• OfficeJet 6500-E7709n - cartridge to reactivate 'chip' level of oversight

  OK, slap my wrist, I was a bad boy...

  I tried to refill the cartridges run out on my OfficeJet 6500 - and no end of trouble.  Yes I know.  Smart move Einstein!  One of the recommendations is to disable monitoring via the menu Preferences (#7) in the configuration of the chip ink level.

  I'm sure you can guess, that did not do diddle squat, so now I want to go out & get some genuine HP cartridges.  Before I install them, I want to cancel the mess I made and put things back as they were.

  Question: How can I enable this option on YOU?  After turning it off, option has completely disappeared in the Preferences menu.

  I tried a "Reset Defaults", but it does not work.  Is there a way to reactivate?  That, in the absence, is there a way, nuke (so to speak), the printer around the age of stone for what is it to its Out-Of-Box State?

  Thank you!

  Jim (J.R.)

  Update:

  I figured out !

  To do this, you must do a Reset of the NVRAM by performing the sequence of steps following:

  1. Turn the printer off using the power button on the front panel
  2. Using two fingers on one hand, press and hold the keys "6" and the "#" at the same time.
  3. With your other hand, press the power button to re - turn on the printer.
  4. Keep pushing on the # and 6 keys until the screen turns off and then turns on again to the top.  Then he will say "Semi NVRAM Reset" - at this time there, you can release the # and 6 keys.  This may take a minute or two.

  Once this is done, the printer will go through his routine of initial running "out-of-box" for printing.  In other words, it will attempt to reload the print heads by making several cleaning cycles and will work then a cycle of alignment.

  When you do that, you're done.

  I hope this helps.

  Jim (J.R.)

• OfficeJet 6500 e710n-z: scan and Fax no longer works

  Hello

  After working fine for a couple of years, scanner and fax on my Officejet 6500 functions do not work.  The print function is fine.

  Change that recent computer-wise is that I am switched to a Macbook Air (and upgraded to OS Mavericks) Macbook Pro, but all that was on my previous Mac was transferred to my Air of my LaCie support.

  When I try to scan a document, the preview function works fine but when I click on Scan, a small message says "Made scan of selected areas" but no scan is actually performed.

  When I try to send a fax, I can hear the tone on my phone line and the phone rings but the fax does not pick up.  I tried with several known fax numbers and it's always the same.  I almost never receive faxes so I can't say whether or not the receiver function works.

  Can someone advise?

  Thank you very much!

  Hi Super Dave,

  I was able to scan with the Apple Preview (even if Apple Image Capture did not work) so thank you so much for this!

  Any suggestion as to the fax?

  Thanks again!

• OfficeJet 6500 has more E710s and Mac OS 10.9.2 is a step to go HELP

  Dear all,

  Tried to install the software for above mentioned HP printer on iMac 10.9.2, and it is not supported.  The printing works very well, because the computer picked up the wireless printer, but I want to scan!

  Cannot find anything on the HP website, except download ePrint.

  Would greatly appreciate your comments!

  Concerning

  Welcome to the CSZ forums,

  I saw your post to a driver for your model Officejet 6500 E710n and the Mavericks. There is no driver available for this model of printer on the Mavericks. Although you cannot use the HP software to scan, there is work around options for you can scan.

  See this link and check under "How to scan with the Apple Software Update driver?":

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  I hope I helped answer your question!

  Have a great Monday

• OfficeJet 6500 e709n is not compatible with OS 10.9.2 MAVERICK

  Hi, I just upgraded my IMac to Maverick and can't use my e709n officejet 6500... can anyone suggest a solution?

  Hi girishrangan,

  While HP has no 10.9 full of features for the 6500 (and I don't know if they will), they planned a work around. The documents below show the steps on how to update the printer driver and how to scan using the Apple instead of HP software

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  How to perform a scan: OS X v10.9

  Hope that helps