OfficeJet 6500 E709n: Officejet 6500 E709n - 10 Windows - printer automatically a 'break '.

Similar Questions

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• HP OfficeJet 6500 wireless do not print because there are 2 days, I changed my wireless router

  Original title: print printer print

  My HP OfficeJet 6500 Wireless will not print because 2 days ago, I changed my wireless router. The printer is no longer under warranty and I'm using Windows 7 OS. I have

  Assuming that there is a wireless connection to the printer, the most likely cause of the problem is that the printer is configured to obtain its IP address automatically, and the new router has assigned to the printer an IP address that is different from that which was initially awarded.

  To check if the above is the question:

  Controls on the front panel of the printer allows you to print a Network Setup page:
  From the home screen, press the right arrow, and then select Setup.
  Touch reports, click Network Configuration Page.

  Find the IP address of the printer on the Network Configuration page.

  On your computer, go to devices and printers

  • Right-click on your printer icon, and then select "printer properties".
  • Click the "Ports" tab
  • WITHOUT clicking anywhere in the list of ports other than the right scroll bar, find the line highlighted (the one with the box in the box)
  • Is the 'Port' the same as the IP address of the printer that you noted on the Network Configuration page?
  • Assuming that the port in the printer properties dialog box is not the same as that shown on the Network Configuration page, click the "Configure Port" button and enter the correct IP address in the box "printer name or IP address.
  • OK your way out

  To avoid this problem does not happen, read the User Guide for the your printer and configure the printer to use a static or fixed IP address.  Choose an address that is in the same subnet as the router but outside the range of addresses used by the DHCP server on the router.  You can find this information on the configuration of your router utility.

  For example, most Linksys/Cisco routers use the IP addresses of the form 192.168.1.x and allocate addresses in the range 192.168.1.100 to 192.168.1.150.  In this case, you should take a static IP as 192.168.1.20 (20 is outside the range of 100 to 150).

• OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

  Cannot find a driver for the Officejet Pro 8500 on Windows 10

  Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

  Reinstall the driver of windows 8.

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• OfficeJet 6600: upgrade of Windows post 10

  After upgrade Windows 10 on 29/07/2015, my 6600 Officejet continues to work and print. but when I click on my desktop icon to view ink levels or that scan a page comes up saying install new printer.

  In the control panel Officejet 6600 is indicated as being installed and work and notice that in another thread, there is a link for HP printer drivers that says if the upgrade of Windows 8.1 for Windows 10 printer will continue to work. I suspect that a Windows 10 driver is needed somewhere, but cannot find one in the page Web of HP.com drivers. Also when I followed the links in the page that appears when I click on my icon it doesn't drive anywhere which resembles a desktop printer software download.

  Ex Airways.

  Had another go to resolve the issue today. Uninstalled and reinstalled printer software again. This time success all functons printer now satisfactory. I don't know but perhaps HP have written some new drivers for Windows 10 of the day overnight?

• OfficeJet Pro l7580 on Windows 8: always impossible to install driver

  Reopening of the question of: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-l7580-on-Windows-8-canno...

  Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

  OfficeJet Pro l7580 (connected ethernet)

  Windows 8 64 bit (clean install)

  Driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110039-1&cc=us&dlc=en&lc=en...

  Everything worked fine on Win7 64 bit

  Print with 8 default windows driver

  When you install the driver, the driver installation tells me to "uninstall L7300.

  I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

  I've tried it on 2 computers different windows 8, with the same result.  The driver seems to be fairly broken

  Hi mcevoys,

  I understand that they are freshly installed operating system, but in order for me to isolate as a cause as possible, should be done on at least one of the computers. If you do not want to perform the update to help isolate the problem, then you will need to contact support to see what they can do to help you get this printer is installed on your computer. I would like to know what you want to do?

  Do a Refresh of Windows 8:

  1. hold your mouse at the bottom or at the top right of the screen (if you have a touch screen, you can drag your finger to the right of the screen to the left) to bring up the bar of charms.
  2. click on settings.
  3. click on "change computer setting" below.
  4. click on general.
  5 scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
  6. who should start a wizard that will take you through the update process.
  7. install the printer on your computer

• is hp officejet j4680 compatible computer windows vista laptop

  the hp officejet j4680 works with windows vista laptop

  Yes.  You can download the Windows Vista drivers for it from page downloads of the software & driver Officejet J4680 HP. Boulder computer Maven
  Most Microsoft Valuable Professional

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Officejet Pro 8620 and Windows 64 bit 8.1

  A week ago, I bought a HP Officejet Pro 8620, but the printer never worked. It can scan and copy, but no impression at all. I tried uninstalling, reinstalling the software also using HP printer Installation Wizard. I also tried printing HP and doctor Scan, but nothing worked. It prints even an HP print test page and scan doctor, but she does not Windows print. In fact, when I tried to check the printer properties in windows and start a test where page, a message that it is not possible to print because of the driver is not correct in suggesting to ask HP a good pilot. Can I ask you... the printer driver is not compatible with 8.1 64-bit windows? And if so, why do you sell saying it's compatible? And why don't release you a new driver?

  Hi there is Andel,

  Please come back to me

  Notepad will print with the firewall disabled or active. That's good news.

  I'm curious to know if you try to print from a specific program that is not printing, or y at - it print a lot of programs do not? Have what programs you tried? (Microsoft Word 2010 for example)

  You can also try to configure the firewall settings to allow the printer. Who can help.

  How to change the firewall settings

  Another idea would be to create a new account of a user with administrator privileges. It may be a problem with one of the accounts if it does not print.

  Good luck, I would like to know how it goes

• OFFICEJETS WORKS ONLY WITH WINDOWS 7

  I can't believe that HP has no driver packages available for the Officejet Pro 8500 for Windows 7 range.   I was told this morning that HP will not available until end of January full driver packages.    Can we say Epson or Canon?

  Base and full recommended Win 7 drivers for the 8500 Officejet are now available for download from HP.

• HP Officejet j4580 disconnected series Windows 7 64 bit

  I have a new computer with Windows 7 64-bit operating system.  I installeld new firmware for my HP Officejet J4580 all-in-One Printer and applied the patch that HP.  When I open the 130.0.44.62 HP Solution Center, I get a message""HP Officejet j4500 series disconnected.

  How to solve this?

  I want to send a fax.

  Problem solved by HP customer care

• HP Officejet 4500 All - in - One Printer - G510g 8.1 windows installation 64 bit

  After running a HP Officejet 4500 All - in - One Printer - G510g two an old notebook Windows XP and 64-bit computer laptop, an ASUS Windows 8, subsequently updated article 8.1; I am now trying to install it to run from a laptop Toshiba Satellite NB10T-A Windows 8.1 64 bit, but without success.

  The original installation CD does not provide an installation but start up (probably because it is only compatible with Windows XP and 7.

  The site www.hp.com offers a download a driver for the printer to Windows 8,162 bit. Sounds to download very well. Unpack the file, said he set up, but in the end, the driver is not available.

  There is no option to uninstall, in Control Panel of configuration/Printers/software control panel.

  Without that driver, the system Windows 8.1 recognizes the printer and allows the simple printing applications of ffrom. However, it is not possible to use scanning options, which gives the error message that the driver is not available. HP or HP Document Manager Solution Center are installed.

  I tried printing HP and doctor Scan. It recognizes the printer on USB link, said that lack of drivers, downloads, unpacks and installs the drivers. But the printer icon in the control panel of configuration/Printers continues to have an alarm icon indicates that the printer is still missing drivers.

  I also tried installing HP Printer Wizard. The result is similar.

  Please tell us how I can install this equipment scanning options and make sure that the machine is compatible with 8.1 64-bit windows.

  Thank you

  Dear Rainbow 7000.

  Thanks for your help. I tried following your instructions - remove all files HP, starting in minimal mode, downloading and installing new. Also tried to disable the antivirus scanner. But in vain. The drivers scanner has not been installed.

  The 64-bit Installer driver downloaded, but did not complete installation despite the night running. Looking at the processes running in the Task Manager, the name of the installer is for a 32-bit Installer (see the screen attached capture). Could be the problem?

  After trying various alternatives to the procedure, I gave up and downloaded the base driver HP Officejet 4500 m G50g Corporate Edition 14.0 (link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110155-1&cc=pt&dlc=pt&lc=pt&os=4158&product=3919449&sw_lang= ). This download is recommended only for the professionals, which I am not - but nothing worked.

  This driver installed fine. He recognized the printer and scanner. The printer and the scanner properly. The menu shortcuts also work as previously.

  It looks like so there is something wrong with the installer 64 bit full feature software and driver. The solution for the other wil the same problem is to try the base driver - although it is for the professionals.

  Thanks for your help, and I hope this will help other users.

  Have a happy new year.

  -------------------------------------------------------------------------

  Screenshot of the name of the installer:

  

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• I need a Windows 7 for HP Officejet r45 all-in-One Printer driver

  I need a driver for windows 7 that works with HP Officejet r45 all-in - one Printer

  Did you check on HP.com?
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=61561&LC=en&cc=us&DLC=en&lang=en&cc=us