OfficeJet 6500 Gets the IP address of the router wired

Similar Questions

• HP OfficeJet 4620 - not the router's IP address

  Hello!

  I have a HP Officejet 4620, who worked until yesterday under power and off the fine. Yes, digitization is a PITA, but well, it was a gift

  In any case.

  Since yesterday my 4620 won't get an IP address from my router. I use a router TP-Link WiFi with OpenWRT. I had it configured the printer receives an IP, but even that won't happen again.

  I printed directly from the printer to the Network Configuration page and the testpage so Wifi.

  The wireless test tells me that the printer is connected to my wifi, by dint of perfect signal and has the right channel (11).

  The network config page shows, however, that the printer is disconnected my wifi but has the correct SSID listed. And theres no IP assigned.

  I have already tried to assign a manual IP in my network and have restored the settings default to wifi, but when the software waits a new IP from my router, it didn't get one.

  Also several reboots does not change a thing.

  But the router side he has changed nothing and all network (LAN or wireless) devices are connect well and they will have an IP address fixed or dynamics of the DHCP based on settings.

  So I would appreciate any help b4 I throw this piece of sh * t through the window.

  Thanks in advance

  Andy

  Hi Obi-illusion,

  Thanks for the reply!

  My apologies, I should have realised that before I sent the update of the firmware. You can also do it via computer if you happen to have a USB cable, just click here.

  If this doesn't solve the problem, or you do not have a USB cable, please read this privacy statement for HP: http://bit.ly/pCUQT7 and continue to check your Inbox of forum for a reboot. If you are unsure how to check your messages on the forum this post, has the instructions.

  I hope that does the trick!

• HP OfficeJet 6500: Is the color cartridge to print in black?

  Hello

  I had a brother printer which required that there is ink in the color cartridges even if I only wanted to print in black.  Is the HP Officejet 6500 in the same way?  Is it necessary that it be ink cartridges color, even though I'm only printing in black ink only?

  Thank you

  Westin wrote:

  Is it necessary that it be ink cartridges color, even though I'm only printing in black ink only?

  Yes, he does. And it is only to prevent the nozzles of ink on the printheads of evaporation, resulting in poor print quality when you decide to print in color.

• try to download a program from the disk and get the route can be found in re-indexing re-index research research research service troubleshooting troubleshooting

  I am trying to down load a program from a discus for an automotive tool, that I bought.  Whenever I try to load I get the route cannot be found. I loaded other programs without any problems.  It will say get a folder with her inside whichI find but it says that the file does not exsist.

  Hello

  1. what operating system are you using on your computer?

  2. what program you want to download?

  3. have you made changes on the computer before this problem?

  See the methods mentioned below.

  Method 1: Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2: Put the computer in a clean boot state and check to see if the problem persists. Follow the steps mentioned in the article below
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Answer comes back with more information so that we can better help you.

• I can't get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Does not work.

  Remember - this is a public forum so never post the private information such as email or phI cannot get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Do not work.one numbers!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Louise South,.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you to uninstall the software and reinstall it from the link below.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Check whether the problem is resolved.

  Method 2:

  Follow the instructions in the link below and check if the problem is resolved.

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• OfficeJet 6600 Gets the message of Network Installation fails when you try to install

  Hello

  I have the worst time setting up my new printer wireless Officejet 6600. I work with a wireless-N router that was purchased less than a year ago. I have other wireless products that work well with the internet, so I do not see there is a connectivity problem.

  The test of the printer indicates that everything is OK:

  Wireless on - PASS
  Wireless - PASS work
  Signal quality - very good
  Connected - PASS

  etc, etc.

  I ran through all the troubleshooting I can find and nothing works. I have disabled the firewall, unplugged my router and modem, disconnected the printer, tried to implement on its own IP address. The installation wizard finds her and tries to implement, but I only get the message that it was a "network installation without success.

  Has anyone experience this problem?

  Any new ideas on troubleshooting are welcome.

  Thank you
  Liz

  Hello

  Thank you for your comments. I didn't expect such a quick response, which was great.

  I move the printer to get a signal 'excellent' and tried the other steps you listed.  Through some googling more, we discovered that we needed to do the following:

  Go to the control panel

  Select Printers and faxes

  Right click and select Properties

  Select the Ports section

  Add the port to the IP address of the printer displays

  Not sure if this is the ideal way, but of course, it worked and I am now a happy customer. Hope it helps someone. I'll still Bravo for having responded so quickly.

  Thanks again!

• HP Officejet 6500 has the IP changes automatically

  I have a HP 6500 has more connected to a network using a router Netgear WNR 2000. The IP address of the printer continues to return automatically to one that is not compatible with the network. So, I can't print wireless.  HP technicians have tried to solve the problem but eventually says I need to replace the router. It is two years old. Is it possible to get the system to stay connected, that is compatible with existing equipment?  How?

  What IP address it back?  If its 169.254.x.x, this means that it is disconnected from the network and cannot re - connect.

  We will do this:

  -On the front of the printer: configuration > network > network by default.

  -In this same network menu, run the Wireless Setup Wizard to connect to your network.

  Now, let's set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is all high-end (.2 a.254.  We will use 192.168.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• OfficeJet 6500 requires the Toolbox

  My client has a MFP (ink jet) of color Officejet 6500 printer - works fine under WIN/XP, with the CD I was able to install full features including the HP Toolbox, with which it will display the level of ink and the printer alignment/Calibration, User als was able to perform services such as 'a cleaning of the nozzles' print head etc.

  Now, they moved their computers to WIN 7 (64-bit) and after you apply the WIN7 driver downloaded from the Internet, printing works fine BUT I can't locate the HP Toolbox to perform printer maintenance services.

  The user wants to receive ink level to display well printhead cleaning & calibration.

  Can you help me to provide me with direction please?

  A response from the HP forum said to download the HP K550 Toolbox, I tried, but it came up saying: 'can't use Tool Box because HP K500 driver is not installed!'

  Thank you

  Andy Pang (I'm a HP Business resellers/partners - database Computer Systems Inc. - Cambridge, Ontario CANADA)

  EM: [email protected]

  I'm sorry I miss read what you said in the first post. You can certainly get the full driver package. I'll link below. Because it looks like you have the installed base driver right now, all you have to do is download and run the installation. Rather than install everything, it should ask you what you want to install. Install the digital imaging monitor, OCR by IRIS and Solution Center. Solution Center will be the Toolbox, and the other two will expand your scanning options. If something is not going to try to install software, uninstall the printer from the computer and try again. Let me know what happens.

  Driver and HP Officejet Full Feature software

• Printer Officejet 6500 misses the beginning of photography on thick photo paper

  I have an all-in-one officejet 6500 (E709a). My office is running Win7. I felt for a year or two and initially he printed on paper photo well, but he does NO more.

  I use a kirkland photo paper, professional glossy inkjet paper, and it says on the box of paper in that it is 69 lb 255 g/m2, 10.4 mil 8.5x11. From what I could read in the HP specifications, 255 g/m2 is supported (I think I saw it supports up to 260 or above), but has not seen a specification for the thickness. In any case, at the beginning, when it was new - it worked. Now, it's bad causign.

  \When I print a pidcture, say printing full page and I remplir fill in the printer menu, select "printing photos with white frame" the size of the paper, mentio0n it of "another photo book" and ask for the 'best' quality, and I put a (also tried to put more) page, sometimes it won't pull the paper in all, and sometimes it starts pulling on the paper after the head already done a few scans which means that the image loses almost a full inch of his debut.

  What can I do? of course, work with plain paper I have no problem, and if I go to 'best' to normal, my success rate is improving but is still far from perfect.

  Y at - it cleaning to do? some rolls must be replaced? or what? It is VERY frustrating that the printer cannot handle these quality papers as it should!

  Help...

  Thank you

  Arik

  Try troublshoooting not on this page.

• I have a HP officejet K-550dtn. New wireless n router. I can't get the router to see the printer.

  This printer used to work properly as a network using Actiontec or Linksys printer b/g router.  I upgraded my network for a 802.11n system and I cannot get the new router to see the printer.  After several hours of fighting, I find that the printer configuration page shows its IP address as 192.168.1.103.  Unfortunately, the DHCP server on the new router uses address 192.168.0.100 - 192.168.0.200 only.

  The disc that came with the printer does not work in one of my computers, because the BONE is newer than Win XP.

  Any ideas on how I can change the internal IP address of the printer to something the router will recognize?

  I wouldn't get rid of this printer, since it is always does a great job.

  (I can still print to the printer with a computer server network address to which it is connected by a USB cable, but requiring everyone goes up to this computer before making the print command in order to ensure that it is not hibernation.)  If I can't print directly via the router, I think I will return the router and go slowly until I can't take it anymore.

  Thank you

  Dweezel

  I finally understood that.  Here's how, in case someone else meets this.

  I don't mention that there is a Verizon FIOS router behind the wireless-n router, and it uses the model of 192.168.1.XXX.

  On a hunch, I ping the FIOS router, and there was a response.  The K-550 ethernet cable was plugged into the wireless n router and I tried it ping 192.168.1.103.  No response.  I then connected the ethernet printer cable in one of the connectors of the FIOS router replacement.  He ping again and got 4 beautiful quick returns.

  I moved to one of the computers on the wireless network and checked to see if the printer was there.  Joy!  There were two cases.  One was the connection recently configured via the USB port on the server computer.  The second was through the previously used x.x.x.103 port.  I can print using this forum, and I made it the default printer.

  It had not occurred to me to use a port across the wireless n router.

  Dweezel

• OfficeJet 6500 e710n: my can´t officejet 6500 detect the wifi router, expire after 20 minutes of searching. The network works

  Hello

  I connected to a router Thomson lapttop two stand-alone and two desktop PC wifi printers. As I can connect to the web

  and surf without problem that the router seems to work at least partially.

  The problem is that printers will not find the router, when I try to configure the printers in the control panel printers, they are looking for the router, but they do not find the wifi (router) connection. After 20 minutes, they then expire without something else facilities worked very well before.

  I called the support to my ADSL provider and they remotely reset the router to factory settings initial but it helps. didn t have tried to turn off the router, printer and laptop computers and then started the router, printers and portable - the same problem. I think that the problem is not in the printers that I have the same problems on both printers.

  Can it be a partial problem with the router, I find that it is unlikely that the problem lies in the printers, because they took place att simultaneously.

  It is a mystery to me and any suggestions are appreciated.

  Bo

  Hello

  It seems more likely that the question is based in your router as the problem affects two different printers.

  For troubleshooting end please move the printer near the router, but not too close... 2-3 meters would be at an ideal distance for testing.

  If you don't see the router yet, may is a Dual Band router?

  It broadcasts at 2.4 GHz?

  Pleae also run a Test report wireless one of the printer, it may help to get a better understanding.

  In the Configuration Menu, select network, go search for Wireless Test report.

  If you can join an analysis of the results of the tests, it would be great.

  Kind regards

  Shlomi

• Should I have the router wired to a PC to work?

  Cable-internet Setup told me that if I want the PC not being close to the cable modem, I can «just to get a wireless router»  I try to install, but it seems to want the PC to be wired to the router, which is wired on the cable modem, which is against the goal.  There is a wireless card in the PC and he can see the router as a wireless network, but when I connect to it, I can't connect to the internet.

  Technology forgot to tell me that I need a PC connected to the router separate from that I want to move to another room?

  Or I do something wrong?

  I can't find anything to support that helps.

  Just a wired computer to perform the configuration of routers and wireless configuration.  Once done, you can simply use the wireless connection.  You can even configure the wireless router as long as you don't touch some wireless settings.  If this happens and you are unable to connect, simply connect the LAN cable and start again.

• I have Mozilla Ffox on a Dell Vostro Desktop computer, connected to a HP-Officejet 6500. The printer prints internal drive, but don't print Web sites. The printer ejects only a single sheet of blank paper.

  The version of Firefox 4.0.1 and Windows 7 operating system are
  correctly identified below.
  Still, my printer prints not websites, including Yahoo mail. The printer seems to respond to Web sites, but only ejects a single sheet of blank paper when printing is initialized.

  Just to be sure, everything is covered:

  1. Reset you all the preferences of print.printer , as indicated in brackets in step 2, who were in "BOLD", not only print.print_printer preference?
  2. You you exit Firefox (Firefox button > exit OR file > exit, if you use the Menu bar), and then wait a few seconds and restart Firefox before testing the change according to step 4?
  3. I have a HP 6200 series. Don't forget, if yours is a multifunction printer that you have NOT enabled the fax (i.e., "HP Officejet 6200 series" NOT 'HP Officejet 6200 series fax') in the name field of the printer on the screenshot (CTRL + P).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• My XP laptop sees the officejet 6500 on the network but cannot print on it.

  The diagnostic says HP drivers print program are not installed, but they are. My office windows 7 print very well.

  Hello

  Thanks for posting,

  In order to solve the problem, please check the IP address of the printer and then back to the computer and open the browser. In the address bar eenter, IP address of the printer and click GO or press ENTER. If the XP computer and the printer are connected to the same network, the printer page opens.

  If the printer pages opens, please close the browser and click on start and click on printers and faxes or click on the control panel and click on printers and faxes. In the fax and printers, window, please right click on the printer icon and click Cancel all documents. Right-click on the printer icon, and then click Properties. In the Properties window, please click the ports tab and click Add port and select Stanard TCP/IP port and click New Port. This will launch the TCP/IP Wizard, click Next and in the printer name or IP address, enter the IP address of the printer and click Next and follow the on-screen instructions and click Finish. Click on apply, and then click OK in the printer properties window. Then try to print and check.

• LG 815 / OfficeJet 6500 E710n -: the Android Plugin Printing Service

  I downloaded and installed the latest version of the HP printer for the Android Plugin. Google play shop.  Also, I downloaded and installed the HP All In One application for the Android from the game store.  I can scan FROM the printer to the tablet.  The Tablet, I can access the printer and print network, printer, reports etc.  When I try to print from the Tablet I can select the HP printer and it shows that she's trying to print via the downloaded plugin.  He does everything except printing.

  Any suggestions?

  Thank you.

  Thanks for the suggestion, but after about 6 hours of research and testing, I found the solution of the problem.  On the printer, I went into Setup/web services and reset the value of webservice to the default value of the factory. I was then able to print from my android phone and the android tablet.

  See you soon.

  MauiMax