HP officejet 6500: unable to connect the printer to my Nexus 5

Similar Questions

• OfficeJet 6500 Series E709A: aligning the print heads whenever the printer on

  Replaced print head cartridge-door and put new cartridges.  Now, every time I power the printer, he gets head alignment mode and print a correct page.  I press the OK button and the printer works correctly then.  It is the second replacement in two years.  Had no problems the first time.

  Don't know where you answer correctly on this problem that I reported.

  After trying all the options that have been proposed and did not get a resolution of the problem.

  I tried the only other possibility was not offered.  I bought another head of HP ink replacement

  which is where I had bought that does not.

  The new replacement of HP has solved my problem.  The printer works properly.

  I guess I get out of $70.00 for non-functional replacement, unless someone wishes to

  give me a contact who does not send back them on where

• OfficeJet 6600: access code to the printer does not work

  Hello

  My printer used to be connected to my computer. The computer must be repaired, and I don't have the software to print on it. I downloaded it and I thought that I had everything set up, but when I try to connect my printer to the laptop computer he asked the password that I entered, and it isn't right now. It is also connected to a Windows 7 and works very well with this one.

  Hi @camicam,

  Remember that the password is case-sensitive. If you have not made any changes to your wireless password and you are unable to connect the printer to your wireless network, I suggest communicating with your router or your ISP (Internet Service Provider).

  Thank you

• OfficeJet 6500 a more connected to the MacBook is not found by the HP utility, although it prints

  I recently upgraded to a Photosmart C5280 All-in-one to an Officejet 6500 has more for use with my MacBook.  The installation process was much more difficult that it should have been, particularly wireless configuration stage (the input field to get the WEP code was not active).  Since the installation of the printer that I use a USB connection to print and scan - I prefer to print using a wireless connection, but this feature seems to not work, even if the onboard display indicates that the printer has connected successfully to our local wireless network.

  I installed the widget dashboard and it detects the levels ink correctly, but when I click on the button of the device to maintain on the widget the HP utility warns me that it is unable to detect the printer, even if the printer is offline, and I can print them out and scan using the USB connection.

  I am also unable to print double-sided, which is an important feature, I want to be able to use.  No double sided button "print" or the checkbox appears in the print menu with all the applications that I usually use (for example: Adobe Acrobat, MS Word, MS Excel, MS PowerPoint).

  OK, OK - progress!

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network

  I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.

  I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.

  Any help and advice would be much appreciated.

  If it is a BT Home Hub, they don't play well with HP wireless printers.

  You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Why my HPavillion keep crashing when I try to print using my HP Officejet 6500 has more using the USB connection?

  I tried to update the driver, but couldn't.

  Hello

  1. do you receive any error messages?

  2 have you made any changes to the computer before the show?

  3. who is the operating system installed on the computer?

  4. is this problem limited only when connecting the printer via USB?

  5. what happens when you try to update the driver?

  Run the Fixit and perform the steps mentioned in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I suggest you provide more information about the issue so that we can better help you.

  I hope this helps.

• OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

  I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

  I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

  Help, please.

  Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  

• HP officejet 6500 a Plus E710N: slow printing when you use a wifi connection

  I have 2 wireless laptops connected to my printer, a job and a home, especially from my laptop to print job. This just started in the last days.  When I print, documents will start to print, pause, start, once again, stop and then back up to 3-4 minutes later the document will be printed.  I tried to connect the printer to a socket instead of using a surge protector.  In addition, just downloaded the latest driver and updates from HP.

  Thank you for your help

  Hello

  The first thing you may want to check: ink levels. Looks like you need to buy inks very soon. The second thing: how busy is your wireless network? Please note: your router has a limit and if she is too busy, print job will be delayed or slower.

  Kind regards.

• Unable to connect a printer cable wireless PC networking wireless/wired

  We have a HP Officejet 6500 a more printer (E710n-z)

  Wireless router with 4-port ethernet (2864 SAGEMCOM) - some PC to connect wireless and we have 3 connected via ethernet (network has several printers, 2 netbooks, IPad, 2 laptops and 4PCs currently configured - but with 5 active users change frequently)

  Can't connect the printer wireless to personal computers, laptops, etc.--but could not connect cable PC (running version of windows XP-Edition family)

  I would like to avoid forcing the IP address for printer (everything else is automatic) - is there another workaround solution?

  I have another printer connected wireless two wireless and wired PCs

  Installation / troubleshooting software assumes that all or all wireless's cable network

  I don't mind uses the fixed IP address to install it, but prefer not to use for the current connections

  Thanks for your help

  Nancy

  PS - a computer problem with "serscan.sys' file not found - this can, I think, be resolved once I found download * since no longer have windows XP installation disks

  Thanks - once took me to update my file serscan.sys (fix Windows), I was able to put in place an IP address of the printer (not my ideal solution), but it works fine now

  Thanks for the quick response!

• Have HP Officejet 6500. Wireless connection - scanner does not.

  Have HP Officejet 6500. Wireless connection. The print function works fine. However, when I try to scan a document, the "no scan option" prompt appear. It seems that the HP 6500 does not recognize either (my desktop or laptop computer)? Help

  Try to install the updates and the usefulness of this link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3944627#N956

  mohanad

• CTCE Officejet 6500 Fax Modem connection has more

  ORIGINAL MESSAGE:

  HP 6500 Officjet has more.  Time Warner Cable installed a telephone modem TWC eMTA and split the line of incoming telephone into the wall jack, while retaining the original outlet in Officejet 6500 has more connection as indicated in the manual of HP.

  However, he then disconnected the connection back to Officejet 6500 has more to the telephone base unit, even if the installation HP statement indicates the connection shall be connected directly to the telephone receiver.

  The technician then connected the TWC eMTA modem to the second part of the splitter to the wall outlet.  The phone works perfectly, but in the race a fax test fails a tone detection.

  The fax test print States to remove the splitter and connect the fax directly to the wall socket, but remove the separator is not an option, as there is no connection to the eMTA TWC telephony modem.   The manual mentions also using a digital-analog filter or converter, like the Officejet requires an analog connection.

  My understanding is that the reason for the direct connection from the HP device to the telephone receiver allows the fax listening to the phone line for a tone and a fax signal and respond to the line after 6 rings and to send a fax.

  Don't attempt to send a fax test fax test HP 'No Answer' number statements, which means that the Officejet had no dial tone.

  Suggestions for connections that operate, or what analog digital filter or converter to use, would be appreciated, like TWC has no solution.

  I thought I had solved this case myself by disconnecting all connections made by this technology TWC and followed the manual of HP.  I started with the newly installed separator and reconnected the separator to the input line of the OfficeJet and connected the output of the OfficeJet directly to the phone base unit.  To get the connection telephony TWC, I connected a second line of the second take of the splitter modem telephony TWC (the latter which is connected to the TWC cable output).  Problem solved: NO - Fax tone, a tone phone and yells, but none of the calls incoming.  To get the incoming phone calls, had to disconnect the line from the phone base unit and reconnect the unit on base of telephone modem telephony TWC by result, incoming and outgoing calls, but not the Officejet, so no fax tone.

  =================================
  I am not employed by H - P & I do not look for congratulations, fair solutions.

  Gemini02: Thanks a lot for your attempt to help.  It turns out that he didn't need an analog filter or a converter.

  'Knowledge-information technology-better than you' technology contract for Time Warner Cable didn't know what he was doing in a first step in dealing with the HP Officejet, or much else, as his only totally disconnected from the Officejet actions.

  First of all, to the phone outlet, where the incoming landline connected initially to the Officejet, he installed a useless Dispatcher and reconnected the Officejet to it (a line now dead).  The connection to the Officejet was to be performed to a modem (direct line), Time Warner phone instead.  All of the remaining connections should have been left as they were.  Instead, this tech then connected the telephone base unit Panasonic TWC telephony modem (where a live telephone connection) and the outgoing line of Officejet to the second connection on the split bar newly installed (a deadline) and therefore no dial don't tone for the Officejet.

  As I had no idea about the operation of the outlet now amended, there had me time again unplug everything and realize that the incoming connection was not this splitter connected outlet and , but in fact the modem telephony. TWC

  Connected the Officejet directly to the modem telephony TWC, culminating in the Officejet tone.   The outgoing line the Officjet directly linking to the Panasonic phone plant, leading to the tone at the telephone base unit.  Sent a fax requesting a return fax, resulting in 4 traffic lights and answering machine pickup, and after 6 rings, received a fax.  The splitter is unplugged from the wall dead and thrown in the trash.  The problem is finally solved.

  Thanks again for all the responses.

• officeject Widwe 7500 a format: unable to connect wireless printer

  Installed on the network, installed on the desktop computer. Are unable to meet so that I can print. Have you tried Scan doctor, reinstalled on the computer. Re install printer. Reset the router. Still no joy. My office ject pro 6800 no problem.

  Well, for this issue:

  1. If you have a USB cable connecting the printer to the PC, remove it.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. Click Add printer, and follow the prompts to add a queue for your PC.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet 6500 a: how to adapt a HP Officejet 6500 has so we can print on both sides

  Hello dear hp team

  I have a HP Officejet 6500 has more that color print on both sides.

  Now, I have only a 6500 a which initially can print one side.

  I changed the room in the back (I put the piece of the 6500 has more printer) so that mechanically, he has the ability to print also the two sides.

  Now how do I program the printer so that it detects that he now has the ability to print on both sides?

  Thank you for your reply and sorry for my English mistakes.

  A student of the Swiss school.

  Hello

  As suggested in the post above, only available for the printer manual duplex printing.

  The accessory of the duplexer is designed only for he 6500 more than model a, it is not intended and cannot be used with the model 6500 a, as you can find below:

  Suitable only for HP Officejet 6500A Plus e-All-in-One Printer - E710n
  

  http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-6500A-e-all-in-one-printer-series---E710/4083974/model/4083869/document/c02492482/

  Shlomi

• . HP Officejet 6500 E710n-z won't print BLACK

  HP Officejet 6500 E710n-z won't print BLACK usining Excel 2007.  I don't think it's a clean printer, but was jump there ' All could have at least a direction for a fix or solution

  Win7 full cartahers printing.

  Thanks for the reply with more information.

  what you did may limit the possible cause. at least we know that this problem is caused by excel, below is a workaround solution that you can try:

  Looking at the 'Print Preview', confirms is the black appear or not.

  More top issue will be useful for further refinement.

  Copy / paste from the old file by excellent:

  1. create a new excel file

  2 paste special

  3 'text' only

  4 repeat the format will help.

• IPhone 4 and Iphone 4s, not being not able to pick up officejet 6500 a - 710 to a printer while

  IPhone 4 and Iphone 4s, not being not able to pick up officejet 6500 a - 710 to a printer while

  my mother bought two, one for him and for me, I set his first, then returned to do mine.

  I managed to print ONCE! His works very well.

  I created his exactly the way I created his own. The other difference is our routers.

  I have not hers, not mine wired to the computer.

  I have reset the router, phone, computer, internet, printer box! its on the same WiFi as the computer and phones.

  the software is updated on the phones and the printer.

  I have a linksys router rangeplus wireless model # WRT110<>

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.149.  We will use 192.168.1.200 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -Enter for the first DNS 8.8.8.8.  Enter to the second DNS 8.8.4.4.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.