OfficeJet 6700 ink bleed when on glossy or matte paper

Similar Questions

• OfficeJet 6700: Ink yellow

  I just replaced all my ink cartridges.  My yellow ink is not printing.  I cleaned the heads, but no luck.  The old yellow cartridge not print.  Help?

  Hello @ThruHiker,

  Welcome to the Forums of HP Support!

  I understand that you are not able to print Yellow on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help you to solve this problem today. Now, I know that you have tried 2 yellow cartridges and cleaned the printheads without result. At this point, I will guide you through some additional troubleshooting steps. However, there is a chance that the built-in to your HP Officejet printhead mechanism may be defective. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head is defective, your printer printing system is defective and a whole unit replacement may be necessary. By saying this, please follow the steps below so that we can work together to identify what is causing this problem, and ideally to solve this problem.

  First of all, I have to print you a standalone print quality Diagnostic report. This report will let us know if you're affected by a software or an issue on the computer, or a hardware problem with the printer.

  How to print a report of diagnosis of print quality:

  1 load plain white paper in the input tray.

  2. on the printer control panel, press the right arrow key () to display more options.

  3. press Setup (). The configuration Menu is displayed.

  4. press the arrow down (), and then click reports.

  5. press on the report on print quality. The test page will print.

  

  1 - information about the printer

• Office Jet Pro 8000 print quality is poor on glossy or matte paper.

  My printer is 2 years old.  Glossy is the verticals a (drum lines?) and greased and never heals.  On matte paper, it is dull and lack of color.  I tried a lot of papers.  Is this a problem of printer or paper?  If it's a problem of paper what paper should I use?  I need to print photos for my work to show to customers within a short period of time.

  About the default settings, can you go to print and the following information:

  Default paper Type/media type:

  Default paper size/media format:

  Print quality (Normal/best/best):

  Normally, if you do not specify at least the type of paper, the printer thinks it's printing on plain paper. The delivery of the ink is different for each different type of media.

  Try to adjust this setting and see if printing comes out better. If it (the problem) you can make a shipped printer scheduled for these parameters, so that whenever you print on paper (insert type/manufacturer of paper here), you can use the preset for auto-set the driver accordingly.

• Faxes sending Officejet 6700 Premium [851648] of the control panel of the printer (form)

  I have a problem with my printer HP Officejet 6700 Premium [851648] when sending a fax using the control panael (screen) of the printer. It quickly shows me a blue screen with a power icon and a Error Code: "B82658AC". It shows a masseg tells me to turn off the printer. But when to send a fax via the HP utility program, sends it without problem. This is the first time to send a fax after the purchase of the printer. I did the Test and show me that everything is OK. My printer is connected directly to the telephone line. I just want to now how to fix this problem, thanks.

  Hello! Welcome to the @Mu96aFa forums

  I read on the fax number you are having and I personally would say the troubleshooting guide below for you. The guide check all connections fax, settings, etc..

  Can't send or receive faxes

  Also, check and update the firmware if necessary: having the latest Firmware and product updates

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see other possibilities for you, as a replacement or trade. If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada, region of: click here.

  Best wishes

• Ink cartridges for OfficeJet 6700

  Yesterday, I bought a printer/all-in-one HP OfficeJet 6700 Premium.  Ink cartridges keep popping out when you put them in, and even when they stay in the machine says no ink cartridge have been installed, then it will not print anything.  The printer print a few documents for me yesterday so I don't know that I've implemented the machine correctly.

  What happens here?  Is there a quick fix for this problem, or do I have a "lemon" on my hands?  If the latter, who do I call to return the printer and get a full refund of the purchase price?  Thanks for your quick response.

  Hey, Ciara - thanks for your quick response.  I spoke at length yesterday a representative of the HP (Tina) customer service - which was fabulous and we both concluded after several attempts installation of the cartridges in my printer mechanism was faulty.  HP spent night news to me I'll install later today.

  The problem is purely mechanical: my printer cartridges were not "snap in" at all, such as the printer didn't know they were there.  They were also burst its place inside the machine each time the cartridge belt moved back.

  If the problem persists with the replacement printer I let you know directly that they have a 'lemon' on your hands with this model HP.  Thanks again for your help.

• How to take the printer ink cartridges OfficeJet 6700 cart

  I have a printer of HP all-in-one OfficeJet 6700.  When I inserted a new cartridge, there was a false message that says the cartridge was exhausted and cannot print. I tried 3 times with 3 new cartridges with the same result, so I called HP Support. They sent me another printer parts and missing parts had to come from my old printer.  I need to remove the old printer ink cartridges carriage and install it in the HP an Envoy.  I can't seem to understand and am afraid to break if I push or pull to hard.  Does anyone know how to do this?

  HP technicians two first talked on the phone told me there was a lock on the side to get (that I never found).  The third stopped in the middle of our conversation, he looked up and said that HP 6700 printer ink cartridges carriage is not removable.  Thanks for your advice and I hope that this information might help someone else. - Paw - Paw

• OfficeJet 6700 Premium: System/0X610000F6 printer ink error

  I get error 0X610000F6 when you try to print. I went through all issues of troubleshooting on the HP support page. I need help! I don't see paper jams and I replaced the cartridges.

  Hi @Kutz8888,

  "I see that you encounter the error" 0X610000F6 "on your HP Officejet 6700 Premium e-all-in-one printer. I will definitely do my best to help you.

  This error indicates a Jam transport.

  Here is a document that I recommend that you try, HP Officejet 6600, 6700 Officejet printers - 'transport Jam' Message displays.

  Note: If you have completed all the above steps and your product still has a problem, service the product.

   

• HP Officejet 6700 Premium: Scan function screen does not come to the top when selected

  After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.

  Hello

  Thank you for using the forum.

  You have downloaded and installed the FULL features of HP software?

  Here is the link for convenience:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930O2

  We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• OfficeJet 6700 Premium Cup footnote when printing from the computer

  OfficeJet 6700 Premium all-in-one - H711n - when I print wireless from the desktop (HP), I get an extra space at the top of printed pages and the bottom is cut off.   It is a new problem.  Printer did not have this problem in the past.   Scan doctor says everything is ok.

  Hi @katy36 and welcome to the Forums of HP!

  I see you have output problems.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Also, do you have questions by making a copy as opposed to an impression?

  Please let me know what you find. Thanks for posting on the HP Forums!

• OfficeJet 6700: ADF works only when you scan not copy

  Our officejet 6700 has an irrational problem - will take the ADF and scanning a document using the pc without problem, but if load you something using the function copy on the machine itself, he acknowledges that he is a responsible original, you hit copy and is not feeding the sheet through and copy from scratch!

  Any ideas?

  Thank you

  Hello @edtech,

  Welcome to the Forums of HP Support! I see that you are not able to use the ADF on your HP Officejet 6700 Premium to make Copies, but you can use it to perform a scan.

  I would like you to do a hard reset:

  1. disconnect all cables and cards of memory in the printer. Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.

  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup because they can cause the printer to lose over time basic functionality).

  5. connect the power cord to the back of the printer.

  6. the printer should automatically power back upward. If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  Are now able to make a copy using the ADF? If you are still unable to make a copy, you will need to contact our technical support at www.hp.com/contacthp/. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• HP OfficeJet 6700 prints page 2 upside down when you select double-sided printing

  Product name: HP OfficeJet 6700 Premium

  OPERATING SYSTEM: OS X 10.8

  * Latest firmware installed

  * Installed drivers from HP

  Printing works fine, except that when you select print double-sided on the back page is backwards.

  I tried using the 'Long' edge and "short edge binding", but it's not changing anything. Yes, I save the settings.

  It works OK under Windows 7.

  Hi Geert,

  Sorry, it supposed to be 'Sign', have no idea how it came as such a typo in

  Update of the OS before the Officejet is not enough, these updates are owned by the operating system.

  The HP update printer driver is also provided via Apple Software Update, an update, you did before having unit did not have the HP update as there was no HP devices connected to your Mac, so please be sure to follow these steps both to update the drivers of HP.

• All-in-one Officejet 6700 Premium does not work when a cartridge is empty

  On my officejet 6700 Premium, I have had trouble since the magenta cartridge was missing.  I'm unable to print even if you select using black only, it appears on the screen that gives me the choice to order or cancel, it gives also this pop up if I try to scan documents to save to my computer and even trying to fax.

  I am currently using Windows 7 Ultimate service pack 1

  I am at a loss on it and a plan to buy a cartridge, but in the meantime all that I need is to use black and also to scan documents.  Is there a way around this issue?

  I'm sorry that you are experiencing this issue.

  You will not be able to print WITHOUT this magenta cartridge. Some printers (older models) can print certain colors without another cartridge in the printer. The reason why it is not printing because this magenta blends in with all the other cartridges to perform a true black.

  So if it was another cartridge, it would give you the same error message and do not print.

• OfficeJet 6700 Premium: cartridges of OEM 933

  I was told that this printer is perfect for printing low volumn.

  I'm on my third set of ink cartridges, including the black cartridges scence XL that I print almost exclusively in black.

  I get about twenty pages until the cartridges need to be replaced.

  It is a joke.

  HP Announces hundreds of pages, but you get to price a little and then another ink cartridge. He used ink color, even when printing in black only.

  I pay almost $1 per page, with this cartridge.

  Dave708 wrote:
  

  I highly doubt that HP will do anything with a machine that is out of warranty for more than two years.

  It becomes cheaper to buy the printer to price low and throw it away when the ink dries.

  There is nothing you can do.   Read the comments here.

  http://www.Amazon.com/HP-OfficeJet-6700-premium-wireless/product-reviews/B006M1MSKG/ref=cm_cr_dp_see_all_btm?ie=UTF8 & showViewpoints = 1 & SortBy = Recent

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection

• OfficeJet 6700: crazy feeling strong

  I did all the truble don't shoot... no jam, restarted, lined up, cleaned up, rolls is very well... etc started 2 days ago. This isn't normal snoring and the Clank of a hp printer. I'm on a hp Pavilion using windows 10. Yes, I did all the updates that are proposed.

  I guess it will just give the ghost uop and soon to expire...? !

  Hi @Emc161,

  Welcome to the HP Forums!

  I see that your impression is very strong with your HP Officejet 6700 printer on Windows 10. And I'm happy to help you!

  It doesn't sound like you did more troubleshooting already. I recommend you to check the steps in these guides:

  1. A Message "Paper jam" error display on the HP Officejet 6600, 6700 printers.
  2. An "out of paper" Message appears and the printer is not Pick Up or paper feed.

  Just in case where measures have been missed. Otherwise, if you have done these steps, proceed with the following:

  1. A hard reset by accessing this post, How to perform a hard reset, by @Rich1. It is important that the printer power cable is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  2. Make sure that the firmware of the printer is completely up-to-date. The printer updates for HP Officejet Pro 8600 (N911), 6600 (H711) Officejet and Officejet 6700 Premium (H711) e-all-in-One Printer Series.
  3. Check your messages for the steps to restart full semi. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If these steps and guides do not resolve your problem, the printer will need to be repaired / replaced. Please contact HPtelephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."