OfficeJet 7612: Margins printer Officejet 7612
I have purposely left for info OS 'unknown', because I have this same question if I use my Mac, my Windows machines, or simply walk over to the machine and copy something.
The minimum margins announced for this printer are something like 1/8 "without going without borders. No matter what I print, I get approximately 5/8 "high and low and 1/2" on the sides. I have this same problem when copying, that is simply built into the machine - no computer involved. If I try to copy both side on a single sheet of double-sided sheets, it crops out of the margins to adapt to these ridiculously high default settings.
I searched through the forums and found many others have this problem. The son always look like this:
Q: I have a problem with my margins.
A: go to the tab 'Advanced' in the printer driver, then select "Minimize margins".
Q: How do I do that? I can't find this option anywhere...
A:
Q: Hello? I still need an answer... A:
Does anyone actually have a solution to this? Or is HP just to admit that their big, fancy, expensive printer large format is just a big pile of uselessness of big margin? UPDATE: Tags: HP Printers The url of the problem page is shown below. When the 4 additional columns will have been completed and sent to the printer, the left margin is 3 ", which does not show the 2 right hand colums in portrait mode. In my first attempt (Firefox 6), he did cut the 2 right columns, so I followed the advice of the-edmeister and changed to landscape. Then I reset my portrait layout and with "Shrink to the width of the page" checked, all 5 columns show in portrait view. margin printing in OE6 problem Left margin to 1/8 ", could not be restored to the original Outlook Express uses the same as Internet Explorer print engine. For print size: IE | View | Text size | Carry out the adjustment. For the margins: IE | File | Page layout. Default is 0.75, (19mm), all around. I tried to print business cards. No matter what I try printer is the addition of a Photosmart HP 6520. 5 "to all margins, I put in the document. I does not matter if I try to use a template in Word or add it from the online site Avery or whatever if I use plain paper or paper of the card. How can I get the printer to read only the margins that I put in the document? Looks like you have a problem with getting these cards printed borderless. Check this page first to make sure that you follow the instructions on the activation of printing without margins on your device: http://support.HP.com/us-en/document/bpy21049 Let me know how it goes! -Spencer PS have a wonderful day! Just bought an Officejet 7612 specifically for printing photos without edge of 13 X 19. I use Windows 8.1 and tried 5 different paint and photo printing programs. All programs list the same options of paper size for the 7612 (choice 2 choices, and 7610 series watch regular and fax printer). The only options for 13 X 19 or A3 + with HP advanced paper selected photo is low-margin. I went to options/settings and selected the printer printing without margins, but all attempts to cause a small margin. I don't use HP Photo Creations because he won't open a TIFF, which has better quality than JPEG, GIF, BMP, PNG, offers the only options Photo Creations. There are choices for edge to edge printing, but for the smaller paper sizes. I lose paper photo cheap and need help to resolve this. Thank you Welcome to the Community Forum of HP. Stop wasting your expensive paper right now. I can't read this correctly - you may not be able to do with the 13 X 19 inch Photo paper. Take a look at the Plug - plain paper for this size, YES - printer Photo Paper: not-so-good. If you can't, don't shoot messenger. I hope I'm lazy-brain. Reference: Install the full features software - printer Click on the thumbs-up Kudos to say thank you! And... Click on accept as Solution when my answer provides a fix or a workaround! I am happy to provide assistance on behalf of HP. I do not work for HP. Photosmart 5524 duplex printing margins issue Hello Just bought a photosmart 5524 printer. Everything seems ok to start, but have you noticed (with a previous user) who come to the margins when printing on both sides. It seems to be to reproduce the same problem as the previous user, but I followed the resolution proferred in this thread, and the problem persists. I am running Windows 7, get the number of Word and Acrobat Pro 11 13. I tried to change the settings of the printer, as suggested in the thread precedent, but if these are defined that only, I don't get the option to print on both sides. If duplex is set, I have the option when I select print in the program, but the margins are narrowed. My apologies if this has been resolved, but the only thread I can find is the only one I want to talk and this does not seem to resolve. Any suggestions gratefully received... Hello! Welcome to the @JerryWest forums. I recommend that you check the link to the message below and read what Bob Headrick suggests the concern of margin print: HP Photosmart 5520 - how to set printer preferences to print at 100%? I hope that it helps, have a nice day HP7510: When you print photos they come out the right size. Today you have the printer and it works well with the output of good quality. However if I try to print a MS Word document that contains a picture the photo comes out to about 120% of full size and overflows out of the page. Any ideas? I am an experienced user and have tried all the usual remedies. OS is Windows 10 MS Word 2003 (yes I know it's old :-)) Odd. Rats. Office Word 2003 is no longer supported. File Windows 10 libraries system files and the links that connect dependencies (programs needed by desktop software and printer) changed - 'something' may be missing or damaged. Regardless of the new file system Windows 10 and how he 'sees' a Word 2003 document, the question could be attributed to the program from the printer itself - a tiny missing statement which translates not correctly size the image, position, limits. One or more of the following could reverberate - results, of course, depend on the cause of the problem (still unknown). If one of the changes to trigger a file change internal - or how the document and the image are translated by the printing software - while change can help solve the problem. Ideas - I hope that these apply to your Word Vintage: Control Panel > display icon > devices and printers > Right-click Printer > Printing Preferences > tab Layout > advanced > On the printer side tab > preserve the page layout (select) Yes > OK I've probably missed something - if I have 'find', I'll post back. When you see a post that will help you, Who inspires you, gives a cool idea, Or you learn something new. Click the 'Thumbs Up' on this post. Fixed / responded? Click this post accept as Solution to help others find answers. Photo printing without borders on an Officejet 7612, since a Win 8.1 desktop Just bought a new 7612 Officejet, was wanting to a printer with the ability to scan and print 11 x 17, which is what attracted me to this (as well as how much the prices sank on the printers large format in recent years). This printer replaces an Officejet 7310, which eventually gave the soul. I was setting the printer to the test this weekend to try to ensure that everything works and I found a problem. I can't select borderless photo paper 4 x 6 when I try to print photos. I'm running Windows 8.1 on my desk and always uses the same printing software photo that I used for the 7310, who is the Manager of Office 2010 photos. When the 7310 worked, I could select 4 x 6 borderless paper from the menu of choices different paper drop-down. Now with the 7612, I choose paper 4 x 6, but without the border is not an option. This means that when I print pictures, I have a 1/8 "to 1/4" white border all about photography. 7612 driver isn't set up for printing without margins? Yes, the selection of the type of paper is HP premium photo paper, since it's what I use, but I tried other selections of photo paper and still no selection for printing without margins. DRM for your help, Paul Fixed. I used the chat on this site feature to speak with a HP technician. He took control remotely from my computer and re-installed the driver and went through the Setup and now its photo printer, at least for 4 x 6 borderless. I think I have what he did differently from me is to change the Fax printer to printer in the 'print options', while in the printer and devices window. I think that's maybe where I made my mistake, in even if he printed paper copies, he used the fax settings that apparently do not allow printing without margins. So anyone who finds this problem with their 7612, I would try this first. Paul Border background printing problem Hi HP_User, I looked at the patch you mentioned in your post and it says ' accuracy margin print: solves the issue of the last line of text is cut for HP Deskjet D4200 ". So, it looks like the fixed part of the margin of the patch is specifically for the D4200. Have you tried to disable bidirectional support? Problems printing my worksheets in Excel Hello. I have a strange problem with my print Excel. I put all options correctly page Setup and printer properties. (A4) paper size, landscape, to the scale (100%), quality (600 dpi), Margines, print and there is no specific area chosen as the print area. And all the corresponding options in the printer properties are correct. So I'm a little outside my area expertise (printers, etc.), but I checked on the HP site and they have released a new driver for this printer a few weeks ago, so I strongly recommend to download the latest driver from their site and then try. Driver update tend to often fix weird problems, isolated like this one... sometimes they derive by using different fonts, and they will update the drivers to adjust to this. HP ENVY 4502: Off duplex printing? Hi, I just bought my printer as a few hours ago and I was really excited, but there are a few problems. I mean I have Microsoft word 2013 first and I don't really know why, but when I click on the button print in the application, it closes the window options and brings back me to the page I was working on that but it does not print anything! So I bypassed this problem after a while of troubleshooting and found that if I right click on my document I can print it! So, I printed my document. The problem persists, I am printing on the front and back images and I want they to be centered precisely but they are off from each other by like 2 cm so when I cut them parts of the image on the front or rear they are missing. I've lined up perfectly in word and they are centered as follows. Is there anything I can do to solve this problem at all? Thank you. OK, everything is OK I gues, I remargined photos in word to fit the error of margine printer now, everything is alligned. Solved but still I'd like know what this error of vegetable in the printer, but at least it works. I lost all my good ink As 7612: 7612 OfficeJet printer fails to update Hello I have an officejet 7612, who continues to try to update web served before eprint and apps. He tries to update, fails with a message from the white screen of restart. It of now happening every day and is getting really boring. I can't stop him trying so I'm just constantly reboot the printer. Please can someone help. This is driving me crazy Thank you Neil -Very well, make sure first that the printer is plugged directly into a wall outlet, not a surge protector. Once done: Please let me know if it solves your problem. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post. HP OfficeJet 7612 e - AIO: DUPLEX PRINTING OPTIONAL &; STANDARD Hello What does the 5.Lubrication Duplex printing means for HP OfficeJet 7612 e - AIO. Hello This means that a user can choose to buy it separately (as an option). The owner of a HP Officejet 7610 can buy the duplexer (optional) to activate automatic duplex printing. The HP Officejet 7612 comes with the duplexer as standard (in box) Hope says. folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer Name of product-Officejet 7612. Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop. Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top. The folds will be straight through. Whether it's origami, it would be the perfect machine. When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.) It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently. Any thoughts? Hi @Bodija , I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you. When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17? Here is a document to clean the rolls of paper to see if that will help. A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610. Go to Solution 5: clean the rolls of paper. Using the full feature software drivers? Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers. Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer. If you still have problems with it is software related, try the following steps. Fix permissions of the drive on the Mac: Close all applications. In the Apple menu, click OK, click Applications, and then click utilities. Double-click disk utility. Highlight your hard drive / partition on the left. Click on check and then repair disk permissions. Restart the computer... Reset the printing system: Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol. Click on the Apple icon and then click on System Preferences. Click on Printers & Scanners. Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system. Click OK to confirm the reset. Type the name and the correct password. Click OK to reset the printing system.
Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button. Try to print again. How the name of the printer was placed in printers and Scanners? If you need help, let me know. Have a wonderful day! "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges. HP has a center of service to Puerto Rico, where I live? Please tell me there is a solution for this problem. In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612. WiFi doesn't connect properly &; apps not updated by wifi Mr President When I update 9.3.2 wifi doesn't connect properly & apps not updated or installed via wifi and battery low.icloud does not Satellite A200 - boots motorcycle cycle Post - in touch with Toshiba tomorrow HelloI have a Toshiba Satellite A200 when start does not get past the message, get you the commercial display of system "In Touch with tomorrow Toshiba" press F2 or F12 for the boot of friends menu. The blue bar get about 3/4 of the way through, then HP 240 G4: Low Wifi Signal-need solutions My hp 240 g4, he grabs the wrong signal regardless of the router is near lightness of my laptop.very less and poor signal.even it disconnects if I take my laptop to the other House in addition to router.WiFi adapter: Broadcom 802.11nHardware driver p How to remove an MSN account? Network discovery sharing sharing inbound network incoming Remote Desktop RDP TS Remote Desktop Remote Assistance Network * E-mail address is removed from the privacy * is no longer a valid email... the woman... my mother died on May 6, 2010... recen Cannot delete folder: it has been used by another person or program Can you help me please. How can I delete my folder when its says "' cannot delete the _: it has been used by another person or program" " the problem is... it has been unused by another person. What should I do?
To try to solve this problem, HP went up to sell me a replacement printer reduced at a reduced price, even if mine was out of warranty. Their thinking was that I had a defective hardware. Unfortunately, new printer = identical questions.
In the end, they admitted that margin problems are directly related to the duplex unit. Their duplexer requires, apparently, a LOT of paper to hang on to MUCH - in my opinion, possibly a lot and a half. I studied other brands and found that most of them have this same problem.
Most of them...
I finally found that printer large format of brother did a duplexer that keeps the small margin when you work 2 faces. So, I own one of these now - works great.
I have been a fervent and loyal HP - ite for literally decades. It saddens me that they let slip until the brother surpassed them - but that's what I found. I hope that HP will turn around and stop to accept half-solutions such as 'negotiable' - but in the meantime, the only way to solve my problem was to jump brands...Similar Questions
Before installing latest versions 5 and 6 of Firefos all columns have been printed.
But I always get a bad my printer output. The table is cultivated most small to the right.
It applies also to say that all my printer drivers are correctly installed. Because the printer works well with all other software. The printer is HP Laser Jet P1505.
I thank you a fortune I help me with this problem.
I doubt that there is a framework, that would be something you would remember changing and usually don't vary according to the print job.
In fact, out of curiosity, if the updated driver does not resolve the problem, you could try change fonts on the worksheet and see if you get a change in behavior (standard use something like Helvetica, Times New Roman, Arial, etc.)
Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.
Thank you.Maybe you are looking for