OFFICEJET ML411 PRINTER 100

Similar Questions

• HP Officejet Mobile Printe 100: Almost nine Officejet100 HP printer does not print black ink cartridge. No low or empty light show

  My 100 Officejet is less than 12 months old and has been rarely used. So far, it has printed perfectly. Now, it will printer color points, but don't print the black ink cartridge.

  There is no light showing on the Control Panel indicates that the cartridge is low or empy. Also, printing little that was made, it is impossible that he be empy so early.

  Someone at - it suggestions?

  Thank you very much.

  Hello and welcome to the community of HP @Pete226,

  I understand that you can not print black ink with your HP Officejet 100. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Mobile printers HP Officejet 100 (L411a and L411b) - solving print quality problems

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• HP Officejet Mobile Printe 100: Bluetooth pairing

  I have a LG-D500 4.1.2 android. feature phone that I'm trying to pair it with my new 100 HP mobile printer.   The bluetooth of phone detects the printer and then ask a PIN as 0000 or 1234.  None of these base pins are accepted by the pairing process.  Need help to get matching conducted, or a way to get around, so I can use this printer on the road.

  I also installed the application "Printshare.  So, I'm ready to go.  Just I have to get this dang thin pin situation.

  Hello

  The ships of the printer with a predefined access key that is set to six zeros '000000', tyoing this password should allow to connect to the printer.

  If you encounter problems, you can also reset the Bluetooth settings as follows, a reset will set the password as "000000" as the default:

  http://support.HP.com/us-en/document/c02643374/

  Shlomi

• Large HP Officejet 7110 printer: hp 7110 mirror image

  Before I bought my HP Officejet 7110 printer wide I was assured by HP that it prints in mirror Images. I replace 2 HP 9800 large printers that I used to print pages 200 + strictly mirror since 2008. I worked with this HP 7110 printer all day by train so he can print Mirror Image but I can't seem to find the option anywhere. I got the instructions from HP that looks very closely the HP 9800 printing preferences. The Hp 7110 not the same options as the HP 9800 has!  I was told that I have to connect wireless to get the options to print mirror Images. I have connected wireless, but it does not give me the option to print mirror Images. Does anyone know how to print with the HP Officejet 7110 printer wide mirror Images. Is there another printer driver that I can use and if so how do we install it to make the HP 7110 to print mirror Images. Mirror = images printed image is back. I print on vellum to print plans 9 "x upto 100' for production of oil field logging and the printed image must be on the back to print clear plans. Unless someone can suggest a way I can print 100 continuous feet on my computer then I need to print the mirror image at all.

  Tasted it. Do 200 times per month. It is very time consuming.

  If founded a solution on my own. I just tried plugging the HP 7110 and installed the drivers from HP9800.

  It works now, I have a HP 7110 printer called HP 9800 printer. My HP 7110 now works exactly like my old HP9800 did.

• HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

  After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

  That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

• HP Officejet 5740: The Officejet 5740 printer is sending a document feeder of error message cannot read original documents

  HP Officejet 5740 printer sends an error message indicating that the document feeder could not recover the original document.

  Hi @angelahouser042,.

  Welcome to the Forums of HP Support!

  I see that you have problems in your ADF on your HP Officejet 5740 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I recommend that you follow the steps in this guide:

  • "HP ENVY 7640, 5740 Officejet and Officejet 8040 e - all-in - One Printer Series - a Message ' Out of paper ' is displayed on the control panel and the printer doesn't pick up paper

  Please follow: step 3: clean the ADF rollers and separator (optional) buffer.

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

  Hello
  My all-in-one HP Officejet 4355 printer start suddenly feel very very slow! I've had it for 4 years, and God never gave me any problems (maybe minor once, but never really made me mad), as I used it very often at home and at the office. I always buy the HP original ink cartridge (only once, when I wanted to see how works the charging - it's not) and now the last cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page now it will take 10 to 15 minutes. Could someone suggest help?
  Please don't talk about the computer/Windows/USB settings, they all work very well. I unplugged the printer from the PC and don't "align the print cartridge. First step, the printed area, took 10 minutes, second step, part of scanning, does not pass. It says printer cannot allocate the alignment page...
  Moreover, I did look around for answers and found that some people say it's a fault of the ink cartridge. But I used this cartridge for a few months now, it's almost, but not yet finished, it was perfectly up to printing. Impressions during this issue come out OK, 7 out of 10.
  Anyone have any ideas? If I could attract professional assistance of technicians of HP, it would be perfect.
  
  Thank you.

  © RedStarLimitless ©

  Although they still ink cartridge may fail and give the results you see, where the printer made a bandage and wait 10-15 seconds for the next Strip. This is caused by the failure of one of your cartridges.  Remove each cartridge and clean the contacts on the cartridge and printer can solve the problem.

  I don't remember if the Officejet 4355 reserve mode supports, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• OfficeJet 4622 prints not Windows 8, but will print from Linux

  Hello world

  I have an OfficeJet-4622 printer set up on my network (wireless) and two computers. The first is a portable computer running Windows 8, and the second is a desktop running Ubuntu Linux. Both have HP (and HP Setup) drivers installed. When I try to print something from the Windows 8, it will start printing and then say that year error has occurred. The print will be print part of a page, nothing or half of employment and a white sheet.

  However, if 'copy' of the printer, or print from the Linux computer, everything works fine. One thing to note is that I'm using remanufactured cartridges, but they should not cause a problem on a single computer only.

  I am at a loss here, so any suggestions on what to do to solve this problem are greatly appreciated.

  Thank you and have a nice day.
  Patrick.

  I think I solved the problem eventually. On one of the posts of post-its, it linked to a page where you can use the automatic installation wizard. I did, and it reinstalled my driver (s). He had said the previous installation was not completed successfully. So I'll try again to print. The print came out fine. If the previous installation must have been the problem.

• HP officejet 6500: HP officejet 6500 printer

  My HP officejet 6500 printer do not print one color... .we just put new ones in... He took command of printing and the paper comes out of the Virgin.

  I went to the HP support team and they had a video to help with "Troubleshooting", they showed me how to reset my printer.  There were several options which I had already tried... so I did the reset partial... .or you unplug and wait 20 min... then hold it at the same time # and number 3 and reconnect the power chord at the same time... It took 7 minutes for the printer run the test of the colours that mine passed... and my printer works now!   Thank you very much.   HP team

  Ma-donna

• OfficeJet 4620: printer keeps going offline

  OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

  I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

• HP Officejet 6500 e710n-z principal: impossible to completely remove the software after the replacement of the HP Officejet 6500 printer

  I replaced my Officejet 6500 printer and removed the software using the 10 software removal tool windows.  The software has been removed, but a message appears everytime I start the computer saying that the software cannot find the 2 support files.  I can turn off the message and continue the start up, but it's still a nusiance that I would rather not deal with every time I start my computer.

  Hello

  Open Windows Explorer and type the following in the address bar:

  %AppData%\Microsoft\Windows\Start Menu\Programs\Startup

  Remove the shortcut to "Monitor alerts ink" and restart your PC in order to ensure that the error no longer appears.

  Kind regards

  Shlomi

• HP 8600 officejet pro printing issues

  Hello

  I have an officejet pro printer hp8600.  I have connected to a network. I had to reinstall Windows 7 64 bit on my computer following an accident.  This meant also to reinstall the printer drivers as well.  I am able to print from Word, however I can't print from internet.  I get this message: "there was an internal error and Internet Explorer is unable to print this document." (Internet Explore 11) I downloaded pint and Scan Doctor 4.2 and made 'issues of difficulty printing' and all checks very well.  In my view, that the problem is that I can't solve my printer because it has a warning sign in my area "devices and printers".  When I run the troubleshooter, it is said that it cannot identify the problem.

  Thank you

  Deflace

  Thanks for your response, Deflace.

  Understand that you have reinstalled the software.

  For troubleshooting further, could remove you & reinstall the driver software according to the Guide to ensure that the software is installed correctly.

  Please help make sure that you get the latest Firrmware and update by the link as well.

• Since the end of the Windows 7 upgrade my HP Officejet J4500 printer will not print. Error Msg said "did not supported operating system"? Do I have to buy a new printer?

  My HP Officejet J4500 printer prints are no longer the documents since the installation of Windows 7?  Msg error starting of installation has the operating system not supported?

  Your problem does not have Windows Update features (compared to the upgrade of Windows).

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• OfficeJet 6500 printer E710n-z: Officejet 6500 E710n-z printer is not printing but it says printing doc is printing

  Hp Officejet 6500 printer - E710n - z does not print documents from my PC but will copy the documents placed in the tray of the printer. I set it up as a network printer with a wifi modem in another room. I used the Control Panel, click right in the image of the printer and done research failure, checked the driver (this is the last) and the control panel tells me that the document prints, but nothing happens. I am trying to print with margins of 0.5cms word documents. I tried with 0cm margins and some print and others don't which is the reason why I changed the margins to 0.5cms. I get a warning that the print area is greater than the margin and that some of the document will be lost, but that's okay for me because I am a printing table and you want to cut the paper along the lines of the grid.

  @Marmalade2,

  Looks like it might be a problem with this document, the settings or with Word. Are you able to print from other applications/programs?

  I would like to continue you here: How to troubleshoot printing in Word failures

  I'll watch for your reply.