OfficeJet Pro L7680
A cartridge print head that needs to be replaced would my scanner don't Scan only partially?
I am trying to scan something to my computer and have only parts, the rest is black. I need a new cartridge printhead also, but I didn't know one could affect the other. Any ideas?
While the top half inch is not black? As I understand it, is the rest of the page black?
If you do a scan or copy, you see a bright light under the lid? You may need to lift the cover slightly to check, but you should get a white light shining extemely, i.e. which scans the item. If there is no light there, then what has been "digitized" will be black, as a bathroom at night without a light source. Basically the same idea, where it only would light up the point then it cannot 'see' what he's trying to copy/scanning.
Tags: HP Printers
I have a few PCs in a network running on Windows ME, and I would get very BASIC printing, connect to a HP Officejet Pro L7680 all-in-One color in the same network. I don't have scanning or fax, only very basic print options. Suggestions how to recover a basic driver?
Thanks in advance
All you have to do is to add a TCP/IP printer to the printers IP address port and install the HP Deskjet 990c printer driver included with ME (?). which should help you to print.
Original title: HP Officejet Pro L7680 All - in - One
I started my printer and it won't print in black. Don't copy in black no more. Test page does not work and the color works very well. I changed all the cartridges, so it isn't the ink... No idea what is the problem? He served 6 months off and disconnected.
This forum is for comments on the Forums for answers and you should ask at your
questions in the Windows Forums for answers corresponding to your version of Windows.
Answers - Windows Forums
It also helps us to help you if all the useful information.
How to ask a question
In this case you should check with HP Support, their documentation online and drivers,
and ask questions about known issues in the forums of HP.
Support HP & drivers
I hope this helps.
(NOTE: you don't list Windows 10 64-bit under the above operating systems.)
I have an OfficeJet Pro L7680 AIO running Windows 7. It has been a wonderful printer. (I started to work on printers in 1966, so I have some experience with them). Its quality and reliability have been superb.
When I "upgraded" to win 8, I found that no driver was, so I bought a new HP AIO, but its controls were so poor and hard to see that I returned it immediately. Then I returned to Windows 7, a good solid o/s.
Now, I'm thinking 'redevelopment' of Windows 10. I had assumed that no driver for my L7680 would be available, but I read somewhere that one became available for Windows 8.1 (?)
My question is: a driver Windows 10 will be available for my excellent L7680 AIO? Or do I have to stay on Windows 7 to use it?
Windows 10 is not quite finished yet, is not clear what will be included. (Last week there were three versions of the builds on the fast ring.) The last public version includes a printer HP Officejet Pro L7600 Series driver.
Page www.hp.com/go/windows10upgrade no details, but said toward the end of July for more information on what will be officially supported in Windows 10.
original title: HP Officejet pro l7680
Guard gives me paper jam error. I removed all stuffed with material, redefinition and still not stop send MSG does anyone have any suggestions? Says the error is in the area of the print cartridge. Nothing there.
· The printer works much earlier?
· What have the changes to the computer or the printer settings until the problem occurred?
You can see the link given below to resolve the problem.
Hope that information was useful
Same question as the last message for a printer differnet model (sorry for what may seem like a question in double - I'm trying just to be sure that I don't cause me a headache later).
I have a printer HP OfficeJet Pro L7680 all-in-One (FAX, Scan, Print, Photo) I would like to get rid of him. Before disposing of it, and for reasons of security, I would like to know if there is an internal hard drive that could potentially be storing all I can have copied, scanned or faxed.
Hello sixmil5and welcome to the Forums of HP, I hope you enjoy your experience!
I see that you have concerns about the internal memory of the printers. Memory is automatically reset when the printer is disconnected, so you have no problem with personal information being recorded.
Thanks for posting on the HP Forums and please let me know if you have any other questions.
When I turn on my printer, I get the following error
Jam of transport
Open the access door to print, clear jam and then press OK to continue
I did what the message suggested, but I have not found a jam so I don't know what to do now.
I have a HP Officejet Pro L7680 all-in-one printer.
PLS, click the link below for the resolution...
Hope this will help... =)
I have a HP all-in-one Officejet Pro L7680, and every now and then it disappears from my computer Windows 7 64-bit. It is removed from the list of printers in any program use to print something, and it has also disappeared from the list of printers and Windows devices. The center of HP Solutions icon cannot access the computer and gives an error message saying that the printer is not completely installed. Printing software is always on the computer, in order to reinstall the printer, I have to go through the process of uninstalling all software before installing again from scratch. I thought I had all the printer installed updates, but there may be something I don't know. I know how to uninstall and reinstall from scratch - I will do now - but this product every two months, and I would like to avoid having to do that later.
Help or advice you can provide would be greatly appreciated.
Thank you very much.
I add this addendum to the message a day after posting the original message in order to provide additional information. Yesterday, I removed and installed from scratch print drivers. I ended up having to do this three times. Each time, I managed to install the complete printer very well, but when I installed updates (directly or in the past), the printer drivers "disappeared" in my list of printers and it was not accessible more programs I need to print things (processor or browsers). After the disappearance, I deleted programs and reinstalled. In the end, I chose to not not to install updates because that has caused the printer to disappear. I was able to print. However, today when I booted up my computer, the printer was 'gone' again. I deleted the drivers (using windows 7 uninstall a program function) and I reinstall drivers again, but given the speed at which the printer is missing, I'm not optimistic that this will work for a long time. I don't know all major changes I made to my computer recently that could possibly cause the disappearance of the printer suddenly occur so frequently. I get Windows updates each week. Hmm. Another note - after installing the drivers yesterday so I could print, I created a "restore point" on my computer. Today, when the printer was "gone", I tried to restore to the restore point, but the restore process has failed. That's why I have to reinstall the drivers again today.
Thanks for any help you can provide.
Thanks for letting me know.
Let's start with the instructions I posted, but change a few steps: please do not follow the steps in RED
- Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
- Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
- Download the software and choose Save as, save to desktop > OJProL7X00_Full_14.exe
- Download and install the Microsoft Visual C++ Runtime Error fix
- After step 3 and extracted downloads software, open the temp folder, use the instructions in step 1.
- Locate and open the folder starting with 7z (example: 7zS2356)
- Open the Util folder
- The CCC folder
- If you have a computer HP run the L3uninstall.exe. If you have a computer no HP run the L4uninstall.exe
Instead of the procedure described in the reading, please uninstall the software by following the steps in this link: uninstall the printer software Instructions
Now, you can return to pick them up to step 10 and complete all the steps of the procedure.
HP OFficejet Pro L7680 turns off and won't turn back on.
I see it's been a while since you have posted with us on the HP Forums. Please, let me take a moment to say "Welcome Back".
I see that you have a problem with the printer l ' auto turn off and not turning it back on.
You happen to have the printer power cable connected to a power strip/bar? If so, please try to connect the printers power cable directly to a wall outlet. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.
The printer in the document is a LaserJet printer but this document is intended for HP products in general and only use the LaserJet printers for example.
I'll also include a document indicating when the HP printer will not be running or to respond when the power button is pressed.
If by chance the problem is not resolved after you complete the steps described, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.
Please do not hesitate to write me again if you have any other questions.
I wish you a great Monday!
See you soon,.
My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine. I tried aligning the printheads and clean the print heads, but still does not work. Help!
Thank you. It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head? I will contact HP support. Thanks again for your help.
My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me. All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.
Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.
There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:
1. go to your devices and printers
2. right-click on your JO L7680
3. navigate to printing properties
4. click on the Advanced tab
5. click on the Separator Page
It was empty or was there something put there? If something is listed here please delete and apply the changes.
If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.
The PSDR find something, let me know the results?
If you still print the extra, please check the size of the paper, that is - this currently fixed at?
Please let me the following information if you still get the blank page before prints:
2. What is the connected printer, USB or wireless?
3. If you print from the internet or e-mail you get the blank page or documents?
My HP Officejet Pro L7680 all-in-one was printing and then abruptly stopped. In the print queue window, it says 'printer ready '. Under the heading "job info", it says "ERROR: / private/etc/cups/interfaces/HP_Officejet_Pro_L7600 failed."
That's all. No additional inequality at all. I searched online for anyone with a similar problem and could not find anything related.
Also, as a side note, when the printer was working before, in my Mac toolbar icon was a picture of the black printer. Now when I hit print on a paper, original icon pop up and then converted to an image of a gray printer that does not resemble the printer. Don't know why, but it seems apparent.
To begin I suggest to remove the software and then reinsert from the link below, these are the drivers up to date and I hope this will solve your problem.
My original computer has winXP when I bought the printer.
I used the installation disk to install the printer.
Worked very well.
My computer died and I got a new one that has Windows 8.
I can't install the printer with the Windows XP installation disc
Can someone help me to install this printer on my new computer windows 8.
I'm not really sure what to do
Welcome to the Forums of HP Support!
Regarding your request to install the L7680 on Windows 8, I have the solution. Given that the CD is not compatible Windows 8 you can install with this download: HP Officejet Pro Full Feature software and driver.
This will be just the installer similar from the CD, only specific to WIndows 8.
I hope this helps
Went from Vista to Win 7. Can not get the printer software to completely load on the HP download site. I get the message "sorry, your download was cancelled. Help? Thank you.
OK after researching this problem, try the steps below...
1. by using Microsoft Internet Explorer click this link
2. Select your appropriate operating system, and then click "next".
3. under 'Software Installation product - driver', select "HP Officejet Pro Full Feature software and driver.
4. when the loading of the next page, click on the Download"" button.
5. If the procedure below do not solve your problem try the same steps for another web browser (ie, Mozilla Firefox or Google Chrome)
I hope this helps!
I use this system as a scanner only. It is not connected to a computer. Is it possible to print grayscale only from the printer console? Thank you.
Cunfusion, confusion. Scanner will not print. What you trying to do? Do you want to copy (similar to the copiers)?
Under the terms of the copy function, you have 2 options: color and black. Please select black.
It does not work!
I watched the videos and documents, and the printer appears in the menu of add printer, no matter how long wait.
I CAN manually add it via the IP address, but it only tri-des works; I can only print B & W and no other feature (fax, scan). I can update the drivers, but the drivers updated... weird, because if I then remove the printer and try and add it again, he will see it as ONLY a fax.
Router is D - LINK DIR-655, if it's important.
Summary: can add printer via IP, but it his lack of features, cannot add printer via the normal method.
Add a printer by IP Yes, never give all the features, usually only basic printing.
Make sure that your router has the latest firmware and it is freshly restarted by pulling the power plug.
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Reset the printing system:
-Go to System Preferences > print & Scan
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.
Maybe you are looking for
My Google Play Music app is stuck on "waiting" and nothing I've tried invites you to start to download again. I have also had no luck in removing the application. It is on an iPad 2 air with the latest version of iOS 9. I have tried all troubleshooti
Hello I just set up a new player to Tv and BDX4350 40TL968B. I decided to invest in two or three pairs of glasses of the FPT-AG02G. When you try to view a 3D disc I'm having a problem where the shutter affect on continue glass cutting. What is happen
Fire Fox continues to ask permission to update my system
My Tosh c50 with Qualcomm Atheros AR956x adapter keeps dropping its connection with the blank superhub. The most recent drivers have been installed through Microsoft update, after the win8.1 upgrade.Queries of blank media if the pilots were from Athe
On my Pavilion Dv7 7010: I use a dual boot system. A 500 MB sata disk 0 and a processor intel 320 128 GB SSD on disc 1. I installed the dual boot with Windows 7 original on disk 0 and the new installation of Windows 8 on DIST 1. I've upgraded to Flas