OJ Pro 8000 A809n - printer lights up with LEDs indicating paper jam

Similar Questions

• Officejet Pro 8000 A809n Web server password

  I'm trying to change the settings for my HP Officejet Pro 8000 A809n network and the Web server responds with a prompt that displays "the 192.168.1.250:80 of server requires a user name and password.  The server said: printer HP Networking @. "He then a box of user name and password.  I tried admin, Admin, administrator and all the combos for username and password including drafts, but without success.  I followed the instructions to reset the printer several times and had to connect to the USB to re-setup wireless network, but whenever I connect to the web server, it wants a username and password that I've not been given a chance to put?

  I tried 3 different computers, 2 different routers to see if that helped but no luck.

  Computer details:

  HP laptop Pavilion dv6 Windows 7 Home Premium 64-bit

  Dell Windows Vista Business 32-bit Edition desktop reference

  Dell Latitude Laptop Windows Vista Home Premium 32-bit

  Routers:

  Firmware for D - link DI-524 revision D 4.03

  Linksys WRT150N

  Any ideas?

  Thank you!

  David

  Decided to try a more reset using the following instructions:
  1. hold down the power button / stop
  2. press the wireless button twice
  3. press on button cancel three times
  4. release the power button / stop.

  Attached to an ethernet cable and waited for router assign the address. Used the web server configuration wireless SUCCESS!

• OfficeJet pro 8000 A809n is listed as supporting Eprint, but implementation is not possible

  My printer (HP officejet pro 8000 A809n) is listed as supporting Eprint, but implementation is not possible. Can someone help me with this, or if my printer isn't compatible Eprint?

  I gues my printer HP Officejet Pro 8000 A809 does not support the ePrint. The HP Officejet Pro 8000 A811 does support ePrint.

• HP Officejet Pro 8000 Wireless printer: Always be streak on copies vertical white

  HP Officejet Pro 8000 Wireless printer: Still get a vertical white streak down the photos. I changed the yellow/black printhead. Only one aid note said I should try to clean the scanner glass. Where is the scanner glass, and how to do for her?

  Other options to get rid of the vertical line?  Thank you.

  Hello

  It sounds like a problem with the printer itself, because it is indeed a vertical GIS. A cartridge problem would cause a horizontal issue. You can tru is the cleaning of transport, stem from the metal bar that you see in the printer, and carefully clean the Strip transparant. This with a lot of attention that its rather delicate and if it breaks the device is ready for the trash.

• HP Officejet Pro 8000 Wireless: Download for Officejet Pro 8000 Wireless printer driver

  I've been looking for a printer driver download for my HP Officejet Pro 8000 Wireless printer, but unable to find one and the web page keeps just leading me in circles.  I'm under IE 9.0 and Windows 7 Professional.  Could you give a link to download the driver?

  See this:

  http://support.HP.com/us-en/document/c02266980

  or

  http://support.HP.com/us-en/document/c02693964

• HP cp1518ni: print a page then error message - paper jam

  Hello

  Hoping someone can help please:

  I tried to print a 10 page document and my HP Laserjet Cp1518Ni prints one page at a time, each time with a message "paper jam tray 2, clear Jam then press OK". I have remove the tray and there is sometimes a piece of paper that has begun to pick up and sometimes not at all jammed paper. Once the tray is replaced then initializes it before printing a page more.

  Is there something I can do to remedy to this please?

  Thank you, Shaz.

  Problem on this model.  The drive tray 2 roller is probably worn out and must be replaced. Just do a search on google for the maintenance manual as instructions are in the manual. Rollers can be purchased online:

  http://www.feedroller.com/store/index.php?cPath=1_17_87_2547_3280

• HP Officejet Pro 8000 Wireless print Virgin then think it's out of paper on every print job

  Each print my printer spits out a blank sheet of paper, tries and fails to retrieve the next piece and then the release of the paper warning light lights up on the printer. I push the button and then it prints very well. Seen this boredom for a while and I can't seem to solve. Thank you! Windows 8. The printer did not do that during the initial installation.

  Hi rmalbo,

  Welcome to the HP Forums.

  I see by your post that the printer will print a page, then a blank page, then it pull the next piece of paper in until you press the button. I can help you with that.

  Looks like the paper source is set to manual because after pressing the button, it continues to print.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Print a self-test Page.

  Select the method: use the control panel to print a self-test page.

  She just print the test page or send on another white page?

  The error message didn't upward after printing the test page?

  If it is the same thing printing self-test then follow the steps in this document, roller cleaning, resetting the printer.

  The printer stop printing and the power and resume lights flash (paper jam).

  If we print the self-test material then it's software related.

  The application, go to file, print, preferences, Type of paper/quality.

  Select the paper source from the drop-down list, select Auto Select.

  Select the paper type from the drop-down list also.

  Click OK.

  Trying to print now.

  I would like to know if you have the same problem.

  Good day.
  Thank you.

• OfficeJet 6500 e709: printer carriage stuck far right - no. paper jams

  Hello community,

  Recently my carriage of the printer on my HP Officejet 6500 E709n simply ceased to pass on the right side. I turn on my printer and he came with a message of paper jam.

  I checked and traveled all Paper Jam troubleshooting steps and the steps to move the printer, nothing helps.   said videos and done all suggested steop nothing helps.

  The last thing I printed has 3 addresses on envelopes. I have placed all three envelopes in the tray at the top of a stack of paper that was already there. The first envelope print, while the second has picked up two envelopes - but printed on the top - except, I noticed the corner of the return address, although entirely in tact, had a small spot of ink. I replaced the third envelope and it printed fine.

  Please, can someone help me solve this problem?

  @JohnnyBones, welcome to the forums!

  I read your post about the question of jam of transport that you are facing with the Officejet 6500 Wireless printer. I understand that you have already tried the recommended troubleshooting guides, I posted below, does not.

  The following suggestion I have would be to ask to HP directly to see about having the printer repaired or replaced. If the issue was fixable, the troubleshooting steps should have helped!

  1. One "original jam: clear jam and press OK"message for HP Officejet and Photosmart all-in-One Series Printer.
  2. "A 'carriage jam' or ' 0X610000F6" message for HP Officejet 6500 (E709a) and 6500 wireless (E709n and E709q) all-in-One printers

  Join our technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you like my answer to your concern today, click on the thumb to the top below!

  Best wishes!

• Print duplex on HP 4630 causes paper jams

  Whenever I try to print double-sided, my 4630 print the first side very well, then returns the document, but before he can print the second side of the tip of the paper seems to catch something.  The book comes out with a notch at the front, or simply crumples upward and blocking the printer.  Printing works fine.

  I followed the suggestions online to remove the small pieces of paper from the printer.  They help with this problem.  Any suggestions?  I really want to print two-sided again.

  Hi @cmarceau

  I understand that you said that you have followed the instructions online, but can you describe what you've done so far? I suggest cleaning the rollers and maybe by aligning the printer again, but I don't know what you did and what you might not have.

  Maybe watch the following document and make sure you have completed all the steps suggested; A "Paper jam" message on the control panel.

  Please also check that you select the correct paper for the printer type know how heavy the paper should be.

  I look forward to hear from you.

• Need help with CP1215 false paper jam issues! Using Windows XP

  I have a HP Color Laserjet CP1215.  Whenever I try to send a print job to the printer, I get a paper jam message.  I go through the paper jam, clearing routine, but there is no paper stuck. HELPPPPP!

  Hi mrben,.

  Follow the steps outlined in the document below and let me know what you find?

  Out of paper"Error Message is displayed and the printer does not look upward or feeding the paper

• Printing of booklet with HP Officejet Pro 8000 A809n

  Do any one help on printing of booklet? I looked at other messages and none seem enough to cover my problem.

  I want to print from Microsoft Office Publisher 2003 and have a PC running Windows XP.

  The booklet needs to print a4 (297 x 210mm) paper landscape format as well as 2 pages (A5) by hand.

  Prints what is portrait with 4 pages per sheet (format A6) with printing on the reverse back.

  I tried all combinations of landscape and portrait etc and nothing works. As I have to do these books very often in the future I want to sort as soon as possible.

  Thanks for any help.

  Hi there tallboy,

  This microsoft article should help with getting facility brochures and printed. Let us know if it helps.

  Good luck!

• HP Officejet Pro 8000 Wireless does not Hotmail with HP print e print app

  I am able to add gmail as an email to print wireless but when I try to add my hotmail accountI get an errorHostname of audit is filled as pop3.live.com and port is 995 he refuses checked withssl. and without her it just loops and loops on and checking account. Why used hotmail working?

  Thank you! I have to set the wireless device. Right? Also defined as hotmail acct?
  Thank you

• OfficeJet Pro 6978: cannot print graphics color with OfficeJet Pro 6978

  I just bought an OfficeJet Pro 6978 and tried to print a document that has a blue logo in it. The logo is a drawing created in Photoshop blue and appears blue in my Word document. In the document, there's also a guy in blue and guy in black.

  Blue guy and the kind of fine print black - but the logo, which is supposed to print prints blue, black. I tried to change the color of the ink in the printer properties, but the only option I have is to enable or disable the gray levels. It is set to off.

  All Word settings are set for this logo to be blue.

  Help! I use this printer in my company and that the document seems really stupid with the logo in black.

  Thank you!

  I thought about it: I had been using a .tiff chart. Changing to a .png and modifying the color in Word seem to do.

• HP Officejet Pro 8000 Wireless - print out this partial test page after each print job

  I get this page a partial alignment (?) after each print job.  I reinstalled the software, aligned and cleaned print heads, contacts cleaned print head, but still get this page.  Pretty frustrating.

  This image, I see that the printer does not align correctly.  If the unit is out of alignment, then the sensors in the printer detects it.  That's why the printer is constantly trying to perform the alignment.

  There is a document with the steps to solve this problem.  The document helps walk one by checking the cartridges and the parameters to determine if the problem is software or hardware.  Click here to access the troubleshooting document.

  I hope this helps.

• Office Pro 8000: Cannot Print/Out of ink error even after installing new cartridge.

  When I tried to use my printer a few days ago, I received an error message "can't Print Can: ink" on the magenta cartridge.  I had used the printer a few days before and had not received a low ink warning.  It seemed suspicious to me that I would have received an empty cartridge error message without having previously received a low cartridge warning.  The cartridges yellow and cyan read 70% complete - all 3 were original cartridges.

  I bought a new cartridge 940XL magenta and installed according to the instructions.  Now, I get a message that the new 940XL cartridge is empty.  I can shake the old cartridge 940 and hear liquid inside.  Obviously, the new cartridge is also complete.  I tried to electric bike, reinstall the software, etc., without change of status.  If I swap back between the 940 old and new cartridge 940XL, they are correctly identified by type on my screen as the 940 or 940XL.  Because of the way the problem is presented, I don't think it is a cartridge problem.

  Of course, problem first awaken on May 8, and my warranty expired on 26 April.  Any suggestions?

  I solved my problem, what was obviously a lack of factory Assembly.  I looked inside my printer with a flashlight in the area where the ink cartridges are installed and found sprayed inside the printer magenta ink.  I disassembled the printer and found that the magenta line had been damaged during installation.  There are four tubes of ink that out by behind the ink cartridges, can do a U turn back toward the front of the printer.  Just after the bend, they do an another elbow top neighborhoods.  It is at this point that I found the damaged magenta line, directly above a screw on the right side of the housing of the ink cartridge.  The lines are in a very narrow passage and are held in place by several guards, moulded plastic.  It seems that the lines have been in place in the guardians, then the screws inserted from the top.  As I said, there is a tight passage, and it would be very easy to damage the line of ink right here if the lines have not been carefully selected to insert the screws when mounting.

  To solve the problem, I removed about 1/4 inch line damaged magenta ink.  I cut the line with a sharp razor, carefully to avoid collapsing the line or causing burrs to the hose.  I then placed approximately 3/4 "heat self-sealing tube on one end of the line of ink heat shrink.  Then I connected to the line with a small piece of plastic tube rigid of the handle with a swab of cotton, which was a perfect fit and comfortable on the line of ink.  Making sure not to cut the tube of ink or cause other damage, gently twisted the line of ink back until the ends have butted up inside the splice of cotton swab.  I then positioned the shrink tube over splice and it shrunk with a hair dryer.  Heat shrink tube, I used a hot melt glue applied to the Interior, which has helped more away making a watertight splice.  Again, it is not a lot of space, so the splice should remain small.

  I reassembled the printer, reinstalled ink cartridges and powered by the printer.  After the normal, long time running, I printed full color sheets and everything was fine.  Already that I had installed the cartridge magenta watch now that it is complete, and the remaining cartridges also read the levels they had before disassembly.