Omni 10 connection to PC via USB

Similar Questions

• omni to connect to pc via usb

  My omni will do not do anything with the usb connected to the pc in fact the pc recognizes even she or she see the external hard drive. Omni th has the same problem with the pc. Is that normal or what? I have no problem with my android device. I just photos of transfer at the omni for the wife see that she bought for her. Bravo, Laurie

  Your Omni is a 10 PC - all the appropriate options for sharing files and settings between PCs will apply to your Omni 10. Because your Tablet and PC are the "host" devices - only one can be responsible, is why they will not 'see' each other when directly linked together. The devices iOS (and Android) are more flexible and can function as host or client when connected to other devices...

  If you choose to use USB instead of sharing files on your network, you need to move your files back & suite via an intermediate device - USB stick, card SD or portable hard drive. Because your Omni 10 tablet can provide only a small amount of power to connected USB devices, "external hard drive" likely need to be connected to your Omni thru a powered USB - hub which can provide the necessary power to operate your drive when it is connected to your 10 Omni.

• Error: "no connection is available via USB" when you try to synchronize Palm Tungste E.

  original title: problems with my Palm Tungste E and Windows XP

  I have a Palm Tungsten E PDA. I can't synchronize Ho. The Palm shows that no connections are available via the USB port. Palm software only has a connection available in the Installer (Com 1) series. How can I cofigure system to allow me to Hotsync? Thank you very much.

  Hello

  Follow the steps in the following link and check if that helps.

  http://KB.hpwebos.com/wps/portal/KB/common/article/2630_en.html

  Also check the following link for more information.

  http://KB.hpwebos.com/wps/portal/KB/common/article/8594_en.HTML#4

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• Not able to connect Sony HandyCam via USB

  I have a Sony HandyCam DCR-DVD905E, which was acquired a few years back.  I've never had a problem plug it into my laptop Vista 32 via a USB cable.  However, recently, my computer stopped recognizing the camcorder and tell me that the driver installation failed and I have to contact the manufacturer of the device.  But according to Sony, the driver of this model USB device should be included in the operating system, which I believe because it allows to work perfectly.  In any case, can someone help me find the device driver so that I can reinstall it.  Thank you.

  Hi Cyyl,

  You should be able to download the driver from the Web site below. Try and let me know.
  http://www.Sony-Asia.com/support/product/DCR-dvd905e/modelfirst

  I hope this helps.

  Bindu S - Microsoft Support

• HP LaserJet M401dn via USB

  Environment: Horizon view 5.2 with WIN7 linked clones and persistent disk.

  I have a HP LaserJet P1606dn printer. When you connect the printer via the usb port (this is how it should be implemented), the printer attempts to load, but installs as an optical device. The drivers are on the link clone. What I did next is to connect the printer to the network and to enter an IP address. I then went in the printer settings via a browser. The printer is a parameter called "automatic detection". I have disabled auto connect. Then I unplugged the printer and connected via USB. Now the printer is displayed correctly on a clone of link and works all the time.

  Now for the M401dn I added the drivers to the virtual machine. When I connect the printer via USB, it prompts you to install the drivers. You can go through this installer and it will install the printer on the link clone, but when you restart the machine the clone of link does not keep the installer. That's how a clone of link is supposed to work. I tried connecting via an IP network and see if there is an auto connect as the P1606dn, but I don't see one. So, how can I get this printer to be installed on a clone of link via USB?

  Thanks in advance for your help.

  I found the answer. For all those that are insterested the HP LaserJet M401dn printer has a display screen. Turn on/off service, HP Smart Install. Disable Smart Install.

• Import the camera directly into Lightroom via USB

  I looked around this forum but could not find an answer to what I thought was a simple question.

  Using the Mavericks 10.9.5 and Lightroom 5.6

  I am trying to improve my workflow.

  I currently take two steps to get my photos in Lightroom:

  
  

  1. connect the camera via USB for Mac and Nikon Transfer allows you to import photos from my camera in a default folder on my Mac, I also put it to remove photos from my camera once completed.

  2. open Lightroom and import photos to the catalog, including moving them to the desired specific final destination folder.

  I know I could use a card reader but don't want to go down that road because it's a pain out the mem card and its replacement.

  Is it possible to reduce this to a single step using Lightroom.

  I tried implementing of Image Capture on my Mac to make Lightroom automatically open when a camera is connected, but the option is grayed out, which seems strange.

  If I have lightroom open, and then select the camera as source only get the option copy files not move them to a folder of destination of the machine photo so can't erase the memory of the device.

  I can't be the only person who wants to do this someone has a solution.

  After playing around a bit I have answered my own question.

  I discovered that Nikon Transfer has an option to automatically open another application, so affecting that Lightroom, I realized what I wanted.

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• The airport will connect to the brother 2270DW via USB but not ethernet

  Apple replaced my Airport Extreme after only 9 months and it has been quite a challenge to get back to square one.

  On the older airport, I connected to my printer wireless Brother via an Ethernet port on the router, but now it does not detect the printer. I changed the cables without result. I have finally connected via USB to the airport and wireless printing is restored, but why didn't he see my ethernet port.  The port works because I am connected via a cable to my laptop and it lights up. I have a problem with the port or printer?

  He does not see my printer via ethernet. What gives?

  Thank you

  Alexander

  You have entered the system preferences in printers and Scanners and added to the printer?

• OfficeJet 6500 E710n-z: where to locate X 86 Drivers for Win 7 to print Via USB system connected to the network using Win 8.1

  Since my computer can only connect to a printer wireless via USB, other computers on the network cannot connect to the printer.  The possibility of allowing other printers using the main system of sharing, I need the x 86 driver but cannot locate it on the HP support.

  Seems there are a lot of problems installing with HP systems, I would hope that society can give a high priority to these issues.  Many of us love quality HP but wireless connectivity is frustrating.

  In a humorous way, please remove the "cannot find the printer - make sure that the printer is plugged in and turned on."  statement.  Our children know how to set up a network, so that the statement is hilarious, until you see for the 20th time as possible motive to the wireless printer is not found on the network.

  Hello
  My post seemed to have grown to a case manager who was willing to put up a time for the members of technical support to contact me.  By the way, she asked about the distance, the printer from the router, which, by other reviewers, should be placed next to the printer, and she asked for me to try to move the router to about 18 inches from the printer so that it would be responsible for coordinating the call of support following our conversation.

  I did it and all network issues related to wireless access by the entire Office has been resolved and performing network and each station can print and scan in a few minutes, following a job application.  Printing took about 20 minutes to start and sweep was impossible until this Council been offered.

  Many congratulations to Yvonne!  And, I thank you for following up on this post.  I am a very satisfied customer again once my application has been met with personal concern for the issue and an appropriate resolution and FANTASTIC found!

  Thank you once again,

  Rick

• Is it possible to share a hp color laserjet cp2020 connected via usb to a 32-bit with a 64-bit PC?

  I have a client that is running a PC XP 32 - bit that has the Color Laserjet CP2020 connected via USB. It is shared on the network to the other PC, but I've recently upgraded to 2 PC for Windows 7 64 bit and now I can't connect the printer shared for them.

  Try the following: install the drivers for Windows 7 x 64 on your Windows 7 machine as if the printer will be attached locally.  Then on the Win 7 machine go devices and printers folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, then select the cp2020.

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• To connect to the PC - tab 8W - not seen when connected via USB - Help!

  My new 8W tab is not seen by the PC connected via USB. Both are Windows 10. Help!

  Out of curiosity I will pick up an OTG cable and let you know the result!