OMSA

Similar Questions

• Can't access to Dell OMSA-how fix?

  Installed Firefox 42 on server. Allows access to Dell OMSA with IE. Firefox does not open the link. Internet research said I must go in OME preferences and check the box to allow this feature. Where is the 42 version?
  Thank you.

  Thanks for your help.
  I found an article on the web who told me to change two settings security. Now it's working. I still have to log in with the user name and password, but it's an https connection. Everything I do is close the browser to exit.

• Problem with OpenManage integration for vCenter - OMSA status: update required

  Hello

  We have a problem with the configuration of OpenManage integration on a vSphere 5.5 U2 Cluster. We have deployed IMO for vCenter v 2.3.0 build 290 aircraft, and we have installed manually OMSA VIB v7.4.0.2 on our 5.5. U2 ESXi hosts.

  The question we face is respect for vSphere host - when we start the Wizard "Fix Non compliant vSphere Host" it displays the correct version of the OMSA - 7.4.0.2 but OMSA status is "required update".

  Whe test us the connection to hosts using "Test the connection profile", it hangs at 0% and will be never finished.

  Also in the OpenManage integration in vSphere Client "Frimware" tab option is grayed out.

  Please indicate how we can make this work?

  Concerning

  Milan

  Well, I did some research more and found that ESXI 5.5 U1 and U2 don't are not supported by OMSA right now.

  FTP://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_virt_solutions/Dell-Mgmt-plugin-for-VMware-Center-2.3_Release%20Notes_en-us.PDF

  ESXi 5.5 U1 and U2 are supported only for the OMIVV on the servers of 12th and 13th generation who are capable of out-of-band management and require no OMSA must be installed on the host system. We intend to add a supported of the OMSA version at a later date.

  Thank you

• Reference Dell OMSA - does not work after the installation of KB3161608

  I recently installed the last batch (June 2016) the MS updates on our servers.  It went well with the exception of two servers, both running Server 2008R2 and a PE2970, a PE2950.  These are our only two servers running server 2008R2.  On both machines, after installing all the updates, I was unable to open OMSA.  The browser will display "Internet Explorer cannot display the webpage".  OMSA continued to work properly on the rest of our servers, which are almost server 2008.

  I tried another browser, but that has not worked.  OMSA reached 7.3, so I downloaded and installed 7.4.0 and the 7.4.0.2 updated.  I found references to similar online, and some of the install OMSA fixes problems using the prompt, or "runas admin".  I installed them all over the place, but no matter how I installed it, I got the same result!

  I've not found errors in the event logs of the server.

  So I started uninstalling updates until I found the one who broke it, and it was KB3161608.  Uninstall this update fixed OMSA on both servers.

  This updates is listed as optional, so I'm not sweating it for now.  I believe that this is a certificate problem and could be fixed by creating a new self-signed server certificate, but this isn't really my area of expertise.  But I wanted to put this out there in case it might help someone else.

  In my tests, you should communicate the updates installed then OMSA will not work.

  KO 3161608

  KO 3172605

  KO 3172614

• 8.3 OMSA @ ESXi 6.0 U2 @ R515-> cannot log into the website OMSA to ESXi HOST.--

  Hello guys.

  I've updated my ESXi of U3 5.0 to 6.0 U2 and I lost my OMSA. I can not connect from the web page.

  For the update of the host, I used this ISO file:
  . VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A00.iso

  After that, I installed OM-SrvAdmin-Dell-Web-WINX64-8.3.0-1908_A00. EXE to a VM W2012S to this host. I can open the web site to connect, but when I try to connect to my ESXi HOST, I received this message: failed to connect... connection error.

  When I saw that I began to check a few things, I ran: 'list of vib software esxcli' and I saw:
  Name Version Date seller installation acceptance level
  ----------------------------- ----------------------------------- ------ ---------------- ------------
  ...
  OpenManage 8.3.0.ESXi600-0000 Dell PartnerSupported 2016-07-29
  Reference Dell-configuration-vib 6.0 - 2A 00 Dell PartnerSupported 2016-07-29
  iSM 2.3.0.ESXi600 - 0000 Dell PartnerSupported 2016-07-29
  ...

  Another very strange for me, is that I can't see any reading of the sensors to Interface web server: HOST /... / or Vsphere Client.
  But I can read a large number of web page Idrac and ESXi SSH data using ' esxcli ipmi sdr list material.
  Node-sensor Description-reading raw reading of raw Timestamp/comment base calculated entity Instance
  ----------- --------------------------------- --------------- ---------------- ----------- ----------- ------------------- ---
  0.1 1 Temp 3.1 processor 38 degrees C 166 2016-08 - 01 T 14: 18:32
  0.2 2 Temp 3.2 processor 34 degrees C 162 2016-08 - 01 T 14: 18:32
  0.5 power 1 10.1 Temp 40 degrees C 168 2016-08 - 01 T 14: 18:32
  0.6 power 2 Temp 10.2 37 degrees C 165 2016-08 - 01 T 14: 18:32
  0.7 power Supply 2 Temp ambient 10.2 26 degrees C 154 2016-08 - 01 T 14: 18:32
  0.8 power Supply 2 Temp ambient 10.2 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.12 system Board 1 BIO Temp 7.1 44 degrees C 172 2016 - 08-01 T 14: 18:32
  0.14 front Panel Board 1 Temp ambient 12.1 16 degrees C 144 2016-08 - 01 T 14: 18:32
  0.13 system Board 1 Temp Planar 7.1 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.10 memory Module 1 Temp 8.1 24 degrees C 152 2016-08 - 01 T 14: 18:32
  0.11 memory Module 2 Temp 8.2 36 degrees C 164 2016-08 - 01 T 14: 18:32
  System of 0.48 to edge 1 FAN MOD 1A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System to 0.49 to edge 1 FAN 1 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.50 to edge 1 FAN 2 a MOD RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.51 to edge 1 FAN 2 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.52 to edge 1 FAN MOD 3A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.53 to edge 1 FAN 3 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.54 to edge 1 FAN MOD 4A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.55 to edge 1 FAN MOD 4 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.56 to edge 1 FAN MOD 5A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.57 to edge 1 FAN MOD 5 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  Power supply 0.148 1 1 current 10.1 0.6 amps 15 2016-08 - 01 T 14: 18:32
  Power 0,149 2 current 10.2 2 0.48 amps 12 2016-08 - 01 T 14: 18:32
  0.150 1 power supply 1 10.1 206 Volts 103 2016-08 - 01 T 14: 18:32
  0.151 power 2 2 10.2 206 Volts 103 2016-08 - 01 T 14: 18:32
  System of 0,152 onboard System 7.1 220 Watts 22 2016-08 - 01 T 14-1 level: 18:32

  The details of the server are:
  BIOS 2.3.0
  IDRAC 2.85 (Build 04)
  Lifecycle controller 1.7.5.4

  Any kind of help to connect to the host ESXi OMSA is welcome!

  This is the correct service.

• Run a consistency check on a managed RAID without OMSA PERC?

  What is the recommended way to run a consistency check on a PERC managed RAID without using OMSA?

  Thank you for the help Martijn G, but they tried to do it without installed OMSA. If you check that you have Linux remote access utility installed, which can be found here. Then you can use the RACADM commands. The commands that you need for this is

  Check storage racadm:

  racadm storage cancelcheck:

  Commands a lot more and those who are here.

• OMSA can not see my MD1000

  It's a house build for a media server, so it is also my first foray in 2012 (essentials) and OMSA server... so I probably did something wrong.

  I have an MD1000 with 4 drives connected to a sas 4TB sas 6/e card running a parity of storage of ReFS.

  Everything seems to work fine, but I don't see the MD1000 in point 8.1 of the OMSA.  I see the sas 6 map and its firmware / driver, etc., but the MD1000 does not appear anywhere.   I want to be able to view its levels of temp, etc. (mainly because I intend to replace the quietest power supply fans and want to know if there is a big difference in time.)

  How can I me he stand?

  Hello hifiaudio23,

  So for a MD1000, it must be fixed on a raid controller & not only one SAS 6 gb card. When we sold these systems normally, they came with a PERC (Poweredge Expandable Raid Controller) that would go into your server, and then you could see the MD1000. Is your card 6/e SAS, raid controller card or just a Non-Raid SAS 6/e card?

  Please let us know if you have any other questions.

• Reference Dell OMSA Release Date for vSphere 6.0 ViB

  Hello

  information about the release dates for vib for vSphere vsphere 6 (OMSA 7.4.1 / 8.0.1 / 8.0.2)

  Apart from that... OMSA 8 will continue in two different development branches for T630, R630, R730, R730xd and T430/R430/T530/R530/M630... or will it be a next single version for all serversystems of 13 G.

  Kind regards

  Torsten

  Toki76,

  Custom Dell ESXi ISO 6.0 came out 2 days ago. So I guess, from past experience, that the VIB is going to be released very soon behind him, but at the moment I do not see that he launched. I can research to see if I can refine the delivery date well and let you know.

  What about OMSA 8, probably a single version which includes the two branches.

• OMSA for T310

  What version of OMSA will work with a T310 running Server 2008 R2 x 64?

  Hello

  You can use OMSA 7.4. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=28KFC&FILEID=3365343263&osCode=WS8R2&ProductCode=PowerEdge-T310&LanguageCode=en&CategoryID=SM

• OMSA on CentOS/RHEL 7

  Hi all!

  I want to get the work of the OMSA on my old PowerEdge 2950 server. OMSA 7 works well with CentOS 6, it will be available on CentOS 7 too?

  Thank you.

  I know me:

  www.dell.com/.../DriversDetails

  It seems that the version 7.4.1 supports 12g (or earlier?) material and RHEL 7 dated November 21.

  Best,
  Martin

• Follow-up PE R610 running RHEL4 with OMSA

  Hello

  I was pulling my hair out to get working on a PE R610 OMSA.

  I tried several versions of the OMSA and finally managed to get the running version 6.0.1 correctly. But I'm still missing the most important bit of info, I was expecting:

  omreport storage controller
  No controller found

  This is what I get in dcsys32.xml:

  The SAS components initialization sequence failed when starting the system. SAS management and monitoring is not possible.

  The Red Hat server is 32-bit is OMSA.

  Here is a list of the installed components (I installed their origin as there is a problem with yum rest RHEL4, unfortunately I have to stay with this distribution for now):

  	Operating system
  	Name		Red Hat Enterprise Linux AS
  	Version		Release 4 (Nahant Update 8) kernel 2.6.9 - 89.0.0.0.1.ELsmp (i686)

  Systems management
  	Name		The server administrator
  	Version		6.0.1
  	Description		Systems management software
  	Contains		Data Engine 5.9.0
  			5.9.0 material Application programming interface
  			Instrumentation Service 5.9.0
  			Service Instrumentation 6.0.0 integration layer
  			Meta-package for the installation of the correct IPMI dependencies according to OS 5.0.0
  			OpenManage Inventory Collector 6.0.1
  			The OS of OMSA 6.0.0 authentication file
  			RAC5 integration layer 6.0.0
  			Order RAC 6.0.0 interface
  			Remote Access Card Data Populator RAC5, 6.0.0
  			Secure port Server 6.0.0
  			The framework 6.0.0 server administrator
  			Server Administrator install Core (subscription) 6.0.1
  			3.0.2 storage management
  			Sun Java Runtime Environment 1.6.0

  I tried to install OMSA 6.3 which is listed on the page drivers Dell as the last supported version R610 RHEL4 but when I run the Setup, I get:

  Error: Verify if Dell OpenManage media are corrupt.
  If you use the Web pack to install Dell OpenManage
  Make sure that you use the corresponding Web pack to the
  architecture and operating system on your system.

  The package I have is: OM-SrvAdmin-Dell-Web-LX-6.3.0-2075.RHEL4.x86_64_A00.15.tar.gz

  I tried another series (OM-SrvAdmin-Dell-Web-LX-6.3.0-2075_A00.7.tar.gz) and got:

  Do you want to 6.3.0 Server Administrator?
  Press ('o' for Yes |) 'Enter' to exit): y
  error: failed dependencies:
  libsmbios = 0:2.2.16 - 2.1.el4 is necessary (installed) python-smbios - 2.2.16 - 2.1.el4.i386
  error: failed dependencies:
  libsmbios = 0:2.2.19 - 5.1.el4 is needed by smbios-utils-bin - 2.2.19 - 5.1.el4.i386
  error: failed dependencies:
  SMBIOS / utils / location is required by srvadmin-omilcore - 6.3.0 - 639.1.el4.noarch

  It's the current RPM installed:

  RPM - qa | grep srvadmin

  srvadmin-deng - 6.0.1 - 800
  srvadmin-cm - 6.0.1 - 800
  srvadmin-happy - 6.0.1 - 800
  srvadmin-storage - 6.0.1 - 800
  srvadmin-omilcore - 6.0.1 - 800
  srvadmin-omacore - 6.0.1 - 800
  srvadmin-isvc - 6.0.1 - 800
  srvadmin-omhip - 6.0.1 - 800
  srvadmin-syscheck - 6.0.1 - 800
  srvadmin-jre - 6.0.1 - 800
  srvadmin-rac5-components - 6.0.1 - 800
  srvadmin-racadm5 - 6.0.1 - 800
  srvadmin-ipmi - 6.0.1 - 800.DUP
  srvadmin-racdrsc5 - 6.0.1 - 800
  srvadmin-omauth - 6.0.1 - 800.rhel4
  srvadmin-iws - 6.0.1 - 800

  Any help appreciated.

  Hello

  It looks like a corrupted installation. Have you tried completely removing the old installation?

  See the command ' $e - RPM (rpm - qa |)» grep srvadmin)"of http://linux.dell.com/repo/hardware/OMSA_6.3/

  Please let us know how it goes.

• Storage DELL OMSA [Windows Server 2003 R2 64-bit] not shown [14/10/2014]

  Hi all

  I have a general question/issue. I install DELL OMSA on a poweredge 1950 using Windows Server 2003 R2 server and the only part not appearing is not in the list system is the storage controller.

  The system carries out the following:

  Dell OpenManage Server Administrator Version 5.3.0

  It shows everything except the storage controller. Please indicate how we can improve this to show the PERC controller/storage for the following:

  WX072
  1
  Assembly, Card (Circuit), Serial Attached SCSI PERC5I, 1950, 2950
  TX846
  1

  THE ASSEMBLY, CABLE, CONTROL, SERIAL ATTACHED SCSI, POWEREDGE EXPANDABLE RAID CONTROLLER NUMBER

  Thanks again as always!

  Kent C.

  Hello Kent,

  The first thing to check is to ensure that all four OMSA services are running. They appear as DSM in services. You can also make a change to the Setup from Add/Remove programs and make sure that the storage options are installed. Alternatively, you can install a newer version of OMSA http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=28KFC&fileId=3365343263&osCode=WX64&productCode=poweredge-1950&languageCode=EN&categoryId=SM

• Ubuntu 8.10 + DELL OMSA 5.5.0 - 5 i386.deb + PowerEdge 1750 No. controllers found problem [11/08/2014]

  Hi all

  PROBLEM:

  root@Ubuntu:~# omreport storage controller
  No controller found

  * Please note that the WEBGUI shows everything EXCEPT the PERC *.

  * EVERYTHING ELSE APPEARS ON THE SERVER WHEN I JOURNAL *.

  Loading via CLI:

  restart the /etc/init.d/dataeng

  restart the /etc/init.d/dsm_om_connsvc

  the /etc/init.d/snmpd restart

  I manually installed the DELL OMSA from this LINK:

  FTP://FTP.Sara.nl/pub/Sara-OMSA/dists/Dell/Sara/binary-i386/

  dellomsa_5.5.0 - 5_i386.deb

  TECHNICAL DATA:

  root@Ubuntu:~# uname - a
  Linux ubuntu 2.6.27 - 17-server #1 SMP Thu Mar 12 04:04:33 UTC 2010 i686 GNU/Linux

  root@Ubuntu:~# cat/etc/lsb-release
  DISTRIB_ID = Ubuntu
  DISTRIB_RELEASE = 8.10
  DISTRIB_CODENAME = bold
  DISTRIB_DESCRIPTION = "Ubuntu 8.10.

  * - storage
  Description: bus RAID controller
  product: PowerEdge Expandable RAID controller 4/Di
  Seller: Dell
  physical ID: 3
  Infobus: pci@0000:04:03.0
  logical name: scsi2
  version: 02
  Width: 32 bits
  Clock: 66 MHz
  capacity: storage pm bus_master cap_list pcix msi
  configuration: driver = megaraid latency = 32 mingnt = 128 megaraid_mbox = module

  * - drive
  Description: SCSI disk
  product: LD 0 RAID5 279 G
  Seller: MegaRAID
  physical ID: 2.0.0
  Infobus: scsi@2:2.0.0
  logical name: / dev/sda
  version: 412W
  size: 273GiB (293GB)
  capacity: partitioned partitioned: back
  configuration: ansiversion = signature 2 = f362db24

  root@Ubuntu:~# lspci | grep-i raid
  04:03.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4/Di (rev 02)

  PERFORMED TROUBLESHOOTING:

  root@Ubuntu:~# omreport storage controller
  No controller found

  root@Ubuntu:~# lsmod | grep-i ipmi
  2 15112 ipmi_devintf
  1 46252 ipmi_si
  ipmi_msghandler 42712 2 ipmi_devintf, ipmi_si
  root@Ubuntu:~# lsmod-i mpt
  Use: lsmod
  root@Ubuntu:~# lsmod | grep-i mpt
  mptctl 35972 0
  86756 1 mptctl mptbase
  155468 6 mptctl scsi_mod, sd_mod, sr_mod, sg, megaraid_mbox, libata
  root@Ubuntu:~# modprobe mptctl
  root@Ubuntu:~# echo $?
  0
  root@Ubuntu:~# modprobe mptbase
  root@Ubuntu:~# modprobe scsi_mod

  root@Ubuntu:~# dmesg | grep-i mpt
  [12313.810414] base of MPT fusion driver 3.04.07
  [12313.816546] device (ioctl) misc 3.04.07 MPT fusion driver
  mptctl [12313.816741]: registered with the base Fusion MPT driver
  mptctl [12313.816748]: / dev/mptctl @ (major, minor = 10, 220)

  QUESTION:

  
  Does anyone know how to set up the remaining part of the DELL OMSA so PERC appears in the GU or OMREPORT?

  Also, I want to update the FIRMWARE, it'll be ok [I can load Windows XP Mini to run this task]

  FW UPDATE: http://alturl.com/nnob8

  Thank you

  -Hiphoptech

  Are just want to monitor the Raid or you try to do something else? You can try software raid lsi and see if it works. http://www.LSI.com/support/pages/download-results.aspx?component=storage+component&productfamily=legacy+RAID+controllers&ProductCode=P00278&assettype=0&ProductName=MegaRAID+SCSI+320-4x+ (531)

  Or this http://sourceforge.net/projects/megactl tool

  With it is not a validated OS, it is not possible so that it can work properly.

• Dell OMSA GUI reference works don't not with 6.4 CentOS 64 bit

  Hello

  I am trying to install the DELL OMSA on my Dell Poweredge 1950 with no luck setting the GUI part on the server, so I can use the link "https://localhost:1311" in all of our business network.

  The problem is that I've done the following to at least be able to use the CLI portion only:

  http://www.md3v.com/install-Dell-OpenManage-on-CentOS-6-4

  It is a very useful script that I found online to allow at least the installation works fine. I can't access the web interface, it continues to tell me Elinks or any external browser "unable to access".

  I also have openssl installed with wget and perl. I don't know what keeps me to get the portion of browser to work. Please help!

  Here are the currently used version of CentOS kernel:

  CentOS 2.6.32 - 358.el6.x86_64

  Thank you.

  Hello

  What version of OMSA are you using? Sometimes the older versions work better on the older hardware. What does
  

  srvadmin-services.sh status
  

  show? You may also want to try adding a non-root user to /opt/dell/srvadmin/etc/omarolemap
  

• CentOS 6.4 DELL OMSA error - PE 1950

  Hi all

  I managed to install the DELL OMSA on CentOS 6.4 [64 bit] on a Poweredge 1950 server without too much problem.

  PROBLEM:

  After installation, I have the following problem/error watch and need help where in the file 'invc ol' the following shall be published or how to solve the following...

  / opt/Dell/srvadmin/sbin/invcol:. / invcol: /lib/ld-linux.so.2: bad ELF interpreter: no such file or directory

  Your comments would be appreciated!

  Thank you

  -Hiphoptech

  Hi Hiphoptech,
  Try to install the binary 32 bits of libstdc ++ and zlib
  yum install compat-libstdc ++-33 - 3.2.3 - 69.el6.i686 zlib.i686

• Reference DELL OMSA 6.5 on Windows server 2012 - instalattion - cdegfc.exe error code = 259 error

  Hello, masters!

  I try to install Dell OMSA 6.5 on Windows Server 2012 x 64 and get the following installation error message: code of error cdegfc.exe = 259
  See figure available at: https://www.dropbox.com/s/ns2x73zjtkz5wig/Error_OMSA-65.PNG
  After the error message, the installation is aborted.
  I use the aministrador account to install.

  Can you help me?

  Thank you

  Diramos

  diramos

  So, I ask your help to solve my problem.

  I provided you with the cause of the error and possible resolutions in my first post. I'm not going to spend a lot of time trying to reproduce a problem and find a solution for something that is not compatible.

  diramos

  I ask you to read my previous post.

  I recommend to read my first post and look at possible causes, that I pointed out. If they do not resolve that problem, then post back with more information.

  I try to help as much as I can with material not picked up and software configurations, but since they almost always require reproducing the middle right to solve is not something that I help out carefully.

  Not supported hardware and software configurations are something that you need to fix yourself or with the help of the community. I'll give you the sense when I can.

  Thank you