On numbered lists, policy number showing too big

Similar Questions

• Wallpaper - images show too big to set as background

  original title: substantive issue of screen

  Hello

  I had my computer for more than 3 years and no problems until recently.  I wanted to change the image for my wallpaper and it is too big; in fact, any image I choose it turns out to be too big for my office.  I have not had this problem before.  I resized the image and now it does not show the full picture on the desktop.  It displays the resized photo but it seems that there is a peak of 4 x 6 on the screen, the background is black.  Any suggestions on how I can fix this?

  Janice Smith Neve

  Hello

  I had my computer for more than 3 years and no problems until recently.  I wanted to change the image for my wallpaper and it is too big; in fact, any image I choose it turns out to be too big for my office.  I have not had this problem before.  I resized the image and now it does not show the full picture on the desktop.  It displays the resized photo but it seems that there is a peak of 4 x 6 on the screen, the background is black.  Any suggestions on how I can fix this?

  Janice Smith Neve

  Use your image over-sized as backdrop, then...

  Right-click on an open sp [ace of desktop > Personalize > wallpaper ultimately > downstairs, under the Position of the image, click on the pointer, and then select FILL > click on save changes when finished.]

• Sync error: download of files didn't: "customer number: ask the too big body."

  1328917629619 Sync.Engine.AdblockPlus DEBUG Uploading reports omitted: "customer number: ask too big body."
  In the case of 2 computer Win 7 and Win XP 1 computer sync'd. Without the block, add more being sync had everything works.

  Hello!

  This is a problem with the sync engine add Block more. It seems they have questions on their servers.

  Try asking the same question in their forum: https://adblockplus.org/forum/

  Good luck!

• Preference, too big windows Assistant

  Hello!

  I have tried many step to solve the biggest problem when using my CC of Dreamweaver. No matter what control panel such as preferences, table Wizard, and any other assistant showed too big. I see not part of windows when it is open. Here is the screenshot:

  
  Preferences Windows

  

  Insertion of a table assistant

  Please help achieve the best solution you have.
  Thank you...

  Unfortunately, support-res has not been addressed in DW still

  We asked for it.  You can vote on the link below.

  Hiring views

  Nancy O.

• List - numbered policy number

  When the list using E10 editor numbered creation, email I notice that the police #1 seems to be different that the other numbers in the list. See example here:

  

  Does anyone else have this problem? Is there a fix anyone know o

  Krista Hi, I just added a numbered list to an e-mail, and the police was normal.  Perhaps, this issue has been resolved... I just wanted you to know in case you wanted to give him another chance.  Fingers crossed!

• I have too many numbers in my serial number for Lightroom. I have a card with a number on it, and he bought a new number. This number is too long.

  I have too many numbers in my serial number for Lightroom. I have a card with a number on it, and he bought a new number. This number is too long.

  !

  Frank, please try the below mentioned link.

  • https://helpx.Adobe.com/x-productkb/global/redemption-code-help.html
  • https://helpx.Adobe.com/x-productkb/global/find-serial-number-student-teacher.html
  • https://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  Hope it would help.

  Atul_Saini

• The screen visuals are too big

  After stopping for the night, a ' install updates and shut down ' was launched. The next day, newspaper on desktop, to all the screens of the site web, etc., Visual of the screen are too big. How can I get this back to fix the little plus size.

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the performance and security of your system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can also go to the website of the manufacturer of the graphics card or your computer > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: is video / graphics / Chipset (according to the label) > download and install the drivers.

  See you soon.

• My background is too big all of a sudden

  All of a sudden my wallpaper is ALL too great.  Even when I click on options "How should the picture be positioned? ... they are ALL still too big.  The rest of my computer is normal.  Please help, because it's really boring.

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Help my screen is too big, everything is too big and tense how remedy?

  Please help me I did something and now it's too big and stretched out icons and all are too big. How should I do?

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• After the last update, everything has much too big for the screen

  After the update everything was too big for the screen. I can't have enough on the screen to play a game even. I revert to a previous version and it was ok, but once again when the update went thru it's still too big. I tried to check and he said: I'm always on the 96 dpi.

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Too long and too big display settings, can not reset!

  I tried to do the CIO more then my husband could better see the screen, but now everything is elongated and too big! When I go to display settings, I can't reset because the 'Apply' button is off the screen and I can't click on it! Help!

  Press the ENTER key to apply the value.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Everything on the screen is too big

  having a problem with the size of the screen can see everything on the screen, it is too big

  do not know how to set the size of the screen everything is too big

  If you speak together, this can sometimes be corrected by adjusting the display settings.  Go to start / Control Panel / customization / display settings / advanced settings / list all Modes and select a different option.  Those with a higher number usually result in images on-screen snakker (and text smallerr).  Test to see if it helps with your problem.  Once you find that you like, click OK and then again in the program.  Windows will now use this new display with all screens and programs setting.

  You can also view the post of dwanachitchat in http://social.answers.microsoft.com/Forums/en-US/vistaappearance/thread/73caab07-bfb5-4640-b039-d78797b9c2d4.  It's the opposite problem, but you just need to do things the other way to make smaller things.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Does not display do not properly on the page linked to numbered list

  I have a page where I placed numbered elements (instructions 1, 2)  Notice..., etc.). When I preview the page in RoboHelp 2015 the numbered list with numbers and everything seems good. When I view the output from RoboHelp file, the page with the numbered elements seems well. I inserted a hyperlink to this page (page A), another page (page B). When I click on the link to the page from page B, do not all numbers in the list on the page.

  The numbered list was created using several levels number list icon. All lists use a style.

  This problem does not appear on all pages that has been done with the help of the same structure and formatting. Any suggestions on how I might solve the problem number on the linked page?

  Margaret Johnson

  Post edited by: Rick Stone - deleted email address

  Hello

  Hmmm, it seems to suggest that when the linked page is presented, he somehow lost the link to the CSS of the page.

  It is when linking from another page, what happens if connect you the TOC? Same behavior?

  I remember in the weird behavior see happening with this stuff in my own projects. And in my case, I think I had too many nested folders. This should not be necessary, but it is solved for me was to copy the CSS in the same folder and ensure there is no character of "shortcut" leading to the CSS. (.. /) is the abbreviation.

  See you soon... Rick

• Balls in numbered lists are incorrect

  Hello
  
  We recently upgraded to RH5 to RH7 and have noticed that many of our subjects have problems when it comes to use bullets in numbered lists. Our project Robo is a number if years and well over 2 k files it contains. We find this problem in the old and new subjects.
  
  We use a style sheet to our numbers and our two levels of bullets, but the bullets are not graphics. Level 1 balls are filled circles and level 2 balls are solid squares. When we consider our subjects in the WYSIWYG, everything seems fine. When you find the topic by using the "Show selected item" button or after compilation, we find that some, but not all, our subjects have this problem.
  
  A bulleted list is used after the text, everything is going very well. Its only when the bullets are used in a list numbered (for our procedures) that happens. What we see is that our bullets changed numbers. For example, we have step 1 (1), step 2 (2) and the three balls that appear in the form (3, 4, 5) even if they should be full circles, and then our step 3 appears as it should (3).
  
  Again, this happens to old and new topics, but not all of the subjects. In order to "solve" the problem, it must remove the text style to chips and use the button 'Create a bulleted list' Robo and adjust the alignment and spacing of the paragraphs to match what has our stylesheet.
  
  Any help would be appreciated. The code of a theme that is displayed incorrectly is attached. If you want a sample of a topic that is displayed properly, please let me know.
  
  Thank you!
  Melissa

  After a few tries to change the stylesheet, here is what ended up working:

  I made a new project so I could edit the CSS without drastic results. I removed all the generated code kadov and saved the .css file. Then I entered Robo and used the built in editor CSS to remove the Bullets1, the Bullets2 and numbers styles and then added back in.

  Not only does my test subjects not display correctly, he put the right code in the .css file (for my lists, styles were entered as LI and not P). The original stylesheet Robo 5 had no entires for UL or OL. Using the editor in Robo to remove and add items from my list to put it in the sheet.

  Everything is superb.

  Thank you both, Leon and Peter.

• Default zoom is too big

  I just upgraded to Firefox on Ubuntu 14.04/64 bit 38. Before the upgrade, all Web pages that are displayed perfectly normally. Now, v 38, the default zoom is very large. I have to ctl-less every webpage I visit for the zoom down to a normal size...
  In fact, the entire user interface of 38 is too big... icons on the bookmarks bar are much larger than they were on 37.0.2... What has changed between 37.0.2 and 38?

  Dave

  In addition to the update: reclassification I tried 37,02-38 on a tech Windows 10 show an overview of the system and do not get screwed up default zoom...

  Another Ubuntu user posted on this last hour: Firefox graphical furred ridiculously after update (unsolved).