On Satellite L750/0 wireless connectivity issues s 5

I own a laptop L750/0 s 5.

I seem to have a problem with my wireless connection, where anywhere not at 10 m from the router the connection cuts in and out with the yellow sign 'limited connectivity' always appears. disconnect and reconnect solves the problem for a few minutes. Ive resorted to the close session of the router.

the computer is 2 months old, the Wlan driver is up-to-date. power options have been configured to be on maximum performance for Wlan etc etc.

The main thing that annoys me, it's all the others (much older laptops) in our House very much work where mine doesn't. I actually lost performance from where I can get my old toshiba portege m300 to this new wireless signals.

In terms of information, the computer is running windows 7. Wireless network card is Atheros AR9002WB-1NG.

If theres any other information that you need, as im sure there will be, I would like to know and ill try my best.

The router is really new.

Thanks for your help

> the computer is 2 months old, the Wlan driver is up-to-date. power options have been configured to be on maximum performance for Wlan etc etc.

The latest Wlan drivers can be found here:
http://APS2.toshiba-tro.de/WLAN/?page=downloads

Please keep in mind that you use the latest driver v9.2.0.419.0

To be honest, I had the same idea to disable the power save for Wlan and it more often it should work are you sure that you have changed this in the same power station that is used when the laptop is running on battery power?

However, it would be interesting to know if the Satellite L750 uses the same Wlan 802.11 standard, as do other portable
In the Device Manager-> properties-> Advanced tab Wlan card, you can choose the standard Wlan 802.11
Recommend to check this

Tags: Toshiba

Similar Questions

  • Satellite L750 - droping internet connection Wi - Fi

    I bought a laptop toshiba Satellite L750 yesterday, I've updated all the drivers, but nothing change still a hub connection fall super media Virgin (netgear router).

    Its right in the same room but the other room drop-down from 5 to 1 and sometimes I internet.maybe to lose someone had the same problem and give me some advice on how to fix it.

    Thank you

    > Whole in the same room but in other room to drop down from 5 to 1 and sometimes I lose internet.

    It looks like WiFi signal isn't strong enough and this is the reason why interrupt the WiFi connection.

    As Feliks mentioned; It might be possible that wireless network card does not receive enough power while running on battery then change the WLan settings in Win 7 power option for maximum performance of energy saving

  • On the Satellite A200-1CR wireless connection is not working properly

    Hello

    I have a problem with my wireless connection. In spite of I stay close to my router I can't access the Internet.
    If I have the connection, it is the level of 1 to 3 (5 is best).
    I have the same problem with "hot spot". I can't access the Internet or use only messenger, can't surf the Internet, check my emails, etc..
    Another person do not have this problem in the same places. They can access the Internet. What's wrong? Can you help me?
    I have a Satellite A200-1CR.

    Piotr

    Hello

    For most Wlan issues are related to problems of compatibility between the wireless network card and the Wlan router.
    Sometimes the Wlan driver allows to obtain the best performance.
    So, try to update the WLan driver first. Maybe it helps.

    Good luck

  • PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

    Hello
    Member of the Community/Forum

    Model name - laptop Hp Pavilion 15 (15-p001TX)
    Questions - Brodcomm 802.11n wireless adapter not Worming.

    Problems-
    I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.

    Problems are the following:-

    1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.

    to re work I need for wtich forcefully from the power button.

    2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.

    Here are the ways I've tried.

    1. that tick managent of power, I have UN ticked (from PROPERTIES)

    2. using the CMD, I reset

    3. I DID cofig automatic Wlan disable (and put it on startup)

    4. update the drivers to the latest Version.

    5 install the latest drivers from the HP website brodcomm or even other Web sites.

    No the above to help me out.

    3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.

    Please please suggest the Suggestion and the ways out sorting valueable.

    He's really frustrated now, I do not understand what are the ways to my wifi on working condition.

    Thank you

    Kind regards

    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Aditya Rai
    Aditya Rai

    Hello @adityarai82,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

    Try to review these steps, offered by community member @Great-Christine-Tree:

    First of all, we have a step by step guide to guide you through the process of diagnosis here:
    Troubleshooting your wireless network and Internet access

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Source: fixes Common for wireless connectivity problems.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Satellite L300 - losing wireless connection

    Hello

    (loss of wireless connection)
    I'm not technical interest in this area, but rather disturbing and it is worse, I thought I would post this question to see if anyone new what it was.

    This laptop is new (Toshiba Satellite L300-1BV) Home premium 32-bit.
    This happens a lot and it can be "A PAIN" and really fustrating, I suddenly lost my wireless connection and I can't view available wireless networks to try to connect again, especially since I have to restart the laptop and everthing is back to normal.

    He can be nice days then all of a sudden, this will happen, but why am I not pick up all other available networks.

    Network provider... BT YAHOO TO BROADBAND
    Router... BT HOMEHUB 2.0
    network card... REALTEK RTL8187B WIRELESS 802. 11B / G 54MBPS USB 2.0 NETWORK ADAPT.

    I know for interference and have done everthing possible to avoid this...

    Hello

    -Update the display driver
    -Update the BIOS
    -Disable the Save feature in WLAN power Windows power management
    -Check the WLAN standard (for example: 802.11 g or Draft N)

    In addition, you should read the hundreds of threads here in the forum on the problems of WIFI. It might be very useful! ;)

  • Satellite L300-1BW - wireless connection stops working after 10-15 minutes

    Hey!

    Just brought me a new laptop. Sound of the Toshiba Satellite L300-1BW. However, I've encountered a problem. I can connect to my home network wireless fine. However 10-15 minutes after browing internet, my just wireless connection will stop working.

    When does he say 'Local & Internet', 10-15 Minutes after that, I would say just "Local."

    I know full well it's not my Netgear because it work fine on all the other my computer.

    IM wondering if anyone could possibally help me. I would be grateful anyhelp.

    Thank you.

    Edit - seems work correctly with my laptop not charging. However when the power adapter is in charge of the laptop, it work for 10 minutes then stop.

    Hello!

    If you use Windows Vista, you must disable the WLAN energy saving function. You can find it in the Vista power management options. Check it!

    In addition, you should try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

    Last but not least, I would recommend that you read hundreds of discussions on the problems of WIFI. You will find so much tips and tricks how to increase the WLAN functionality and troubleshooting.

    Good bye

  • Satellite M70-173: wireless connection is not working properly

    Hello

    I am a novice and need help with Wi - Fi. I have laptop Satellite M70-173. My desktop pc is connected to the Netgear MR814v3
    802 11b cable/DSL with wireless router. I have connected the router to my broadband (telewest) and have access to the internet on my desktop pc. I turned on the connection Wireless via the menu of the router (the lights is on the router it's transmission). My wireless laptop is switiched on, BUT when I use windows on the laptop to get a wireless connection, nothing is detected. The laptop is 50 cm from the router. I tried and did the following:

    Firmware update,
    Made sure the SSID is the same on the router and the laptop.
    Wireless on laptop mode is on infrastructure,
    Wireless access point is enabled.
    List of access on the router is enabled,
    No encryption is used until I have run

    Any ideas any help?

    Thank you

    Hello

    Have you activated the wireless antenna?
    Please check if the switch wireless on the side of the unit is on. Also check if the wireless is turned on with the FN + F8 key combination

    Please check this possibility

    Concerning

  • Satellite L500 - lost wireless connection

    My Satellite L500 recently lost the wireless connection. I looked towards the top of the Realtek wireless device in Device Manager and it says that the device is functioning properly. I tried to use "ping 192.168.1.1" join the router, and I get "error Transmit - general failure."

    Any ideas?

    Hey Buddy,

    And now Windows recognize some WIFI networks at your fingertips? Your validation lost wireless connection isn't very useful

    You should try a WLAN driver update that you can download from the official page of Toshiba:
    http://APS2.toshiba-tro.de/WLAN/

    If you can't find or connect to WLAN networks deactivate in the Windows of the WLAN power save mode power profiles. You will need to set for maximum performance.

  • Satellite L500 - no wireless connection

    Hello

    I bought 2 notebooks to Christmas for children, but cannot get them to connect to the wireless connection.

    I contacted Toshiba helpdesk and they want to contact me my internet provider.
    I'm a bit confused at this but as I have other laptops and they had no problem.

    I can see the connection, but it wont let me connect saying something like "(Impossible de se connecter àle réseau local sans fil-c-15) '? '."

    Laptops are L500 and I tried to update the driver but there seems to be a problem with that too.

    Any help would be greatly appreciated.

    Hello

    First of all it is important to know if your router is configured correctly.
    The WLan router must be configured with all the data from ISP (internet service provider).

    You said that other laptops can successfully connect to the Wlan router, so I guess that the router is configured properly.

    Now, you should check the WLan settings books;

    -WiFi must be enabled. To do this, you need to use the FN + F8 key combination. The small Wlan icon will appear.
    -After that, you have to choose; you will use own WLan configuration options of Windows or you must use a third-party tool 3rd as utility of Atheros Wlan or Intel Proset wireless wifi connection utility.
    -WLan parameters must contain the right SSID (name of the Wlan), the right encryption and password.
    -In the WLan connection TCP/IP Protocol, IP and DNS settings must be defined to automatically get
    -The MAC address filtering should be disabled in the router configuration if you don t want to insert the available wireless network cards unique MAC addresses

  • BlackBerry Z10 z10 Wireless Connection issue

    A minor quirk I noticed with my z10 in recent months - when I have both Wifi and cellular radio links on home wireless connections sometimes seem to struggle (in particular applications such as Facebook, Twitter, PGA Tour).  If I disable WiFi then answer is very good - I'm on LTE of Rogers: is it possible WiFi and LTE conflicted sporadically somehow?  Our iPhone doesn't seem to have this problem, but it's a non iPhone 4S LTE.

    Just installed the latest patch of OS but no change to the present

    I recommend you:

    • Delete the WiFi profile saved on your Z10 (Settinggs > network connections > WiFi > find your connection and open it and choose the trash below to remove.)
    • Restart the Z10 (hold the top power button down a few seconds > restart at the bottom right)
    • Then set up your WiFi connection even once again.
  • Satellite Pro A60 Wireless connection problem

    Hello

    I have a Satellite Pro A60 which was connected to our main office using a Linksys Home Wireless - G USB adapt to I can share files and also connect to our connection broadband. The main office is connected directly to a G from Linksys home wireless gateway. It worked fine then for no reason (no settings have been changed or installed software) the laptop does not connect to the desktop or the internet. The software Linksys says that it is connected to the access point, but the internet cannot be found. Even if he says that it is connected I can't get to the desktop.

    I tried to set up a dial-up connection independent for updating drivers etc, but after the normal dial tones, he says that it cannot connect to the remote computer.

    We tried everything that we think would be grateful for any ideas. Please speak slowly and distinctly also even if I know a little technical jargon computers is a language that I'm not still commonly!

    Thank you very much

    Hello

    It's really not easy to say what can be the problem. In my opinion, you must remove all the settings and adapter WLAN Device Manager. Restart the unit, reinstall the wireless card and make a WLAN configuration again.

    In my opinion, it is very important to know if the WIFI network of the device works correctly, and if you are able to share files between the laptop and our main office. If it works properly again check the settings on our front door.

    One is the problem with Notepad or another device. If someone of your friends has a WIFI at home, you can try to check the laptop WIFI functionality. On this way, you can be sure that if the problem is caused by your Satellite Pro.

    If you find a solution please let me know what the problem is.

    Good luck!

  • Satellite Pro L20: Wireless connection is not reliable

    Hello

    We have some Toshiba laptops in the office.

    However, the wireless on our most recent purchase (Satellite Pro L20) installation is very reliable. Periodically he loses sight of the network without apparent reason.

    We have the device permanently connected, and the problem can occur even when the machine is in the middle of copying files to and from the network server.

    The actual wireless access point is within a few feet of distance (in view), so I can't imagine there is a problem of signal strength. Can anyone offer me any guidance?

    I don't know where to start on this one there...

    TIA
    Stephen

    Hello

    With a WiFi card has your unit (listed in the Device Manager)?

  • Satellite L50-B916 - wireless connection problem

    Hello

    I bought my Toshiba Satellite L50 B916 less than 6 months ago and had to download all the drivers for myself because for some reason, the operating system has not come with her.

    Went to the site of TOSHIBA MEA to download and install the corresponding drivers.
    Downloaded the Atheros wireless driver.

    Still, the Internet connection disconnects on my laptop, but works fine on other laptops and devices.
    Not just a connection, all the ones I tried to connect to.

    Tried to remove Atheros and re - install, it worked fine for a few days, but the connection disrupt again.

    What should I do to solve this very annoying problem?

    Hmm... made it happen using the laptop in battery or also while mode that the adapter is connected to the laptop?

    It might be possible that the powers of WiFi, saving settings are enabled, and therefore stops the WiFi connection.

    Reach:
    Windows power options - choose the right central - advanced power options.
    Search of the WLan card settings and set it to "best performance".
    You must also set the parameters for the PCI express for the 'best performance '.

    In addition, go to the Device Manager. Choose here the Wlan card properties
    Switch to the last tab called "Power Management" and make sure that the option available in this tab is not checked!

  • Satellite A300 and wireless connection problems

    Recently, I had to use my recovery disk and restored my laptop to factory settings. Almost everything is back is the way has been, except for a small problem.

    The WiFi does not work. It is on, but when I go to connect to the wireless family network, it tells me to insert a cable.

    My laptop is the Satellite A300 - model psagca.

    I install the drivers of Realtech and still not get the case.

    Thank you in advance.

    Your wireless network is not visible to your laptop satellite?

  • Satellite Pro 4340: Wireless connection problem

    I can't connect my sons Satellite pro 4340 using a belkin preN wireless card Belkin router to take are there problems that I need to know or anyone could do that?

    Hello

    Well, if you want t use WiFi, you must pay attention to the different settings and options.
    First of all, are you sure that you have installed the wireless network card correctly and it appears in Device Manager 100%?
    Please check!

    After the properly installing the LAN on laptop computer card, you must configure the WLan router.
    For most installation instructions delivered with the package and you will need to follow these guidelines!

    For the first time, I would not recommend to set of ciphers.
    You must first test the connection without encryption, and if it works then you can allow it.

Maybe you are looking for

  • iPhone battery percentage 6 iOS 9.3.1 showing incorrect

    I have an iPhone with iOS 9.3.1 6.  In recent weeks, I noticed the battery percentage does not display correctly.  It shows 100% for hours after disconnecting the charger.  He dies when the percentage of battery indicates 25 to 28%.  How can this be

  • Extermal Toshiba USB 320 GB HARD drive not recognized correctly

    My hard drive does not recognize now them itself as a hard drive just an AT2P RC42 Cypress and is now useless after a few months in use. I uninstalled and reinstalled by the Device Manager. I then tried on another computer and I have the same problem

  • < help > how to disconnect?

    How to connect to Skype on Mac?

  • NB200-10Z connection external monitor problems

    Hello I tried to connect my NB200-10Z to my LCD TV using a VGA - DVI connector. Now, I have connected my DVI cable into the socket, then the TV. For some reason any TV is not recognized by the netbook. I tried the FN + F5 key and it only shows the lc

  • Macrovision Software

    Macrovision software - some time when I power my computer is perhaps several upgrades and someitmes it crashes just on '6 of 10' or any other number of 10 and the only way to roll it is to power down and power back up - it does not appear on the list