On this device, \Device\harddisk0\D Event Viewer, has a bad block.
I ran is a disk utility program that I write with this and what I'd like to know... Does this mean I have to replace the hard drive? If this is not the case, what is the next action plan I have to take. I really appreciate the help. I am running the following: Windows xp 32-bit home edition Version 2002 service pack 3 on a HP Pavilion dv5020us.
Is there any other information you need from me?
Yes, I'll try the zerofill low level and if it don't it... .i guess its time for a new hard drive. Thank you for your quick response.
Tags: Notebooks
Similar Questions
-
I have a Dell Dimension 2400 with Win XP PRO SP3. It keeps closing after half an hour to an hour. The event viewer shows the following error in the system log: \Device\Harddisk0\D, has a bad block
Same thing happens in Safe Mode as well. I ran McAfee who reported no virus. I have auto-updated from Microsoft on and just installed the lates updates.
Help, please. Thank you... Nam
Speed stop?
Unexpected/unpredictable and quick stops are generally caused by overheating or bad RAM modules. This happens too fast to create an entry in the newspapers. Try downloading / running the freeware 'CoreTemp'. It will show you how hot your CPU is getting and how close to maximum temperature, it is. If this is your problem, open your folder and check your fans to make sure they turn all. Use a can of compressed air to remove dust, because it can act like a blanket and heat your components.
To solve your problem of bad block, run "Chkdsk" with the 'repair' or ' / R ' option. This should clean up your bad block problem.
"How to perform the disk error checking in Windows XP"
<>http://support.Microsoft.com/kb/315265 >
HTH,
JW
-
I use my desktop computer to post my question, my laptop has the error. First, he appeared on the journal 09/12/2010. Said event properties' Source: disc, it gives the date and time, category: no, Type: error event ID: 7, critics: n/a, computer: laptop, Description: device/Device / Harddisk:O, / D, has a bad block for more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
It has not helped me, does anyone have any suggestions?
This means that the player has / is a failure and should be replaced.
Your laptop may have preinstalled utilities test which can be consulted before starting, manufacturers mobile site would give information
-
"The device, \Device\Harddisk0\DR0, has a bad block" on Dell Vista SP2
I am repeatedly getting the error "the device, \Device\Harddisk0\DR0, has a bad block." in the event viewer. Recently, I fixed a security problem that prevented me to install windows updates. For this, I ran CHKDSK (see results below), System File Checker, and a complete analysis of the system of McAfee, spybot and Malwarebytes, both in security and the good start. How can I check for errors on my HARD disk?
--------------------------------------------
My problem earlier wire: http://social.microsoft.com/Forums/is/genuinevista/thread/60c76236-abd2-4fea-8980-007f424a8eb0Although most things seem to work very well, "the device, \Device\Harddisk0\DR0, has a bad block." error still occurs in the event viewer despite the installation of updates/CHKDSK and SFC. Check the results of said disc 'the volume is clean' and the System File Checker showed no errors. Windows resource protection did not find any breach of integrity. Any ideas, what is happening?
In addition, I don't know if this is related, but a problem with the wireless network connection keeps recurring. "Windows wireless service" is not automatically start during the boot. It must manually be diagnosed and started. He gave the following error message:
In network connections, the IPv4 and IPv6 protocols are verified and most up-to-date driver software is installed. When I tried to update the drivers under devices, I got the following message. "The best driver for your device is already installed. Windows has determined that the driver for your device software is up-to-date.
-----------------
New report MGADiag after CHKDSK runs and the installation of the updates.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - F4GJK - KG77H-B9HD2
The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =
Windows product ID: 89578-OEM-7332157-00204
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {A5A5B929-9AF8-43E5-A311-544A304C88A3} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: 6.0.6002.16398Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: 2.0.48.0
OGAExec.exe signed by: Microsoft
OGAAddin.dll signed by: MicrosoftOGA data-->
Office status: 114 blocked VLK 2
Microsoft Office XP Professional with FrontPage - 114 VLK blocked 2
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{A5A5B929-9AF8-43E5-A311-544A304C88A3} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 32 *-*-*-*-B9HD2 89578-OEM-7332157-00204 2 S-1-5-21-3777094449-617660858-91839038 Dell Inc.. MM061 Dell Inc.. A14 20070402000000.000000 + 00056303507018400FE 0409 0409 Central Standard Time(GMT-06:00) 0 3 DELL M07 114 114 Microsoft Office XP Professional with FrontPage 10 4iCnywwNW1w4s9ukTIwGMGxyGic = 54185-640-0000025-17989 14 39476F84C4B4004 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89578-00146-321-500204-02-1033-6000.0000-1402007
Installation ID: 007894240565911961931104634943657564676410030663392174
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: B9HD2
License status: licensedWindows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OAAAAAEABQABAAEAAQABAAAAAwABAAEAJJRiENrxWFBy8jZ2jNDqTizZupDy9IwU5rIQVqxW9Eg =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL M07
FACP DELL M07
HPET DELL M07
STARTING DELL M07
MCFG DELL M07
M07 DELL SLIC
SSDT PmRef CpuPmHello
You look at the statistics of SMART to see if the hard drive is a failure.
http://mikemstech.blogspot.com/2011/12/how-to-detect-failing-hard-drive.htmlIf he is not in default, you run chkdsk /f /r to ensure that bad sectors are marked. One way to do this forum works it offline.
http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.htmlIf the disk is failed, you may need to save your data,
http://mikemstech.blogspot.com/2011/12/how-to-rescue-files-from-damaged-system.html
-
\Device\HardDisk0 has a bad block
I am receving since past two days the same message.
\Device\HardDisk0 has a bad blockWhen I click details it shows the name of the next file.IoLogMsg.dllMy operating system is: Windows Server 2003Can you help me?MF
Server questions should be asked on the Technet site
http://social.technet.Microsoft.com/forums/en-us/home
-
This often appears in the event viewer
original title: is this a problem I should correct IO_WARNING_PAGING_FAILURE?Hello
1 are. What is the exact error message or error codes you getting?
2. what operating system is installed on the computer?
3 are you facing problems on your computer?
4. don't you make changes to the computer until the problem occurred?
Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:
Suggestions for a question on help forums: http://support.microsoft.com/kb/555375
See the link below for more details:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
(For Windows Vista)
-
The device, \Device\Harddisk1\DR1, has a bad block.
Hello world
After scanning FAT/FAT32/NTFS partition with the attempt to recover bad sectors, the system marks all free clusters as bad.
The event log is then filled with error messages "the device, \Device\Harddisk1\DR1, has a bad block.".Hard drive is 100% healthy. I bought three weeks ago. I am 100% sure that there no erros surface, because I tested with Seagate SeaTool and HD tune Pro.
I tested it on three computers different windows 7 and I still got the same error.
CnMemory support won't accept as an error, they say that it is the problem of Microsoft Windows 7.Here is one video.
Some info:
My OS = Windows 7 x 64, with all updates until the 2013.03.29.
Product name = "CnMemory Spaceloop 3 TB USB 2.0 sata external drive»
Inside of the box is Seagate ST3000DM001 SATA 3 TB hard drive with 4 k sector.Thanks for the help,
EduardHi Edward,
Welcome to the Microsoft Community Forums.
It seems that the system marks all free clusters as bad and the event log registered as "the device, \Device\Harddisk1\DR1, has a bad block. We will analyze and identify the cause of the problem.
Perform the steps:
Method 1:
Queries or sets the bit of impurity of a volume. When the volume dirty bit, one is set, autochk automatically checks the volume for errors the next time the computer is restarted.
Syntax-
fsutil dirty {query | value}
Reference:
Fsutil dirty
http://TechNet.Microsoft.com/en-us/library/cc788091.aspx
I would like to know the output of the following command:
fsutil fsinfo ntfsinfo
Method 2:
You can run Chkdsk from WINRE.
In order to solve this problem go chkdsk from WinRE (Windows Recovery Environment) mode and search for the issue.
You can follow these steps to run CHKDSK:
a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).
b. in WinRE, open a command prompt. To do this, follow these steps:
c. on the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.
d. click on repair your computer.
e. click on the Windows 7 installation you want to repair, and then click Next.
f. click on command prompt.
At the command prompt, type the following command and press ENTER:
CHKDSK drive: / p
CHKDSK drive: / r
CHKDSK warning:
Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Hope this information helps. Get back to us if you have more queries about Windows.
-
Original title: SYSTEM ERROR - error Code 0 x 70020, July 27, 2011
I got an error Code 0 x 70020 and stopped and restarted the computer. but when I tried to use system restore, I get the message "system restore is not able to protect your computer". I am not a Curmudgeon, one got any ideas what the problem is and how I can get around it.
I also watched the errors of advanced system information log which had a message dated April 24
"Disc 2 device\deviceharddisk1\D, has a bad block.Not sure if this has any relevance?
Hello
· What is the service pack installed?
· What is the number and the model of the computer?
· Do you remember any changes made on the computer before the show?
· You have security software installed?
· You have a Windows XP Setup disk?
Try the methods and check the results below:
Method 1: Manually run the Chkdsk disk scanner. To do this, follow these steps:
a. Click Start, click Run, type chkdsk /f /r and then click OK.
b. at the command prompt, type Y to let the disc run when you restart the computer.
c. restart the computer.
d. Chkdsk runs.
Method 2: Scan virus online and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
You can also see: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796
-
Description: the device, \Device\CdRom0, has a bad block.
I have McAvee. A month ago a Trojan plopped o program my screen that said it was Windows and set the virus if I would be a click. I knew better than to restart... It ruins your computer of my husband 5 years ago.
I saw that once again, but since I had a lot of problems. The INVESTIGATION period didn't recognize me.
I now have a PC Health Check, which appeared and he had my name on it IP. Now I see it's been blocked.
First of all, I couldn't start up right. I had to choose F1 or F2. I fixed.
Online has been a problem. I think I have two or three different names.
All my backups do not appear so I can reinstall to an earlier time. I can not restore from disk.
Now it says I have a bad block and it is something on my CD. Description: the device, \Device\CdRom0, has a bad block.
Hello
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
Recently, I got the error "device harddisk0 has a bad block" in Event Viewer and this has happened two times at the same time. I looked at and most people say that I do not understand is that I had this error before on another computer and the hard drive still works fine, but it is the failure of hard drive and it was many years ago that there are errors of disk on that computer. Is it possible that this means not always that hard drive is a failure? Thank you
Blocks will bad for various reasons from head crashes to interruptions of current momentary when writing. A few blocks will wrong here there is no major cause for concern, but if you start to get multiple occurrences then you should start thinking about replacing drive... and certainly to keep your current backups. The only thing you should do when you start getting bad blocks must be running a full disk check (chkdsk with the option/r or f). It detects bad blocks and formally to mark these blocks as being 'wrong' for the operating system do not. It should also avoid getting several warnings for the same bad block bad block.
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >WARNING: A complete check-up of the boot volume occurs after a reboot, it cannot be interrupted, and it could last for hours. Run this control when you won't need your computer for awhile.
HTH,
JW -
I receive thousands of billions of these error messages in the event viewer. My CD player broke and he was writer b replaced a regular CD; It can also play DVDs that fine for now. I think that the error may be because the system recognizes the change. However, when I check in the Device Manager it says that the device (the CDRom works. ??!! Need help!
Hello
In most cases, this error is displayed if the CD, DVD or Blu Ray, who is currently in your drive has a bad sector block.
Method 1: Insert the new CD drive, remove the drive defective media from your drive.
Method 2: You can also try following the steps from the link.
http://support.Microsoft.com/kb/314060
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/
For all windows questions do not hesitate to contact us and we will be happy to help you.
-
EVENT VIEWER HAS STOPPED WORKING!
My OS is Windows 7 64-bit, 800 GB hard drive and 2 GB of RAM right now. I played an old game on a CD and then it just crashed. I opened the event viewer for the resolution of problems and it says check if Event Viewer runs.
I am totally astonished that this happened because I have read this on forums but, it was for Vista only. Any suggestions would be welcome and one that works, I'll answer for your expertise. Thank you...
Shekhar s,
I want to say thank you very much for the 100% correct answer, you sent me. I thought I had to do a complete restore with the Installation diskettes.
-
Event Viewer has perflib and repeated pc blue screen error
My husband PC crashes which is especially used for WOW; When I checked the critical errors with perflib event log are the problem. I don't know that Vista had hoped for the entry of any person who might have had the same problem, do fix while it goes back into his room.
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Why my event viewer has continued to record events?
I heard a strange noise come from my speakers to the computer occasionally, so I made an indication of the time when it finally happened. Not a of other things first, then open the event viewer. There are no entries since 19:30 yesterday. It is not normal that my setup. Event Viewer always displays something during the day, even just minor activities. Any tips?
-
Source: disk (hard disk). What causes this prob.? Please help
I use 2 OS, is this a reason, when I try to enter the folder of diferent OS or something like that?
In computer discs right click and choose Properties, then the Tools tab.then click on check now. Check that the TWO boxes and then start. Reset. This willtake from one day to the next.After the execution of the check above for the file curruption (in the case of the bad block is)used by a file)I'd give System File Checker go.Click on Start - Programs - Accessories - right clickCommand prompt and choose Run as administrator. Typesfc/scannow--..--"Lawliet Ryuzaki" wrote in messageNews: 316693 d 4-01ac-4efd-ab5e-684b170f22c8...> Source: disk (hard disk). What causes this prob.? Please help>> I use 2 OS, is this a reason, when I try to enter in different OS> folder or something like that?>
Maybe you are looking for
-
I want to choose my options of history, not allowed to do
My company has recently updated our 'policy', and now in Firefox my start page can be changed for the selected site company (I want to use the option to start with the previous tabs) and my privacy settings are set to never remember history. If I cha
-
Do not read the cd copy control emi on pc!
HelloI have the satellite a60-160my pc does not read any cd music emi copy control...How can I do to listen the cd on my pc?Please can someone help me...
-
Problems of space satellite A210
I bought a Satellite A210 is about 3 months and I continue to receive messages saying there are less than 10% space left on the C drive.I download music files (account with emusic) and burn CDs, but I delete the files once I burned the. Other than I
-
The URL drop-down list has a Web site, that I am trying to permanently remove it from the history, but continues to appear. I tried delete history in many ways and always appears
-
Stop disc spinning when installing a game... (the installation stop)
Hi, I sat with this problem for some time, with vista + sp1, the problem is, when installing games on my system, the game will install but only up to a point, then it stops and the driver (cd - dvd) repeatedly turn hangs just at the same place and th