One-touch Dialer

Similar Questions

• One touch dialing on Pre

  I've been hunting around, but have not found a way to make a quick keys for commonly used phone numbers.  Can someone point me in the right direction?

  I see nothing which indicates the composition of speed or anything nearby.  I think that I'm not completely understand what you're saying.  I open the contact and tap the upper left corner, but their names and numbers to come.

  Another issue is that when I compose and the phone starts ringing, the screen goes black and I can't it upwards so that it always sounds.  Any way to avoid this problem?

• I have just updated an Alcatel one touch fire to version 1.3 (firefox OS) and the market no longer charge

  I have just updated an Alcatel one touch fire to version 1.3 (firefox OS). Rigth after installation completed and restart, the market App has not loaded at all. He showed only a blank page and the exit button (x) that have nothing. I also tried to access market from the pre-installed browser (firefox), but the result was the same.
  E-mail has failed also. A message that a secure connection to the server imap.googlemail.com was not possible and that the certificate is not valid, appeared (something like that because it's in Greek). How can I fix these problems? If not, how I can return to the previous version (1.2) rll?

  Hello, can you check that your clock system, the date and time are always well positioned?

• Alcatel one touch fire will not be updated.

  It's June 9, 2014 and my alcatel one touch fire works always firefox OS v1.1. Whenever I check updates, the phone said I use the latest version of something that is obviously not true. I can't understand why it will not be updated. Any help would be appreciated.

  Hello Ralph Daub.

  Thank you for the information provided. They have certainly helped me to better understand the situation.

  I realize that Firefox OS starts a mobile OS compared to its competitors and it will run in a few hiccups.

  But anyway, I'll be patient until v1.3 gets properly evaluated and rolled on my device.
  Thank you for your support.

  -randomffuser

• alcalel one-touch 5005 X driver free download

  My pc don't see my alcatel5005x one touch on USB mobitel. How to get a driver

  Hello

  You get a driver for the phone from the phone manufacturer.

  Contact the manufacturer:

  http://en.Wikipedia.org/wiki/Alcatel_Mobile_Phones

  Alcatel Mobile Phones are a brand of mobile phones. It was created in 2004 in a joint venture between Alcatel-Lucent France and TCL Communication of China.

  TCT Mobile Limited (former name: T & A mobile phones Limited) is a member of the TCL Communication listed on the Hong Kong Stock Exchange (HKSE: 2618) which was created in August 2004 by TCL Communication and Alcatel. ^[1]

  TCT Mobile Limited manages three business units: ALCATEL Mobile Phones, mobile phones, TCL and Brand Design Lab

  See you soon.

• How to use Maxtor One Touch II and Retrospect Express

  I have Maxtor One Touch II and Retrospect Express 9.0.2.102. I guess the 2 go hand in hand, but don't know how to start.  I am backing up my files Mac 10.6.8.

  Hello

  You should check with Maxtor, Retrospect Express and Mac support.

  Maxtor is now Seagate - Support
  http://www.Seagate.com/support/

  Retrospective - Support
  http://www.Retrospect.com/en/support

  Apple - Mac - Support
  http://www.Apple.com/support/Mac/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm trying to interconnect a XP home and a XP Pro with a Firewire 1394 through a Maxtor One Touch 4 Plus HARD drive cable to share the HARD drive and also run a home network.

  Is it possible for me to take the files of XP Home that has installed 1394 controller and use the 4 files that I found marked 1394 in I386 to form the controller on my XP Pro, more driver 1394 in \WINDOWS\System32\DRIVERS to close the loop and enable the ethernet connection both 1394 on both computers to have two computers connected to the Maxtor One Touch 4 Plus as well as HARD drive the network. I was hoping maybe even replace the ethernet cable and use the connection 1394 through the Maxtor which has several types of connectors on it.  Again, I am trying to install a controller 1394 on a computer that has no 1394, than USB 2.0. so that the XP Pro machine will recognize the 1394 card with my home XP firewire cable to the Maxtor HDD which it is already connected to the XP Pro via USB 2.0? I have you confused yet?

  I found a post of S.W. video dated the 05/01/11, which has been handled by Gokul T and treated with the Firewire cable and video on a newer operating system, so I thought I would test Gokul T or someone else to resolve this situation. I couldn't find a controller IEEE 1394 I could just download and install on my XP Pro machine. These are the two Dell, is an inspiron 5100 with installed 1394 with taking and the GX280 is one without the 1394 controller installed, or the socket.

  You will need a firewire to XP Pro card. The drivers are already on the hard drive. Once the card is installed, you will see the icon of the network for this adapter. So you can use it.

  The reason why there is no 1394 net adapter on XP Pro is now, because there is no firewire card

• Maxtor external USB One Touch Mini III and HP Pavilion dv5000 series with Windows 7 Ultimate

  Hello

  I use Windows 7 Ultimate SP1 and I have HP Pavilion dv5191ea LT. I tried to connect an external Maxtor USB One Touch mini III hard drive and he would not recognize the disc. It's boring. I tried my best to find a solution, but I'm still without a clue. Anyone here who can help me? I would like help or the online guide that anyone of you can offer. Thanks in advance to anyone who can help.

  Danny

  No XP is not installed, but it was installed before W7. Anyway, I solved the problem. The asnwer is that all Maxtor mini III One touch external USB key comes with software that allows you to encrypt disks require a password to open the disc. If the password is enabled when you close the last time, then this will bypass the detection of the drive in disk management. You open the disc in an XP environment and hell security as it does not work in W7. After you do this, the disk is available in W7. This site has been a great help:

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=211851&NewLang=en

  Please help in this ad, while others may help.

• Driver for Maxtor One Touch III

  I use a desktop computer IQ528d HP touchsmart running on a 64-bit processor. I tried to get my Maxtor One Touch III work but my computer couldn't detect it. Message is cannot find the driver. I went into pilot Web site Maxtor and download OTC_EMC_Vista_Update [1], but my computer still couldn't work. Is the problem due to the fact that the driver will not work on a 32-bit computer? Otherwise, that's the right driver to use? Where to find it?

  Hi roger low,.

  Please use the Forum for answers.

  I have studied the issue and found that Maxtor One Touch III is perhaps not compatible with the 64-bit version of Vista.
  If you have contacted the OEM, and they can provide you with a driver, it may not work.

  Let us know how it works. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drivers for Visioneer One Touch 8600 Scanner for Windows 7

  Are there drivers for Visioneer One Touch 8600 Scanner for Windows 7

  Hello Pepe,

  According to the manufacturer support site, this product is classified as "End of Life". End of life means that it is no longer supported, which includes no new drivers. You can read this article for reference: specifications of Visioneer OneTouch 8600

  Thank you.

• Maxtor One Touch 4 external hard drive not recognized by Windows 7 64 bit

  It does not appear in Device Manager, and disk management.

  I tried all 8 USB ports on my computer.

  I have it plugged into different outlets (light still on) and tested it on other computers running Vista 32 bit and XP.

  The drive works fine on other computers, but not my new computer running Windows 7 64 bit.   Microsoft Compatibility Checker stated that this player should work with Windows 7 64 bit.

  I'd like to get this to work by car.  Any ideas?

  Hi Anthony Netties.

  Check if the hard drive is detected in the BIOS.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  While I was looking at the Seagate site, I came across this One Touch 4 is only designed to work with 32-bit operating systems only and is perhaps the reason for computer detects it not.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=OT4-downloads&vgnextoid=0ed72c9e46914110VgnVCM100000f5ee0a0aRCRD

  You can also run the sea tools available in the link below and check.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• One touch MAXTOR 4.

  Hello

  I have a MAXTOR one touch 4.
  It worked perfectly under VISTA then under W7.
  But for some time he changed letter E: / happened to I: / and when I try to open it, windows sends me: "I:\ is not accessible - access denied" thank you for your lights
  CRDT

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

   

  Hello

  You have asked your question in the English version of the Microsoft Community. Please, you would click on the 'Change Region' button down to the left of the screen and then to your preferred language. Now ask you question again.

  Thank you.

• Maxtor One Touch 4 Mini external hard drive not partitioned by Windows 7 PC

  I have a Maxtor One Touch 4 Mini external hard drive that has been formatted to originally a Windows XP computer. I have a new computer that uses the Windows 7 operating system. The drive hard Maxtor are not accessible by the new computer. Although the new computer reconizes the device by its name, the Maxtor Manager window displays the score as 'unknown '. Maxtor/Seagate technical support said that I need to move the files from the old external hard drive Maxtor on a new Seagate, external drive, using a Windows XP computer. Is there another easier way?

  Hello

  The Windows 7 Compatibility Center shows that the Maxtor OneTouch 4 Mini is compatible with Windows 7.
  However, given that it is a product of the 3 part, you go by what the Seagate support said.
  You can send this link on the OneTouch 4:
  http://www.Seagate.com/support/external-hard-drives/desktop-hard-drives/OneTouch-4/
  Important note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• TMS and WebEx One-Touch

  The telepresence Management Suite does support WebEx One Touch?

  If so

  What would be the best to use for integrating Cisco Telepresence and WebEx, if you BE6K with CUCM and VCS controlling the C-Series, Cisco TMS or Cisco TM ends?

  I look forward to your helpful responses.

  Hello

  I think that your first question is answered in this thread: https://supportforums.cisco.com/message/3880606#3880606

  / Magnus

  Sent by Cisco Support technique iPhone App

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA