Only 10 Mbps in Windows 2003 SE VM

Similar Questions

• read only problems with windows 2003

  All my folders and subfolders even those I just create my windows 2003 Server are set to read-only, I used windows Explorer to remove the read only status it had back write after I removed it, I used the command attrib - r - s, that he did not. can anyone help?

  Advance Thank'sin

  These MS Answers forums are intended for the home rather than the it professional user. Please repost your question in the relevant Microsoft Technet Windows Server forum here:

  http://social.technet.microsoft.com/Forums/en/category/windowsserver/ .

  Thank you.  :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Error message on Windows 2003 and Satellite M40x-184

  Hello
  my laptop is Satellite M40x-184
  with Os Xp Home edition
  I want to insatall a second operating system which is Windows 2003
  but when installing it, came a problem and gives me a blue screen with this message:

  "' hardware malfunction nmi parity check / memory parity error is interrupted" "

  Please tell me how can I install 2 Os xp home edition and Windows 2003

  Thank you

  Hello

  This error message can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  To resolve this issue remove additional memory modules that are installed on the computer, leaving only the minimum required for the computer to start and run Windows. Restart the computer to see if the error messages persist.

  This issue has been described on the Microsoft Web site.
  Please see this site:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp

• M70-159: need graphic driver for Windows 2003 Server

  Can someone tell me wheather I can install windows 2003 server to series M70-159 .
  I am trying to download driver for sound card and many other cards, but I'm not able to get one for windows 2003

  Hello

  AFAIK, this device was shipped only with Windows Xp. In this case only the driver for this OS are available.
  Windows 2003 server edition is not a common operating system, and unfortunately, I do not know if you will find anywhere the right Toshiba drivers for this operating system of m.

  Good bye

• Access by Mac for windows 2003

  Hello

  I have an old WHS with windows 2003 and I now have the need to access my mac share. The Mac share is activate and works perfectly in my windows 7 machine and windows 10.

  When I connect on windows 2003 and try to access the share \\ip\Documents I get the name of user and password pop up and I am sure that I put the user name and password, but I still get reprompt with the window.

  I guess its something to do with the negotiation of NT or something. can someone help if I can access my share of mac for windows 2003?

  Thank you very much

  Vassilis

  the fixed.

  Local security policy, authentication NLTM v2 only set LAN

  Yes!

• Windows 2003 FRS is horribly wrong.

  I have a number of these installed and operating in the field.
  And, until now, has been a great backup strategy multisite on low-bandwidth links.
  I got some of them running for years without problem.

  Today I had a bad go.
  A "routine check" during an overdraft of site replication has been down for about 4 months.
  I ran out of staging space (so I increased the it) and at the same time, I moved the staging on another drive.
  2 hours later, I got frantic reports of files & folders "disappear" on the MAIN server.
  It is true, about 45 GB of data was simple DISAPPEARED.
  I did a reboot of the server in the evening and then was missing about 10 GB more.
  I have a large share, and most had disappeared.

  I also noticed that my new drive, frs staging folder is located at about 55 GB in size, I guess it's sort of where all the missing files are gone.

  Sadness.
  My only backup is the remote backup site which is... 4 months...
  So miss me him now all my data from the last 4 months.
  It is a terrible mess and I deserve to get lax on manual backups :-(

  Just having good luck with the RFS mirrors and got comfortable relying on them to work over the past 5 years.
  In addition to this, I'm not * normally * one who executes and monitors manual backups / more frequent.

  Anyway, I finished by Disable FRS entirely and end up with the FRS staging folder as my only hope of ever no data to return.

  I already know what I did wrong and do not want to hear that I should update to a new product of best, I'm already aware of these things.

  I am looking for all possible assistance or any information leading to help free or paid to actually retrieve files from the location of FRS-scaffolding.
  And has already exhausted my obvious options and places seem to be including paid Microsoft support...
  MS simply didn't want to deal with, or that they wanted to support WIndows 2003.
  After two hours of literally to search my system...  They made less test and gathered much less information that I already had on my own.
  They're refund my credit card for 2 hours of paid support I have nowhere.
  I could tell that the tech was not at all well versed in FRS or DFS systems.

  :-(

  Yet once, help, please and thank you!

  -Steve Gladden

  Try asking in the Windows Server forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• On a windows 2003 R2 SP2, gives error 1053 SNMP service startup

  On a windows 2003 R2 SP2, start the service SNMP gives error 1053 (below)

  

  In the event log are event ID: 7000 & 7009 back (below)

  

  

  Already tried: https://support.microsoft.com/en-us/kb/886695 (check the "allow service to interact with desktop").

  I have also run the Windows updates for all high priority updates, replaced the files %windir%\system32\snmp*.* with those of another R2 SP2 server that is not the problem (after rename the original to the *.old files & copy the same files in the folder DLLcache so SFC would stop interfering ;)) and checked for other errors that may show a reason for this - the only thing that I can connect to it) , it is that services IISAdmin & GoogleUpdate (gupdate & gupdatem) having the same problem, but unrelated to seams...

  TNX in advance for any response.

  Kobi

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Upgrade of Windows 2003 to 2012 r2 DC replication problem

  Hello

  I added R2 2012 Windows server to windows 2003 sp2 (primary DC) DC and promotes as DC. After the promotion, I run dcdiag and it shows errors.

  Each of the servers have three NICs connected to different networks.

  Please help me with your expertise since I have to raise this Monday.

  Thank you

  Kind regards

  Charaf-eddine

  Here the dcdiag output new DC

  Directory Server diagnosis

  Perform the initial configuration:

  Trying to find the server at home...

  Home Server = CADPDC1

  * Identified AD forest.
  Made the initial collection of information.

  Make the required initial tests

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: connectivity

  CADPDC1.engineer.com host name resolution error by

  IPv6 stack.

  WARNING: could not confirm the identity of this server in the

  Directory and names returned by DNS servers. Host name

  fixed error 0x2af9 "host is known."

  ......................... CADPDC1 passed test connectivity

  Primary testing

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: advertising

  WARNING: DsGetDcName returned information for

  \\cadpdc. Engineer.com, when we tried to reach CADPDC1.

  SERVER IS NO ANSWER or IS NOT considered AS APPROPRIATE.

  ......................... CADPDC1 was not able to test advertising

  Beginning of the test: FrsEvent

  There are warning or error events in the last 24 hours after the

  SYSVOL is shared.  Don't not SYSVOL replication problems can cause

  The Group of political problems.
  ......................... CADPDC1 test FrsEvent

  Commencement of the trial: DFSREvent

  ......................... CADPDC1 test DFSREvent

  Commencement of the trial: SysVolCheck

  ......................... CADPDC1 test SysVolCheck

  Beginning of the test: KccEvent

  ......................... CADPDC1 test KccEvent

  Beginning of the test: KnowsOfRoleHolders

  [CADPDC] DsBindWithSpnEx() failed with the error-2146893022,

  The name main target is incorrect...
  ATTENTION: CADPDC is the owner of the schema, but does not meet the DS RPC

  Bind.

  [CADPDC] LDAP bind failed with error 8341,

  A directory service error has occurred...
  ATTENTION: CADPDC is the owner of the schema, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of RID, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of RID, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  meet DS RPC Bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  respond to LDAP Bind.

  ......................... CADPDC1 failed test KnowsOfRoleHolders

  Beginning of the test: MachineAccount

  ......................... CADPDC1 test MachineAccount

  Beginning of the test: NCSecDesc

  ......................... CADPDC1 passed test NCSecDesc

  Beginning of the test: NetLogons

  Cannot connect in the NETLOGON share. (\\CADPDC1\netlogon)

  [CADPDC1] An net use or LsaPolicy operation failed with error 67.

  The network name was not found...

  ......................... CADPDC1 failed test NetLogons

  Commencement of the trial: ObjectsReplicated

  ......................... CADPDC1 test ObjectsReplicated

  From test: Replications

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = ForestDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = DomainDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Schema, CN = Configuration, DC = engineering, DC = com

  The replication generated an error (1727):

  The remote procedure call failed and did not execute.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:06.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Configuration, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:07.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  ......................... CADPDC1 failure test replications

  Beginning of the test: RidManager

  ......................... CADPDC1 failed test RidManager

  Commencement of the trial: Services

  ......................... CADPDC1 test passed Services

  Beginning of the test: SystemLog

  A warning event occurred.  Event ID: 0x000727A5

  Generated time: 27/06/2014-17:01:38

  The event string:

  The WinRM service is not listening to the WS-Management requests.

  A warning event occurred.  Event ID: 0 x 80050004

  Generated time: 27/06/2014-17:05:03

  The event string:

  HP 1 GB 2 332T adapter ports Ethernet: the network link is down.  Check that the network cable is connected correctly.

  A warning event occurred.  Event ID: 0xA004001B

  Generated time: 27/06/2014-17:05:06

  The event string: HP NC112T PCIe Gigabit Server Adapter

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was LDAP/cadpdc.engineer.com/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was ldap/cadpdc.engineer.com/*** address email is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:41

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was of cadpdc$. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:43

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was GC/cadpdc.engineer.com/engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0x000727AA

  Generated time: 27/06/2014-17:05:43

  The event string:

  The WinRM service could not create the following SPNS: WSMAN/CADPDC1.engineer.com; WSMAN/CADPDC1.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:55

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was cifs/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0 x 84350444

  Generated time: 27/06/2014-17:05:58

  The event string:

  Information System Officer: health: Post errors have been detected.  One or more errors of Power-On-Self-Test were detected when the server starts.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was E3514235-4B06-11D1-AB04-00C04FC2DCD2/5122bd13-c8ac-4265-a879-3a6831224994/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was ldap/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000410B

  Generated time: 27/06/2014-17:05:59

  The event string:

  The request for a new account identifier pool failed. The operation will be retried until the request succeeds. The error is

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:06:07

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:06:30

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041D

  Generated time: 2014/06/27 17:07:07

  The event string:

  The processing of Group Policy failed. Windows could not resolve the user name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:11:32

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:16:33

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:16:38

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/5122bd13-c8ac-4265-a879-3a6831224994._msdcs.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:21:35

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  ......................... CADPDC1 failed test SystemLog

  Commencement of the trial: VerifyReferences

  ......................... CADPDC1 test VerifyReferences

  Running partition tests: ForestDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... ForestDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... ForestDnsZones passed test

  CrossRefValidation

  Running partition tests: DomainDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... DomainDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... DomainDnsZones passed test

  CrossRefValidation

  Running partition tests: schema

  Beginning of the test: CheckSDRefDom

  ......................... Schema passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Schema passed test CrossRefValidation

  Running partition tests: Configuration

  Beginning of the test: CheckSDRefDom

  ......................... Configuration test past CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Configuration test past CrossRefValidation

  Running partition tests: engineer

  Beginning of the test: CheckSDRefDom

  ... engineer passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ... engineer passed test CrossRefValidation

  Running tests of the company: engineer.com

  Commencement of the trial: LocatorCheck

  ... engineer.com passed test LocatorCheck

  Commencement of the trial: cross-site

  ... engineer.com passed test intersite

  Hi Chamarasi,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• How to migrate Windows 2003 R2 to windows server 2012

  I am tired of doing the Migration of Windows 2003 R2 to Windows server 2012, but there are some documents are only available in windows net Tech, I installed the migration on Source and destination server tools and its seat, but I don't know how to transfer roles from 2003 to 2012.

  If a know the steps please please let me know.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows 2003/2008 server Enterprise Edition 32-bit RAM OS compatibility issue.

  We just bought 2 servers architecture 64-bit with 16 GB RAM on each server blades. seller want to install windows server 2003/2008 Enterprise Edition 32 bit OS on these because of the compatibility of the applications server computers. I heard that windows 2003 32-bit server supported only 4 GB of RAM. So, in this scenario, another 12 GB of RAM will be unusable or full 16 GB of RAM will rely on this machine so install us windows 2003/2008 server enterprise R2 32 OSi. Also say us no other solution.

  Hello

  Your question of Windows 2003/2008 Server suitable for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• Is it possible to upgrade Windows professional XP 2002 SP3 of Windows 2003 Standard R2?

  We have an old computer with Windows XP Pro 2002 SP3 server is installed.  There is also other software that we need on this issue to run new software, we want to install, but the new software is only compatible with Windows 2003 Standard R2.  So is it possible to XP to Windows 2003 Standard R2 level so that the settings and software on it are left alone - as it is with the Windows Vista upgrade to Windows 7?

  Thank you!
  Jon

  No, there is no path not upgrading to this version of Windows XP Professional.  You will need to do a clean install, which of course would not preserve your settings and/or other software.

• Windows 2003 installation switches DRAC4 / I

  Hello.

  I want to just install Windows 2003 Std R2 Sp2 to PE 1850 DRAC 4 / i media distance characteristic. For some reason, the Setup program fails.

  I have connected the virtual media to the Windows Server 2003 iso image, I start PE 1850 from this image and start the installation of Windows. party mode (IE on a blue background) text succeeds. I can create partitions and the file copy starts and goes without errors. Now, if the new server restarts, GUI-mode Setup starts and stops with the error - "install could not access the files needed to continue. This can be caused by an error on the CD or CD media is no longer present in the drive. ' Pressing 'Retry' bombs back and pressing "Cancel" shows following error message - "an error was encountered which prevents the installation to continue. The internal structures of configuration data is corrupted (phase 0). Press OK to view the Setup logs files. »

  Virtula media is always connected. DRAC firmware is 1.61 (later).

  It is possible at all? is - that someone has installed Windows server 2003 in this way?

  Andres P

  I found the solution - turn off the built-in CD device. Seems like windows Search installation only the first device.

• Need help for JO HP 8500 all in one printer on home network OS Windows 2003 server a.

  I have a new HP OJ 8500 has everything in a printer connected wireless to my local network.  I have internet access using the printer, can access the printer using a wireless iPod and can see the printer on the Modem / Router using Windows Explorer using the computer with the Windows 2003 Server operating system.  However, I can't access the printer using "Add a printer" in Server 2003.  In addition, the disc that came with the printer does not load printer installation information.  The message was "printer not supported using this operating system.  Help will be greatly appreciated!

  Hi mwcuff,

  There is no driver for Win Server 2003. The only thing I can suggest is to make an addition, a printer and refer them to the CD that came with the printer to see if it will load a basic driver.

• Problems adding a hard drive to a Windows 2003 client

  I am trying to add a hard drive to a guest VM on a host running ESXi 4.1.0 standard. It is a historical system that we must keep and maintain for another 1 & 1/2 years. There are 15 comments on this host.  The local database has 1.63 TB of storage with 868,85 Go free. All comments thick supply usage.

  The prompt, I work with is a Windows 2003 R2, 32-bit, Service Pack 2, Standard Edition.  Currently, I have two drives C: = 80 GB, & E: = 20 GB. I am trying to add a third hard drive of 300 GB.  When I try to add the 300 GB drive, I get the following error message. "Disk capacity was not properly formatted or was out of reach.  It has been replaced by the nearest acceptable value. " Value, it is replaced by what is 256 GB.

  I used the same Windows operating system to create three other similar servers with the largest hard drive = 100 GB C:, E: = 100 GB, & F: = 1.5 to.  Microsoft's web site, said that this operating system can handle 2 TB of storage.  The only difference with the other hosts three, that's they run vSphere 5.5.

  The size of the block of your VMFS datastore is the limiting factor, the bottom suggest that your datastore to VMFS-3 has been configured with 1 MB block size where the maximum virtual hard disk and the file size would be 256Go.

  See below for the limits provided by VMFS-2 and VMFS-3 block sizes.

  Block size	Large virtual disk on VMFS-2	Large virtual disk on VMFS-3
  1 MB	456 GB	256 GB *.
  2 MB	912 GB	512 GB *.
  4 MB	1.78 TB	1 TB
  8 MB	2 TB	2 TB minus 512 B *.

• P2v Windows 2003 Server

  I have a Windows 2003 Server physical that we would like P2v, but drive C has only about 100 MB remaining.  Drive D has 25 GB.    My preference is to install Converster on this server and run locally, but as the C drive is low on space, it may be better to do it remotely.   However, I was wondering if there is a way to always run locally if I install the converter on the D drive.  Is this possible?

  With only 100 MB on the left, I highly recommend you free disk space before you do anything else to avoid problems (not only related to the converter). What I did in the past in such situations, is to configure the location of the page file to the server, which will release usually a few GB (depending on its current size).

  André