Only a quick report as starting value value - calculate the end value

Similar Questions

• Use the project start Date and duration to calculate the end Date of project

  I'm trying to calculate the end date of the project in a report using the project end Date and time entered on the opportunity.
  For example, if the start date of the project filled an opportunity is 31/01/2009 and the length (integer) is entered on the opportunity is 5, the project end date is in the report must be 30/06/2009.
  
  I'm trying to TIMESTAMPADD forumaul allows you to add the duration (number of months) to the project start date
  This Fx works TIMESTAMPADD (SQL_TSI_MONTH, 12, '-used Custom Attributes ".) DATE_40)
  But if I try to replace the number twelve by the length (integer field) I get an error when you try to save: TIMESTAMPADD (SQL_TSI_MONTH, "-opportunity Custom Metrics".) S_INT_0, '-used custom attributes. DATE_40)
  
  Any ideas on how I can get this to work would be greatly appreciated.

  Hi, try this. It might solve your prioblem TIMESTAMPADD (SQL_TSI_MONTH, CAST (YOUR FIELD AS INTEGER), account. (' "Last modified")

  -John CRMIT

• What is the value of the start date, date in the end QueryAvailablePerfMetric method?

  The method QueryAvailablePerfMetric in the Performance Manager management entity has optional intervalId beginTime, endTime parameters.

  What is the difference in values returned by this method when the start and end dates are excluded?

  In my case, I see the same data.

  Because I do not think that same intervalId can we have different PerfMetricIds in a VMWare host, or is it not true?

  In the case of unmanaged ESX systems are provided only on statistics in real time for the current day.

  Statistics of sending hosts the vCenter Server system managing managed. The vCenter Server gathers statistics

  data performance of all systems ESX/ESXi that it manages and stores the information in its database, which constitute historical data.

  On the specification of begineTime and end in the spec would ensure only the metrics available in the specified period are gathered, if it makes a request for historical measures. These parameters will be not applicable for statistics in real time.

• How to ensure the backup of Windows 7 starts and runs until the end on a laptop which is mode standby, or could be put in mode 'sleep' when the lid is closed.

  Hello

  Many of us with laptops with Windows 7 would like to ensure that, when a Windows backup is scheduled, it starts successfully and goes to full completion, regardless of whether the phone is first 'sleep', or if the user of the laptop close the lid of the laptop, which would normally the laptop mode 'sleep'.  In other words, how to backup Windows or Windows 7 be configured to wake from mode "sleep" and prevent it from sleep mode, when a backup is scheduled and actively running?

  I saw a way to schedule a task that will wake the computer, but I'm looking for something more intelligent than that.  I'm looking to see if Microsoft has already thought this through and allow you to pre-configure operating system such as we have no additional installation software.

  Thank you

  Dave

  We continued this thread in http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/how-do-i-keep-windows-7-from-sleeping-in-the/9602fbe6-f9d2-461d-88ee-710369e6f543

• TestStand report indicates a value of passage as a failure

  I came across a possible bug I want to put some feed on.  Attached is a sequence and VI that when run in test USE of all other iterations for the step values (i.e. next USE) the result will be maintained from the last USE and it will appear in the report. The ITI is a version of stripped-down-to-nothing of the test sequence acutal on soil with tricks to simulate error.

  Step has the mistake of ignoring and this situation occurs when an error occurs, but I do not expect the previous test result value is displayed.  Run the sequence and see what I mean.  It generated a report that puts my workshop on the issue of the stability of the TS.

  PS. LV 8.5 TS 4.0

  

  Paul-

  The reason are getting failed with a measure of the last good USE is due to many issues of compounding. The sequence is the default setting "Optimize not reentrant calls to this sequence", which essentially tells TestStand to cache a copy of the duration of the procedure described in this sequence to improve performance for each subsequent call to the sequence. So the value of Step.Result.Numeric will not only be maintained whenever you call the step proceeding of the sequence, but now also sequential calls. Then, note that the report shows that you had 10 iterations executed with 0 past and 0 failed. This means that you got errors on all iterations. Now, a step loop reuses the result of step that it executes each loop and the final result of synthesis is a snapshot of the latest iteration. Since you are ignorant mistakes, the numerical value of the result of step never gets updated, so the result of the final summary step is the same as the last object to be measured. The loop code then sets the State of the loop to fail because no iteration didn't.

  Look at the report attached to illustrate the behavior. The report shows you the results of each iteration, as well as the summary of parent result.

  Ignore the errors in general is a bad idea, but assuming you want to continue to ignore the errors, do one of the following in the order or ease and better behaviors:

  (1) add a preexpression to assign a default value, such as zero or NAN Step.Result.Numeric
  (2) uncheck the setting "optimize not reentrant call to this sequence", so that the default value of zero will be used for Step.Result.Numeric
  (3) add another step after that you use to see if at least one iteration success or failure.

• Win 10, PS CC and problems Wacom Bamboo (sliding opacity, brush jumps back to start value)

  I have just updated to Windows 10 and I'm generally pretty happy with it. BUT - I have a weird problem in Photoshop CC (last updated).

  I use a Wacom Bamboo Fun. If I try to change the opacity of a layer, or change the size of the brush (the sliding function) the value changes to the starting value. This only happens if I try to make a change less than 10%, for example: 100% to 98%, or 92%. And this only happens when I use the tablet.

  If I use the mouse, it works fine.

  I have already reset the preference file photoshop and reinstalled the driver for wacom.

  Any ideas?

  Thank you!
  Sandra

  Hi eerie

  Please refer tablet support for Photoshop on Windows 8. Did you activate the pen pressure?

  We must also look to flow from the pen

  See this thread How do you clear the pressure of the stylus? to reduce the sensitivity of the pen

  Concerning

  Assani

• report form, where certain elements of the form received values.

  Hi, Hello:
  
  I have a question that maybe stupid, but boring for me. I need to provide a report form, where certain elements of the form have been given values automatically, and these elements (display only) are supposed to show some values in the form automatically.
  
  I used the shape of the APEX with report. The update and delete worked well. But I can't display the automatic values when inserting. By default, APEX insert form makes each null element. I tried to give the value of two items: P5212_USERKEY, P5212_DAILY_VER_DATE with the process before header, after the header, after regions and footer and of calculation or in values of these two elements of the branch if user hit create button (submit). It never worked the two elements always display null value and when I load, I got "ORA-01400: cannot insert NULL into ("TBSBI".» "" "DAILYVERPRODNOTE '." " TAKE') ", because I put in place the constraint in the database that these two columns should not be null.
  
  Could anyone help on this? any suggestion would be appreciated.
  
  Sam

  If you have performed these 'Display' values only they can by default does not save session state. To access the elements of the page always returns null. Have you changed the "Save Session State" option to "Yes"?

• Create null values in the database for interactive report link column values

  Hello
  
  I'm pretty new to APEX and tries to create an interactive report with the form. This report examines essentially for more information for a particular employee. If the employee has any information in the table, the report presents information with a button change beside him. If there is no record in the table for this employee, a create button appears. Now when you click create, a new creation page. This page contains the employee number as a single display field with the value from the previous page. This value is displayed in the page, but it is not in the database. Create the page has view-only number and a couple of other columns. The other columns get inserted into the table with an empty number!
  
  Can someone please? Looks like the page keeps the value zero for the number of the employee who came during the search of the interactive report. Hope I made myself clear, being the newbie hope I haven't used any incorrect terminology.
  
  Thank you!
  Robet

  Without the DB column, apex will not determine which DB column the data in this field are mapped to (it would be quite impossible to guess the destination since the name of the element column).

  If you want to assign to the previous element of the page, use the default section

  return: P1_EMP_NUM

  By default the value Type: body of the PLSQL function

  and configure the attributes of source as I said before

• How to avoid the report for all values of roller running upward of guided navigation

  Hello
  
  Thanks in advance
  
  I have 3 reports on three different pages of a dashboard. (Set up a navigation guided on a column of each report). When I click on the value of the column of guided navigation lead me to report 2 for this particular value (is invited), similarly for 3 report also so far it works great.
  
  However when I go back to report 3 2 and 2-1, the reports are run for all the values for the value which has been adopted by the guided navigation of the previous report (on which I clicked to go to the next report of value) instead.
  
  Published by: 808623 on November 9, 2010 02:10

  Use the ' back ' button.

  Otherwise, history.back(-1) it will take you to the session previous search in Google to get the HTML code and place it in object HTML/text at the bottom of each page of dashboard

  which will restore the last session he values he's running not not all previous values

  Thank you
  Saichand.v

• Problem with com.apple.csrutil.report.plist start Daemon

  In etrecheck market, I get:

  Launch system demons: (Does that mean?)

  [failure] com.apple.csrutil.report.plist [click for more information]

  Details:

  (com.apple.csrutil.report.plist [9006]): abnormal code: 71

  What is it and should I be worried?

  Hello todivefor,

  I thank first, by clicking on the "Click for details" link. Few people ever do and I never understood why. Unfortunately, EtreCheck reports just what he finds. Apple says rarely someone what do these internal codes. In this case, "click for details" did not reveal much.

  Is there a specific problem that caused you to start EtreCheck? Any individual in EtreCheck maybe line not a lot of sense. But, taken together, all the lines can tell a story. I suggest to always display the full report EtreCheck. Each section has the value.

• Calculate the average value

  the data that I measured changed quickly, so I want to get the average value of the data

  Don't tell me to use mean.vi, I already know.

  and I got an idea that is to add data in a table every time, then the sum of all value data and take the line of result by the number of items

  but I don't know how to do this, anyone can build a simple vi to show me? Thank you

  I enclose my vi that uses mean.vi to the average value of calc, you can remove it and help in your path, thank you!

  Do not add your data in a table that grows forever. What a waste of RAM. To calculate the average, you only need to sum and N.

  Here is a simple code to accumulate the sum of the values in a shift register and divide by the number of add operations.

  

• 4.2 - column link works only with interactive report (IR)

  Greetings-
  
  I have a screen with an interactive report (IR) and a tabular report on it. There is a radio button used to switch between them, of course, both of them have conditional logic based on this button. If the tabular report is the default value, everything works fine. If the interactive report is the default, then the 'link' on the IR used to display single details comes in white.
  
  Note that if the IR is by default, but you switch to tabular and then back to IR before trying to put in place the single record view, fine. It's almost as if something is not be instantiated unless the table view is loaded.
  
  The option button and the two reports are in the same region.
  
  Anyone has any idea on this?
  
  Thank you
  Scott
  
  Published by: DenverScott on April 30, 2013 09:14
  
  Published by: DenverScott on May 2, 2013 05:31

  OK, I looked inside. It is a common problem, but you have reached a particular example of this, because it seems that you need not the value of P2_REPORT_SELECTOR in your SQL for IR.
  BUT do you it because you have on your health.

  So, there are two simple ways to solve this problem. As I mentioned previously.
  1. you must fill in the field "Page elements must send" in the IR with P2_REPORT_SELECTOR
  I did it.
  What it does it does the value of P2_REPORT_SELECTOR available in persistent session state so that the AJAX call can seen that the condition is met and that the report should be displayed/rendering.

  2. the other option is a calculation on P2_REPORT_SELECTOR who rule on 1 when P2_REPORT_SELECTOR is set to null. I left this calculation, but it set to never right now. It's the same effect net because calculations save values to persistent session state.

  Without the value of P2_REPORT_SELECTOR to persistent session state, the value is only in memory during rendering. That's why the page renders correctly. BUT so that the report to switch to the display of the page one needs to know the value of P2_REPORT_SELECTOR and the value was NOT in permanent session state, therefore not available for the AJAX call, which updates the State.
  Same thing when VC has been sent, it saves the value of P2_REPORT_SELECTOR in persistent session state. Same as switching the button radio.

  I hope this help out you.
  -Jorge

• I want to add values from the individual at the end of an existing channel

  I have a program the calulates several values of my data and you want to write each one sequentialy in a new way that I created.  How to assign a value to the end of a string?

  Option Explicit
  
  protected chObj: set chObj = data. Root.ChannelGroups.Add ("Target"). Channels.Add ("Target", DataTypeChnFloat64)
  
  «OPTIONAL: channel automatically.» In this place it is possible to book before the start of the speed
  
  chObj.ReservedSize = 1000
  Call AppendValue (chObj, 1.0)
  
  Call AppendValue (chObj, 2.0)
  
  Call AppendValue (chObj, 3.0)
  
  Call AppendValue (chObj, 4.0)
  
  Call AppendValue (chObj, 5.0)
  Void AppendValue (chObj, newVal)
  
    chObj.Values (chObj.Size + 1) = newVal
  
  End Sub

  Channel grows automatically. Remember that it might be useful to use the ReservedSize property if you can assume that the channel will be how long.

• Text added in loop file adds the value of delimiter unwanted at the end of each iteration.

  I use 'Export to Spreadsheet.vi' in a loop that records a text file and adds data to a waveform table 1 d for each iteration. My problem is that, at the end of each iteration of what an extra delimiter value is added to the file. When I then try to graph my data, I get the holes, as shown below (circled in black).

  

  When I start to analyze the data, I'm sure it will be a nuisance. I can't find a solution to this problem. Any advice would be greatly appreciated.

  Thank you.

  Any wire TRUE here

  

• How can I get only a few things that start on my computer instead of all sorts of things at once

  How can I get only a few things that start on my computer instead of all sorts of things at once

  Hello

  You can use these to control which startup programs. Many others who settle start-up are not
  really need to be there. As Acrobat Reader (Adobe), Agent of WinAmp and many others who
  load chunks of themselves to start more quickly (not a problem on the machines of today ' hui) and to make sure that they
  can control the files they support (to be sure that you continue to use only). Those who are not common
  examples and not meant as a slam on these programs very well.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  -------------------------------------------------------------------------

  Performance and maintenance tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">