Problem with com.apple.csrutil.report.plist start Daemon

Similar Questions

• I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.

• I have problem with my Apple Watch, during the step count of the market does not appear on the watch?

  I have a problem with my Apple Watch, when I use the watch on my treadmill, keep the phone, the number of step does not appear, the whole market is a waste if it shows only not on Apple Watch, how to solve this problem?

  Hi Shabbir

  Apple Watch has two integrated health and fitness apps: enforcement activity and the application of the workout. For best results, make sure your arms naturally swings while walking on the treadmill, as Apple Watch uses movement of arm (measured by the built-in accelerometer) to track and evaluate movement for indoor activities. If you use the application of the training session, your watch will also measure your heart rate continuously for training in order to estimate the calories burned.

  Check that you have configured the application of the activity:

  -Press the rings activity on your watch dial or open the application for the activity (if you have not set it upwards, you will be prompted to answer a few questions).

  Also, make sure that the fitness of tracking is enabled:

  -On your iPhone, in the application of Eve, go to: Watch My > privacy > Motion & Fitness > fitness monitoring.

  You can improve the accuracy of the estimates related to activity in calibrating Apple Watch (take your iPhone with you on walks outdoors or tracks, connected to your Apple Watch and with location enabled Services - see the detailed instructions in the article to support below).

  More information:

  http://www.Apple.com/watch/health-and-fitness/

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Hello

  If you have not already done so, it can also help update your Apple Watch to the latest version of the software:

  Update the software on your Apple Watch - Apple Support

• I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.

• Problem with the Apple start and stop music

  s everyone having problems with Apple music constantly stop and start today?  It is on my PC and iPhone.

  What is your internet connection?

  Apple's music is a streaming service, so unless you download the files on the device, you can find that the network has a great impact on read performance.

  See if others agree there could be problems at the end of Apple, but the status page of the system does not recognize the defects of these last...

  https://www.Apple.com/support/SystemStatus/

• problem with the ghostery Setup Wizard - it starts every time

  The ghostery Setup Wizard starts each time I start firefox android. Each time, I manually close all my tabs, but they are all jut come immediately again when I restart firefox.
  I don't have this problem with my desktop, Win XP. I also ghostery ext on my XP with no problem.
  I ONLY WANT A FIREFOX PAGE WHITE when I start!
  Thank you!

  LeGregox: I'm sorry, but I do not understand your question.

  Maybe you should ask people Ghostery support?

  https://getsatisfaction.com/Ghostery

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• Sudden problems with Airplay, Apple TV etc with WAG320N

  Hi all

  Until recently I use DSL through my WAG320N and it worked perfectly. I used my AppleTV with airplay, Vuze, Xbox and so on without problem. I just moved to a new address with internet fiber. I've reconfigured the router for all route (and not an ADSL modem) by assigning the first to act as a WAN port ethernet port. Internet works fine as speed goes, but the wireless LAN is not optimal. I can't get my AppleTV to find iTunes on my laptop and Airplay is very slow and laggy. The router settings remained unchanged at first, but now I tried to reset to the factory settings and start over, this does not solve the problem however. I'm a bit puzled on this, as I know, the change of service provider (and go from ADSL to the fiber) should not have effects on the local network? I noticed that Vuze complains about problems NAT (just need to confirm that there is a NAT problem), but this should not matter in which of the local network, right?

  Any ideas what the problem might be?

  These devices are mentioned connected wireless? This could be a problem with wireless. It may be because of the interference. It is possible that in the new location, you have two or three neighbors who affects the Wi - Fi wireless signal. It is also possible that some other wireless devices are causing interference like cordless phones that moving on the same frequency with the router, the garage door openers and microwave machines. What you can do to prevent the interference must reconfigure wireless settings. Set width/bandwidth of 20 MHz channel and set the standard channel 1, 6 or 11. That should help him.

• Problem with the Apple Core Image?

  Can someone confirm for me that there is a problem with Apple Core Image which has feature to DNG. I have problems with Nikon RAWs converted with DNG Converter. Once changes have been made to these DNG (in Lightroom 2.3) and the metadata and previews updated software (Preview, etc.) based on the main Image don't seem to use the embedded JPG (with applied adjsutments) but well the smallest thumbview, not up-to-date. I do not use the option "convert to linear" when converting.

  >... but Apple OS uses its own rendering system (part of Mac OS) to display

  > previews in Finder. It is completely independent of the melting of LR,

  > or LR of embedded previews.

  Hi Eric - so a software program that uses Apple CoreImage to render a LR

  "adjusted" DNG will be or does not display a picture of the DNG that has been

  cropped.

  Will not. In general, LR settings (e.g., cultures, fill light, etc.) are not

  applied by Core Image. These types of adjustments are specific to each flood

  converter.

  Eric

• Problem with cgicmd.dat in reports 10g

  Dear Sir/Mam,
  
  I configured serve report on solaris 10. When running reports using web url with key mapping in the cgicmd.dat folder, I get a very strange problem. Regardless of settings m passing reports through a web url an additional "=" character is added automatically. I give you the details of the files below. Please help me. Thanks in advance.
  
  The content of rwservlet.properties: -.
  
  SERVER_IN_PROCESS = YES
  RELOAD_KEYMAP = YES
  DIAGNOSIS = YES
  TRACEOPTS = TRACE_ALL
  TRACEFILE = rwservlet.trc
  FIND = TRACE_REPLACE
  SERVER = test
  #IMAGEURL = http: / / < web_server_name >: < port_num > rwservlet/reports /.
  KEYMAPFILE = cgicmd.dat
  #DBAUTH = RWDBAUTH. HTM
  #SYSAUTH = RWSYSAUTH. HTM
  #ERRORTEMPLATE = RWERROR. HTM
  #COOKIEEXPIRE = 30
  ENCRYPTIONKEY = reports9i
  #DIAGBODYTAGS = < reports_servlet_help_file_title >
  #DIAGHEADTAGS = < reports_servlet_help_file_body_tag >
  #HELPURL = < url_of_customized_help_file_for_reports_servlet >
  #SINGLESIGNON = YES
  OID_ENTITY = % REPORTS_OID_ENTITY %
  #ALLOWHTMLTAGS = NO
  #REPORTS_NETWORK_CONFIG = rwnetwork.conf
  #OIDCON_INIT = 10
  #OIDCON_INCREMENT = 10
  #OIDCON_TIMEOUT = 0
  DEFAULTCHARSET = JA16EUC
  #DEFAULTCHARSET = EUC - JP
  
  The content of cgicmd.dat: -.
  
  osk47zgenp: report = 1% userid=utimainapp/utimainapp@testdb rundebug no = NO delimited = destype = cache mode desformat = bitmap mast_ext = roymask.xls p_start_dt = p_end_dt % %2 = 3 p_srvc_id = 4% p_sch_id = 5 p_agnt_cd = 6% p_user_id = %7 = 8% p_sesn_id %
  
  
  Reports URL is: -.
  
  http://10.10.100.110:8890/reports/rwservlet?osk47zgenp+rp_os424_mat_recon.RDF+30-Jun-2009+01-Jan-2010++31++Shashi+1492544
  
  Error coming on the browser: -.
  
  REP-110: file 'rp_os424_mat_recon.rdf =' not found.
  REP-0110: cannot open the file 'rp_os424_mat_recon.rdf ='.
  
  The content of rwservlet.trc: -.
  
  [2011/1/19 7:37:1:624] (RWClient:doGet) enter...
  From [7:37:1:625 1/19/2011] bug 50103 (RWClient:doGet): QueryString: osk47zgenp + rp_os424_mat_recon.rdf + 30-JUN-2009 + 01 - JAN-2010 ++ 31 +
  Shashi1492544
  [2011/1/19 7:37:1:625] 50103 (RWClient:processRequest) Info: recharge the key mapping file: s_reloadKeyMap: YES
  From [7:37:1:626 1/19/2011] bug 50103 (KeyEntry:replaceParams): report = rp_os424_mat_recon.rdf = userid=utimainapp@testdb rundebug = N
  O desformat = delimited destype = mode cache = bitmap mast_ext = roymask.xls p_start_dt = 30 June 2009 = p_end_dt = = p_srvc_id = 31 = January 1, 2010
  shashi = p_agnt_cd = 1492544 = p_sch_id = p_user_id = p_sesn_id =
  From [7:37:1:626 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:626 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  [2011/1/19 7:37:1:627] 50103 (RWClientUtility:findServer) Info: Failed to connect to the server: test
  [2011/1/19 7:37:1:627] 50103 (RWClient:startInProcessServer) WARNING: start the test server inprocess
  From [7:37:1:657 1/19/2011] bug 50103 (NetworkUtility:getIOR): find a server and returning the IOR
  From [7:37:1:658 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:659 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:660 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:660 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:660 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:661 1/19/2011] bug 50103 (AuthManager:getAuthId): secure server: false
  From [7:37:1:663 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:664 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:664 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:665 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:666 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:666 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  From [7:37:1:667 1/19/2011] bug 50103 (RWClient:runReport): cmdline: p_end_dt = January 1, 2010 = baseUrl = http://10.10.100.110:8890 / report
  s/rwservlet/GetFile/userid=utimainapp@testdb USER_AGENT = "Mozilla/4.0 (compatible;". MSIE 7.0; Windows NT 5.1; (Trident/4.0) ' p_srv
  C_ID = 31 = 10.10.100.110 SERVER_NAME = jobname = "rp_os424_mat_recon.rdf =' p_sesn_id = mast_ext = roymask.xls getFilestr = / not > imagekey = re"
  ports9i p_user_id = REMOTE_ADDR = 10.10.105.54 SERVER_PROTOCOL = HTTP/1.1 authid = RWUser = 30 June 2009 = mode p_start_dt = bitmap REMOTE_HO
  ST = 10.10.105.54 destype = cache SERVER_PORT = 8890 = shashi report = p_sch_id = "rp_os424_mat_recon.rdf =" expiredays = 0 ACCEPT_LANGUAGE = en
  -We desformat delimited = p_agnt_cd = 1492544 = rundebug = / rwservlet SCRIPT_NAME = NO
  From [7:37:1:668 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:669 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:669 1/19/2011] bug 50103 (ReportRunner:connectToServer): new connection request for userid: RWUser server: test
  From [7:37:1:673 1/19/2011] bug 50103 (ReportRunner:connectToServer): successful user connection: RWUser server: test
  [2011/1/19 7:37:1:709] 51022 (ReportRunner:Release) Info: Connection object has been released.
  [2011/1/19 7:37:1:711] Exception (110): File 'rp_os424_mat_recon.rdf =' could not be found.
  REP-0110: cannot open the file 'rp_os424_mat_recon.rdf ='.
  
  oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
  at oracle.reports.RWExceptionHelper.read(RWExceptionHelper.java:67)
  at oracle.reports.server._ConnectionStub.runJob(_ConnectionStub.java:504)
  at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:288)
  at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
  at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1671)
  at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1525)
  at oracle.reports.rwclient.RWClient.doGet(RWClient.java:366)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  at oracle.security.jazn.oc4j.JAZNFilter.doFilter (unknown Source)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
  at java.lang.Thread.run(Thread.java:534)
  
  From [7:37:1:711 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:711 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  From [7:37:1:716 1/19/2011] bug 50103 (RWClientUtility:isStatusFormat): statusformat: null
  From [7:37:1:717 1/19/2011] bug 50103 (RWClientUtility:isStatusFormat): statusformat: null
  [2011/1/19 7:37:1:717] (RWClient:doGet)... .exit

  Hello

  The document 341188.1 is available on http://support.oracle.com

  The problem is a bug fixed in the version of Group of patches 2 rel 2 reports 10g (10.1.2.2.0)

  Concerning

• problem with the apple ID

  I was owner of iphone 4s, just recently, were switched to iphone (my wife's iphone) 5s. Was eliminated all the information of the 5s, using the settings (you know what I mean), wiped everything away from him. So, theoretically, there is a new white 5 s. iphone I restored my 4S backup on it and for a while, everything was ok. But yesterday a strange thing happened. When I tried to update the 3 apps of mine (that I bought for my apple ID), app store requires a password for my wife's apple id.

  My wife had this iphone 5S for a while. Initially, she had a name of apple ID, either a**@*.com, and then rename it to 1**@*.com. She had updated information for its parameters concerning this change.

  But here I am with this iphone 5s, where my info and id are given for all (AppStore, itunes, icloud), I downloaded several apps using my id after all this restore process. AppStore asked for the password to my id I typed in. But it required a password of his apple a**@*.com (which already no longer exists) ID out of the blue.

  I also spent a half hour with the support of apple on the phone, and the specialist in a first time tried to make sure that I use purchased apps form sound apple ID, which is not. When I came to understand the problem, he was surprised to say that couldn't happen.

  The fact is that I solved the problem by removing the 3 apps and reinstalled them. I'm waiting for the problem to occur again (but hopefully not) with some other app update.

  That's what I don't understand. How is it an existing id not popped up for the apps I bought. Maybe someone has stumbled on this?

  When restore you the phone of an iTunes backup or a backup of iCloud?

  A restore iTunes picks up the apps (and other store downloads) of this iTunes library. If that's where you restored then what this id with these three applications in the My Apps from the iTunes library section: select/highlight one of the applications and do "get info" (control-I on a PC; order - I have a Mac) and tab file on the popup should display owner id.

• I have problems with Microsoft 6to4 adapt reports tv_configmgrerr31 and also microsoft PS/2 mouse bring tv _ configmgrerr24

  Workin

  Symptom:	Device is not working properly. Windows cannot load the required device drivers.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, the Microsoft 6to4 map, reports "tv_ConfigMgrErr31". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\ * 6TO4MP\0004.
  Resolution:	1. check that the correct driver is installed.
  2. try updating the drivers using Windows Update.
  3. check with the manufacturer for an updated driver.
  4. try to uninstall and reinstall the device using Device Manager.
  Partners:	Explanation of generated by Device Manager Error Codes
  Manage devices in Windows
  Symptom:	Device is not present, not working not properly, or does not all its drivers installed.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, Microsoft PS/2 mouse, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ACPI\PNP0F03\4-14DDEF44-0.
  Resolution:	1. check that the correct driver is installed.
  2. try updating the drivers using Windows Update.
  3. check with the manufacturer for an updated driver.
  4. try to uninstall and reinstall the device using Device Manager.
  Partners:	Explanation of generated by Device Manager Error Codes
  Manage devices in Windows

  Hello

  This error may occur if one or more of the following conditions are met:

  (a) there is a hardware problem or a new driver might be needed.

  (b) devices remain in this State if they have been prepared for removal. After you remove the device, this error disappears.

  Step 1: If the device does not work, make sure that the device is properly connected to your computer. For example, make sure that all cables are correctly installed, or that the cards are properly housed in their locations.

  Step 2: Run the following Microsoft Fix it.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• In case of problem with my Apple Watch.

  How to activate my Apple Watch? Won't turn on, won't charge. What can I do?

  * it turn off by itself starts again.

  * I try to reactivate it on the right button (Nothing)

  * I try to load it (Nothing) was hot...

  * change of cables (Nothing)

  Apple Watch 2.2

  Hello

  Try charging your watch about 2.5 hours. When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  It is normal that for watching, adapter sector and charging cable become hot when it is connected to the power.

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support