Only upon restart, not when you turn it on: «No valid OS»

Similar Questions

• Unable to set usage, only allowed 1%. When you click OK ' could not ask for the parameters for the reason next 0x8007007b '.

  Windows 7 Home Premium (64-bit) Service Pack one.  Unable to set usage, only allowed 1%. When you click OK or apply. Get error message» Could not apply the settings for the following reason: the syntax of label file name, directory or volume is incorrect (0x8007007b).

  Original title: System Restore

  Hello

  You did changes to the computer, before the show?

  The error 0x8007007B occurs when the system is configured to store the restore on a wrong path or location points

  Follow these steps and check.

  a. click Start, type sysdm.cpl and press enter.

  b. click on the System Protection tab.

  c. automatic restore points, deselect any location invalid or duplicate.

  d. click on check the C: drive with the Windows Logo.

  e. click apply , and then click on Ok.

• Satellite A300 starts sometimes like when you turn it on

  Hey people,

  So my sisters laptop (satellite A300) was more than heating for basically since we bought it, but now I think that has caused a serious problem.
  Now it does not start at times like when you turn the backlight only market not even turn on.

  Hard drive does nothing basically nothing just the power light comes on it is all.
  But when I remove the charger and close the lid and open it again, wait like 2 minutes it magicly towers, so it's the startup problem.

  This may have something to do with it, but when you plug the cable that the tactile area (above the keyboard) lights up if laptops or disable but don't market not turn on if not plugged Chargers... also touch dosen't work area.

  So many things hope you understand all this, thank you!

  Hello

  I think that this is related to the problem of equipment; Maybe this problem of motherboard or power suply electronics problem.
  But that's just a guess and no one here will be able to say what's going wrong with your laptop until it has been checked by a technician.

  That's why I put t think you could solve this problem, install the new OS or new BIOS.
  I therefore recommend to request a laptop technician help and equipment to check.

• Satellite Pro L500 stuck when you turn it on and got the loud noise

  I use Toshiba for a long time, this is my 3rd Toshiba laptop (I bought it in June 2010), today I bought the helmet, when I plugged it in, it did not work. (When I talk with my friend through sky, I use the laptop speaker instead) Then my friend got me to download a driver for the sound.

  After the download, the helmet worked perfectly. BUT the speaker on the laptop did not work. Then I restarted computer again and this time when you turn on, it's stuck. stop boot on Toshiba logo later process, there are peep sound (not speaker, he is very strong), I can hear it from the inside. I can't do anything else, JUST close.

  Please help or advise where can I take my laptop to the service because I think that if people reply to my post and I don't know if I can fix it myself.

  I'm going overseas week next to the presentation and need to use the laptop. Do you think that if I take the laptop to the center of toshiba, they immediately understand problems? I am now using my old toshiba, and it is slow to make any presentation.

  Hey Buddy,

  You use normal headphones with headphone jack or USB?
  Headsets with headphones are usually easier handling in my opinion.

  In any case, at the time where your computer laptop doesn't boot and stuck on Toshiba logo, right?
  In this case, you must remove the battery and the AC adapter at a time and test it again.

  Check this box!

• Satellite A100 has sometimes unresponsive when you turn it on

  I have a computer laptop Satellite A100, Centrino Duo. Sometimes I have problem when you turn on the laptop. The computer stops responding while it is turned on and when I reboot without disk scan is started which is usual when windows does not start successfully.

  Sometimes the computer starts and I log in the system but then the screen turns white and even when no disk scan is started when I restart the system.

  Pls advise.

  Hello

  In my office, I have the Satellite A100-504 and so far, everything is OK. I didn t notice something similar to described issue. Have you noticed this problem since the first day?

  Can you please tell me what A100 you have exactly? Is - this WXP or Vista preinstalled laptop?

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Stor.e TV + loader error keeps coming up when you turn it on

  I experienced ongoing problems accessing the hard drive. Error message "No Loader" keeps coming up when you turn it on.

  The so-called 'solution' to this problem on this forum is to open the box and play with the cables. While I had some success with this method initially, disassembly of the box 10 times a week is not on.

  In desperation, I tried something else.
  When the message no. Loader is in place, I pass in the box and the new on the remote control.
  After 2 or 3 times, and then the folder of the HARD disk appears generally.

  I did that constantly now with great success. However, this suggests that the error no. Loader is NOT a mechanical connector with the hard drive problem, but (as usual) poor software (what else?).

  Dismantling of the unit is shut down for an extended period of time so may explain why this technique works.

  Put the unit on and off the power several times also solves the problem of file D are not on the network even if Win7 shows shop-TV-Plus as a mapped drive on NTFS (but can not find the file D).

  See the resemblance?

  Another thing that exacerbates the problems is poor ventilation of the device. The first thing that happens with this device, it's rubber feet sticky garbage fall.

  While this may seem trivial, the ventilation slots are under the device and will be blocked if he has no feet. I live in a hot country so this appliance gets very hot and behaves even more erratic, unless it is well ventilated.

  Ideally keep well away from other units and preferably sitting it on a small box in itself with the vents in many exposed.

  I always also have problems to read files FLAC, MKV. The unit sometimes lost synch with files FLAC which generally play OK and crashes or causes a large noise or white noise on the speakers (dangerous).

  Some just MKV files play quite although VLC reads. There are many other inconsistencies, but these are more boring.

  Everyone knows these problems or someone at - it other solutions for these problems?

  I don't think we can expect another software upgrade from Toshiba? Your dreams, pal.

  I m not Stor.E + owner and can not say much about the issues mentioned, but the first sounds of mentioned problem (error no. Loader") for me much more like a hardware problem as a software related issue.

  Files mkv seems to be supported.
  The mkv must be encoded in H.264 and MPEG-4 format
  This is what I found on a Web page.

  In addition, there seems to be an update of the firmware

  [3.5 inches StorE TV + ROM Image 2.12_UI1.0 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.

  Original title: unexpected reboot

  My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.
                                                                              
  Maybe the problem is related to this message in log file:
  SSD HDD access service-service & can not start due to the following error: the system cannot find the path given.
  Source: Service Control Manager

  I would be very grateful if you can help me.

  Hello

  Step 1: Use disable automatic restart on system failure option and check if you can find any error message. Previous post the error message complete and accurate which could help us help you better.

  Steps to select Disable automatic restart on system failure option:

  1. reboot the computer
  2 start typing the F8 key
  3. you get it anticipated the startup option window
  4. Select DisaDisable automatic restart in the event of system failure

  Step 2: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• audio source, but not when you drag on the timeline

  Hello

  I was just change some videos taken with a digital SLR, and the audio is in the source, but not when you're dragging to the timeline?

  I see there is an option to select drag video or audio only, but I can't select audio...

  No help with tis please...?

  Kind regards

  Sabine

  http://forums.Adobe.com/thread/1374590?TSTART=0

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• I remain unplugged for a long period of receipt message that dns does not when you use windows 7

  I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN

  Concerning

  NAWAB IKRAMULLAH KHAN

  Hello

  ·          When the issue started?

  Method 1:

  Run the Windows 7 network troubleshooting and check if it can automatically find the fault.

  For more information about how to run the network troubleshooter, check this link:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Get the network store event of Event Viewer logs.

  Check out this link on the event logs of the resolution of network problems.

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2:

  a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.

  b. at the command prompt, type the following command and press ENTER:

  ipconfig/flushdns (there is a space between ipconfig and /)

  It will show you the message successfully empty the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:

  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)

  e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

  g. If this is the case, try this:

  ·          enough ipconfig at the command prompt and press ENTER.

  ·          ipconfig / renew in the command prompt and press ENTER.

  h. test it again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

• Why have I not lack of photos in the collections. How can I sort this. It's so boring after a number of collections to find a lot of missing pictures when you turn on the computer again.

  Why do I get "missing photos" in the collections of bridge. and how to use them.   so boring after the construction of a few collections to find the photos missing when you restart the computer.

  Aare move you or rename the pictures or folders having a collection? Bridge is a file browser, not an asset manager, so everything you do have an impact on the file names and locations can invalidate the elements stored in a collection.

  Mike

• When you turn on Windows 7 laptop, get the error "Control deck is not responding.

  When I turn on my laptop with windows 7 Professional a white appearsk screan and error "the bridge of control not responding". Help, please!

  I found the solution of http://support.asus.com/Download.aspx?SLanguage=en&m=K52Jc download latest version of ControlDeck. It is an application of Asus which is the control of things like sound, brightness, contrast, etc. When I had to reinstall the app everything has been corrected.