Agilent 34970 has programming issues

Similar Questions

• Input buffer overflow Agilent 34970 has

  IM using Agilent 34970 A for a blood pressure purpose, Im getting error 521 and 103 when I select more than 15 channels.

  I understand that 521 error is an input buffer overflow error. IM using one of my own live measurements.

  I measured the 40 channels at once and I never had an error, but when I use the VI attached the error im.

  I reference some of the threads that deal with the same problem, I have not found a solution.

  Thank you

  Eureka

  Thanks for the reply... I thought about it... had to set the unit in XON/XOFF mode so that it retains the values of the power input channels. I did notice that I made the changes in the configuration, while I was doing someother changes...

  @margasan,

  The post that you directed me was one of my own messages... but thanks anyway...

  Thank you

  Eureka

• Open ERRO agilent 34970 has

  Hello, I am brand new to Labview, I use a 34970A agilent. (I'm french, sorry for my English).
  I made a small program with agilent drivers for temperatures and it works.

  I would now like to measure a voltage. I can read it directly on the Panel prior to the agilent, BUT when I try to read it with the labview with the function of monitor program, the front indicates that the channel is open, it is not that I could read 1 minute before the façade.

  I don't understand the problem because my program is very simple and excutable, there is no problem of communication between the computer and the agilent, so I wonder with the agilent says that the canal is open...?

  I'm sorry for the bad explanation, I hope your understand my pain, I you give some pictures to illustrate my purposes.

  Thank you very much in advance

  
  

• Agilent 34970 has with card 34903

  Hello

  We are able to close the first string on the map of 34903 switch but can't get other channels to close on this map.  We use labview 7.1, any suggestion is appreciated.

  Thank you

  Everett

  Hello and thanks for your quick responses.  I looked at my program of work colleagues and it was not defining the constant false to true to activate channels.  After that, the program works.

  Thanks again,

  Everett

• Can someone help me on action with agilent 34970-34901 has continious

  I need assistance with 34970-34910 has continious measurements. Everyone says that you need to configure "Agilent 34970 has advanced Scan.vi". I have modified this vi to measure temperature and pressure (current) but I could not go a sterp before measuring very. How can I do this? I have attached the vi that I modified.

  I solved the issue of measuring continuous with Agilent 34970-34901 has. All my error is in the configuration of the usb serial port. To the continuous measurement, the flow of control of the usb serial port configuration must be implemented as 'XON/OFF' and the same setting should be made in the vi. You could measure temperature/voltage/current at the same time by doing this.

• manage requests between acquisition and control program using agilent 34970 A

  Hello
  I realized an acquisition program of data with labview and agilent 34970, real-time acquisition works very well with a time you sample of a second... There is no problem
  to complete the program and control the taps installed in a photovoltaic system, pumping system
  I realized that a second program for the controlit is functional
  but the problem is when I merge the two programs in real-time
  This error is present at the execution of two programs at the same time, that is to say that they launch two request at the same time the instrument 34970 A
  (the poster of agilent 34970A labview crashes)

  -------------------------------------------------- --------------------------------------
  what I want is to find a little thing programming to manage two outgoing REQUESTS at the same time in LabVIEW instrument and create a kind of delay between two REQUESTS

  Sorry for the bad English

  Thank you

  If you are in the same executable, semaphores works well.  You lock the semaphore before making your order and demand.  Release after you get your data.  If the lock is already taken, then the semaphore just will wait until the lock is available.  Only one process can act both in this way.

• Trying to update channels in real time while controlling the Agilent 34970

  Hi all

  I got Aussie help on these forums and I hope that someone will be able to point me in the right direction with this problem. I'm still fairly new to LabVIEW please bear with me.

  I work with the LabVIEW driver for the Agilent 34970 connected on a GPIB-ENET 100/1000. The device was detected and works very well. The reason why I am writing today, what I'm trying to update the list channels in real-time. Currently I need to stop the whole process in order to modify the list of channels, but due to the nature of the tests we will occur, it is important that I can add more channels I want without interrupting the ongoing trials.

  I searched the forums and tried to change control of chain of channel for "Update of the value while typing" and "limit to the only line." The motivation behind the change of the latter was so that I could change the channel list and use the ENTER key to run. I also tried to create a while loop with shift registers but construction ws so clumsy that it does no more.

  I am sure that the change must take place as soon as the control of the chain, but is not certain since the pint is so he can reset which channels to scan and which appears lower in the VI. I have attached the VI I work with; It is a slightly modified version only Advanced Scan example of the driver.

  Thank you in advance,

  Yusif

  You might have added a registry to shift, but you're not actually compare anything. You compare the value of the control to the value of the data coming from the shift register to see if it has changed. If so, change the scan list.

  If you need to have a delay after you change the scan list, then you must add the delay within the business structure that calls the VI to reconfigure the scan list. You can use the late VI period causes the delay occur after you set up the analysis using the wires of the error to force the order of execution.

  P.S. Your naming scheme for screw means that you probably use a source code control system. If so, you would be well served by taking the time to discover the source control systems and installing a. It is very easy, and he has had several discussions in the LabVIEW forum on recommendations of source code control systems.

• I have Windows Vista on My Toshiba Satellite Harman/Kardon and Diablo 2 has compatibility issues

  I bought diablo 2 and I installed it on my computer and now I can't play because he says that the game has compatibility issues and I have tried all the recommended solutions and I always feel the question

  Hey Joe,

  Thanks for posting your query in Microsoft Community!

  I understand from the description of the issue, that you have problems to play Diablo 2. I will definitely help you with this problem.

  (1) what are the troubleshooting steps you performed for this problem?

  (2) have you made changes on the computer before this problem?

  (3) do you get an error message when you play the game?

  Method 1: I suggest you try to install the game Diablo-2 in Windows XP compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 2: If the problem persists, I suggest you to place the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 3 of the link to clean boot the computer to a normal startup mode.

  I hope this helps. Try the above steps and get back to us for assistance with the requested information. We will be happy to help you.

• Microsoft has stopped issuing licenses for windows 2008R2 Enterprise edition?

  Please specify if Microsoft has stopped issuing licenses for windows 2008 R2 64-bit Enterprise edition.

  Kind regards

  Aravind.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• "The program issued a command but the command length is incorrect" unable to open a session in windows xp any mode (safe mode, last known

  I am not able to connect to the windows xp system after Windows update. the following error message come on the logon screen after entering the user name and password.

  "The program issued a command but the command length is incorrect.

  I'm now trying the solution.

  try to run in the final... known good configuration does not

  trying to boot into safe mode... does not...

  does not work any other way...

  ... recovery console not able to connect

  repair system does not...

  ..

  only the format option left on my side...

  someone help me...

  Hi HarishLodhi,

  1. what happens when you try to connect to the Recovery Console?

  2 of repair of system are. which option you referring?

  You can try to connect to the Recovery Console by following this link. Subsequently, follow the steps in the link & check if the problem persists:

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, check the number of the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  How to recover from a corrupted registry that prevents Windows XP startup?

  Hope the helps of information.

• Microsoft has never issued an update for the Win7 disk defragment utility?

  Microsoft has never issued an update for the Win7 disk defragment utility?  Thank you.

  Original title: Win7 updates

  To my knowledge, the Defragmenter from Windows 7 has not been maintained since the liberation.  You have a problem with it?

• I was wondering how is my Acrobat 6.0 Professional Standard before I had no problem now, when I use it it says that the program has compatibility issues, I have windows 7 what can do... it worked before

  I am looking for help to fix this problem... I have not had any problems with my Acrobat 6.0 professional to create Word documents to PDF... now when I go to the for use there seems to be a problem

  He says that the program has some compatibility issues with Windows 7

  can anyone help please.

  It has never been compatible, or Windows 7, the first was 8.1. This is not to say that you can not have been lucky before.

• Configure 34970 has thermocouple

  Hi guys, I have a big problem here. I use a a 34970 Agilent has to acquire the temperature and using his driver for LabVIEW. So far, it's ok, but when I change the thermocouple type, change of Don t vi. Example: I choose to type t and run my vi, but the acquired data were wrong, because Don t vi to really change the type to termoccouple. It is indifferent for j-type back of my choice. How do I troubleshoot this?

  
  

• Several editing cascading errors or program issues

  My laptop has Windows Vista 64-bit and has recently been having several odd errors.

  -L' connection icon in the systray shows that it is not connected, regardless of their actual situation

  -L' power icon will not charge real-time level display (IE when it falls to 25%, I still see a full charge until it shuts down suddenly

  -Windows Live Onecare does not work or has stopped... (I can't uninstall and update to the point...)

  -I'm unable to install or uninstall a program for this machine.  It starts, then hang up

  -I can not also run programs like msconfig, etc..  Just does not open (looks like he took the command of cmdprompt, but never gives me a screen to interact with.)

  -I can also run most of the control panel (backup and restore, etc.).  I can open the control panel and click on the items, but get a blank screen that hangs unless I close it through Task Manager.

  Thank you!

  Thanks for the reply. It turns out that OneCare has been hung up it all along.  Once we understand how going beyond the issue of One Care, all the others have disappeared.

  Darrell.

• Misc PL/SQL based Application design/programming issues 101 (101.1)

  -* background for these questions is at the bottom of this post:
  
  Question 1:
  I read a little on the in and settings out and that IN "of reference" and OUT and IN-OUT are of value. For me "by reference" means "pointer" as in C programming. It seems to me that I could call a function with a parameter and NOT put it on the right side of an assignment statement. In other words, I call my function
  
  get_something (IN p_test1 varchar2) return varchar2;
  
  SP1 which has a variable named V_TEST1.
  
  So... can I do this? (method A):
  
  get_something (V_TEST1);
  
  or what I need to do this (method B):
  
  V_TEST1: = get_something (V_TEST1);
  
  In addition, even though it may disturb the thread (we'll see), it seems to me that IN, since the reference, will always be more effective. I have several concurrent users using this program: if it affects my thinking on this issue?
  
  
  
  
  
  
  -* background *

  far: < < I have read and am reading on the net, read and read books oracle oracle (to have a full account of safari), tome of Feurstein reading, have read the faq here.

  Situation Bottom Line: < < have a lot to do in a very short time. There's a lot riding on this. Any pointers will be appreciated. After we arrive at an undetermined time I can redo this adventure as a pl/sql faq and submit for publication (y ' alls call). Some questions may be hare brained just because I'm panicking a bit.

  Situation (long Version): < < write a pl/sql backend to the front-end MS Reporting Services. Everything started to pl/sql about 2 months ago. Took me forever to learn about Ref-Cursor as pipe between oracle and all client applications. I have now created a package. I've been programming for 20 years in many languages, but brand new to pl/sql. However, pl/sql sql has me released from the myriad of limitations in MS of the RS. My program is becoming big (for me - I do a lot a little) pks is currently 900 lines with 15 functions up to now. Currently SP (pls) is back up to 800 lines. I have some stuff in the sp then turn it into function and move it to the package.

  What does application?: < < < < back end for MS Reporting Services Web front-end. It will be a very controlled 'ad hoc' (or the illusion of the ad - hoc) web interface. All sql queries are built running and run through the "open cursor Ref for end - sql statement -;" the data that is returned through THE ref_cursor. Goal is to have nearly 100% of the features in a package. Composing the SP will be minimalist. Reports of the SP Services calls, passes X number of parameters and retrieves the ref_cursor.

  Oracle version: 10.2 (moving to 11g within the next 3 months).

  Environment: Huge DW in a massively shared environment. Everything is locked and requires a formal request. I had to have my authenticated for a few packets of DBMS system just to start simple pl/sql programs.

  Brad Bueche wrote:
  I read a little on the in and settings out and that IN "of reference" and OUT and IN-OUT are of value.

  And what it has to do with:

  V_TEST1: = get_something (V_TEST1);

  In any case, in Oracle, you cannot use function as:

  get_something (V_TEST1);

  and MUST use:

  V_TEST1: = get_something (V_TEST1);

  Now, if I understand by calling:

  get_something (V_TEST1);

  you think that a function that would change V_TEST1, it is not necessary to assign it again, right? If so, you cannot change IN parameter value.

  SY.