Agilent 34970 has with card 34903

Similar Questions

• Agilent 34970 has programming issues

  I have a tester with 10 stations, I use LabVIEW 2010 on Windows 7 platform with an Agilent 34970 system of data acquisition with the followwing cards installed in slot 1, this is one complete 34908A 40 channel MUX in Slot 2 is a chain of 20 34903 Accuator. The part of the program data acquisition runs a scan of the 40 channels inserting values into a table and then crosses a series of shared variables to turn on or off the power supply of my reading VI stations.   I have problems with the power switch. The scan works fine, the power turn on but turn off the next run of the analysis. The scanner shows also the errors and LabVIEW errors

  Do you mean the byte count entry? He is very precise instruments, but in most cases, is not something that you have to worry too calculate exactly. You can put a number of arbitrarily large and VISA playback will end automatically when the device sent to the whole of the buffer. The 500 bytes, which is in the example could have been just a random number that the programmer has decided to use.

• Input buffer overflow Agilent 34970 has

  IM using Agilent 34970 A for a blood pressure purpose, Im getting error 521 and 103 when I select more than 15 channels.

  I understand that 521 error is an input buffer overflow error. IM using one of my own live measurements.

  I measured the 40 channels at once and I never had an error, but when I use the VI attached the error im.

  I reference some of the threads that deal with the same problem, I have not found a solution.

  Thank you

  Eureka

  Thanks for the reply... I thought about it... had to set the unit in XON/XOFF mode so that it retains the values of the power input channels. I did notice that I made the changes in the configuration, while I was doing someother changes...

  @margasan,

  The post that you directed me was one of my own messages... but thanks anyway...

  Thank you

  Eureka

• Open ERRO agilent 34970 has

  Hello, I am brand new to Labview, I use a 34970A agilent. (I'm french, sorry for my English).
  I made a small program with agilent drivers for temperatures and it works.

  I would now like to measure a voltage. I can read it directly on the Panel prior to the agilent, BUT when I try to read it with the labview with the function of monitor program, the front indicates that the channel is open, it is not that I could read 1 minute before the façade.

  I don't understand the problem because my program is very simple and excutable, there is no problem of communication between the computer and the agilent, so I wonder with the agilent says that the canal is open...?

  I'm sorry for the bad explanation, I hope your understand my pain, I you give some pictures to illustrate my purposes.

  Thank you very much in advance

  
  

• Can someone help me on action with agilent 34970-34901 has continious

  I need assistance with 34970-34910 has continious measurements. Everyone says that you need to configure "Agilent 34970 has advanced Scan.vi". I have modified this vi to measure temperature and pressure (current) but I could not go a sterp before measuring very. How can I do this? I have attached the vi that I modified.

  I solved the issue of measuring continuous with Agilent 34970-34901 has. All my error is in the configuration of the usb serial port. To the continuous measurement, the flow of control of the usb serial port configuration must be implemented as 'XON/OFF' and the same setting should be made in the vi. You could measure temperature/voltage/current at the same time by doing this.

• Agilent 33250 has synchronized with DT9812

  Hello everyone,

  I'm trying to control two devices (Agilent 33250 A and card DAQ DT9812) synchronizedly using LabVIEW.
  I need excite a transducer using an arbitrary waveform generated by 33250 A burst mode with its frequency swept KHz x to Y KHz with a given increment. Breakup of period and number of cycles should also be adjustable.
  I am trying to send orders for the generator of signals via port GPIB using LabVIEW VIs.I have the necessary drivers. (Config Burst Modulation.VI under "ag33xxx.llb" and Agilent 33XXX series generate Arbitrary Waveform.vi under "examples" in the attached file) but I don't know how to combine these two.
  I contacted the instrument without any problem and I can take any form of arbitrary wave I want. I can also put the generator in burst mode, but I have to be able to do in a single VI.
  After that, I also need to synchronize the process such as the each time that the frequency of the waveform changes, data is acquired by the computer. I have the LV-LINK to control data acquisition card. I'd appreciate any help that gets at least started me off.

  Thanks in advance

  Deniz

  
  

• Agilent 16702 reader has with CVI?

  My logic analyzer of Agilent 16702 has no capability GPIB.

  The example Agilent online date of windows 3.1.

  He was provided with what we call the RPI (remote programming interface) but that doesn't quite work for me, too many missing instructions.

  I have it on the network with a domain name and an address.

  I can FTP to it, but can't get out surfing with Netscape 8 years installed.

  Someone at - it a recommendation and an example of a base?

  Given a program that just load a config file, I could understand the rest.

  LabWindows please, not of LabView.

  Thank you.

  Keywords for future research: RPI, 16700, 16702, Logic Analyzer, no. GPIB

  If someone has ever control a HP6700, I recommend without taking into account the documentation of the RPI and active-X controls

  You can send all orders using telnet CVI functions as described in the CVI help sections. t turns out to be a simple operation. Only thing is to get laps of memory right buffer, a minor effort compared with problems to make the recommended approach to work.

• Trying to update channels in real time while controlling the Agilent 34970

  Hi all

  I got Aussie help on these forums and I hope that someone will be able to point me in the right direction with this problem. I'm still fairly new to LabVIEW please bear with me.

  I work with the LabVIEW driver for the Agilent 34970 connected on a GPIB-ENET 100/1000. The device was detected and works very well. The reason why I am writing today, what I'm trying to update the list channels in real-time. Currently I need to stop the whole process in order to modify the list of channels, but due to the nature of the tests we will occur, it is important that I can add more channels I want without interrupting the ongoing trials.

  I searched the forums and tried to change control of chain of channel for "Update of the value while typing" and "limit to the only line." The motivation behind the change of the latter was so that I could change the channel list and use the ENTER key to run. I also tried to create a while loop with shift registers but construction ws so clumsy that it does no more.

  I am sure that the change must take place as soon as the control of the chain, but is not certain since the pint is so he can reset which channels to scan and which appears lower in the VI. I have attached the VI I work with; It is a slightly modified version only Advanced Scan example of the driver.

  Thank you in advance,

  Yusif

  You might have added a registry to shift, but you're not actually compare anything. You compare the value of the control to the value of the data coming from the shift register to see if it has changed. If so, change the scan list.

  If you need to have a delay after you change the scan list, then you must add the delay within the business structure that calls the VI to reconfigure the scan list. You can use the late VI period causes the delay occur after you set up the analysis using the wires of the error to force the order of execution.

  P.S. Your naming scheme for screw means that you probably use a source code control system. If so, you would be well served by taking the time to discover the source control systems and installing a. It is very easy, and he has had several discussions in the LabVIEW forum on recommendations of source code control systems.

• manage requests between acquisition and control program using agilent 34970 A

  Hello
  I realized an acquisition program of data with labview and agilent 34970, real-time acquisition works very well with a time you sample of a second... There is no problem
  to complete the program and control the taps installed in a photovoltaic system, pumping system
  I realized that a second program for the controlit is functional
  but the problem is when I merge the two programs in real-time
  This error is present at the execution of two programs at the same time, that is to say that they launch two request at the same time the instrument 34970 A
  (the poster of agilent 34970A labview crashes)

  -------------------------------------------------- --------------------------------------
  what I want is to find a little thing programming to manage two outgoing REQUESTS at the same time in LabVIEW instrument and create a kind of delay between two REQUESTS

  Sorry for the bad English

  Thank you

  If you are in the same executable, semaphores works well.  You lock the semaphore before making your order and demand.  Release after you get your data.  If the lock is already taken, then the semaphore just will wait until the lock is available.  Only one process can act both in this way.

• Solitare opens suddenly, with cards staked in a stack to the top left corner. I was not able to detach them to play a game. Help!

  Solitare opens suddenly, with cards staked in a stack to the top left corner.  I was not able to detach them to play a game.  Help!

  Hi Perren7,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  3. the sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If that is not enough then try to create a new user account and check what is happening. To create a new user account

  1. to open user accounts, click the Start button, select Control Panel, click user accounts and parental control, and then click user accounts.

  2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• X 51 R3 with cards gtx 10 x 0?

  Hi all

  I have a r3 watercooled with card stock gtx 970 alienware.  I use it with a live htc for development purposes, so that the machine will tend to be supported throughout the day.

  I'm intetested playing with some of the new features of nvidia, I'm looking at upgrading the dsra to one or the other gtx1070 or if I can a gtx1080.

  To be more efficient with the power I can I have replaced the hard drive for an SSD and I am tempted to temove wifi + bt card as I fon can't need for this platform.  I can't think of something more that I can in that respect to the power draw.

  I'm fine with temoving fan until I have the flat sitting pc instead of a tower.

  I see that the 1080 has 180w with 1070 to 150 w peak power.  The current gtx970 is 145w so I think that a 1070 must be fine power of sage.  I'm not so sure the 1080 so wrt power.

  What are the other ppls re electricity and heat dissapation thoughts?

  As an old pc gamer to come back into the fold, what brand of card gtx 10 x 0 tends to run cooler?

  Unfortunately, Dell does not have to validate video 10 x 0 cards in the X 51 series. My thoughts... you may not use any video card retail that uses more on our 330w power supply 150w so 150w 1070 is OK. The 1070 is 10.5 "if she is not suitable unless you remove the front fan PCI. You can also buy a double 6-pin power single 8 pin converter. I don't know what heat issues could arise in the absence of the PCI fan.

  Watch this video on the 1070 and the X 51 series.
  Watch this video on the 1080 in X 51 - R2 for instructions that apply.

• Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat No 4 GB

  Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat no limit 4 GB?

  For the VIDEO?

  Thank you

  Almost all of the Canon 'Vixia' line of cams are less than 1 k $. The Vixia HF G30 $1150 and it is the only model over $1 k.  Here are all the models to consumer prices.  (X XAnn, XFnnn, & XCnn series is top of the line, and of course the EOS film bodies are much more expensive.)

  As far as I know, they all supports SDXC cards.

• having problems with graphics acceleration in lightroom with card amd 2015 running drivers latest

  having problems with graphics acceleration in lightroom with card amd 2015 running latest drivers. It crashes every time that you do something to make anything with acceleration for example. develop module or turn it off

  Version of Lightroom: CC 2015.1 [1025654]

  License: Creative Cloud

  Operating system: Windows 7 Ultimate Edition

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 6

  Processor speed: 2.8 GHz

  Built-in memory: 16383,3 MB

  Real memory for Lightroom: 16383,3 MB

  Real memory used by Lightroom: 841,5 MB (5.1%)

  Virtual memory used by Lightroom: 853,0 MB

  Memory cache size: 261,4 MB

  Maximum thread count used by Camera Raw: 6

  Camera Raw SIMD optimization: SSE2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1600 x 900, 2) 1600 x 900

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  AMD Radeon HD 6800 Series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13397 context 15.200.1046.0 the base profile

  Renderer: AMD Radeon HD 6800 Series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: K:\hdd\photos\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\nathan\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) irista

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 6738

  Subsystem: e178174b

  Revision: 0

  Video memory: 1011

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Corsair Gaming H1500 helmet)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  You can disable the GPU manually by changing the preferences file to LR with a text editor such as notepad and change the line useAutoBahn = true to useAutoBahn = false.  You do not want to do with LR does not.

  On Windows, the LR file is located here:

  C:\Users\- yourusername -\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs

  You could make a backup copy of a file agprefs on your desktop, firstly, in the case where mess you something.

• Need advice with card problem mother strange network card.

  I have a question that is probably some kind of motherboard or power supply problem.
  The card connects with 72.2 Mbit for my wireless router mbit and 100 with the Integrated NIC.
  
  Right now I have bars of 4 out of 5 on the scale of connection and the router just outside the door, but when I try the card against the bredbandskollen.se it never give me more then 4 Mbps download and upload of 16-20. For now, it's 1.6 Mbit download and 8 Mbits upload both with radio and network card.
  
  All other computers on the network will download speed normal 25-55, laptops and other Pavilion with GFX and solid power supply.
  
  I even went up to buy a wireless extension, which can also be used with the thread, but the problem still there never more then download 4-5 Mbps.
  
  I have warranty still, but I feel stupid about the problem because the card is connected with the right speed to the network.
  
  But the rate of download and upload is far away.  And I'm sure that they will conclude that it is connected to good speed when they try against a router, but that's all the download and upload that seem to simply broken. I reinstalled OS even tried other external wireless card but the problem persists.
  
  Would it be the 500-112 eo with a graphics card hogging the PSU, well she was offered with this card, but the motherboard is basically a small size for laptops?
  
  Anyone else having a similar problem with the 500-112eo Pavilion
  
  I should let him return for service, and what could cause this kind of strange problem?

  Hey well today about 2-3 months after the end of the one year warranty, I'll watch some hockey. When I look at computer it seems stop by itself. Strange, I think push button / stop and here a big bang when the flaky PSU finally had enough.
  
  I don't know what to say that it is a shame that HP sells undersized PSU:s in their computers. I knew from the start that there was something strange going on because of the bad connection Wifi, and how it seemed dependent on how many USB devices.
  
  I was smart enough to not send it to HP technicians, it probably saved me 100 euros. Because they would be claimed I had a faulthy complain and charged me. How can you prove there are issues of power.
  
  I'm just glad the monitor didn't die with the 500-112eo pavilion, because it looked like a shot and took the fuse 10amp in the room with her. Tried to move the HARD drive to the external firm to save a date he sounds like a sound signal in agony and refuse to spinn upward.
  
  So I guess that the PSU has HARD drive, mothercard, UC and memories with her on his farewell greatness.
  
  3 years and I would not protest, but 15 months HP should be ashamed of the technician putting this motherboard with this PSU and even more to sell the thing for 500 euros.
  
  Shame on you.

• Can't play CRYSIS and GEARS OF WAR on portable computer with card Nvidia 7900 GS?

  I wonder if anyone here have the chance to play two games CRYSIS and GEARS OF WAR on PC Toshiba laptop with Nvidia 7900 GS cards.

  The reason why I asked this question-> because I have 2 problems:

  (1) GEARS OF WAR first need new driver for Nvidia telling me this massage * to run Gears of War with your current hardware configuration, you must install the following software update or updates: *.

  * + NVIDIA ForceWare 163.44 driver *.

  * If you do not install this software, at some point, the game ends and your progress will be the lost.* and give me another massege when I click on play

  the massage is * this application has failed to start because xlive.dll not found. Reinstalling the application may fix this problem *.

  (2) on CRYSIS game working, but with very poor quality and a few fast breaks during playback I tried to graph affecting minimum put the same thing happen...

  I hope that someone here can give some advice on the above issues, and a suggestion for a new driver will be appreciated ;)

  see you soon
  abman

  Hello

  _ _Regarding point 1)

  Check out the www.laptopvideo2go.com site and to update the graphics driver!
  This site contains some useful nVidia drivers that can run on laptops.
  But note; pilots can be used only at your own risk!

  _ _Regarding point 2)

  Crysis needs huge resources for laptop. I think that the card Nvidia 7900 GS is not strong enough to run the game with full graphic details!
  I read on some game sites that you need a desktop PC of very high technology with that of the new series of nVidia 8600 to the smooth running of the game!

  Best regards